Post here success stories with Octoplus Huawei Tool - Page 10 - GSM-Forum

.::Gsm-Play::. · 04-18-2019, 17:26

Dzomega · 04-19-2019, 05:09

2019-04-19 04:06:34 GMT -------------------------------------------------
Starting Auto detect

Detected ‪HiSilicon Android Device‬ at ‪COM71‬
Warning: Can't get device model.
Warning: Can't get IMEI/MAC info.
Removing security protection...
Connecting to server...
Authorization is successful
Reading basic data...
Reading secure data...
Warning: Can't get phone MEID.

Device Model: ‪NXT-AL10‬
Firmware: ‪NRD90M test-keys‬
Boot: ‪Chipset-austin 5.0.0.3(0FD8)_BOOT‬
Fastboot: ‪Chipset-austin 5.0.0.3(0FD8)_FASTBOOT‬
System: ‪System 5.0.0.57(15MX)‬
Recovery: ‪(unknow)‬
IMEI A: ‪869906024******
IMEI B: ‪869231026*****
Bluetooth MAC: ‪74:A5:28:3******
WiFi MAC: ‪74:A5:28:38***
S/N: ‪CJL5T15C12*****
Board S/N: ‪5T3MGU15****
Vendor Code: ‪all‬
Country Code: ‪cn‬

Auto detect done.
Performed by ‪1.0.9‬ Software version.

2019-04-19 04:07:01 GMT -------------------------------------------------
Starting Reset Huawei ID
Resetting your device

Reset Huawei ID done.
Performed by ‪1.0.9‬ Software version.

djmurod86 · 04-22-2019, 14:06

Detecting Chip Version...
HW Chip : MT6580
HW Version : 8A00.CA00.0000.0000
Brom Version: FF
Boot Loader Version: 01
Sending Download Agent...
DA successfully sent
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: 90014A48.38473461.32D43746.EE51B4EF
eMMC Flash: Hynix: H8G4a2
DA ver : 4.2.94
Initializing Memory Flash...
Initialization completed
Sending Loader...
Loader successfully sent
Reading Flash Info...
EMMC rpmb size : 4 Mb
EMMC boot1 size : 4 Mb
EMMC boot2 size : 4 Mb
EMMC gp1 size : 0 Mb
EMMC gp2 size : 0 Mb
EMMC gp3 size : 0 Mb
EMMC gp4 size : 0 Mb
EMMC user area size : 7456 Mb
Internal RAM size : 128 Kb
External RAM size : 1024 Mb
Reading Partition Table
Reading FRP Partition
Writing FRP Partition data

Reset FRP (MTK Loader) done.
Performed by ‪1.0.9‬ Software version.

djmurod86 · 05-04-2019, 11:34

2019-05-04 10:33:17 GMT -------------------------------------------------
Starting Reset FRP (MTK Loader)
Please Power off the phone, Press 'Vol-' and insert USB cable

Detecting Chip Version...
HW Chip : MT6739
HW Version : 8A00.CB00.0002.0000
Brom Version: 5
Boot Loader Version: FE
Sending Authentication Data
Removing security protection...
Connecting to server...
Sending Download Agent...
DA successfully sent
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: brom
Sending BootLoader Info...
Initializing Memory Flash...
Initialization completed
Sending Loader...
Mobile Status: SYNC
Loader successfully sent
Reading Flash Info...
EMMC rpmb size : 4 Mb
EMMC boot1 size : 4 Mb
EMMC boot2 size : 4 Mb
EMMC gp1 size : 0 Mb
EMMC gp2 size : 0 Mb
EMMC gp3 size : 0 Mb
EMMC gp4 size : 0 Mb
EMMC user area size : 14910 Mb
Reading Partition Table
Reading FRP Partition
Writing FRP Partition data

Reset FRP (MTK Loader) done.
Performed by ‪1.0.9‬ Software version.

djmurod86 · 05-06-2019, 08:03

2019-05-06 07:00:18 GMT -------------------------------------------------
Starting Reset FRP (MTK Loader)
Please Power off the phone, Press 'Vol-' and insert USB cable

Detecting Chip Version...
HW Chip : MT6739
HW Version : 8A00.CA00.0000.0000
Brom Version: 5
Boot Loader Version: FE
Sending Authentication Data
Removing security protection...
Connecting to server...
Sending Download Agent...
DA successfully sent
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: brom
Sending BootLoader Info...
Initializing Memory Flash...
Initialization completed
Sending Loader...
Mobile Status: SYNC
Loader successfully sent
Reading Flash Info...
EMMC rpmb size : 4 Mb
EMMC boot1 size : 4 Mb
EMMC boot2 size : 4 Mb
EMMC gp1 size : 0 Mb
EMMC gp2 size : 0 Mb
EMMC gp3 size : 0 Mb
EMMC gp4 size : 0 Mb
EMMC user area size : 14910 Mb
Reading Partition Table
Reading FRP Partition
Writing FRP Partition data

Reset FRP (MTK Loader) done.
Performed by ‪1.0.9‬ Software version.

Dr_Wolodya · 05-13-2019, 15:11

EVA-L09 Unbrick "Huawei USB COM 1.0" successfully done by flashing Board Firmware:

Code:

2019-05-13 13:24:08.535	2019-05-13 13:24:08 GMT -------------------------------------------------
2019-05-13 13:24:08.537	Starting Write Firmware
2019-05-13 13:24:08.556	Connecting to phone..
2019-05-13 13:24:08.564	Phone connect successfully
2019-05-13 13:24:08.566	Writing board firmware files...
2019-05-13 13:24:08.568	Writing bootloaderimage_XLOADER partition..
2019-05-13 13:24:08.921	XLOADER partition has been written successfully
2019-05-13 13:24:08.924	Writing bootloaderimage_FASTBOOT partition..
2019-05-13 13:24:18.916	FASTBOOT partition has been written successfully
2019-05-13 13:24:18.919	
2019-05-13 13:24:18.922	Write Firmware done.
2019-05-13 13:24:18.925	Performed by 1.0.9 Software version.

