GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box
Reload this Page Infinity Chinese Miracle-2 CM2MT2 v2.38 Beta
Register FAQDonate Forum Rules Root any Device ★iPhone Unlock★ ★ Direct Codes ★ Direct Unlock Source


Reply
Page 1 of 2 1 2
 
LinkBack Thread Tools Display Modes
Old 10-19-2022, 10:31   #1 (permalink)
No Life Poster
 
Tanha0321's Avatar
 
Join Date: Jul 2006
Location: Pakistan karachi
Posts: 9,758
Member: 314003
Status: Offline
Thanks Meter: 2,999
Infinity Chinese Miracle-2 CM2MT2 v2.38 Beta

Code:
!!! WARNING !!!
Backup files storage structure changed, files and folders will be compressed.
Software will convert files and folders at first run!
If you have important data - make /backup/ folder copy for emergency case!
Process may takes time, BE PATIENT!

- META mode connection method revised
- Check free disk space on Flash Read
- Flash Read file selection method updated
- Flash Read process termination revised
- Error messages/hints updated
- "SMART RESET EXTRA" error handling revised to recover after error
- Check free disk space on startup
- Snap to .png instead of .bmp
- Device brand|model detection revised
- Updates checker rebuilded
- "Stop" process revised
- MemTool selection mode for 128 Mb and 256 Mb in list
- MemTool file selection revised
- MemTool operations revised
- "Flash" page minor ui changes
- "Security" page minor ui changes
- "NVRAM Read" operation revised
- "NVRAM Write" operation revised
- NVRAM backup file format changed
- "Restore Backup" operation allow backup file selection
- Check free disk space before backup
- settings.ini new value [where] backup=backup\
- settings.ini new value [where] boot=boot\
- settings.ini new value [where] tools=..\tools\
- Files verification config option in "Settings" page
- Files verification for nvram backup enabled
- Memory management engine revised
- Minor log text messages and ui changes
- Required Dongle firmware version: 0153



https://dl1.infinity-box.com/00/pub/?dir=software/beta/
  Reply With Quote
The Following 3 Users Say Thank You to Tanha0321 For This Useful Post:
Show/Hide list of the thanked
Old 10-19-2022, 11:42   #2 (permalink)
Product Supporter
 
Join Date: Jun 2009
Location: private
Posts: 36,476
Member: 1043909
Status: Offline
Thanks Meter: 60,926
Sir, it's for very experienced engineers only
  Reply With Quote
The Following 2 Users Say Thank You to YellowBoss For This Useful Post:
Old 10-19-2022, 11:56   #3 (permalink)
Freak Poster
 
rashidmohamm's Avatar
 
Join Date: Sep 2011
Location: Sudan
Posts: 479
Member: 1648903
Status: Offline
Thanks Meter: 158
=== [19-10-2022 09:25:46 C:\InfinityBox\CM2MT2\CM2MT2.exe] ===
S/N: 0AF77168 v0153
Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.38
Load IDBase v723487 Ok

Backup files: 18 dirs: 0

Check for updates...
Installed v2.38 Latest v2.37 Required card v0153
No updates found

Update configuration...
Configuration [12060] updated

Load IDBase v723487 Ok

Operation : Reset Settings/Format FS [ v2.38 ]
Mode: SMART RESET
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN: MediaTek PreLoader USB VCOM_V1633 (Android) (COM3)
MODE: PRELOADER PORT
PORT: 3
Waiting BOOT ack...
PRELOADER: ACK confirm FAIL
BROM: Init BROM
BROM init passed
CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
CODE: Cervino
TYPE: MODERN [RAPHAEL]

BROM: SecLevel: 0x00000005
BROM: SecMode : SBC+SDA
BROM: BROM|BL : 0xFF|0x03
BROM: PRELOADER PORT
AGENT: 0_base : BASE_v2112 | Manual : Disabled
AGENT: Looking for suitable BootChain in DA...
AGENT: [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_A llInOne_DA.bin
AGENT: Found MT6765
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
BROM: Reset Interface
PTFN: MediaTek USB Port_V1633 (COM15)
MODE: BOOTROM
PORT: 15
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init BROM
BROM init passed
CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
CODE: Cervino
TYPE: MODERN [RAPHAEL]

