Post here successfully operations via NCK BOX / Dongle PREMIUM v2 - Page 345 - GSM-Forum

4mula · 02-08-2017, 21:43

Lenovo A319 STUCK ON LOGO

Flash files count is :12
Action : Firmware update.
Selected Model: 0-By CPU: MT6572_EMMC
Exe version: NCKBox AndroidMTK 1.8.7.6
Scenario: [0]Safe Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM85)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) HYNIX 0x483447326111
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 90014A48344732 : 000000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9c00000 [3.652 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM Port (COM145)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Preloader saved in firmware directory.
Starting flash.
Download firmware to flash now...
Wait untill phone will start charging.
All done.

Thanks to NCK Team

fokal2008 · 02-09-2017, 13:57

HTC DESIRE 630 CLONE FLASHING DONE

Code:

 Action : Boot Info.
 Selected 0-By CPU:MT6572_EMMC
 Exe version: NCKBox AndroidMTK 1.8.7.6
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM148)
 Boot mode: Preloader
 Phone detected...Please wait
 Sending DA agent, please wait...
 BaseBand CPU :MT6572_S00
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
----------------------------------------------------
 EMMC: (29Gb+4096Mb) TOSIBA 0x303034473930 
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: 11010030303447 : 000000000000000000
 EMMC UA SIZE: 0xec000000      
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xec480000       [3.692 GB]
 Preloader SEC version: 2
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detecting high speed port, wait......
 Detected : MediaTek DA USB VCOM (Android) (COM147)
 Build ID: KOT49H
 Display ID: ALPS.KK1.MP6.V1
 Version: 4.4.2
 Build Date: Wed Oct 19 12:37:31 CST 2016
 Build Date: 1476851851
 Model: G3
 Brand: alps
 Device: rtech72_we_72_kk
 Manufacturer: alps
 Region: US
 Mediatek Version Release: ALPS.KK1.MP6.V1
 [0]Warning, nvram posible damaged!!.
 Wait untill phone will start charging.
 All done.


 Flash files count is :12
 Action : Firmware update.
 Selected Model: 0-By CPU: MT6572_EMMC
 Exe version: NCKBox AndroidMTK 1.8.7.6
 Scenario: [1]Full Flash
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek USB Port (COM163)
 Boot mode: Brom
 Phone detected...Please wait
 Sending DA agent, please wait...
 BaseBand CPU :MT6572_S00
 BaseBand CPU Secure Version : 05
 BaseBand CPU Bootloader Version : 00
----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
----------------------------------------------------
 EMMC: (29Gb+4096Mb) TOSIBA 0x303034473930 
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: 11010030303447 : 000000000000000000
 EMMC UA SIZE: 0xec000000      
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xec480000       [3.692 GB]
 Preloader SEC version: 2
 Status: USB_FULL_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detecting high speed port, wait......
 Detected : MediaTek DA USB VCOM (Android) (COM147)
 Flash EMMC Algo Start.
 Preloader backup already exist, skip saving.
 Starting flash.
 FORMAT EMMC FLASH :  BEGIN: 0x39f40000       - LEN: 0xe200000       
 FORMAT EMMC FLASH :  BEGIN: 0x48140000       - LEN: 0xa2e40000      
 Send preloader...
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

Gitu4me · 02-09-2017, 14:16

HUAWEI Y3II LUA-U22 FRP DONE

Detected : PreLoader USB VCOM Port (COM9)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6582_S01
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x464e31324d42
EMMC FW VERSION: 06:00:00:00:00:00:00:00
EMMC CID: 150100464E3132 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Preloader SEC version: 2
Checking data, wait...

Erasing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.

THANK YOU SO MUCH NCK TEAM THIS IS NO. 1 BOX FOR MOBILE SOLUTION

gunit1 · 02-09-2017, 16:51

unlock OT 5045x rise ORANGE done

Selected connection metod: FLASH Mode
Exe version: NCKDongle AndroidMTK 2.5.7.4
Selected model: OT-5045X
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : Miracle PreLoader USB VCOM (Android) (COM11)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6735M_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) MICRON 0x50314a39354b
EMMC FW VERSION: 12:00:00:00:00:00:00:00
EMMC CID: FE014E50314A39 : 000000000000000000
EMMC UA SIZE: 0x1d3000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d3600000 [7.303 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : Miracle DA USB VCOM (Android) (COM19)
OTP IMEI: 356627071887012
MODEL FROM PROINFO: 5045X-2ARGWC3
SECRO FROM PROINFO: X7E0X103BP10
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:0) Code : 4568057796769645
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Unlocking target...please wait.
Unlock finished.
Wait untill phone will start charging.
All done.