Fastboot writing firmware:

Code:

2019-05-13 13:27:05.232	2019-05-13 13:27:05 GMT -------------------------------------------------
2019-05-13 13:27:05.248	Starting Write Firmware
2019-05-13 13:27:05.263	Searching connected Fastboot devices...
2019-05-13 13:27:06.295	Total interfaces: 1
2019-05-13 13:27:06.295	Interface 0 : flags: 1, name(78): \\?\usb#vid_18d1&pid_d00d#6&b79e976&0&4#{f72fe0d4-cbcb-407d-8814-9ed673d0dd6b}
2019-05-13 13:27:07.920	Device Model: EVA-L09
2019-05-13 13:27:07.920	System: EVA-L09C432B386 
2019-05-13 13:27:07.935	IMEI A: 862836032622353
2019-05-13 13:27:07.935	IMEI B: 862836032622353
2019-05-13 13:27:07.951	S/N: MWS0216928005221
2019-05-13 13:27:07.951	Selected firmware:C:/1/EVA-L09K_M00A002_Firmware_Korea (the Republic of)_LG Uplus Corp._Android6.0_EMUI4.1_05022CCR/Software/EXE/factory_version/HLEVAL09M00A002/HLEVAL09M00A002_Download.xml
2019-05-13 13:27:08.139	Writing XLOADER partition..
2019-05-13 13:27:08.764	XLOADER partition has been written successfully
2019-05-13 13:27:08.764	Writing PTABLE partition..
2019-05-13 13:27:09.373	PTABLE partition has been written successfully
2019-05-13 13:27:09.373	Writing FASTBOOT partition..
2019-05-13 13:27:10.092	FASTBOOT partition has been written successfully
2019-05-13 13:27:10.092	Writing DTS partition..
2019-05-13 13:27:13.624	DTS partition has been written successfully
2019-05-13 13:27:13.640	Writing FW_LPM3 partition..
2019-05-13 13:27:14.265	FW_LPM3 partition has been written successfully
2019-05-13 13:27:14.265	Writing sensorhub partition..
2019-05-13 13:27:14.890	sensorhub partition has been written successfully
2019-05-13 13:27:14.890	Writing FW_HIFI partition..
2019-05-13 13:27:15.593	FW_HIFI partition has been written successfully
2019-05-13 13:27:15.593	Writing TEEOS partition..
2019-05-13 13:27:16.281	TEEOS partition has been written successfully
2019-05-13 13:27:16.281	Writing RECOVERY partition..
2019-05-13 13:27:18.781	RECOVERY partition has been written successfully
2019-05-13 13:27:18.796	Writing CACHE partition..
2019-05-13 13:27:19.624	CACHE partition has been written successfully
2019-05-13 13:27:19.624	Writing BOOT partition..
2019-05-13 13:27:20.906	BOOT partition has been written successfully
2019-05-13 13:27:20.921	Writing NVME partition..
2019-05-13 13:27:21.546	NVME partition has been written successfully
2019-05-13 13:27:21.546	Writing MODEM partition..
2019-05-13 13:27:24.547	MODEM partition has been written successfully
2019-05-13 13:27:24.547	Writing MODEM_DTB partition..
2019-05-13 13:27:25.343	MODEM_DTB partition has been written successfully
2019-05-13 13:27:25.343	Writing MODEMNVM_UPDATE partition..
2019-05-13 13:27:26.781	MODEMNVM_UPDATE partition has been written successfully
2019-05-13 13:27:26.781	Writing MODEM_DSP partition..
2019-05-13 13:27:27.500	MODEM_DSP partition has been written successfully
2019-05-13 13:27:27.500	Writing MODEM_OM partition..
2019-05-13 13:27:28.265	MODEM_OM partition has been written successfully
2019-05-13 13:27:28.265	Writing MODEM_NV partition..
2019-05-13 13:27:49.361	Writing MODEM_NV partition failed
2019-05-13 13:27:49.361	
2019-05-13 13:27:49.377	Write Firmware failed.
2019-05-13 13:27:49.392	Performed by 1.0.9 Software version.
2019-05-13 13:27:59.750	Selected file: C:/1/EVA-L09K_M00A002_Firmware_Korea (the Republic of)_LG Uplus Corp._Android6.0_EMUI4.1_05022CCR/Software/EXE/factory_version/HLEVAL09M00A002/HLEVAL09M00A002_Download.xml

2019-05-13 13:34:45.401	2019-05-13 13:34:45 GMT -------------------------------------------------
2019-05-13 13:34:45.417	Starting Write Firmware
2019-05-13 13:34:45.464	Searching connected Fastboot devices...
2019-05-13 13:34:46.459	Total interfaces: 1
2019-05-13 13:34:46.459	Interface 0 : flags: 1, name(78): \\?\usb#vid_18d1&pid_d00d#6&b79e976&0&4#{f72fe0d4-cbcb-407d-8814-9ed673d0dd6b}
2019-05-13 13:34:48.084	Device Model: EVA-L09
2019-05-13 13:34:48.084	System: EVA-L09C432B386 
2019-05-13 13:34:48.100	IMEI A: 862836032622353
2019-05-13 13:34:48.115	IMEI B: 862836032622353
2019-05-13 13:34:48.131	S/N: MWS0216928005221
2019-05-13 13:34:48.147	Selected firmware:C:/1/EVA-L09K_M00A002_Firmware_Korea (the Republic of)_LG Uplus Corp._Android6.0_EMUI4.1_05022CCR/Software/EXE/factory_version/HLEVAL09M00A002/HLEVAL09M00A002_Download.xml
2019-05-13 13:34:48.303	Writing 3RDMODEM partition..
2019-05-13 13:34:49.100	3RDMODEM partition has been written successfully
2019-05-13 13:34:49.100	Writing 3RDMODEMNVM partition..
2019-05-13 13:34:49.772	3RDMODEMNVM partition has been written successfully
2019-05-13 13:34:49.772	Writing 3RDMODEMNVMBKP partition..
2019-05-13 13:34:50.444	3RDMODEMNVMBKP partition has been written successfully
2019-05-13 13:34:50.444	Writing USERDATA partition..
2019-05-13 13:35:00.502	USERDATA partition has been written successfully
2019-05-13 13:35:00.517	Writing SYSTEM partition..
2019-05-13 13:36:56.019	SYSTEM partition has been written successfully
2019-05-13 13:36:56.019	Writing SPLASH2 partition..
2019-05-13 13:36:56.709	SPLASH2 partition has been written successfully
2019-05-13 13:36:56.709	Writing FRP partition..
2019-05-13 13:36:57.354	FRP partition has been written successfully
2019-05-13 13:36:57.354	Writing OEMINFO partition..
2019-05-13 13:37:00.900	OEMINFO partition has been written successfully
2019-05-13 13:37:00.915	Writing CUST partition..
2019-05-13 13:37:02.032	CUST partition has been written successfully
2019-05-13 13:37:02.048	Writing SECURETYSTORAGE partition..
2019-05-13 13:37:23.191	Writing SECURETYSTORAGE partition failed
2019-05-13 13:37:23.207	
2019-05-13 13:37:23.222	Write Firmware failed.
2019-05-13 13:37:23.222	Performed by 1.0.9 Software version.

