kzf 1.8e does not work with hwk modul pls help. - GSM-Forum

erkan06us · 04-20-2006, 15:42

i bought a hwk modul for my twister box.there s no problem with samsung d500 vs. and lg models.but kzf 1.8e still never work.help me pls.

ribbentrop · 04-20-2006, 19:41

Remove HWK from your box and update firmware with UFS3Tool , then connect HWK and use HWKTools for update ( repair) your HWK .
I think this steps can help you .

hcomp · 04-20-2006, 22:18

To make your UFS

Open UFS_Maintenance
Conect-Boot UFS & Get Info-Update UFx Firmware and put atach "1"
after that push Initialise UFx NVM
close

Open UFS3Tools
Conect- Put to update Firmware and eeprom in V2.5 and push Fix&Updare
Close

Open UFS_DCTx_1.3J
Conect-it ask you yo update push "yes"
conect-
you'll see:

UFxBoot V2.2 (c) SarasSoft 2003. Id: 62 CF 1 7
UFS_USB V2.6 (c) SarasSoft 2005. S/n: xxxxx (xxxxx - is number of your box)
Licence : True
Features: 00000001

after that you'll see mistake -32, you need to push ok
push update firmware and put this file "Reg.fbi", and in C:\Program Files\Nokia\Phenix it was created xxxxx.reg
(xxxxx - is number of your box)

Open UFSTools-FBI Calculator- put file "xxxxx.reg" (xxxxx - is number of your box) you need to save in xxxxx.fbi C:\Program Files\Nokia\Phenix in (xxxxx - is number of your box)

Open UFS_DCTx_1.3J
Conect, you'll see mistake, push ok or yes
push update firmware and push file xxxxx.fbi at C:\Program Files\Nokia\Phenix
you'll see:
UFxBoot V2.2 (c) SarasSoft 2003. Id: 62 CF 1 7
UFS_USB V2.6 (c) SarasSoft 2005. S/n: xxxxx (xxxxx - is number of your box)
Licence : True
Features: 00000001
BOX_KEY Updated
then use HWKtool to active your hwk
goooood luck

hcomp · 04-20-2006, 22:19

http://forum.gsmhosting.com/vbb/showthread.php?t=282535

erkan06us · 04-21-2006, 09:13

i did it with hwk module.but i ll try without hwk n back.ty

erkan06us · 04-21-2006, 09:20

Quote:

Originally Posted by ribbentrop

Remove HWK from your box and update firmware with UFS3Tool , then connect HWK and use HWKTools for update ( repair) your HWK .
I think this steps can help you .

i tried ur method.still same problem!

erkan06us · 04-21-2006, 09:27

Quote:

Originally Posted by hcomp

To make your UFS

Open UFS_Maintenance
Conect-Boot UFS & Get Info-Update UFx Firmware and put atach "1"
after that push Initialise UFx NVM
close

Open UFS3Tools
Conect- Put to update Firmware and eeprom in V2.5 and push Fix&Updare
Close

Open UFS_DCTx_1.3J
Conect-it ask you yo update push "yes"
conect-
you'll see:

UFxBoot V2.2 (c) SarasSoft 2003. Id: 62 CF 1 7
UFS_USB V2.6 (c) SarasSoft 2005. S/n: xxxxx (xxxxx - is number of your box)
Licence : True
Features: 00000001

after that you'll see mistake -32, you need to push ok
push update firmware and put this file "Reg.fbi", and in C:\Program Files\Nokia\Phenix it was created xxxxx.reg
(xxxxx - is number of your box)

Open UFSTools-FBI Calculator- put file "xxxxx.reg" (xxxxx - is number of your box) you need to save in xxxxx.fbi C:\Program Files\Nokia\Phenix in (xxxxx - is number of your box)

Open UFS_DCTx_1.3J
Conect, you'll see mistake, push ok or yes
push update firmware and push file xxxxx.fbi at C:\Program Files\Nokia\Phenix
you'll see:
UFxBoot V2.2 (c) SarasSoft 2003. Id: 62 CF 1 7
UFS_USB V2.6 (c) SarasSoft 2005. S/n: xxxxx (xxxxx - is number of your box)
Licence : True
Features: 00000001
BOX_KEY Updated
then use HWKtool to active your hwk
goooood luck

it was asked a fbi file when i pressed the update ufs firmware button.i ve no file.which file i ll browse?

erkan06us · 04-21-2006, 09:44

i ve dctx 1.3I and i tried with this.and also i didn't see mistake-32 .there was no created a reg.fbi file in c/programfiles/nokia/phoenix.i had to stopped that step.

ribbentrop · 04-21-2006, 16:04

Use UFS3Tool with this options. ( press ''connect , select '' Write firmware'' , ''write eprom'' , ''write 93c46'' then press ''Fix and update '' )
Second step : You must calculate codes for your SN . You can use UFS3Tool also : after calculation press ''write eprom'' ONLY (not '' Write firmware'' ,''write 93c46'' ) and press ''Fix and update '' .
Then use ''HWK Tool'' for repair HWK .
Try this and write here what happened .
You have very strange HWK ... HID with first digit like 00000.... - its for emulator of HWK .

hcomp · 04-21-2006, 18:20

Quote:

Originally Posted by erkan06us

it was asked a fbi file when i pressed the update ufs firmware button.i ve no file.which file i ll browse?

http://forum.gsmhosting.com/vbb/showthread.php?t=282535

erkan06us · 04-28-2006, 11:47

Quote:

Originally Posted by ribbentrop

Use UFS3Tool with this options. ( press ''connect , select '' Write firmware'' , ''write eprom'' , ''write 93c46'' then press ''Fix and update '' )
Second step : You must calculate codes for your SN . You can use UFS3Tool also : after calculation press ''write eprom'' ONLY (not '' Write firmware'' ,''write 93c46'' ) and press ''Fix and update '' .
Then use ''HWK Tool'' for repair HWK .
Try this and write here what happened .
You have very strange HWK ... HID with first digit like 00000.... - its for emulator of HWK .

congratulations...its succesfully done.there s a lot of friends tell me different method.i tried it and i couldnt work kzf 1.8e.but now its working with your method.thanks a lot bro.

ribbentrop · 04-28-2006, 15:41

Always ready to help

lrpa · 05-26-2006, 09:53

Please post this kzf1.8e here

04-21-2006, 09:44	#8 (permalink)
erkan06us Freak Poster Join Date: Aug 2005 Location: turkey Age: 51 Posts: 211 Member: 174769 Status: Offline Thanks Meter: 19	i ve dctx 1.3I and i tried with this.and also i didn't see mistake-32 .there was no created a reg.fbi file in c/programfiles/nokia/phoenix.i had to stopped that step. Last edited by erkan06us; 04-21-2006 at 10:17.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
YesSim does not work with iphone 3G? i tried every version lost signal!!! pls respond	virtue	YESSIM	2	01-01-2009 01:56
Help!!!Search in Macroreader does not work with updating MC60!!!	asdv	E-Gold Based Phones	0	07-03-2005 11:47
N500 works with Airtel( 1800mhz) but does not work with BPL,Orarange( 900 mhz)service	sunil9200	VLSI, Conexant, Skyworks and Old Models	1	03-01-2004 09:32
wulfgang does not work with normal data cable	tecra	Panasonic	2	05-17-2001 11:10

04-20-2006, 19:41	#2 (permalink)
ribbentrop No Life Poster Join Date: Sep 2003 Location: Ukraine Age: 51 Posts: 4,618 Member: 40400 Status: Offline Thanks Meter: 1,250	Remove HWK from your box and update firmware with UFS3Tool , then connect HWK and use HWKTools for update ( repair) your HWK . I think this steps can help you .

04-20-2006, 22:18	#3 (permalink)
hcomp Freak Poster Join Date: Jun 2003 Location: egypt Posts: 383 Member: 31136 Status: Offline Thanks Meter: 97	To make your UFS Open UFS_Maintenance Conect-Boot UFS & Get Info-Update UFx Firmware and put atach "1" after that push Initialise UFx NVM close Open UFS3Tools Conect- Put to update Firmware and eeprom in V2.5 and push Fix&Updare Close Open UFS_DCTx_1.3J Conect-it ask you yo update push "yes" conect- you'll see: UFxBoot V2.2 (c) SarasSoft 2003. Id: 62 CF 1 7 UFS_USB V2.6 (c) SarasSoft 2005. S/n: xxxxx (xxxxx - is number of your box) Licence : True Features: 00000001 after that you'll see mistake -32, you need to push ok push update firmware and put this file "Reg.fbi", and in C:\Program Files\Nokia\Phenix it was created xxxxx.reg (xxxxx - is number of your box) Open UFSTools-FBI Calculator- put file "xxxxx.reg" (xxxxx - is number of your box) you need to save in xxxxx.fbi C:\Program Files\Nokia\Phenix in (xxxxx - is number of your box) Open UFS_DCTx_1.3J Conect, you'll see mistake, push ok or yes push update firmware and push file xxxxx.fbi at C:\Program Files\Nokia\Phenix you'll see: UFxBoot V2.2 (c) SarasSoft 2003. Id: 62 CF 1 7 UFS_USB V2.6 (c) SarasSoft 2005. S/n: xxxxx (xxxxx - is number of your box) Licence : True Features: 00000001 BOX_KEY Updated then use HWKtool to active your hwk goooood luck

04-20-2006, 22:19	#4 (permalink)
hcomp Freak Poster Join Date: Jun 2003 Location: egypt Posts: 383 Member: 31136 Status: Offline Thanks Meter: 97	http://forum.gsmhosting.com/vbb/showthread.php?t=282535

04-21-2006, 09:13	#5 (permalink)
erkan06us Freak Poster Join Date: Aug 2005 Location: turkey Age: 51 Posts: 211 Member: 174769 Status: Offline Thanks Meter: 19	i did it with hwk module.but i ll try without hwk n back.ty

04-21-2006, 16:04	#9 (permalink)
ribbentrop No Life Poster Join Date: Sep 2003 Location: Ukraine Age: 51 Posts: 4,618 Member: 40400 Status: Offline Thanks Meter: 1,250	Use UFS3Tool with this options. ( press ''connect , select '' Write firmware'' , ''write eprom'' , ''write 93c46'' then press ''Fix and update '' ) Second step : You must calculate codes for your SN . You can use UFS3Tool also : after calculation press ''write eprom'' ONLY (not '' Write firmware'' ,''write 93c46'' ) and press ''Fix and update '' . Then use ''HWK Tool'' for repair HWK . Try this and write here what happened . You have very strange HWK ... HID with first digit like 00000.... - its for emulator of HWK .

04-28-2006, 15:41	#12 (permalink)
ribbentrop No Life Poster Join Date: Sep 2003 Location: Ukraine Age: 51 Posts: 4,618 Member: 40400 Status: Offline Thanks Meter: 1,250	Always ready to help

05-26-2006, 09:53	#13 (permalink)
lrpa Freak Poster Join Date: Feb 2005 Age: 49 Posts: 217 Member: 118395 Status: Offline Thanks Meter: 25	Please post this kzf1.8e here