world first Sony Ericsson x10 charging solution - Page 4 - GSM-Forum

SF78 · 04-27-2011, 18:33

I used a multimeter to check all the connections from the USB-connector to the board/chips, and they all seem fine. Should I still do the jumper fix? I have the same problem as everyone else: phone not detected when connecting to a PC and the battery not charging. I don't get the white light in the top corner either. Only red blinking light and battery is down to 1%.

I also noticed the small backup battery on the motherboard had some oxidation/leaking. Anyone know what type of battery (voltage?) that is and could that be the problem? The phone is maybe a year old, could the main battery just suddenly die? I have tried with a different charger that used to work before, (same specs) but it doesn't charge either.

ak786 · 04-28-2011, 09:57

above pic are good just remove the resistance right corner where pink line touch 100% working good man keep it up

kasim · 05-21-2011, 14:14

i dont understand i tried but its not working

MUTUAL · 05-26-2011, 09:59

Quote:

Originally Posted by ak786

above pic are good just remove the resistance right corner where pink line touch 100% working good man keep it up

salam witch resistance u talkin about can u show me pic plz?

gogomit · 05-27-2011, 09:54

I have X10i, the charge connection is ok, but phone only power on when I put the charger in, and don't charge,I made jumper on the IC but the same.Where is the problem

Akhtar Ali Jatt · 05-27-2011, 15:20

Good solution thanks..

rokon · 05-29-2011, 18:35

Valo??????????????????????????????????????

johnda · 05-31-2011, 15:55

Hi.
first thanks to ansari_123. Ok, now I'm in a little problem here... I'm repairing a x10a which was previously repaired using ansari_123's method but its kinf of messy, because I think some soldering is missing... I'm asking a big favor. Please can someone complete the diagram I'm including here??... I can't tell if ansari_123 made a second jumper because I can't see it very well in his picture.
ansari_123's picture (thanks for that):

this is the x10a I have now:

this is an empty diagram I'm including. please can someone complete it please...??:
https://lh5.googleusercontent.com/-g...123_method.jpg
Thanks a lot.
johnda

johnda · 05-31-2011, 16:28

Hi.

I forgot, the x10a can't connect to pc and can't charge as it is now... (I have to charge the battery using a universal battery adapter...)

Thanks
johnda

bunty123 · 06-02-2011, 13:29

thanksssssssssssssssssssssssssssssssssssss

praji · 06-09-2011, 20:08

Quote:

Originally Posted by ansari123

thanks for share
depend me only rehot ic working 1000000000%%%%%

antipesto93 · 06-19-2011, 20:57

bump - I have the same problem, But the soldering is too hard for me, do the lines in the picture mean short the pins out?

I would pay someone 20 pounds to do this!
(uk)

<:SAQI:> · 06-25-2011, 05:50

Good solution thanks..

Big Thank's Ansari to share this solution

<:SAQI:>

<:SAQI:> · 06-25-2011, 05:58

Quote:

Originally Posted by johnda

Hi.
first thanks to ansari_123. Ok, now I'm in a little problem here... I'm repairing a x10a which was previously repaired using ansari_123's method but its kinf of messy, because I think some soldering is missing... I'm asking a big favor. Please can someone complete the diagram I'm including here??... I can't tell if ansari_123 made a second jumper because I can't see it very well in his picture.
ansari_123's picture (thanks for that):

this is the x10a I have now:

this is an empty diagram I'm including. please can someone complete it please...??:
https://lh5.googleusercontent.com/-g...123_method.jpg
Thanks a lot.
johnda

ok i can help you maybe

<:SAQI:> · 06-25-2011, 06:05

Quote:

Originally Posted by <:SAQI:>

ok i can help you maybe

05-21-2011, 14:14	#48 (permalink)
kasim No Life Poster Join Date: Jan 2005 Location: India Posts: 629 Member: 107448 Status: Offline Thanks Meter: 29	i dont understand i dont understand i tried but its not working

05-31-2011, 16:28	#54 (permalink)
johnda Junior Member Join Date: May 2011 Posts: 2 Member: 1587637 Status: Offline Thanks Meter: 0	x10a Hi. I forgot, the x10a can't connect to pc and can't charge as it is now... (I have to charge the battery using a universal battery adapter...) Thanks johnda