2019-05-13 13:39:06.821	Selected file: C:/1/EVA-L09K_M00A002_Firmware_Korea (the Republic of)_LG Uplus Corp._Android6.0_EMUI4.1_05022CCR/Software/EXE/factory_version/HLEVAL09M00A002/HLEVAL09M00A002_Download.xml
2019-05-13 13:40:54.454	2019-05-13 13:40:54 GMT -------------------------------------------------
2019-05-13 13:40:54.470	Starting Write Firmware
2019-05-13 13:40:54.501	Searching connected Fastboot devices...
2019-05-13 13:40:55.496	Total interfaces: 1
2019-05-13 13:40:55.496	Interface 0 : flags: 1, name(78): \\?\usb#vid_18d1&pid_d00d#6&b79e976&0&4#{f72fe0d4-cbcb-407d-8814-9ed673d0dd6b}
2019-05-13 13:40:55.700	Reading product model failed
2019-05-13 13:40:56.106	Reading serial number failed
2019-05-13 13:41:01.512	oem get-build-number failed
2019-05-13 13:41:01.528	Selected firmware:C:/1/EVA-L09K_M00A002_Firmware_Korea (the Republic of)_LG Uplus Corp._Android6.0_EMUI4.1_05022CCR/Software/EXE/factory_version/HLEVAL09M00A002/HLEVAL09M00A002_Download.xml
2019-05-13 13:41:01.715	Writing EFUSE partition..
2019-05-13 13:41:02.721	EFUSE partition has been written successfully
2019-05-13 13:41:02.738	
2019-05-13 13:41:02.754	Write Firmware done.
2019-05-13 13:41:02.770	Performed by 1.0.9 Software version.

dzcracker · 05-28-2019, 01:03

PRA-LX1 CONVERTED FROM DEMO TO RETAIL MODE

2019-05-27 22:42:59 GMT -------------------------------------------------
Starting Read Info
Reading basic data...
Reading secure data...

Device Model: ‪PRA-L11‬
Firmware: ‪NRD90M test-keys‬
Boot: ‪Dallas-Release_EDCP_BOOT‬
Fastboot: ‪Chipset-dallas 5.0.0.1(01H2)_FASTBOOT‬
System: ‪System 5.0.0.57(032M)‬
Recovery: ‪(unknow)‬
MEID: ‪00000000000000‬
PESN: ‪00000000‬
IMEI A: ‪‪86255..........
Bluetooth MAC: ‪18

2:76:8B:42:81‬
WiFi MAC: ‪18

2:76:8B:3C:41‬
S/N: ‪57UDU17103003079‬
Board S/N: ‪DU4EWG16CN110175‬
Vendor Code: ‪hw‬
Country Code: ‪demo‬

Read Info done.
Performed by ‪1.0.9‬ Software version.

2019-05-27 22:43:19 GMT -------------------------------------------------
Starting Repair Info
New Country Code: ‪eu‬
Reading basic data...
Reading secure data...
Writing public keys...
Identifying security...
Repairing Vendor/Country code...
Resetting your device

Repair Info done.
Performed by ‪1.0.9‬ Software version.

2019-05-27 22:54:23 GMT -------------------------------------------------
Starting Auto detect

Detected ‪HiSilicon Android Device‬ at ‪COM155‬
Removing security protection...
Connecting to server...
Authorization is successful
Reading basic data...
Reading secure data...

Device Model: ‪PRA-L11‬
Firmware: ‪NRD90M test-keys‬
Boot: ‪Dallas-Release_EDCP_BOOT‬
Fastboot: ‪Chipset-dallas 5.0.0.1(01H2)_FASTBOOT‬
System: ‪System 5.0.0.57(032M)‬
Recovery: ‪(unknow)‬
MEID: ‪00000000000000‬
PESN: ‪00000000‬
IMEI A: ‪86255..........‬
Bluetooth MAC: ‪18

2:76:8B:42:81‬
WiFi MAC: ‪18

2:76:8B:3C:41‬
S/N: ‪57UDU17103003079‬
Board S/N: ‪DU4EWG16CN110175‬
Vendor Code: ‪hw‬
Country Code: ‪eu‬

Auto detect done.
Performed by ‪1.0.9‬ Software version.

allumts · 06-09-2019, 11:30

p9 plus (vie-l09) imei repair + frp done with success

Quote:

Welcome to Octoplus Huawei Software v.‪1.1.0‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

2019-06-08 17:38:59 GMT -------------------------------------------------
Starting Auto detect

Detected ‪HiSilicon Android Device‬ at ‪COM8‬
Warning: Can't get device model.
Warning: Can't get IMEI/MAC info.
Removing security protection...
Connecting to server...
Authorization is successful
Reading basic data...
Reading secure data...
Warning: Can't get phone MEID.

Device Model: ‪VIE-L09‬
Firmware: ‪NRD90M test-keys‬
Boot: ‪Chipset-austin 5.0.0.3(0GM9)_BOOT‬
Fastboot: ‪Chipset-austin 5.0.0.3(0GM9)_FASTBOOT‬
System: ‪System 5.0.0.57(1ENJ)‬
Recovery: ‪(unknow)‬
IMEI A: ‪86086xxxxxxxxxxx
Bluetooth MAC: ‪E0:A3:AC6:70:B1‬
WiFi MAC: ‪E0:A3:AC6:6A:B6‬
S/N: ‪N9Q7N16512xxxxxxx‬
Board S/N: ‪7N3SDD16xxxxxxxxx‬
Vendor Code: ‪xxxxxxx
Country Code: ‪it‬

Auto detect done.
Performed by ‪1.1.0‬ Software version.

