Post here success logs with RIFF JTAG Manager 1.64 and fw 1.41 - Page 59 - GSM-Forum

M0YAL · 10-05-2011, 09:30

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [Sungil SXC1080]

Connecting to the dead body...OK
Detected dead body ID: 0x3F0F0F0F - CORRECT!
Set I/O Voltage reads as 3.00V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x22E0 (8MB)
Selected Resurrection Data for the NOR Chip with IDs: 0x00EC/0x22E0

Flashing the dead body...OK
Resurrection complete!

M0YAL · 10-05-2011, 09:51

Quote:

Originally Posted by gitesh

I was trying to unlock to my tata indicom 1x usb modem sxc 1080. It is unsuccessful and now it is totally dead . Can i make it repaire if yes then how. Which hardware i will need and which software . Please guide me in this regard.

yes U Can Recover Your Modem

please Download Sungil SXC1080.DLL

dll contains pinout, repair instructions and required repair files

Code:

Resurrecting Sungil SXC1080 is simple.
Current resurrector contains Firmware and EEPROM zones for memory chip with ID 0x00EC/0x22E0
 To resurrect Sungil SXC1080:
  Solder JTAG cable to Sungil SXC1080 JTAG pads;
 Attach battery or external power supply;
 Make sure Sungil SXC1080 is selected in the list of models;
 Click Resurrect button;
 Choose which areas to flash;
 Wait till software signals a successful operation completion;
 De-solder JTAG wires;

Success Story See Here

http://forum.gsmhosting.com/vbb/7775608-post273.html

blaw · 10-05-2011, 17:20

Code:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [HTC Magic 32B]

Connecting to the dead body...OK
Detected dead body ID: 0xA01700E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00AD/0x55BC (512MB)
Selected Unlocking Data for the NAND Chip with Page size = 2KB

Unlocking the Phone...OK
Unlock complete!

rebi_cell · 10-06-2011, 11:14

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [Huawei C2901M]

Connecting to the dead body...OK
Detected dead body ID: 0x220B10E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0020/0x8848 (8MB)
Flashing the dead body...OK
Resurrection complete!

farodriguez · 10-06-2011, 22:19

8 X HTC IMAGIO

Code:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.27, JTAG Manager Version: 1.36
Selected Resurrector: [HTC Imagio]

Connecting to the dead body...OK
Detected dead body ID: 0x301000E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x55BC (512MB)
Unlocking the Phone...OK
Unlock complete!

barisyalcin · 10-07-2011, 09:24

rtck 20 khz ok.. thanks riff team...

MOHIT_THAREJA · 10-08-2011, 10:04

huawei c2206 restart repair done

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.27, JTAG Manager Version: 1.36
Selected Resurrector: [QSC60XX L20 D08]

Connecting to the dead body...OK
Detected dead body ID: 0x200B10E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]
Settings Code: 0x0900010000800000000000000026

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x017E/0x221A (4MB)

Writting FLASH1 memory from 0x0000000000 to 0x00003FFFFF
Completed in 00:03:02.532 (Average Transfer Rate: 22.44 kB/s)

MOHIT_THAREJA · 10-08-2011, 10:56

huawei c2821 recover done

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.27, JTAG Manager Version: 1.36
Selected Resurrector: [QSC60XX L20 D08]

Connecting to the dead body...OK
Detected dead body ID: 0x200B10E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]
Settings Code: 0x0900010000400000000000000026

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0089/0x8852 (4MB)

Writting FLASH1 memory from 0x0000000000 to 0x00003FFFFF
Completed in 00:03:10.797 (Average Transfer Rate: 21.47 kB/s)

MOHIT_THAREJA · 10-08-2011, 14:24

intex in50 recover done

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.27, JTAG Manager Version: 1.36
Selected Resurrector: [QSC60XX L20 D08]

Connecting to the dead body...OK
Detected dead body ID: 0x220B10E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]
Settings Code: 0x0900010001000000000000000026

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0020/0x882E (16MB)

Writting FLASH1 memory from 0x0000000000 to 0x0000FFFFFF
Completed in 00:12:10.718 (Average Transfer Rate: 22.42 kB/s)

MOHIT_THAREJA · 10-08-2011, 16:25

huawei c2605 recover done

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.27, JTAG Manager Version: 1.36
Selected Resurrector: [QSC60XX L20 D08]