indergsm · 02-10-2017, 10:36

ZTE BLADE G LUX UNLOCK DONE

BR,
INDER

indergsm · 02-10-2017, 10:41

SONY XPERIA RAY UNLOCK DONE

BR,
INDER

servicegsmarges · 02-10-2017, 10:49

Code:

PHONE: OT-5042X
Exe Version: NckDongle Qualcomm Module 0.1
Port: Android HS-USB Diagnostics AF08 (COM423)
Build id: MPSS.DPM.1.0.c7.9-00004-M8916EAAAANVZM-1
Compile Date: Nov 24 2014
Compile time: 13:26:28
Release date: Sep 21 2014
Release time: 23:00:00
IMEI: 8652xxxxxxxxxxx
Reading, wait.
Backup saved to: C:\Users\Ionut\Documents\NckDongle\backup\alcatel_android\OT-5042X_865289022366762_simlock_backup_2.bin
 
Simlock Status:
SIMLOCK[0] Locked: Counter[7]
SIMLOCK[1] Unlocked
SIMLOCK[2] Unlocked
SIMLOCK[3] Unlocked
SIMLOCK[4] Unlocked
Start direct unlock, wait....
Direct unlock done.
Please restart phone.

Working good and fast, with new module

fokal2008 · 02-10-2017, 16:22

ALCATEL OT4031D RESET PIN LOCK DONE

Code:

 Exe version: NCKBox AndroidMTK 1.8.7.6
 Selected model: MT6572_EMMC
 Action: Reset Pattern
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM148)
 Boot mode: Preloader
 Phone detected...Please wait
 Sending DA agent, please wait...
 BaseBand CPU :MT6572_S00
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
----------------------------------------------------
 EMMC: (29Gb+4096Mb) SANDISK 0x53454d303447 
 EMMC FW VERSION: 3a:00:00:00:00:00:00:00
 EMMC CID: 45010053454D30 : 000000000000000000
 EMMC UA SIZE: 0xec000000      
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xec600000       [3.693 GB]
 Preloader SEC version: 2
 eh_magic: f30a eh_entries: 1 size: 1000
 eh_magic: f30a eh_entries: 1 size: 1000
 Pattern entry deleted.
 If phone ask for pattern, use any pattern.
 Password entry deleted.
 On some phones lock can remain after reset
 If lock remain, perform 2 times reset without power on phone.
 Wait untill phone will start charging.
 All done.

gunit1 · 02-10-2017, 18:11

unlock WIKO LENNY 2 done

Code:

Selected connection metod: META Mode
 Exe version: NCKDongle AndroidMTK 2.5.7.4
 Selected model: MT6580
 Action: Unlock
 Scanning for presents meta ports...
 Meta ports not detected, starting brom stage.
 Curent Platform: MT6580
 Phone must be off with battery inside. 
 Please insert USB cable now...
 [7]Detected: MediaTek PreLoader USB VCOM (Android) (COM7) 
 \\?\usb#vid_0e8d&pid_2000#6&61bf49f&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 
 Starting META mode, wait...
 Restarting to meta,wait....
 If drivers missing, please install CDC drivers.
 This can take up to 5 min on slow phones.
 If take too long, check device manager for drivers.
 [87]META Port Detected: MediaTek USB VCOM (Android) (COM87) 
 USB\VID_0E8D&PID_2007\6&61BF49F&0&1 
 Start sync target, waiting responce.....
 [AP]BaseBand CPU : mt6580,S01
 [META]BaseBand CPU : MT6580B, E00
 [META]SW_VER : MOLY.WR8.W1449.MD.WG.MP.V6.P12
 [META]HW_VER : TINNO6580_WE_L_HSPA_HW
 Phone imei[1] : 358926074692389
 Phone imei[2] : 358926074999982
 Start direct unlock[SIM1]
 Direct unlock done
 Start direct unlock[SIM2]
 Direct unlock done
 Clean Boot flag ok. 
 All done.