2019-06-08 17:40:15 GMT -------------------------------------------------
Starting Repair Info
New IMEI A: ‪86086xxxxxxxx
Reading basic data...
Reading secure data...
Warning: Can't get phone MEID.
Writing public keys...
Identifying security...
Repairing IMEI A...
Resetting your device

Repair Info done.
Performed by ‪1.1.0‬ Software version.
__________________________________________________ ____

FRP RESET, (customer forgot of tell me first).

2019-06-08 17:52:49 GMT -------------------------------------------------
2019-06-08 17:52:49.087 Starting Reset FRP (Fastboot Mode)
2019-06-08 17:52:49.091 Searching connected Fastboot devices...
2019-06-08 17:52:49.100 Total interfaces: 1
2019-06-08 17:52:49.100 Interface 0 : flags: 1, name(81): \\?\usb#vid_18d1&pid_d00d#n9q7n16512005688#{f72fe0 d4-cbcb-407d-8814-9ed673d0dd6b}
2019-06-08 17:52:52.018 Device Model: VIE-L09
2019-06-08 17:52:52.021 System: VIE-L09C02B358
2019-06-08 17:52:52.025 IMEI A: 860865xxxxxxxxx
2019-06-08 17:52:52.029 IMEI B: 860865xxxxxxxxx
2019-06-08 17:52:52.033 S/N: N9Q7N1xxxxxxxxxxx
2019-06-08 17:52:52.037 Initializing Reset FRP process...
2019-06-08 17:52:52.735 Connecting to server...
2019-06-08 17:52:53.679 FRP unlock 0
2019-06-08 17:52:53.866 Writing erase FRP data
2019-06-08 17:52:55.499 Writing Reset FRP data...
2019-06-08 17:52:56.219
2019-06-08 17:52:56.223 Reset FRP (Fastboot Mode) done.
2019-06-08 17:52:56.227 Performed by 1.1.0 Software version.

BR
allumts

alir3za70 · 06-09-2019, 15:40

‪ATU-L21‬ repair imei done

Welcome to Octoplus Huawei Software v.‪1.1.0‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

2019-06-09 13:56:17 GMT -------------------------------------------------
Starting Auto detect
Warning: Set modem mode fail

Detected ‪Qualcomm Android Device‬ at ‪COM97‬
Removing security protection...
Connecting to server...
Authorization is successful

Device Model: ‪ATU-L21‬
Boot: ‪Chipset-msm8917 8.0.0.33(02FH)_SBL1‬
System: ‪System 8.0.0.073(00QU)‬
MEID: ‪00000000000000‬
PESN: ‪00000000‬
IMEI A: ‪***************
IMEI B: ‪***************‬
Bluetooth MAC: ‪B4:86:55:13:08:00‬
WiFi MAC: ‪B4:86:55:13:07:FF‬
S/N: ‪DKJ9X18A18G01015‬
Board S/N: ‪78606P4541013015‬
Vendor Code: ‪hw‬
Country Code: ‪cea‬

Auto detect done.
Performed by ‪1.1.0‬ Software version.

2019-06-09 13:56:49 GMT -------------------------------------------------
Starting Repair Info
New IMEI A: ‪***************
New IMEI B: ‪***************‬
Repairing IMEI A...
Repairing IMEI B...
Resetting your device

Repair Info done.
Performed by ‪1.1.0‬ Software version.

Ahmedashik · 06-22-2019, 08:07

Huawei Lua-L21 Frp reset failed

Quote:

Platform: HUAWEI
Selected model: LUA-L21
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM40
Detecting Chip Version...
HW Chip: MT6737: 0335.0000
HW Version: 8A00.CB00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_Octoplus_Huawei_v.1, n.4
Sending Download Agent...
Operation was failed!
Performed by 1.7.4.0 Software version.

But Connect Fastboot Mode Via test mode Success Frp Reset Done By Octoplus Frp Tool

Quote:

Platform: HUAWEI
Selected model: _TEST-MODE
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: LUA-L21
Phone SN: WTM9K17608905052
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.7.4.0 Software version.

termic2013 · 06-28-2019, 04:37

2019-06-27 03:41:54.808 Loading application settings
2019-06-27 03:41:54.808 Refreshing serial ports list
2019-06-27 03:41:54.968 Found COM ports:
2019-06-27 03:41:54.968 1: COM3 USB Serial Port
2019-06-27 03:41:55.048 Welcome to Octoplus Huawei Software v.1.0.9
2019-06-27 03:41:55.048
2019-06-27 03:41:55.048 To enable 'Manufacture' mode dial
2019-06-27 03:41:55.048 - for Qualcomm and Hisilicon based models: *#*#2846579#*#*
2019-06-27 03:41:55.048 ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
2019-06-27 03:41:55.048
2019-06-27 03:41:55.048 To enable 'Fastboot' mode
2019-06-27 03:41:55.048 1. Power off the phone. Remove SD and SIM cards
2019-06-27 03:41:55.048 2. Press 'Vol-' and insert USB cable
2019-06-27 03:41:55.048 3. Wait until phone enters 'Fastboot' mode
2019-06-27 03:41:55.048
2019-06-27 03:41:55.048 To enable 'Upgrade' mode
2019-06-27 03:41:55.048 1. Power off the phone. Remove SD and SIM cards
2019-06-27 03:41:55.048 2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
2019-06-27 03:41:55.048 3. Wait until phone enters 'Upgrade mode'
2019-06-27 03:41:55.168 Init finished
2019-06-27 03:42:06.420 2019-06-27 03:42:06 GMT -------------------------------------------------
2019-06-27 03:42:06.420 Starting Reset FRP (Fastboot Mode)
2019-06-27 03:42:06.450 Searching connected Fastboot devices...
2019-06-27 03:42:07.450 Total interfaces: 1
2019-06-27 03:42:07.450 Interface 0 : flags: 1, name(79): \\?\usb#vid_18d1&pid_d00d#6&1466078b&0&3#{f72fe0d4-cbcb-407d-8814-9ed673d0dd6b}
2019-06-27 03:42:08.850 Device Model: ATU-L31
2019-06-27 03:42:08.860 System: ATU-L31 8.0.0.147(C461)
2019-06-27 03:42:08.860 IMEI A: 864057044777402
2019-06-27 03:42:08.870 S/N: DKJ9X19407W00592
2019-06-27 03:42:08.880 Initializing Reset FRP process...
2019-06-27 03:42:09.250 Connecting to server...
2019-06-27 03:42:10.460 FRP unlock 0
2019-06-27 03:42:10.760 Writing erase FRP data
2019-06-27 03:42:11.560 Flash writing failed
2019-06-27 03:42:11.960 FRP unlock 1
2019-06-27 03:42:12.280 Writing erase FRP data
2019-06-27 03:42:13.081 Flash writing failed
2019-06-27 03:42:13.481 FRP unlock 2
2019-06-27 03:42:14.107 Writing erase FRP data
2019-06-27 03:42:14.910 Flash writing failed
2019-06-27 03:42:15.310 FRP unlock 3
2019-06-27 03:42:15.863 Writing erase FRP data
2019-06-27 03:42:16.663 Writing Reset FRP data...
2019-06-27 03:42:17.063
2019-06-27 03:42:17.063 Reset FRP (Fastboot Mode) done.
2019-06-27 03:42:17.073 Performed by 1.0.9 Software version.