BROM: MEID: 47D7587F8D1F82774F7BA93D84E14FEA
BROM: SecLevel: 0x000000E5
BROM: SecMode : SBC+SDA+EXT
BROM: BROM|BL : 0x05|0xFE
BROM: BOOTROM
BROM: SOCID: B2B0411C77111E51CECCC66BF09ED959A024C19A9D59BB28AF 95A74C6A42CDF7
BROM: SLA: Local Auth
BROM: SLA: Starting Auth
BROM: FF : Look for EMI
BROM: FF : EMI found
BROM: SLA: Auth Passed
BROM: SEC: 0x000000E0
AGENT: 0_base : BASE_v2112 | Manual : Disabled
AGENT: Looking for suitable BootChain in DA...
AGENT: [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_A llInOne_DA.bin
AGENT: Found MT6765
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
BROM: DA sent
BROM: Transfer control to DA...
DA: AGENT started
DA: SYNC
DA: MODE: BROM
DA: EXT_RAM NOT initialized

EMMC: CID: 150100514436334D42036C4D9BB69623
EMMC: VEN: Samsung : OEM: 0 : ID: 514436334D42 : PRV: 0x03
EMMC: VEN: Samsung : QD63MB
EMMC: SNN: 1817025462 ( 0x6C4D9BB6 ) MF: 9/2019

EMI: FireFly preloader_s96116aa1.bin with 3 memory type(s) supported
EMI: Init EMI from INTERNAL DB
EMI: EXT_RAM CFG Passed

DA: BOOT to 2nd DA...
DA: 2ND stage confirmed
DA: SYNC with DA passed
DA: Receiving HW info

SRAM: 0x0003A000 [ 232.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: CID: 150100514436334D42036C4D9BB69623
EMMC: VEN: Samsung : OEM: 0 : ID: 514436334D42 : PRV: 0x03
EMMC: VEN: Samsung : QD63MB
EMMC: SNN: 1817025462 ( 0x6C4D9BB6 ) MF: 9/2019

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
CODE: Cervino
TYPE: MODERN [RAPHAEL]
RNID: 21BAB6C44648499890D74A7891284E9


DA: USB: HIGH-SPEED
Boot done

SmartInfo:
AndroidVer: 9 UserDataFS: 0x02 CacheFS: 0x02

Verify device config...
Ok
No loaders to verify
Steps: 6
RESET PROTECTION...
Format Ok: RESET PROTECTION
USERDATA...
Format Ok: USERDATA
CACHE...
Format Ok: CACHE
USERDATA...
Format Ok: USERDATA
Done: 00:00:52
Reconnect Power/Cable now
  Reply With Quote
The Following 2 Users Say Thank You to rashidmohamm For This Useful Post:
Old 10-19-2022, 12:35   #4 (permalink)
Product Supporter
 
Join Date: Jun 2009
Location: private
Posts: 36,476
Member: 1043909
Status: Offline
Thanks Meter: 60,926
I suggest you always make Identify before any other operation due to in this case you will have a backup created automatically.
  Reply With Quote
The Following 2 Users Say Thank You to YellowBoss For This Useful Post:
Old 10-19-2022, 18:01   #5 (permalink)
No Life Poster
 
mbiborna's Avatar
 
Join Date: May 2008
Posts: 3,013
Member: 770503
Status: Offline
Thanks Meter: 1,215
Samsung A10s Frp

Code:
Operation : Memory Tool Init [ v2.38 ]
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN: MediaTek PreLoader USB VCOM_V1632 (Android) (COM7)
MODE: PRELOADER PORT
PORT: 7
Waiting BOOT ack...
PRELOADER: ACK confirmed
BROM: Init BROM
BROM init passed
     CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
     CODE: Cervino
     TYPE: MODERN [RAPHAEL]

