Post here success logs with RIFF JTAG Manager 1.64 and fw 1.41 - Page 14 - GSM-Forum

Boshko_Alfa · 12-03-2010, 19:54

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.15, JTAG Manager Version: 1.19
Selected Resurrector: [HTC Legend]

Connecting to the dead body...OK
Detected dead body ID: 0x203C00E1 - IGNORED!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB)
Unlocking the Phone...OK
Unlock complete!

Boshko_Alfa · 12-03-2010, 20:01

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.15, JTAG Manager Version: 1.19
Selected Resurrector: [HTC WildFire]

Connecting to the dead body...OK
Detected dead body ID: 0xC01B30E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB)
Unlocking the Phone...OK
Unlock complete!

Boshko_Alfa · 12-03-2010, 20:27

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.15, JTAG Manager Version: 1.19
Selected Resurrector: [HTC Hero]

Connecting to the dead body...OK
Detected dead body ID: 0x301700E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x002C/0x55BC (512MB)
Unlocking the Phone...OK
Unlock complete!

Boshko_Alfa · 12-03-2010, 21:17

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.15, JTAG Manager Version: 1.19
Selected Resurrector: [HTC Hero]

Connecting to the dead body...OK
Detected dead body ID: 0x301700E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB)
Unlocking the Phone...OK
Unlock complete!

EpromMarko · 12-04-2010, 11:38

Text :

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.15, JTAG Manager Version: 1.19
Selected Resurrector: [HTC Tattoo]

Connecting to the dead body...OK
Detected dead body ID: 0xC01B00E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x002C/0x55BC (512MB)
Unlocking the Phone...OK
Unlock complete!

Image

Boshko_Alfa · 12-04-2010, 14:27

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.15, JTAG Manager Version: 1.19
Selected Resurrector: [HTC Desire]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 2 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB)
Unlocking the Phone...OK
Unlock complete!

bk.gsm · 12-05-2010, 16:23

S5230 with micron chip repaired successfully in 4 seconds

here is the log with screen shote:

with best regards

deepakgarg · 12-06-2010, 15:41

Boshko_Alfa · 12-06-2010, 22:16

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.15, JTAG Manager Version: 1.19
Selected Resurrector: [HTC Desire]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB)
Unlocking the Phone...OK
Unlock complete!

multicom_fsdpk · 12-07-2010, 16:10

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.15, JTAG Manager Version: 1.19
Selected Resurrector: [HTC Nexus]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is 1 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB)
Flashing the dead body...OK
Resurrection complete!

maplegsm · 12-08-2010, 10:46

Br

UMER

irfanamin2 · 12-08-2010, 11:08

Mate! nice job!!!!!!!

Boshko_Alfa · 12-08-2010, 14:16

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.15, JTAG Manager Version: 1.19
Selected Resurrector: [HTC Hero]

Connecting to the dead body...OK
Detected dead body ID: 0x301700E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 2 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB)
Unlocking the Phone...OK
Unlock complete!

MDK23 · 12-10-2010, 00:34

2 X G1 DONE WITH RIFFBOX

BesTCooL · 12-10-2010, 13:22

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.15, JTAG Manager Version: 1.19
Selected Resurrector: [HTC Legend]

Connecting to the dead body...OK
Detected dead body ID: 0x203C00E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB)
Unlocking the Phone...OK
Unlock complete!

Uploaded with ImageShack.us

12-06-2010, 15:41	#203 (permalink)
deepakgarg No Life Poster Join Date: Jan 2006 Location: Chandigarh,India Age: 40 Posts: 5,790 Member: 220603 Status: Offline Thanks Meter: 1,164	htc dream resurrected successfully

12-07-2010, 16:10	#205 (permalink)
multicom_fsdpk No Life Poster Join Date: Jul 2007 Location: PK Posts: 659 Member: 539052 Status: Offline Sonork: 100.1585495 Thanks Meter: 119	nexus successful....... Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.15, JTAG Manager Version: 1.19 Selected Resurrector: [HTC Nexus] Connecting to the dead body...OK Detected dead body ID: 0x202400E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is 1 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB) Flashing the dead body...OK Resurrection complete!

12-08-2010, 10:46	#206 (permalink)
maplegsm No Life Poster Join Date: Nov 2006 Location: Bulgaria/China Age: 58 Posts: 4,312 Member: 391664 Status: Offline Sonork: Python Thanks Meter: 1,063	Amoi skype wp-s1 dead repair/full flash ok!! Br UMER

12-10-2010, 00:34	#209 (permalink)
MDK23 No Life Poster Join Date: Mar 2007 Location: ALGERIA Age: 17 Posts: 3,165 Member: 467636 Status: Offline Sonork: Double Kanon Thanks Meter: 2,654	2 x g1 done with riffbox 2 X G1 DONE WITH RIFFBOX

12-10-2010, 13:22	#210 (permalink)
BesTCooL No Life Poster Join Date: Dec 2002 Location: TURKEY Age: 44 Posts: 3,285 Member: 18442 Status: Offline Sonork: 111110 Thanks Meter: 622	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.15, JTAG Manager Version: 1.19 Selected Resurrector: [HTC Legend] Connecting to the dead body...OK Detected dead body ID: 0x203C00E1 - CORRECT! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB) Unlocking the Phone...OK Unlock complete! Uploaded with ImageShack.us Last edited by BesTCooL; 12-10-2010 at 13:29.