termic2013 · 06-28-2019, 04:51

2019-05-22 04:36:16.182 Loading application settings
2019-05-22 04:36:16.198 Refreshing serial ports list
2019-05-22 04:36:16.369 Found COM ports:
2019-05-22 04:36:16.369 1: COM3 USB Serial Port
2019-05-22 04:36:16.478 Welcome to Octoplus Huawei Software v.1.0.9
2019-05-22 04:36:16.478
2019-05-22 04:36:16.478 To enable 'Manufacture' mode dial
2019-05-22 04:36:16.478 - for Qualcomm and Hisilicon based models: *#*#2846579#*#*
2019-05-22 04:36:16.478 ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
2019-05-22 04:36:16.478
2019-05-22 04:36:16.478 To enable 'Fastboot' mode
2019-05-22 04:36:16.478 1. Power off the phone. Remove SD and SIM cards
2019-05-22 04:36:16.478 2. Press 'Vol-' and insert USB cable
2019-05-22 04:36:16.478 3. Wait until phone enters 'Fastboot' mode
2019-05-22 04:36:16.478
2019-05-22 04:36:16.478 To enable 'Upgrade' mode
2019-05-22 04:36:16.478 1. Power off the phone. Remove SD and SIM cards
2019-05-22 04:36:16.478 2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
2019-05-22 04:36:16.478 3. Wait until phone enters 'Upgrade mode'
2019-05-22 04:36:16.588 Init finished
2019-05-22 04:36:23.888 2019-05-22 04:36:23 GMT -------------------------------------------------
2019-05-22 04:36:23.888 Starting Reset FRP (Fastboot Mode)
2019-05-22 04:36:23.920 Searching connected Fastboot devices...
2019-05-22 04:36:24.918 Total interfaces: 1
2019-05-22 04:36:24.918 Interface 0 : flags: 1, name(79): \\?\usb#vid_18d1&pid_d00d#6&1466078b&0&1#{f72fe0d4-cbcb-407d-8814-9ed673d0dd6b}
2019-05-22 04:36:26.743 Device Model: WAS-LX2J
2019-05-22 04:36:26.743 System: WAS-LX2JC710B122
2019-05-22 04:36:26.759 MEID: 00000000000000
2019-05-22 04:36:26.759 IMEI A: 864064030712559
2019-05-22 04:36:26.759 IMEI B: 000000000000000
2019-05-22 04:36:26.774 S/N: 9TSDU18323003526
2019-05-22 04:36:26.774 Initializing Reset FRP process...
2019-05-22 04:36:27.149 Connecting to server...
2019-05-22 04:36:28.756 FRP unlock 0
2019-05-22 04:36:29.146 Writing erase FRP data
2019-05-22 04:36:29.988 Writing Reset FRP data...
2019-05-22 04:36:30.191
2019-05-22 04:36:30.191 Reset FRP (Fastboot Mode) done.
2019-05-22 04:36:30.191 Performed by 1.0.9 Software version.

VitaL_co · 07-03-2019, 19:20

Could not unlock Huawei TIT-AL00

Quote:

2019-07-03 16:38:42.838 Performed by 1.1.0 Software version.
2019-07-03 16:38:55.908 2019-07-03 16:38:55 GMT -------------------------------------------------
2019-07-03 16:38:55.984 Starting Read Info
2019-07-03 16:38:56.377 BaseBand chip: MT6735,S01
2019-07-03 16:38:56.455 S/W version: ALPS.L1.MP3.V2_ONTIM6735.66T.L1_P73
2019-07-03 16:38:56.546 H/W board version: S01
2019-07-03 16:38:56.952 BaseBand chip: MT6735, E00
2019-07-03 16:38:57.045 S/W version: MOLY.LR9.W1444.MD.LWTG.MP.V16.P29
2019-07-03 16:38:57.121 H/W board version: ONTIM6735_65C_L1_HW
2019-07-03 16:38:57.197 IMEI A: 86*************
2019-07-03 16:38:57.272 IMEI B: 86*************
2019-07-03 16:38:57.352
2019-07-03 16:38:57.428 Read Info done.
2019-07-03 16:38:57.506 Performed by 1.1.0 Software version.
2019-07-03 16:38:59.113 2019-07-03 16:38:59 GMT -------------------------------------------------
2019-07-03 16:38:59.193 Starting Direct Unlock
2019-07-03 16:38:59.272 Reading sim lock info...
2019-07-03 16:48:11.191 Unable to read sim lock info
2019-07-03 16:48:11.278
2019-07-03 16:48:11.381 Direct Unlock failed.