BROM: SecLevel: 0x00000005
BROM: SecMode : SBC+SDA
BROM: BROM|BL : 0xFF|0x03
BROM: PRELOADER PORT
AGENT: 0_base : BASE_v2112 | Manual : Disabled
AGENT: Looking for suitable BootChain in DA...
AGENT: [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_AllInOne_DA.bin
AGENT: Found MT6765
AGENT: MTK_DOWNLOAD_AGENT
     BROM: Sending 1st DA...
     BROM: Reset Interface
PTFN: MediaTek USB Port_V1632 (COM3)
MODE: BOOTROM
PORT: 3
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init BROM
BROM init passed
     CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
     CODE: Cervino
     TYPE: MODERN [RAPHAEL]

BROM: MEID: A38EA64358E130414EF5FAB70B827217
BROM: SecLevel: 0x000000E5
BROM: SecMode : SBC+SDA+EXT
BROM: BROM|BL : 0x05|0xFE
BROM: BOOTROM
BROM: SOCID: 157CE76EF11C6546D4A51B3601626E5F566158232F23EE1A0A4FC3D4223B40A6
BROM: SLA: Local Auth
BROM: SLA: Starting Auth
BROM: FF : Look for EMI
BROM: FF : EMI found
BROM: SLA: Auth Passed
BROM: SEC: 0x000000E0
AGENT: 0_base : BASE_v2112 | Manual : Disabled
AGENT: Looking for suitable BootChain in DA...
AGENT: [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_AllInOne_DA.bin
AGENT: Found MT6765
AGENT: MTK_DOWNLOAD_AGENT
     BROM: Sending 1st DA...
BROM: DA sent
BROM: Transfer control to DA... 
     DA: AGENT started
DA: SYNC
     DA: MODE: BROM
DA: EXT_RAM NOT initialized

        EMMC: CID: 150100515836334D42000ACFD40B5777
        EMMC: VEN: Samsung : OEM: 0 : ID: 515836334D42 : PRV: 0x00
        EMMC: VEN: Samsung : QX63MB
        EMMC: SNN: 181392395 ( 0x0ACFD40B ) MF: 5/2020

     EMI: FireFly preloader_s96116ra1.bin with 8 memory type(s) supported
     EMI: Init EMI from INTERNAL DB
     EMI: EXT_RAM CFG Passed

DA: BOOT to 2nd DA...
DA: 2ND stage confirmed
DA: SYNC with DA passed
DA: Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: CID: 150100515836334D42000ACFD40B5777
        EMMC: VEN: Samsung : OEM: 0 : ID: 515836334D42 : PRV: 0x00
        EMMC: VEN: Samsung : QX63MB
        EMMC: SNN: 181392395 ( 0x0ACFD40B ) MF: 5/2020

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

     CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
     CODE: Cervino
     TYPE: MODERN [RAPHAEL]
     RNID: 1FB5915E8E2681C1D68DA184250E0BD


DA: USB: HIGH-SPEED
Boot done

Verify device config...
Ok
No loaders to verify
MemTool storage: C:\InfinityBox\CM2MT2\phdata\
Make right mouse click to see commands
Ready

MemoryTool Operation: Erase Memory
Wait...
Erase selected partitions [1]
[0] Erase partition: PERSISTENT
Erase partition Ok
Operation finished
Close MemoryTool session
Done: 00:00:58
Reconnect Power/Cable now
  Reply With Quote
The Following 2 Users Say Thank You to mbiborna For This Useful Post:
Old 10-19-2022, 18:05   #6 (permalink)
No Life Poster
 
mbiborna's Avatar
 
Join Date: May 2008
Posts: 3,013
Member: 770503
Status: Offline
Thanks Meter: 1,215
WALTON Primo_NF4_2GB
Code:
Operation : Identify Device [ v2.38 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: FLASH
[+] SecureData Backup
[+] AutoBoot
[+] Read Deep Info: PRL, HW, DEBUG
[+] FireFly : AutoEMI
[+] FireFly : FireFly UNI-Proto
[+] Smart Service
[-] Local SLA
[-] Force BROM
Wait...