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need ericsson 88 cable	migdamas	Old Ericsson Phones & Sony Phones	2	03-24-2017 16:24
Anybody know solution	Robi	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	12-10-2014 12:35
Solution for GSM phones!?!?!?!?	todosije	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	12-16-2010 05:52
NEW ERICSSON A1018 £60 SIEMANS C25 £60 + LOADS MORE	MILLENNIUM-INTERNATIONAL	Main Sales Section	0	08-31-1999 18:54
!!!!!!TO ALL NOKIA 51XX/61XX SP LOCKS 1,2,3,4 SOLUTION latest news!!!!!	spterminator	Main Sales Section	2	08-13-1999 05:55

04-27-2011, 18:33	#46 (permalink)
SF78 Junior Member Join Date: Apr 2011 Posts: 3 Member: 1563932 Status: Offline Thanks Meter: 0	I used a multimeter to check all the connections from the USB-connector to the board/chips, and they all seem fine. Should I still do the jumper fix? I have the same problem as everyone else: phone not detected when connecting to a PC and the battery not charging. I don't get the white light in the top corner either. Only red blinking light and battery is down to 1%. I also noticed the small backup battery on the motherboard had some oxidation/leaking. Anyone know what type of battery (voltage?) that is and could that be the problem? The phone is maybe a year old, could the main battery just suddenly die? I have tried with a different charger that used to work before, (same specs) but it doesn't charge either.

04-28-2011, 09:57	#47 (permalink)
ak786 Freak Poster Join Date: Jun 2008 Posts: 111 Member: 802832 Status: Offline Sonork: ch mobile Thanks Meter: 10	above pic are good just remove the resistance right corner where pink line touch 100% working good man keep it up

05-27-2011, 09:54	#50 (permalink)
gogomit Freak Poster Join Date: Jul 2002 Location: Sofia,Bulgaria Age: 47 Posts: 352 Member: 13917 Status: Offline Thanks Meter: 14	I have X10i, the charge connection is ok, but phone only power on when I put the charger in, and don't charge,I made jumper on the IC but the same.Where is the problem

05-27-2011, 15:20	#51 (permalink)
Akhtar Ali Jatt No Life Poster Join Date: Jan 2009 Location: Sindh Pakistan Posts: 8,877 Member: 953334 Status: Offline Sonork: 100.1614005 Thanks Meter: 15,424	Good solution thanks..

05-29-2011, 18:35	#52 (permalink)
rokon Freak Poster Join Date: Sep 2005 Location: gulistan Age: 55 Posts: 156 Member: 184065 Status: Offline Thanks Meter: 23	Valo??????????????????????????????????????

05-31-2011, 15:55	#53 (permalink)
johnda Junior Member Join Date: May 2011 Posts: 2 Member: 1587637 Status: Offline Thanks Meter: 0	Hi. first thanks to ansari_123. Ok, now I'm in a little problem here... I'm repairing a x10a which was previously repaired using ansari_123's method but its kinf of messy, because I think some soldering is missing... I'm asking a big favor. Please can someone complete the diagram I'm including here??... I can't tell if ansari_123 made a second jumper because I can't see it very well in his picture. ansari_123's picture (thanks for that): this is the x10a I have now: this is an empty diagram I'm including. please can someone complete it please...??: https://lh5.googleusercontent.com/-g...123_method.jpg Thanks a lot. johnda

06-02-2011, 13:29	#55 (permalink)
bunty123 Junior Member Join Date: Feb 2007 Posts: 14 Member: 446488 Status: Offline Thanks Meter: 0	thanksssssssssssssssssssssssssssssssssssss

06-19-2011, 20:57	#57 (permalink)
antipesto93 Junior Member Join Date: Jun 2011 Posts: 1 Member: 1598057 Status: Offline Sonork: adil khokhar Thanks Meter: 0	bump - I have the same problem, But the soldering is too hard for me, do the lines in the picture mean short the pins out? I would pay someone 20 pounds to do this! (uk)

06-25-2011, 05:50	#58 (permalink)
<:SAQI:> Freak Poster Join Date: Jun 2011 Location: Toronto Canada Posts: 292 Member: 1599578 Status: Offline Sonork: 8114214 Thanks Meter: 131	Good solution thanks.. Big Thank's Ansari to share this solution <:SAQI:>