Dr_Wolodya · 07-09-2019, 15:58

Huawei LUA-U22 Reset FRP successfully done:

Code:

Starting Reset FRP (MTK Loader)
Please Power off the phone and insert USB cable

Detecting Chip Version...
HW Chip : MT6582
HW Version : 8A00.CA01.0001.0000
Brom Version: FF
Boot Loader Version: 01
Sending Download Agent...
DA successfully sent
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: 15010046.4E31324D.4206DD33.EE2793F9
eMMC Flash: Samsung: FN12MB
DA ver : 4.2.87
Initializing Memory Flash...
Initialization completed
Sending Loader...
Loader successfully sent
Reading Flash Info...
EMMC rpmb size : 0 Mb
EMMC boot1 size : 4 Mb
EMMC boot2 size : 4 Mb
EMMC gp1 size : 0 Mb
EMMC gp2 size : 0 Mb
EMMC gp3 size : 0 Mb
EMMC gp4 size : 0 Mb
EMMC user area size : 7456 Mb
Internal RAM size : 128 Kb
External RAM size : 1024 Mb
Reading Partition Table
Reading FRP Partition
Writing FRP Partition data

Reset FRP (MTK Loader) done.
Performed by ‪1.1.0‬ Software version.

kremlinyoki · 07-09-2019, 21:21

can you help me with this.
1 week ago I activated huawei on octoplus box but I can not use.

04-18-2019, 17:26	#136 (permalink)
.::Gsm-Play::. No Life Poster Join Date: Jul 2011 Location: Great India Posts: 1,646 Member: 1615596 Status: Offline Sonork: 100.160704? Thanks Meter: 760	P9 Lite FRP successfully done

04-22-2019, 14:06	#138 (permalink)
djmurod86 No Life Poster Join Date: Feb 2007 Location: Inside Posts: 4,133 Member: 455852 Status: Offline Sonork: 100.1596308 Thanks Meter: 1,993	Huawei CRO-U00 Reset Frp Done Detecting Chip Version... HW Chip : MT6580 HW Version : 8A00.CA00.0000.0000 Brom Version: FF Boot Loader Version: 01 Sending Download Agent... DA successfully sent Synchronizing with DA... NAND Flash: not installed eMMC Flash: 90014A48.38473461.32D43746.EE51B4EF eMMC Flash: Hynix: H8G4a2 DA ver : 4.2.94 Initializing Memory Flash... Initialization completed Sending Loader... Loader successfully sent Reading Flash Info... EMMC rpmb size : 4 Mb EMMC boot1 size : 4 Mb EMMC boot2 size : 4 Mb EMMC gp1 size : 0 Mb EMMC gp2 size : 0 Mb EMMC gp3 size : 0 Mb EMMC gp4 size : 0 Mb EMMC user area size : 7456 Mb Internal RAM size : 128 Kb External RAM size : 1024 Mb Reading Partition Table Reading FRP Partition Writing FRP Partition data Reset FRP (MTK Loader) done. Performed by ‪1.0.9‬ Software version.

05-04-2019, 11:34	#139 (permalink)
djmurod86 No Life Poster Join Date: Feb 2007 Location: Inside Posts: 4,133 Member: 455852 Status: Offline Sonork: 100.1596308 Thanks Meter: 1,993	Huawei DRA-LX2 Reset FRP DONE 2019-05-04 10:33:17 GMT ------------------------------------------------- Starting Reset FRP (MTK Loader) Please Power off the phone, Press 'Vol-' and insert USB cable Detecting Chip Version... HW Chip : MT6739 HW Version : 8A00.CB00.0002.0000 Brom Version: 5 Boot Loader Version: FE Sending Authentication Data Removing security protection... Connecting to server... Sending Download Agent... DA successfully sent Synchronizing with DA... Mobile Status: SYNC Mobile Status: brom Sending BootLoader Info... Initializing Memory Flash... Initialization completed Sending Loader... Mobile Status: SYNC Loader successfully sent Reading Flash Info... EMMC rpmb size : 4 Mb EMMC boot1 size : 4 Mb EMMC boot2 size : 4 Mb EMMC gp1 size : 0 Mb EMMC gp2 size : 0 Mb EMMC gp3 size : 0 Mb EMMC gp4 size : 0 Mb EMMC user area size : 14910 Mb Reading Partition Table Reading FRP Partition Writing FRP Partition data Reset FRP (MTK Loader) done. Performed by ‪1.0.9‬ Software version.

05-06-2019, 08:03	#140 (permalink)
djmurod86 No Life Poster Join Date: Feb 2007 Location: Inside Posts: 4,133 Member: 455852 Status: Offline Sonork: 100.1596308 Thanks Meter: 1,993	Dua-l22 reset frp done 2019-05-06 07:00:18 GMT ------------------------------------------------- Starting Reset FRP (MTK Loader) Please Power off the phone, Press 'Vol-' and insert USB cable Detecting Chip Version... HW Chip : MT6739 HW Version : 8A00.CA00.0000.0000 Brom Version: 5 Boot Loader Version: FE Sending Authentication Data Removing security protection... Connecting to server... Sending Download Agent... DA successfully sent Synchronizing with DA... Mobile Status: SYNC Mobile Status: brom Sending BootLoader Info... Initializing Memory Flash... Initialization completed Sending Loader... Mobile Status: SYNC Loader successfully sent Reading Flash Info... EMMC rpmb size : 4 Mb EMMC boot1 size : 4 Mb EMMC boot2 size : 4 Mb EMMC gp1 size : 0 Mb EMMC gp2 size : 0 Mb EMMC gp3 size : 0 Mb EMMC gp4 size : 0 Mb EMMC user area size : 14910 Mb Reading Partition Table Reading FRP Partition Writing FRP Partition data Reset FRP (MTK Loader) done. Performed by ‪1.0.9‬ Software version.

