Post here success logs with RIFF JTAG Manager 1.64 and fw 1.41 - Page 17 - GSM-Forum

rico1 · 12-16-2010, 20:15

New hw desire repaired

desire fastboot mode

fflyx · 12-17-2010, 15:20

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.16, JTAG Manager Version: 1.20
Selected Resurrector: [HTC Magic 32A]

Connecting to the dead body...OK
Detected dead body ID: 0x301700E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x002C/0x55BC (512MB)
Flashing the dead body...OK
Resurrection complete!

Boshko_Alfa · 12-17-2010, 16:07

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.15, JTAG Manager Version: 1.19
Selected Resurrector: [HTC Legend]

Connecting to the dead body...OK
Detected dead body ID: 0x203C00E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB)
Unlocking the Phone...OK
Unlock complete!

Boshko_Alfa · 12-17-2010, 16:32

ranagaurav · 12-17-2010, 20:24

here is proof i done maney set without problem

Quote:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.16, JTAG Manager Version: 1.20
Selected Resurrector: [Huawei C2806M]

Connecting to the dead body...OK
Detected dead body ID: 0x220B10E1 - IGNORED!
Set I/O Voltage reads as 2.61V, TCK Frequency is 4 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x257E (8MB)

Writting FLASH1 memory from 0x00000000 to 0x007FFFFF
Completed in 00:02:46.390 (Average Transfer Rate: 49.23 kB/s)

Nurettin Duman · 12-18-2010, 13:26

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.15, JTAG Manager Version: 1.19
Selected Resurrector: [Samsung i900 Modem]

Connecting to the dead body...OK
Detected dead body ID: 0xA00C00E1 - CORRECT!
Set I/O Voltage reads as 2.78V, TCK Frequency is 10 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0076 (64MB)
Flashing the dead body...OK
Resurrection complete!

Boshko_Alfa · 12-18-2010, 17:39

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.16, JTAG Manager Version: 1.20
Selected Resurrector: [HTC WildFire]

Connecting to the dead body...OK
Detected dead body ID: 0xC01B30E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB)
Unlocking the Phone...OK
Unlock complete!

ranagaurav · 12-20-2010, 20:24

here is image

fflyx · 12-20-2010, 22:50

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.16, JTAG Manager Version: 1.20
Selected Resurrector: [HTC Imagio]

Connecting to the dead body...OK
Detected dead body ID: 0x301000E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB)
Flashing the dead body...OK
Resurrection complete!

fflyx · 12-20-2010, 22:51

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.16, JTAG Manager Version: 1.20
Selected Resurrector: [HTC Imagio]

Connecting to the dead body...OK
Detected dead body ID: 0x301000E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB)
Unlocking the Phone...OK
Unlock complete!

valiu · 12-21-2010, 11:11

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.16, JTAG Manager Version: 1.20
Selected Resurrector: [HTC WildFire]

Connecting to the dead body...OK
Detected dead body ID: 0xC01B30E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB)
Unlocking the Phone...OK
Unlock complete!

multicom_fsdpk · 12-21-2010, 11:43

galijus · 12-21-2010, 12:23

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.16, JTAG Manager Version: 1.19
Selected Resurrector: [HTC WildFire]

Connecting to the target...OK
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK

Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0xC01B30E1, IR Length = 0x04 bits
Total IR length: 0x0004 bits

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.16, JTAG Manager Version: 1.19
Selected Resurrector: [HTC WildFire]

Connecting to the dead body...OK
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Model selected: HTC - HTC WildFire

Detected dead body ID: 0xC01B30E1

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.16, JTAG Manager Version: 1.19
Selected Resurrector: [HTC WildFire]

Connecting to the dead body...OK
Detected dead body ID: 0xC01B30E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB)
Unlocking the Phone...OK
Unlock complete!

zeljko66 · 12-21-2010, 20:00

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.16, JTAG Manager Version: 1.20
Selected Resurrector: [HTC Dream (G1)]

Connecting to the dead body...OK
Detected dead body ID: 0xA01700E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is 12 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x15AA (256MB)
Flashing the dead body...OK
Resurrection complete!

failed to unlock ~ I need help

Boshko_Alfa · 12-21-2010, 21:01

Phone still ask for NCK code or u don't have network?
btw this is not thread for that question.

12-17-2010, 15:20	#242 (permalink)
fflyx Freak Poster Join Date: Jan 2010 Posts: 454 Member: 1208833 Status: Offline Sonork: 100.1590402 Thanks Meter: 142	HTC Magic Resurrected Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.16, JTAG Manager Version: 1.20 Selected Resurrector: [HTC Magic 32A] Connecting to the dead body...OK Detected dead body ID: 0x301700E1 - CORRECT! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x002C/0x55BC (512MB) Flashing the dead body...OK Resurrection complete!

12-20-2010, 20:24	#248 (permalink)
ranagaurav No Life Poster Join Date: Nov 2008 Location: gsm hosting Posts: 5,609 Member: 907098 Status: Offline Sonork: 100.1601140 Thanks Meter: 705	lg rd3000 repier secsessfully here is image

12-20-2010, 22:50	#249 (permalink)
fflyx Freak Poster Join Date: Jan 2010 Posts: 454 Member: 1208833 Status: Offline Sonork: 100.1590402 Thanks Meter: 142	HTC Imagio Resurrected Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.16, JTAG Manager Version: 1.20 Selected Resurrector: [HTC Imagio] Connecting to the dead body...OK Detected dead body ID: 0x301000E1 - CORRECT! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB) Flashing the dead body...OK Resurrection complete!

