DEAD 2100 1st boot error - GSM-Forum

cellco_mann · 12-05-2004, 01:23

I have a 2100 dead.All the voltages r ok but when i try to flash it then it gives 1st boot error.Sometimes it gives 1st boot ok and after that 1st boot error.I have change the flash ic but the problem is still exists.Any one help me pls.Thanks in addvance.

tap10 · 12-06-2004, 16:00

sir try to use another software maybe you have try use knok including 2100 its very powerful when it comes to 2100 phones maybe could help.

gbluez · 12-06-2004, 20:38

use rolis ONLY FOR TROUBLE SHOOTING. Here ie the description:

1.choose 5210
2.Read flash -----> Preloader counter respond error : HAGAR Faults
3.Read flash -----> Not accep preloader : 32 Mhz oscilator faults.
2 & 3 check both possibility, some time you got same mesage for differ. error.
4.Read flash -----> RAM is bad : if you're sure that your flash ic is OK, replace c-cont.
5.Read flash ------> RAM is bad, but Hagar, oscilator, ccont, ic flash is ok: Bad CPU- (MAD IC)

thats all, may help

12-05-2004, 01:23	#1 (permalink)
cellco_mann Freak Poster Join Date: Aug 2004 Location: PUNJAB (INDIA) Age: 47 Posts: 263 Member: 78448 Status: Offline Thanks Meter: 17	DEAD 2100 1st boot error I have a 2100 dead.All the voltages r ok but when i try to flash it then it gives 1st boot error.Sometimes it gives 1st boot ok and after that 1st boot error.I have change the flash ic but the problem is still exists.Any one help me pls.Thanks in addvance.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
E50 1st boot ok 1st boot error	rajtelecom	HWK	0	09-19-2008 12:05
3610 1st Ok.. 1st boot error	ansari_nazeel	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	7	10-22-2006 16:24
3310,2100 1st boot ok.....error	..:MumbaiGsm:..	Nokia Hardware & Hardware Repair	10	10-10-2006 14:20
1st Boot Error on ALL 1100, 6800, 3650	dannyogolo	Twisterflasher	8	08-16-2004 11:42
1st boot error on UFS-3	sloper	UFS2 + UFS3-Tornadoflasher	8	05-05-2004 01:57

12-06-2004, 16:00	#2 (permalink)
tap10 Junior Member Join Date: Aug 2004 Age: 54 Posts: 32 Member: 77055 Status: Offline Thanks Meter: 0	sir try to use another software maybe you have try use knok including 2100 its very powerful when it comes to 2100 phones maybe could help.

12-06-2004, 20:38	#3 (permalink)
gbluez No Life Poster Join Date: Jul 2004 Posts: 11,049 Member: 73565 Status: Offline Thanks Meter: 5,062	use rolis ONLY FOR TROUBLE SHOOTING. Here ie the description: 1.choose 5210 2.Read flash -----> Preloader counter respond error : HAGAR Faults 3.Read flash -----> Not accep preloader : 32 Mhz oscilator faults. 2 & 3 check both possibility, some time you got same mesage for differ. error. 4.Read flash -----> RAM is bad : if you're sure that your flash ic is OK, replace c-cont. 5.Read flash ------> RAM is bad, but Hagar, oscilator, ccont, ic flash is ok: Bad CPU- (MAD IC) thats all, may help