05-28-2019, 01:03	#142 (permalink)
dzcracker Insane Poster Join Date: Nov 2016 Location: algeria Posts: 63 Member: 2651755 Status: Offline Thanks Meter: 15	PRA-LX1 CONVERTED FROM DEMO TO RETAIL MODE 2019-05-27 22:42:59 GMT ------------------------------------------------- Starting Read Info Reading basic data... Reading secure data... Device Model: ‪PRA-L11‬ Firmware: ‪NRD90M test-keys‬ Boot: ‪Dallas-Release_EDCP_BOOT‬ Fastboot: ‪Chipset-dallas 5.0.0.1(01H2)_FASTBOOT‬ System: ‪System 5.0.0.57(032M)‬ Recovery: ‪(unknow)‬ MEID: ‪00000000000000‬ PESN: ‪00000000‬ IMEI A: ‪‪86255.......... Bluetooth MAC: ‪182:76:8B:42:81‬ WiFi MAC: ‪182:76:8B:3C:41‬ S/N: ‪57UDU17103003079‬ Board S/N: ‪DU4EWG16CN110175‬ Vendor Code: ‪hw‬ Country Code: ‪demo‬ Read Info done. Performed by ‪1.0.9‬ Software version. 2019-05-27 22:43:19 GMT ------------------------------------------------- Starting Repair Info New Country Code: ‪eu‬ Reading basic data... Reading secure data... Writing public keys... Identifying security... Repairing Vendor/Country code... Resetting your device Repair Info done. Performed by ‪1.0.9‬ Software version. 2019-05-27 22:54:23 GMT ------------------------------------------------- Starting Auto detect Detected ‪HiSilicon Android Device‬ at ‪COM155‬ Removing security protection... Connecting to server... Authorization is successful Reading basic data... Reading secure data... Device Model: ‪PRA-L11‬ Firmware: ‪NRD90M test-keys‬ Boot: ‪Dallas-Release_EDCP_BOOT‬ Fastboot: ‪Chipset-dallas 5.0.0.1(01H2)_FASTBOOT‬ System: ‪System 5.0.0.57(032M)‬ Recovery: ‪(unknow)‬ MEID: ‪00000000000000‬ PESN: ‪00000000‬ IMEI A: ‪86255..........‬ Bluetooth MAC: ‪182:76:8B:42:81‬ WiFi MAC: ‪182:76:8B:3C:41‬ S/N: ‪57UDU17103003079‬ Board S/N: ‪DU4EWG16CN110175‬ Vendor Code: ‪hw‬ Country Code: ‪eu‬ Auto detect done. Performed by ‪1.0.9‬ Software version.

04-19-2019, 05:09	#137 (permalink)
Dzomega No Life Poster Join Date: Jun 2016 Location: UK Posts: 613 Member: 2581848 Status: Offline Thanks Meter: 249	2019-04-19 04:06:34 GMT ------------------------------------------------- Starting Auto detect Detected ‪HiSilicon Android Device‬ at ‪COM71‬ Warning: Can't get device model. Warning: Can't get IMEI/MAC info. Removing security protection... Connecting to server... Authorization is successful Reading basic data... Reading secure data... Warning: Can't get phone MEID. Device Model: ‪NXT-AL10‬ Firmware: ‪NRD90M test-keys‬ Boot: ‪Chipset-austin 5.0.0.3(0FD8)_BOOT‬ Fastboot: ‪Chipset-austin 5.0.0.3(0FD8)_FASTBOOT‬ System: ‪System 5.0.0.57(15MX)‬ Recovery: ‪(unknow)‬ IMEI A: ‪869906024**** IMEI B: ‪869231026* Bluetooth MAC: ‪74:A5:28:3** WiFi MAC: ‪74:A5:28:38* S/N: ‪CJL5T15C12*** Board S/N: ‪5T3MGU15** Vendor Code: ‪all‬ Country Code: ‪cn‬ Auto detect done. Performed by ‪1.0.9‬ Software version. 2019-04-19 04:07:01 GMT ------------------------------------------------- Starting Reset Huawei ID Resetting your device Reset Huawei ID done. Performed by ‪1.0.9‬ Software version.

06-09-2019, 15:40	#144 (permalink)
alir3za70 Freak Poster Join Date: Aug 2018 Location: bandarabbas Posts: 154 Member: 2859531 Status: Offline Thanks Meter: 73	‪ATU-L21‬ repair imei done Welcome to Octoplus Huawei Software v.‪1.1.0‬ To enable 'Manufacture' mode dial - for Qualcomm and Hisilicon based models: ##2846579## ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode - for MTK based models: ##14789632## ProjectMenu > Background Settings > USB Port Settings > Debug Mode To enable 'Fastboot' mode 1. Power off the phone. Remove SD and SIM cards 2. Press 'Vol-' and insert USB cable 3. Wait until phone enters 'Fastboot' mode To enable 'Upgrade' mode 1. Power off the phone. Remove SD and SIM cards 2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable 3. Wait until phone enters 'Upgrade mode' 2019-06-09 13:56:17 GMT ------------------------------------------------- Starting Auto detect Warning: Set modem mode fail Detected ‪Qualcomm Android Device‬ at ‪COM97‬ Removing security protection... Connecting to server... Authorization is successful Device Model: ‪ATU-L21‬ Boot: ‪Chipset-msm8917 8.0.0.33(02FH)_SBL1‬ System: ‪System 8.0.0.073(00QU)‬ MEID: ‪00000000000000‬ PESN: ‪00000000‬ IMEI A: ‪************* IMEI B: ‪***********‬ Bluetooth MAC: ‪B4:86:55:13:08:00‬ WiFi MAC: ‪B4:86:55:13:07:FF‬ S/N: ‪DKJ9X18A18G01015‬ Board S/N: ‪78606P4541013015‬ Vendor Code: ‪hw‬ Country Code: ‪cea‬ Auto detect done. Performed by ‪1.1.0‬ Software version. 2019-06-09 13:56:49 GMT ------------------------------------------------- Starting Repair Info New IMEI A: ‪*********** New IMEI B: ‪*************‬ Repairing IMEI A... Repairing IMEI B... Resetting your device Repair Info done. Performed by ‪1.1.0‬ Software version.