12-20-2010, 22:51	#250 (permalink)
fflyx Freak Poster Join Date: Jan 2010 Posts: 454 Member: 1208833 Status: Offline Sonork: 100.1590402 Thanks Meter: 142	HTC Imagio Unlock done! Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.16, JTAG Manager Version: 1.20 Selected Resurrector: [HTC Imagio] Connecting to the dead body...OK Detected dead body ID: 0x301000E1 - CORRECT! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB) Unlocking the Phone...OK Unlock complete!

12-21-2010, 11:11	#251 (permalink)
valiu No Life Poster Join Date: Jul 2003 Location: Romania, Fagaras Age: 46 Posts: 960 Member: 34379 Status: Offline Thanks Meter: 101	another wildfire unlock Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.16, JTAG Manager Version: 1.20 Selected Resurrector: [HTC WildFire] Connecting to the dead body...OK Detected dead body ID: 0xC01B30E1 - CORRECT! Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB) Unlocking the Phone...OK Unlock complete!

12-16-2010, 20:15	#241 (permalink)
rico1 No Life Poster Join Date: Jul 2001 Location: handline Age: 48 Posts: 788 Member: 5397 Status: Offline Thanks Meter: 38	New hw desire repaired desire fastboot mode

12-17-2010, 16:07	#243 (permalink)
Boshko_Alfa No Life Poster Join Date: Mar 2007 Location: Skopje, Macedonia Age: 36 Posts: 4,244 Member: 472933 Status: Offline Sonork: 100.1590967 Thanks Meter: 1,331	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.15, JTAG Manager Version: 1.19 Selected Resurrector: [HTC Legend] Connecting to the dead body...OK Detected dead body ID: 0x203C00E1 - CORRECT! Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB) Unlocking the Phone...OK Unlock complete!

12-17-2010, 16:32	#244 (permalink)
Boshko_Alfa No Life Poster Join Date: Mar 2007 Location: Skopje, Macedonia Age: 36 Posts: 4,244 Member: 472933 Status: Offline Sonork: 100.1590967 Thanks Meter: 1,331

12-18-2010, 17:39	#247 (permalink)
Boshko_Alfa No Life Poster Join Date: Mar 2007 Location: Skopje, Macedonia Age: 36 Posts: 4,244 Member: 472933 Status: Offline Sonork: 100.1590967 Thanks Meter: 1,331	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.16, JTAG Manager Version: 1.20 Selected Resurrector: [HTC WildFire] Connecting to the dead body...OK Detected dead body ID: 0xC01B30E1 - CORRECT! Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB) Unlocking the Phone...OK Unlock complete!

12-21-2010, 11:43	#252 (permalink)
multicom_fsdpk No Life Poster Join Date: Jul 2007 Location: PK Posts: 659 Member: 539052 Status: Offline Sonork: 100.1585495 Thanks Meter: 119	HD2 successful repair...............

12-21-2010, 12:23	#253 (permalink)
galijus No Life Poster Join Date: Oct 2009 Location: serbia Age: 44 Posts: 971 Member: 1131244 Status: Offline Sonork: 100.1596724 Thanks Meter: 376	htc wildfire one more time Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.16, JTAG Manager Version: 1.19 Selected Resurrector: [HTC WildFire] Connecting to the target...OK Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK Following devices are found on the JTAG chain: Device on TAP #0: ID = 0xC01B30E1, IR Length = 0x04 bits Total IR length: 0x0004 bits Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.16, JTAG Manager Version: 1.19 Selected Resurrector: [HTC WildFire] Connecting to the dead body...OK Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK Model selected: HTC - HTC WildFire Detected dead body ID: 0xC01B30E1 Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.16, JTAG Manager Version: 1.19 Selected Resurrector: [HTC WildFire] Connecting to the dead body...OK Detected dead body ID: 0xC01B30E1 - CORRECT! Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB) Unlocking the Phone...OK Unlock complete!

12-21-2010, 20:00	#254 (permalink)
zeljko66 Insane Poster Join Date: Aug 1999 Posts: 83 Member: 446 Status: Offline Thanks Meter: 2	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.16, JTAG Manager Version: 1.20 Selected Resurrector: [HTC Dream (G1)] Connecting to the dead body...OK Detected dead body ID: 0xA01700E1 - CORRECT! Set I/O Voltage reads as 2.60V, TCK Frequency is 12 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x15AA (256MB) Flashing the dead body...OK Resurrection complete! failed to unlock ~ I need help

12-21-2010, 21:01	#255 (permalink)
Boshko_Alfa No Life Poster Join Date: Mar 2007 Location: Skopje, Macedonia Age: 36 Posts: 4,244 Member: 472933 Status: Offline Sonork: 100.1590967 Thanks Meter: 1,331	Phone still ask for NCK code or u don't have network? btw this is not thread for that question.