efqan.memmedov · 02-10-2017, 19:02

HUAWEI GR3 direct unlock done in few seconds

Selected connection metod: META Mode
Exe version: NCKDongle AndroidMTK 2.5.7.4
Selected model: MT6735
Action: Unlock
Scanning for presents meta ports...
Meta ports not detected, starting brom stage.
Curent Platform: MT6735
Phone must be off with battery inside.
Please insert USB cable now...
[14]Detected: PreLoader USB VCOM Port (COM14)
\\?\usb#vid_0e8d&pid_2000#5&1f0ae993&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[19]META Port Detected: Gadget CDC VCOM Driver (COM19)
USB\VID_0E8D&PID_2007\5&1F0AE993&0&4
Start sync target, waiting responce.....
[AP]BaseBand CPU : mt6753,S01
[AP]APP_VER: TAG-L21C607B102a
Making target channel configuration, wait...
Making tunnel configuration, wait...
Rebooting to meta, wait....
[META]BaseBand CPU : MT6753, E00
[META]SW_VER : MOLY.LR9.W1444.MD.LWTG.MP.V35.P56
[META]HW_VER : HQ6753_65C_B2B_L1_HW
Phone imei[1] : 86166603xxxxxxx
Phone imei[2] : 86166603xxxxxxx
Start direct unlock[SIM1]
Direct unlock done
Direct unlock done
Start direct unlock[SIM2]
Direct unlock done
Direct unlock done
Clean Boot flag ok.
All done.

fokal2008 · 02-11-2017, 11:19

LG G4 MT6572 CLONE FLASHING DONE

Code:

Action : Boot Info.
 Selected 0-By CPU:MT6572_EMMC
 Exe version: NCKBox AndroidMTK 1.8.7.6
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM148)
 Boot mode: Preloader
 Phone detected...Please wait
 Sending DA agent, please wait...
 BaseBand CPU :MT6572_S00
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
----------------------------------------------------
 EMMC: (29Gb+4096Mb) HYNIX 0x483447326111 
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 90014A48344732 : 000000000000000000
 EMMC UA SIZE: 0xe9000000      
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9c00000       [3.652 GB]
 Preloader SEC version: 2
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detecting high speed port, wait......
 Detected : MediaTek DA USB VCOM (Android) (COM147)
 Build ID: KOT49H
 Display ID: ALPS.KK1.MP7.V1.7
 Version: 4.4.2
 Model: G4
 Brand: G4
 Device: G4
 Build Date: Fri Dec 11 19:57:12 CST 2015
 Build Date: 1449835032
 Manufacturer: G4
 Region: US
 Mediatek Version Release: ALPS.KK1.MP7.V1.7
 IMEI[1]: 358564512148324
 IMEI[2]: 358564512148324
 Wait untill phone will start charging.

 All done.

Code:

 Flash files count is :13
 Action : Firmware update.
 Selected Model: 0-By CPU: MT6572_EMMC
 Exe version: NCKBox AndroidMTK 1.8.7.6
 Scenario: [0]Safe Flash
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM148)
 Boot mode: Preloader
 Phone detected...Please wait
 Sending DA agent, please wait...
 BaseBand CPU :MT6572_S00
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
----------------------------------------------------
 EMMC: (29Gb+4096Mb) HYNIX 0x483447326111 
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 90014A48344732 : 000000000000000000
 EMMC UA SIZE: 0xe9000000      
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9c00000       [3.652 GB]
 Preloader SEC version: 2
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detecting high speed port, wait......
 Detected : MediaTek DA USB VCOM (Android) (COM147)
 Warning, flashing preloader disabled! 
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader saved in firmware directory.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

icecube1982 · 02-11-2017, 15:38

SM-J120F succesfully unlock my NCK BOX

Quote:

Port: SAMSUNG Mobile USB Modem #3(COM33)
Phone Detected.
SM-J120F
Model: SM-J120F
Base: SM-N900
Version: J120FXXU1APF4/J120FOJV1APF4/J120FXXU1APF4/J120FXXU1APF4
PRD: SM-J120FZDDKSA
SN: R58H13E81SA
IMEI: 355323071047002
Simlock: Locked
Unlocking, wait....
Job done, please restart phone.

onz · 02-13-2017, 09:27

icecube1982 · 02-13-2017, 10:19

Samsung GT-N7105

Root first before you unlock

Quote:

(ADB)Model Selected : GT-N7105
Detecting phone, wait....
LCD must be on.
If phone ask for SU, please allow.
If phone ask for auth please confirm.
MODEL : GT-N7105
BOARD ID : smdk4x12
PLATFORM ID : exynos4
OS VERSION : 4.1.2
BUILD ID : JZO54K
BUILD DATE : WedMar27110907KST2013
BUILD VERSION : JZO54K.N7105XXDMC3
SOFTWARE VERSION : N7105XXDMC3
Phone Subscriber Info:
Phone Type = GSM
Device ID = 0