06-28-2019, 04:37	#146 (permalink)
termic2013 Junior Member Join Date: Oct 2012 Posts: 17 Member: 1823299 Status: Offline Sonork: termic Thanks Meter: 2	2019-06-27 03:41:54.808 Loading application settings 2019-06-27 03:41:54.808 Refreshing serial ports list 2019-06-27 03:41:54.968 Found COM ports: 2019-06-27 03:41:54.968 1: COM3 USB Serial Port 2019-06-27 03:41:55.048 Welcome to Octoplus Huawei Software v.1.0.9 2019-06-27 03:41:55.048 2019-06-27 03:41:55.048 To enable 'Manufacture' mode dial 2019-06-27 03:41:55.048 - for Qualcomm and Hisilicon based models: ##2846579## 2019-06-27 03:41:55.048 ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode 2019-06-27 03:41:55.048 2019-06-27 03:41:55.048 To enable 'Fastboot' mode 2019-06-27 03:41:55.048 1. Power off the phone. Remove SD and SIM cards 2019-06-27 03:41:55.048 2. Press 'Vol-' and insert USB cable 2019-06-27 03:41:55.048 3. Wait until phone enters 'Fastboot' mode 2019-06-27 03:41:55.048 2019-06-27 03:41:55.048 To enable 'Upgrade' mode 2019-06-27 03:41:55.048 1. Power off the phone. Remove SD and SIM cards 2019-06-27 03:41:55.048 2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable 2019-06-27 03:41:55.048 3. Wait until phone enters 'Upgrade mode' 2019-06-27 03:41:55.168 Init finished 2019-06-27 03:42:06.420 2019-06-27 03:42:06 GMT ------------------------------------------------- 2019-06-27 03:42:06.420 Starting Reset FRP (Fastboot Mode) 2019-06-27 03:42:06.450 Searching connected Fastboot devices... 2019-06-27 03:42:07.450 Total interfaces: 1 2019-06-27 03:42:07.450 Interface 0 : flags: 1, name(79): \\?\usb#vid_18d1&pid_d00d#6&1466078b&0&3#{f72fe0d4-cbcb-407d-8814-9ed673d0dd6b} 2019-06-27 03:42:08.850 Device Model: ATU-L31 2019-06-27 03:42:08.860 System: ATU-L31 8.0.0.147(C461) 2019-06-27 03:42:08.860 IMEI A: 864057044777402 2019-06-27 03:42:08.870 S/N: DKJ9X19407W00592 2019-06-27 03:42:08.880 Initializing Reset FRP process... 2019-06-27 03:42:09.250 Connecting to server... 2019-06-27 03:42:10.460 FRP unlock 0 2019-06-27 03:42:10.760 Writing erase FRP data 2019-06-27 03:42:11.560 Flash writing failed 2019-06-27 03:42:11.960 FRP unlock 1 2019-06-27 03:42:12.280 Writing erase FRP data 2019-06-27 03:42:13.081 Flash writing failed 2019-06-27 03:42:13.481 FRP unlock 2 2019-06-27 03:42:14.107 Writing erase FRP data 2019-06-27 03:42:14.910 Flash writing failed 2019-06-27 03:42:15.310 FRP unlock 3 2019-06-27 03:42:15.863 Writing erase FRP data 2019-06-27 03:42:16.663 Writing Reset FRP data... 2019-06-27 03:42:17.063 2019-06-27 03:42:17.063 Reset FRP (Fastboot Mode) done. 2019-06-27 03:42:17.073 Performed by 1.0.9 Software version.

06-28-2019, 04:51	#147 (permalink)
termic2013 Junior Member Join Date: Oct 2012 Posts: 17 Member: 1823299 Status: Offline Sonork: termic Thanks Meter: 2	2019-05-22 04:36:16.182 Loading application settings 2019-05-22 04:36:16.198 Refreshing serial ports list 2019-05-22 04:36:16.369 Found COM ports: 2019-05-22 04:36:16.369 1: COM3 USB Serial Port 2019-05-22 04:36:16.478 Welcome to Octoplus Huawei Software v.1.0.9 2019-05-22 04:36:16.478 2019-05-22 04:36:16.478 To enable 'Manufacture' mode dial 2019-05-22 04:36:16.478 - for Qualcomm and Hisilicon based models: ##2846579## 2019-05-22 04:36:16.478 ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode 2019-05-22 04:36:16.478 2019-05-22 04:36:16.478 To enable 'Fastboot' mode 2019-05-22 04:36:16.478 1. Power off the phone. Remove SD and SIM cards 2019-05-22 04:36:16.478 2. Press 'Vol-' and insert USB cable 2019-05-22 04:36:16.478 3. Wait until phone enters 'Fastboot' mode 2019-05-22 04:36:16.478 2019-05-22 04:36:16.478 To enable 'Upgrade' mode 2019-05-22 04:36:16.478 1. Power off the phone. Remove SD and SIM cards 2019-05-22 04:36:16.478 2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable 2019-05-22 04:36:16.478 3. Wait until phone enters 'Upgrade mode' 2019-05-22 04:36:16.588 Init finished 2019-05-22 04:36:23.888 2019-05-22 04:36:23 GMT ------------------------------------------------- 2019-05-22 04:36:23.888 Starting Reset FRP (Fastboot Mode) 2019-05-22 04:36:23.920 Searching connected Fastboot devices... 2019-05-22 04:36:24.918 Total interfaces: 1 2019-05-22 04:36:24.918 Interface 0 : flags: 1, name(79): \\?\usb#vid_18d1&pid_d00d#6&1466078b&0&1#{f72fe0d4-cbcb-407d-8814-9ed673d0dd6b} 2019-05-22 04:36:26.743 Device Model: WAS-LX2J 2019-05-22 04:36:26.743 System: WAS-LX2JC710B122 2019-05-22 04:36:26.759 MEID: 00000000000000 2019-05-22 04:36:26.759 IMEI A: 864064030712559 2019-05-22 04:36:26.759 IMEI B: 000000000000000 2019-05-22 04:36:26.774 S/N: 9TSDU18323003526 2019-05-22 04:36:26.774 Initializing Reset FRP process... 2019-05-22 04:36:27.149 Connecting to server... 2019-05-22 04:36:28.756 FRP unlock 0 2019-05-22 04:36:29.146 Writing erase FRP data 2019-05-22 04:36:29.988 Writing Reset FRP data... 2019-05-22 04:36:30.191 2019-05-22 04:36:30.191 Reset FRP (Fastboot Mode) done. 2019-05-22 04:36:30.191 Performed by 1.0.9 Software version.

07-09-2019, 21:21	#150 (permalink)
kremlinyoki Junior Member Join Date: Jan 2007 Posts: 18 Member: 436961 Status: Offline Thanks Meter: 1	can you help me with this. 1 week ago I activated huawei on octoplus box but I can not use.