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN: MediaTek PreLoader USB VCOM_V1632 (Android) (COM7)
MODE: PRELOADER PORT
PORT: 7
Waiting BOOT ack...
PRELOADER: ACK confirmed
BROM: Init BROM
BROM init passed
     CHIP: MT6739 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0002 EVOL: 0x0000 HWC: 0x0699
     CODE: Zion
     TYPE: MODERN [RAPHAEL]

BROM: SecLevel: 0x00000000
BROM: SecMode : PLAIN
BROM: BROM|BL : 0xFF|0x03
BROM: PRELOADER PORT
AGENT: 0_base : BASE_v2112 | Manual : Disabled
AGENT: Looking for suitable BootChain in DA...
AGENT: [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_AllInOne_DA.bin
AGENT: Found MT6739
AGENT: MTK_DOWNLOAD_AGENT
     BROM: Sending 1st DA...
BROM: DA sent
BROM: Transfer control to DA... 
     DA: AGENT started
DA: SYNC
     DA: MODE: PRELOADER
DA: EXT_RAM initialized
DA: BOOT to 2nd DA...
DA: 2ND stage confirmed
DA: SYNC with DA passed
DA: Receiving HW info

        SRAM: 0x00020000 [ 128.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: CID: 90014A4841473265050752004462765D
        EMMC: VEN: Hynix : OEM: 74 : ID: 484147326505 : PRV: 0x07
        EMMC: VEN: Hynix : HAG2e
        EMMC: SNN: 1375749218 ( 0x52004462 ) MF: 7/2019

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x3AB800000 [ 14.68 GB ]

     CHIP: MT6739 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0699
     CODE: Zion
     TYPE: MODERN [RAPHAEL]
     RNID: 567B572EC232B196AA776D8DC89131F2


DA: USB: HIGH-SPEED

Boot done

Patch Level : PPR1.180610.011
Display ID : Primo_NF4_2GB_20190810_V12
SW Version : 82101
Ver. CodeName : REL
Ver. Release : 9
Sec. Patch : 2019-05-05
Build Time : 10.08.2019
Product Model : Primo_NF4_2GB
Product Brand : WALTON
Product Name : Primo_NF4_2GB
Product Device : Primo_NF4_2GB
CPU : armeabi-v7a,armeabi
Product Manfct : WALTON
Product Info : Primo_NF4_2GB
SW : Primo_NF4_2GB-user 9 PPR1.180610.011 82101 release-keys
Product Board : WALTON
Board Platform : mt6739

USERDATA : FILESYSTEM : EXT4  with FDE ( Full Disk Encryption **)

Verify device config...
Ok
No loaders to verify
NVRAM: TK_MD_BASIC_MDBIN_PCB01_MT6739_S00.MOLY_LR12A_R2_MP_V74_15
NVRAM: Items: 0x9E Size: 0x08B6A1
NVRAM: State: Ok
INFO  : WiFi MAC: AA0036004400
INFO  : BlTh MAC: 40DB5B94D556
INFO  : IMEI[1]: 353376101413893
INFO  : IMEI[2]: 353376101413901

Backup critical data [18] to C:\InfinityBox\CM2MT2\backup\MT6739__567B572EC232B196AA776D8DC89131F2\
[22] Read: NVRAM
[8] Read: NVDATA
[15] Read: PROINFO
[23] Read: LK
[7] Read: NVCFG
[10] Read: PROTECT1
[1] Read: PGPT
[13] Read: PERSIST
[0] Read: PRELOADER
Done
Compact: C:\InfinityBox\CM2MT2\backup\MT6739__567B572EC232B196AA776D8DC89131F2\
Cleanup...
Ok
Verify nvram C:\InfinityBox\CM2MT2\backup\MT6739__567B572EC232B196AA776D8DC89131F2.zip
Stored
Ok