Connecting to the dead body...OK
Detected dead body ID: 0x200B10E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]
Settings Code: 0x0900010001000000000000000026

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0089/0x8852 (4MB)

Writting FLASH1 memory from 0x0000000000 to 0x00003FFFFF
Completed in 00:03:07.032 (Average Transfer Rate: 21.90 kB/s)

nandkishorgupta · 10-09-2011, 12:49

succesful reapiring of huawei c2830 by riff jtag it is great

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [Huawei C2830]

Connecting to the dead body...OK
Detected dead body ID: 0x122CE0E1 - IGNORED!
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]
Settings Code: 0x0900010000400000000000000024

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0020/0x88C0 (8MB)

Writting FLASH1 memory from 0x0000000000 to 0x00007FFFFF
Completed in 00:05:58.625 (Average Transfer Rate: 22.84 kB/s)

ashraf_bcs · 10-09-2011, 13:37

MOHIT_THAREJA · 10-11-2011, 17:21

intex in 50 again recover done

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.27, JTAG Manager Version: 1.36
Selected Resurrector: [QSC60XX L24 D08]

Connecting to the dead body...OK
Detected dead body ID: 0x200B10E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]
Settings Code: 0x0900010000800000000000000026

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0020/0x882E (16MB)

Writting FLASH1 memory from 0x0000000000 to 0x0000FFFFFF
ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK
Completed in 00:12:10.906 (Average Transfer Rate: 22.42 kB/s)

jay19x · 10-14-2011, 08:09

Code:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.27, JTAG Manager Version: 1.36
Selected Resurrector: [Samsung S5660]

Connecting to the dead body...OK
Detected dead body ID: 0x303C10E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
Flashing the dead body...OK
Resurrection complete!

samsung s5660 done

Jaipur_Telecom · 10-15-2011, 09:17

lg 3500 sucess recover

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.27, JTAG Manager Version: 1.29
Selected Resurrector: [LG RD3500]

Connecting to the dead body...OK
Detected dead body ID: 0x200B10E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is 1 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x0089/0x8863 (4MB)
Flashing the dead body...OK
Resurrection complete!

10-05-2011, 09:30	#871 (permalink)
M0YAL No Life Poster Join Date: May 2011 Location: india Posts: 1,679 Member: 1583254 Status: Offline Sonork: 100.1602320 Thanks Meter: 4,792	Sungil SXC1080 Done Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.35 Selected Resurrector: [Sungil SXC1080] Connecting to the dead body...OK Detected dead body ID: 0x3F0F0F0F - CORRECT! Set I/O Voltage reads as 3.00V, TCK Frequency is 8 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x22E0 (8MB) Selected Resurrection Data for the NOR Chip with IDs: 0x00EC/0x22E0 Flashing the dead body...OK Resurrection complete!

10-06-2011, 11:14	#874 (permalink)
rebi_cell Freak Poster Join Date: Nov 2001 Location: bandung Posts: 189 Member: 7103 Status: Offline Thanks Meter: 48	huwaei c2823 sucsesfull Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.35 Selected Resurrector: [Huawei C2901M] Connecting to the dead body...OK Detected dead body ID: 0x220B10E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0020/0x8848 (8MB) Flashing the dead body...OK Resurrection complete!

10-09-2011, 13:37	#882 (permalink)
ashraf_bcs No Life Poster Join Date: Jun 2006 Location: Bangladesh Posts: 2,545 Member: 303373 Status: Offline Sonork: 100.1584377 Thanks Meter: 1,241	I9000 done with first touch...

10-08-2011, 10:04	#877 (permalink)
MOHIT_THAREJA No Life Poster Join Date: Oct 2009 Location: India [UNKNOWN] Posts: 3,257 Member: 1143809 Status: Offline Sonork: 100.1602432 Thanks Meter: 574	huawei c2206 restart repair done Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.27, JTAG Manager Version: 1.36 Selected Resurrector: [QSC60XX L20 D08] Connecting to the dead body...OK Detected dead body ID: 0x200B10E1 - CORRECT! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz] Settings Code: 0x0900010000800000000000000026 Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x017E/0x221A (4MB) Writting FLASH1 memory from 0x0000000000 to 0x00003FFFFF Completed in 00:03:02.532 (Average Transfer Rate: 22.44 kB/s)