(GSM)RIL VERSION : QualcommRIL1.0
(GSM)BASEBAND : N7105DXDMC1
(RIL)SERIAL NUMBER : 30303030303030303030
(RIL)SW VERSION : N7105DXDMC1
Checking SU: True
Checking Root access: True
IMEI:
- Making Backup..
Unlocking please Wait.
Sending Data..
- Rebooting phone.. please wait...
Waiting For Phone To Restart...
This can take up to 2 min on some phones...
If phone ask for AUTH after reboot, please accept.
IF THIS TAKE LONG Then Reconnect Phone Cable...
Unlock Done, Restarting Phone!
Wait untill phone will restart fully.
Total Time: 00:01:44
--------------------------

gunit1 · 02-13-2017, 20:59

CELKON Q5K TRANSFORMER format to remove patern code done !

Waiting for more data: 0
Waiting for more data: 0
Waiting for more data: 0
Waiting for more data: 0
Waiting for more data: 0
Waiting for more data: 0
Waiting for more data: 0
IMEI 1: 911452600908504
IMEI 2: 911452600908512
Formating userdata, wait...
Formating cache, wait...
[misc]Format OK.
Total Time: 00:01:00
Done.

02-10-2017, 10:36	#5165 (permalink)
indergsm Freak Poster Join Date: Jul 2012 Location: The Golden State Punjab, India Age: 38 Posts: 421 Member: 1788939 Status: Offline Sonork: 100.1625853 Thanks Meter: 307	Zte v830w unlock done ZTE BLADE G LUX UNLOCK DONE BR, INDER

02-10-2017, 10:41	#5166 (permalink)
indergsm Freak Poster Join Date: Jul 2012 Location: The Golden State Punjab, India Age: 38 Posts: 421 Member: 1788939 Status: Offline Sonork: 100.1625853 Thanks Meter: 307	SONY ST18a UNLOCK DONE SONY XPERIA RAY UNLOCK DONE BR, INDER

02-13-2017, 09:27	#5173 (permalink)
onz No Life Poster Join Date: Aug 2013 Location: Bulawayo zimbabwe Posts: 1,669 Member: 2012334 Status: Offline Sonork: 100.1658100 Thanks Meter: 777	alcatel pixi 4 frp reset done

02-08-2017, 21:43	#5161 (permalink)
4mula Freak Poster Join Date: Jan 2014 Location: Zimbabwe Posts: 225 Member: 2100642 Status: Offline Thanks Meter: 46	Lenovo A319 STUCK ON LOGO Flash files count is :12 Action : Firmware update. Selected Model: 0-By CPU: MT6572_EMMC Exe version: NCKBox AndroidMTK 1.8.7.6 Scenario: [0]Safe Flash Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek PreLoader USB VCOM Port (COM85) Boot mode: Preloader Phone detected...Please wait Sending DA agent, please wait... BaseBand CPU :MT6572_S00 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 512 MB DRAM ---------------------------------------------------- EMMC: (29Gb+4096Mb) HYNIX 0x483447326111 EMMC FW VERSION: 01:00:00:00:00:00:00:00 EMMC CID: 90014A48344732 : 000000000000000000 EMMC UA SIZE: 0xe9000000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0xe9c00000 [3.652 GB] Preloader SEC version: 2 Status: USB_HIGH_SPEED Detecting high speed port, wait...... If driver not installed, install high speed port driver. If not need high speed port, disable it. After repeat opperation. Detecting high speed port, wait...... Detected : MediaTek DA USB VCOM Port (COM145) Warning, flashing preloader disabled! If you change android version, preloader must be flashed. Flash EMMC Algo Start. Preloader saved in firmware directory. Starting flash. Download firmware to flash now... Wait untill phone will start charging. All done. Thanks to NCK Team

02-09-2017, 14:16	#5163 (permalink)
Gitu4me Junior Member Join Date: Dec 2012 Posts: 7 Member: 1857836 Status: Offline Sonork: Mabula Thanks Meter: 1	HUAWEI Y3II LUA-U22 FRP DONE Detected : PreLoader USB VCOM Port (COM9) Boot mode: Preloader Phone detected...Please wait Sending DA agent, please wait... BaseBand CPU :MT6582_S01 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 1 GB DRAM ---------------------------------------------------- EMMC: (58Gb+8192Mb) SAMSUNG 0x464e31324d42 EMMC FW VERSION: 06:00:00:00:00:00:00:00 EMMC CID: 150100464E3132 : 000000000000000000 EMMC UA SIZE: 0x1d2000000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x1d2880000 [7.290 GB] Preloader SEC version: 2 Checking data, wait... Erasing FRP, wait... FRP Reset Done. Wait untill phone will start charging. All done. THANK YOU SO MUCH NCK TEAM THIS IS NO. 1 BOX FOR MOBILE SOLUTION