STORAGE : Life Status : eMMC : OK!
STORAGE : OTP Status : NOT Enabled!
STORAGE : RPMB Status : eMMC : RPMB  KEY PROGRAMMED [UNUSABLE]
Scan preloader...
Preloader:
 EMI: MT6739 preloader_primo_nf4_2gb.bin with 6 memory type(s) supported
 EMI[00] : eMMC : DDR3 : ID: 13014E51324A333643   : Ven: Micron    | Dev: Q2J36C : RAM: [ 2.00 GB ]
 EMI[01] : eMMC : DDR3 : ID: 150100514536334D42   : Ven: Samsung   | Dev: QE63MB : RAM: [ 2.00 GB ]
 EMI[02] : eMMC : DDR3 : ID: 150100523832314D42   : Ven: Samsung   | Dev: R821MB : RAM: [ 2.00 GB ]
 EMI[03] : eMMC : DDR3 : ID: 90014A484147346132   : Ven: Hynix     | Dev: HAG4a2 : RAM: [ 2.00 GB ]
 EMI[04] : eMMC : DDR3 : ID: 90014A484147326505   : Ven: Hynix     | Dev: HAG2e : RAM: [ 2.00 GB ]
 EMI[05] : eMMC : DDR3 : ID: 150100524531424D42   : Ven: Samsung   | Dev: RE1BMB : RAM: [ 3.00 GB ]
Preloader saved to: C:\InfinityBox\CM2MT2\backup\PRELOADER\preloader_primo_nf4_2gb.bin
Verify C:\InfinityBox\CM2MT2\backup\PRELOADER\preloader_primo_nf4_2gb.bin [297000dd]...
Exist
Ok
Done
Elapsed: 00:02:00

Operation : Read Firmware [ v2.38 ]
[+] ExtSparse
[-] ForceRead

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN: MediaTek PreLoader USB VCOM_V1632 (Android) (COM7)
MODE: PRELOADER PORT
PORT: 7
Waiting BOOT ack...
PRELOADER: ACK confirmed
BROM: Init BROM
BROM init passed
     CHIP: MT6739 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0002 EVOL: 0x0000 HWC: 0x0699
     CODE: Zion
     TYPE: MODERN [RAPHAEL]

BROM: SecLevel: 0x00000000
BROM: SecMode : PLAIN
BROM: BROM|BL : 0xFF|0x03
BROM: PRELOADER PORT
AGENT: 0_base : BASE_v2112 | Manual : Disabled
AGENT: Looking for suitable BootChain in DA...
AGENT: [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_AllInOne_DA.bin
AGENT: Found MT6739
AGENT: MTK_DOWNLOAD_AGENT
     BROM: Sending 1st DA...
BROM: DA sent
BROM: Transfer control to DA... 
     DA: AGENT started
DA: SYNC
     DA: MODE: PRELOADER
DA: EXT_RAM initialized
DA: BOOT to 2nd DA...
DA: 2ND stage confirmed
DA: SYNC with DA passed
DA: Receiving HW info

        SRAM: 0x00020000 [ 128.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: CID: 90014A4841473265050752004462765D
        EMMC: VEN: Hynix : OEM: 74 : ID: 484147326505 : PRV: 0x07
        EMMC: VEN: Hynix : HAG2e
        EMMC: SNN: 1375749218 ( 0x52004462 ) MF: 7/2019

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x3AB800000 [ 14.68 GB ]

     CHIP: MT6739 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0699
     CODE: Zion
     TYPE: MODERN [RAPHAEL]
     RNID: 567B572EC232B196AA776D8DC89131F2


DA: USB: HIGH-SPEED

Boot done

Patch Level : PPR1.180610.011
Display ID : Primo_NF4_2GB_20190810_V12
SW Version : 82101
Ver. CodeName : REL
Ver. Release : 9
Sec. Patch : 2019-05-05
Build Time : 10.08.2019
Product Model : Primo_NF4_2GB
Product Brand : WALTON
Product Name : Primo_NF4_2GB
Product Device : Primo_NF4_2GB
CPU : armeabi-v7a,armeabi
Product Manfct : WALTON
Product Info : Primo_NF4_2GB
SW : Primo_NF4_2GB-user 9 PPR1.180610.011 82101 release-keys
Product Board : WALTON
Board Platform : mt6739

MT6739__WALTON__rimo_NF4_2GB__o_NF4_2GB_20190810_V12__1.180610.011__imo_NF4_2GB

Read: preloader.bin
Read: recovery.img
Read: persist.img
ExtSparse: Compression ratio: 75%
Read: proinfo.img
Read: md1rom.img
Read: md1dsp.img
Read: spmfw.img
Read: mcupmfw.img
Read: nvram.bin
Read: lk.bin
Read: loader_ext.img
Read: boot.img
Read: logo.bin
Read: dtbo.img
Read: tz.img
Read: vendor.img
ExtSparse: Compression ratio: 47%
Read: system.img
ExtSparse: Compression ratio: 20%
Read: cache.img
Read: userdata.img