10-08-2011, 10:56	#878 (permalink)
MOHIT_THAREJA No Life Poster Join Date: Oct 2009 Location: India [UNKNOWN] Posts: 3,257 Member: 1143809 Status: Offline Sonork: 100.1602432 Thanks Meter: 574	huawei c2821 recover done Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.27, JTAG Manager Version: 1.36 Selected Resurrector: [QSC60XX L20 D08] Connecting to the dead body...OK Detected dead body ID: 0x200B10E1 - CORRECT! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz] Settings Code: 0x0900010000400000000000000026 Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0089/0x8852 (4MB) Writting FLASH1 memory from 0x0000000000 to 0x00003FFFFF Completed in 00:03:10.797 (Average Transfer Rate: 21.47 kB/s)

10-08-2011, 14:24	#879 (permalink)
MOHIT_THAREJA No Life Poster Join Date: Oct 2009 Location: India [UNKNOWN] Posts: 3,257 Member: 1143809 Status: Offline Sonork: 100.1602432 Thanks Meter: 574	intex in50 recover done Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.27, JTAG Manager Version: 1.36 Selected Resurrector: [QSC60XX L20 D08] Connecting to the dead body...OK Detected dead body ID: 0x220B10E1 - CORRECT! Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz] Settings Code: 0x0900010001000000000000000026 Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0020/0x882E (16MB) Writting FLASH1 memory from 0x0000000000 to 0x0000FFFFFF Completed in 00:12:10.718 (Average Transfer Rate: 22.42 kB/s)

10-08-2011, 16:25	#880 (permalink)
MOHIT_THAREJA No Life Poster Join Date: Oct 2009 Location: India [UNKNOWN] Posts: 3,257 Member: 1143809 Status: Offline Sonork: 100.1602432 Thanks Meter: 574	huawei c2605 recover done Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.27, JTAG Manager Version: 1.36 Selected Resurrector: [QSC60XX L20 D08] Connecting to the dead body...OK Detected dead body ID: 0x200B10E1 - CORRECT! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz] Settings Code: 0x0900010001000000000000000026 Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0089/0x8852 (4MB) Writting FLASH1 memory from 0x0000000000 to 0x00003FFFFF Completed in 00:03:07.032 (Average Transfer Rate: 21.90 kB/s)

10-09-2011, 12:49	#881 (permalink)
nandkishorgupta Registered User Join Date: Mar 2010 Posts: 237 Member: 1260168 Status: Offline Thanks Meter: 62	succesful reapiring of huawei c2830 by riff jtag it is great Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.35 Selected Resurrector: [Huawei C2830] Connecting to the dead body...OK Detected dead body ID: 0x122CE0E1 - IGNORED! Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz] Settings Code: 0x0900010000400000000000000024 Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0020/0x88C0 (8MB) Writting FLASH1 memory from 0x0000000000 to 0x00007FFFFF Completed in 00:05:58.625 (Average Transfer Rate: 22.84 kB/s)

10-11-2011, 17:21	#883 (permalink)
MOHIT_THAREJA No Life Poster Join Date: Oct 2009 Location: India [UNKNOWN] Posts: 3,257 Member: 1143809 Status: Offline Sonork: 100.1602432 Thanks Meter: 574	intex in 50 again recover done Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.27, JTAG Manager Version: 1.36 Selected Resurrector: [QSC60XX L24 D08] Connecting to the dead body...OK Detected dead body ID: 0x200B10E1 - CORRECT! Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz] Settings Code: 0x0900010000800000000000000026 Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0020/0x882E (16MB) Writting FLASH1 memory from 0x0000000000 to 0x0000FFFFFF ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK Completed in 00:12:10.906 (Average Transfer Rate: 22.42 kB/s)

10-15-2011, 09:17	#885 (permalink)
Jaipur_Telecom No Life Poster Join Date: Sep 2009 Location: I-N-D-I-A Age: 33 Posts: 519 Member: 1119248 Status: Offline Sonork: 000000000000000000000000 Thanks Meter: 139	lg 3500 sucess recover Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.27, JTAG Manager Version: 1.29 Selected Resurrector: [LG RD3500] Connecting to the dead body...OK Detected dead body ID: 0x200B10E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is 1 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x0089/0x8863 (4MB) Flashing the dead body...OK Resurrection complete!