world first Sony Ericsson x10 charging solution - Page 7 - GSM-Forum

bryanmir · 10-28-2011, 12:23

Quote:

Originally Posted by ansari123

yes you need to remove ic and just make one jumper you will good to go

can u explain to me step by step to remove the IC im too scared to do that i dont want to break the board.....please help...

bryanmir · 10-28-2011, 13:16

I have to solder at usb pin or at the board..?

ansari123 · 10-28-2011, 16:07

Quote:

Originally Posted by bryanmir

I have to solder at usb pin or at the board..?

look it hare don't worry
just remove is behind USB and make jumper like that 100% its work
i have done many x10 like this i can share more photos

bryanmir · 10-28-2011, 16:12

Quote:

Originally Posted by ansari123

look it hare don't worry
just remove is behind USB and make jumper like that 100% its work
i have done many x10 like this i can share more photos

1.remove the ic (how to remove it just destroy it or solder and remove)
2.make the jumper.

am I right here..???

bryanmir · 10-28-2011, 18:25

Quote:

Originally Posted by ansari123

yes you need to remove ic and just make one jumper you will good to go

is there any effect to the phone when IC is removed..???

ansari123 · 10-29-2011, 20:34

Quote:

Originally Posted by bryanmir

is there any effect to the phone when IC is removed..???

i removed many time i don't have any problem after remove just jumper like which showed on image done

harinder2519 · 11-02-2011, 08:10

Quote:

Originally Posted by ansari123

u r rock mr ansari .....nice sharing ..thank u ....great job ...u r the FIRST...

missime · 11-03-2011, 00:46

the N3300 ic is extremely heating up after a wrong attempt of heating up the board . if some one could help it would be great

hs2000 · 11-03-2011, 22:33

I can't get the solder to stick!! Driving me crazy.

I'm not sure if I'm doing it right.

Pretty much, the blue line signify the one jumper, solder at each end.

And the pink signifies the other jumper, solder at each end again.

I've tried so many times that I'm afraid I'm melting the chips on the reverse side of the USB.

Starting to look black, can't really see the pins anymore. I put everything back together. The phone seems to be working still but still no charging.

Any help?

Udini · 11-05-2011, 18:56

Hi again

I have a problem... after battery is fully charged, if i dont remove charger, it start to discharge the battery...

any idea?

Udini · 11-05-2011, 18:59

Quote:

Originally Posted by hs2000

I can't get the solder to stick!! Driving me crazy.

I'm not sure if I'm doing it right.

Pretty much, the blue line signify the one jumper, solder at each end.

And the pink signifies the other jumper, solder at each end again.

I've tried so many times that I'm afraid I'm melting the chips on the reverse side of the USB.

Starting to look black, can't really see the pins anymore. I put everything back together. The phone seems to be working still but still no charging.

Any help?

for Charging only.. you need only Black and Red line.
Blue and Pink lines are USB Rx and Tx.

chandan_123 · 11-05-2011, 22:08

not working bro............

xploremanoj · 11-08-2011, 16:53

hats off dude!!!!!!!!!!!!!

jolly123 · 11-09-2011, 15:44

sonyericsson x10i charging show but no saving battrey

<:SAQI:> · 11-09-2011, 16:29

i fixed many phone with this method i never get any problem make sure you are doing right jump-ring as show in picture

11-09-2011, 15:44	#104 (permalink)
jolly123 Junior Member Join Date: Mar 2008 Posts: 1 Member: 718307 Status: Offline Thanks Meter: 0	sonyericsson x10i charging show but no saving battrey sonyericsson x10i charging show but no saving battrey

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need ericsson 88 cable	migdamas	Old Ericsson Phones & Sony Phones	2	03-24-2017 16:24
Anybody know solution	Robi	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	12-10-2014 12:35
Solution for GSM phones!?!?!?!?	todosije	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	12-16-2010 05:52
NEW ERICSSON A1018 £60 SIEMANS C25 £60 + LOADS MORE	MILLENNIUM-INTERNATIONAL	Main Sales Section	0	08-31-1999 18:54
!!!!!!TO ALL NOKIA 51XX/61XX SP LOCKS 1,2,3,4 SOLUTION latest news!!!!!	spterminator	Main Sales Section	2	08-13-1999 05:55

10-28-2011, 13:16	#92 (permalink)
bryanmir Junior Member Join Date: Aug 2011 Posts: 8 Member: 1642808 Status: Offline Sonork: bryanmir Thanks Meter: 0	I have to solder at usb pin or at the board..?

11-03-2011, 22:33	#99 (permalink)
hs2000 Junior Member Join Date: Dec 2010 Posts: 1 Member: 1471823 Status: Offline Thanks Meter: 0	I can't get the solder to stick!! Driving me crazy. I'm not sure if I'm doing it right. Pretty much, the blue line signify the one jumper, solder at each end. And the pink signifies the other jumper, solder at each end again. I've tried so many times that I'm afraid I'm melting the chips on the reverse side of the USB. Starting to look black, can't really see the pins anymore. I put everything back together. The phone seems to be working still but still no charging. Any help?

11-05-2011, 18:56	#100 (permalink)
Udini Insane Poster Join Date: Oct 2010 Location: Everywhere Posts: 77 Member: 1413143 Status: Offline Thanks Meter: 15	Hi again I have a problem... after battery is fully charged, if i dont remove charger, it start to discharge the battery... any idea?

11-05-2011, 22:08	#102 (permalink)
chandan_123 No Life Poster Join Date: Jun 2008 Location: india Posts: 2,541 Member: 801212 Status: Offline Sonork: 100.1657902 Thanks Meter: 773	not working bro............

11-08-2011, 16:53	#103 (permalink)
xploremanoj Junior Member Join Date: Oct 2010 Posts: 7 Member: 1422162 Status: Offline Thanks Meter: 0	hats off dude!!!!!!!!!!!!!

11-09-2011, 16:29	#105 (permalink)
<:SAQI:> Freak Poster Join Date: Jun 2011 Location: Toronto Canada Posts: 292 Member: 1599578 Status: Offline Sonork: 8114214 Thanks Meter: 131	i fixed many phone with this method i never get any problem make sure you are doing right jump-ring as show in picture