FW Size: 2.35 GB
Android Info saved: _Android_info.txt
Scatter: MT6739_Android_scatter.txt
Saved to: C:\Users\mbibo\OneDrive\Desktop\MT6739__WALTON__rimo_NF4_2GB__o_NF4_2GB_20190810_V12__1.180610.011__imo_NF4_2GB\
Verify firmware [MT6739__WALTON__rimo_NF4_2GB__o_NF4_2GB_20190810_V12__1.180610.011__imo_NF4_2GB]...
Firmware is unknown
Please upload file this way https://infinity-box.com/?r=100020
Verify device config...
Ok
No loaders to verify
Done
Elapsed: 00:03:03

Operation : Reset Settings/Format FS [ v2.38 ]
Mode: FRP [ RESET PROTECTION ]

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN: MediaTek PreLoader USB VCOM_V1632 (Android) (COM7)
MODE: PRELOADER PORT
PORT: 7
Waiting BOOT ack...
PRELOADER: ACK confirmed
BROM: Init BROM
BROM init passed
     CHIP: MT6739 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0002 EVOL: 0x0000 HWC: 0x0699
     CODE: Zion
     TYPE: MODERN [RAPHAEL]

BROM: SecLevel: 0x00000000
BROM: SecMode : PLAIN
BROM: BROM|BL : 0xFF|0x03
BROM: PRELOADER PORT
AGENT: 0_base : BASE_v2112 | Manual : Disabled
AGENT: Looking for suitable BootChain in DA...
AGENT: [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_AllInOne_DA.bin
AGENT: Found MT6739
AGENT: MTK_DOWNLOAD_AGENT
     BROM: Sending 1st DA...
BROM: DA sent
BROM: Transfer control to DA... 
     DA: AGENT started
DA: SYNC
     DA: MODE: PRELOADER
DA: EXT_RAM initialized
DA: BOOT to 2nd DA...
DA: 2ND stage confirmed
DA: SYNC with DA passed
DA: Receiving HW info

        SRAM: 0x00020000 [ 128.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: CID: 90014A4841473265050752004462765D
        EMMC: VEN: Hynix : OEM: 74 : ID: 484147326505 : PRV: 0x07
        EMMC: VEN: Hynix : HAG2e
        EMMC: SNN: 1375749218 ( 0x52004462 ) MF: 7/2019

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x3AB800000 [ 14.68 GB ]

     CHIP: MT6739 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0699
     CODE: Zion
     TYPE: MODERN [RAPHAEL]
     RNID: 567B572EC232B196AA776D8DC89131F2


DA: USB: HIGH-SPEED

Boot done

Verify device config...
Ok
No loaders to verify
Format Ok: RESET PROTECTION
Done
Elapsed: 00:00:19
Reconnect Power/Cable now


Operation : HW Report [ v2.38 ]
HW Report Mode: eMMC

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN: MediaTek PreLoader USB VCOM_V1632 (Android) (COM7)
MODE: PRELOADER PORT
PORT: 7
Waiting BOOT ack...
PRELOADER: ACK confirmed
BROM: Init BROM
BROM init passed
     CHIP: MT6739 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0002 EVOL: 0x0000 HWC: 0x0699
     CODE: Zion
     TYPE: MODERN [RAPHAEL]

BROM: SecLevel: 0x00000000
BROM: SecMode : PLAIN
BROM: BROM|BL : 0xFF|0x03
BROM: PRELOADER PORT
AGENT: 0_base : BASE_v2112 | Manual : Disabled
AGENT: Looking for suitable BootChain in DA...
AGENT: [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_AllInOne_DA.bin
AGENT: Found MT6739
AGENT: MTK_DOWNLOAD_AGENT
     BROM: Sending 1st DA...
BROM: DA sent
BROM: Transfer control to DA... 
     DA: AGENT started
DA: SYNC
     DA: MODE: PRELOADER
DA: EXT_RAM initialized
DA: BOOT to 2nd DA...
DA: 2ND stage confirmed
DA: SYNC with DA passed
DA: Receiving HW info