12-03-2010, 19:54	#196 (permalink)
Boshko_Alfa No Life Poster Join Date: Mar 2007 Location: Skopje, Macedonia Age: 36 Posts: 4,244 Member: 472933 Status: Offline Sonork: 100.1590967 Thanks Meter: 1,331	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.15, JTAG Manager Version: 1.19 Selected Resurrector: [HTC Legend] Connecting to the dead body...OK Detected dead body ID: 0x203C00E1 - IGNORED! Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB) Unlocking the Phone...OK Unlock complete!

12-03-2010, 20:01	#197 (permalink)
Boshko_Alfa No Life Poster Join Date: Mar 2007 Location: Skopje, Macedonia Age: 36 Posts: 4,244 Member: 472933 Status: Offline Sonork: 100.1590967 Thanks Meter: 1,331	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.15, JTAG Manager Version: 1.19 Selected Resurrector: [HTC WildFire] Connecting to the dead body...OK Detected dead body ID: 0xC01B30E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB) Unlocking the Phone...OK Unlock complete!

12-03-2010, 20:27	#198 (permalink)
Boshko_Alfa No Life Poster Join Date: Mar 2007 Location: Skopje, Macedonia Age: 36 Posts: 4,244 Member: 472933 Status: Offline Sonork: 100.1590967 Thanks Meter: 1,331	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.15, JTAG Manager Version: 1.19 Selected Resurrector: [HTC Hero] Connecting to the dead body...OK Detected dead body ID: 0x301700E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x002C/0x55BC (512MB) Unlocking the Phone...OK Unlock complete!

12-03-2010, 21:17	#199 (permalink)
Boshko_Alfa No Life Poster Join Date: Mar 2007 Location: Skopje, Macedonia Age: 36 Posts: 4,244 Member: 472933 Status: Offline Sonork: 100.1590967 Thanks Meter: 1,331	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.15, JTAG Manager Version: 1.19 Selected Resurrector: [HTC Hero] Connecting to the dead body...OK Detected dead body ID: 0x301700E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB) Unlocking the Phone...OK Unlock complete!

12-04-2010, 11:38	#200 (permalink)
EpromMarko Insane Poster Join Date: Jun 2010 Location: Zemun , SRBIJA Posts: 93 Member: 1322048 Status: Offline Thanks Meter: 20	Text : Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.15, JTAG Manager Version: 1.19 Selected Resurrector: [HTC Tattoo] Connecting to the dead body...OK Detected dead body ID: 0xC01B00E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x002C/0x55BC (512MB) Unlocking the Phone...OK Unlock complete! Image

12-04-2010, 14:27	#201 (permalink)
Boshko_Alfa No Life Poster Join Date: Mar 2007 Location: Skopje, Macedonia Age: 36 Posts: 4,244 Member: 472933 Status: Offline Sonork: 100.1590967 Thanks Meter: 1,331	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.15, JTAG Manager Version: 1.19 Selected Resurrector: [HTC Desire] Connecting to the dead body...OK Detected dead body ID: 0x202400E1 - CORRECT! Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 2 MHz] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB) Unlocking the Phone...OK Unlock complete!

12-05-2010, 16:23	#202 (permalink)
bk.gsm Product Supporter Join Date: Sep 2008 Location: UMT Support section Age: 33 Posts: 3,776 Member: 869809 Status: Offline Thanks Meter: 1,708	S5230 with micron chip repaired successfully in 4 seconds here is the log with screen shote: with best regards

12-06-2010, 22:16	#204 (permalink)
Boshko_Alfa No Life Poster Join Date: Mar 2007 Location: Skopje, Macedonia Age: 36 Posts: 4,244 Member: 472933 Status: Offline Sonork: 100.1590967 Thanks Meter: 1,331	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.15, JTAG Manager Version: 1.19 Selected Resurrector: [HTC Desire] Connecting to the dead body...OK Detected dead body ID: 0x202400E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB) Unlocking the Phone...OK Unlock complete!

12-08-2010, 11:08	#207 (permalink)
irfanamin2 No Life Poster Join Date: Sep 2004 Posts: 3,784 Member: 82423 Status: Offline Thanks Meter: 1,203	Mate! nice job!!!!!!!

12-08-2010, 14:16	#208 (permalink)
Boshko_Alfa No Life Poster Join Date: Mar 2007 Location: Skopje, Macedonia Age: 36 Posts: 4,244 Member: 472933 Status: Offline Sonork: 100.1590967 Thanks Meter: 1,331	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.15, JTAG Manager Version: 1.19 Selected Resurrector: [HTC Hero] Connecting to the dead body...OK Detected dead body ID: 0x301700E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 2 MHz] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB) Unlocking the Phone...OK Unlock complete!