02-09-2017, 16:51	#5164 (permalink)
gunit1 No Life Poster Join Date: Oct 2013 Location: Cote Ivoire ABJ,tvlle, LBJ.23 Age: 39 Posts: 1,647 Member: 2041210 Status: Offline Thanks Meter: 541	unlock OT 5045x rise ORANGE done Selected connection metod: FLASH Mode Exe version: NCKDongle AndroidMTK 2.5.7.4 Selected model: OT-5045X Action: Unlock Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : Miracle PreLoader USB VCOM (Android) (COM11) Boot mode: Preloader Phone detected...Please wait Sending DA agent, please wait... BaseBand CPU :MT6735M_S00 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 1 GB DRAM ---------------------------------------------------- EMMC: (58Gb+8192Mb) MICRON 0x50314a39354b EMMC FW VERSION: 12:00:00:00:00:00:00:00 EMMC CID: FE014E50314A39 : 000000000000000000 EMMC UA SIZE: 0x1d3000000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x1d3600000 [7.303 GB] Preloader SEC version: 2 Status: USB_HIGH_SPEED Detecting high speed port, wait...... If driver not installed, install high speed port driver. If not need high speed port, disable it. After repeat opperation. Detecting high speed port, wait...... Detected : Miracle DA USB VCOM (Android) (COM19) OTP IMEI: 356627071887012 MODEL FROM PROINFO: 5045X-2ARGWC3 SECRO FROM PROINFO: X7E0X103BP10 Reading security, wait... SIM[1]: Block1(N): Locked (remain:0) Code : 4568057796769645 Block2(NS): Unlocked Block3(SP): Unlocked Block4(C): Unlocked Unlocking target...please wait. Unlock finished. Wait untill phone will start charging. All done.

02-10-2017, 19:02	#5170 (permalink)
efqan.memmedov Junior Member Join Date: Jan 2015 Location: Azerbaijan Posts: 33 Member: 2328256 Status: Offline Thanks Meter: 9	HUAWEI GR3 direct unlock done in few seconds Selected connection metod: META Mode Exe version: NCKDongle AndroidMTK 2.5.7.4 Selected model: MT6735 Action: Unlock Scanning for presents meta ports... Meta ports not detected, starting brom stage. Curent Platform: MT6735 Phone must be off with battery inside. Please insert USB cable now... [14]Detected: PreLoader USB VCOM Port (COM14) \\?\usb#vid_0e8d&pid_2000#5&1f0ae993&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed} Starting META mode, wait... Restarting to meta,wait.... If drivers missing, please install CDC drivers. This can take up to 5 min on slow phones. If take too long, check device manager for drivers. [19]META Port Detected: Gadget CDC VCOM Driver (COM19) USB\VID_0E8D&PID_2007\5&1F0AE993&0&4 Start sync target, waiting responce..... [AP]BaseBand CPU : mt6753,S01 [AP]APP_VER: TAG-L21C607B102a Making target channel configuration, wait... Making tunnel configuration, wait... Rebooting to meta, wait.... [META]BaseBand CPU : MT6753, E00 [META]SW_VER : MOLY.LR9.W1444.MD.LWTG.MP.V35.P56 [META]HW_VER : HQ6753_65C_B2B_L1_HW Phone imei[1] : 86166603xxxxxxx Phone imei[2] : 86166603xxxxxxx Start direct unlock[SIM1] Direct unlock done Direct unlock done Start direct unlock[SIM2] Direct unlock done Direct unlock done Clean Boot flag ok. All done.

02-13-2017, 20:59	#5175 (permalink)
gunit1 No Life Poster Join Date: Oct 2013 Location: Cote Ivoire ABJ,tvlle, LBJ.23 Age: 39 Posts: 1,647 Member: 2041210 Status: Offline Thanks Meter: 541	CELKON Q5K TRANSFORMER format to remove patern code done ! Waiting for more data: 0 Waiting for more data: 0 Waiting for more data: 0 Waiting for more data: 0 Waiting for more data: 0 Waiting for more data: 0 Waiting for more data: 0 IMEI 1: 911452600908504 IMEI 2: 911452600908512 Formating userdata, wait... Formating cache, wait... [misc]Format OK. Total Time: 00:01:00 Done.