        SRAM: 0x00020000 [ 128.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: CID: 90014A4841473265050752004462765D
        EMMC: VEN: Hynix : OEM: 74 : ID: 484147326505 : PRV: 0x07
        EMMC: VEN: Hynix : HAG2e
        EMMC: SNN: 1375749218 ( 0x52004462 ) MF: 7/2019

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x3AB800000 [ 14.68 GB ]

     CHIP: MT6739 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0699
     CODE: Zion
     TYPE: MODERN [RAPHAEL]
     RNID: 567B572EC232B196AA776D8DC89131F2


DA: USB: HIGH-SPEED

Boot done

Memory Info :
    CID: 90014A4841473265050752004462765D
    MEM: Ven: Hynix     | OEM: 4A01 | Dev: HAG2e

EXT_CSD Info:

    TRIM timeout          : 0 ms
    Secure erase timeout  : 6000 ms
    Secure trim timeout   : 6000 ms
    HC erase unit size    : 512 kbytes
    HC erase timeout      : 600 ms
    HC write prot grp size: 8192 kbytes
    HC erase grp def.     : 0h
    Sector count          : 1d5c000h
    HS timing             : 0h
    Bus width             : 0h
    Erase memory content  : 0h
    Partition config      : 48h
    Boot partition size   : 4096 kbytes
    Boot information      : 7h
    Boot config protection: 0h
    Boot bus width        : 0h
    Boot area write prot  : 0h
    User area write prot  : 0h
    RPMB size             : 4096 kbytes
    H/W reset function    : 1h
    FW version(low)   : 70h

Overall status :

    STORAGE : Life Status : eMMC : OK!


    RPMB : RPMB  KEY PROGRAMMED [UNUSABLE]


    STORAGE : OTP Status : NOT Enabled!

Done
Elapsed: 00:00:33
  Reply With Quote
The Following 2 Users Say Thank You to mbiborna For This Useful Post:
Old 10-20-2022, 00:12   #7 (permalink)
Moderator
 
Brka's Avatar
 
Join Date: Jun 1999
Location: Serbia
Age: 48
Posts: 8,207
Member: 163
Status: Offline
Thanks Meter: 7,786
Quote:
Originally Posted by YellowBoss View Post
I suggest you always make Identify before any other operation due to in this case you will have a backup created automatically.
... or, maybe ultimate solution - upon boot, check if backup exists,
if not - auto-make it, or force to do identify first ?

that way even #1 noob can't say "cm2 killed my phone"

not to mention that for full flash format - this should be a must.

b.r.
Alex
__________________
Always press THANKS button if my post was helpful!
Please DO NOT send me PM's for help, You can ask for help on forum
Do not post THANKS posts - use thanks button !
ALWAYS use SEARCH button before posting!
  Reply With Quote
The Following 3 Users Say Thank You to Brka For This Useful Post:
Show/Hide list of the thanked
Old 10-20-2022, 00:20   #8 (permalink)
Product Supporter
 
Join Date: Jun 2009
Location: private
Posts: 36,476
Member: 1043909
Status: Offline
Thanks Meter: 60,926
Quote:
Originally Posted by Brka View Post
... or, maybe ultimate solution - upon boot, check if backup exists,
if not - auto-make it, or force to do identify first ?

that way even #1 noob can't say "cm2 killed my phone"

not to mention that for full flash format - this should be a must.

b.r.
Alex
Hi,
Yes, just uploaded beta make backup during Identify and Reset and check is previous backup exist.

Making step-by-step
  Reply With Quote
The Following 2 Users Say Thank You to YellowBoss For This Useful Post:
Old 10-20-2022, 08:56   #9 (permalink)
No Life Poster
 
Akhtar Ali Jatt's Avatar
 
Join Date: Jan 2009
Location: Sindh Pakistan
Posts: 8,878
Member: 953334
Status: Offline
Sonork: 100.1614005
Thanks Meter: 15,424
Smile Oppo A1k Smart Reset Done V2.38
Operation : Reset Settings/Format FS [ v2.38 ]
Mode: SMART RESET
[+] Sensitive Data Backup
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN: MediaTek USB Port_V1632 (COM3)
MODE: BOOTROM
PORT: 3
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init BROM
BROM init passed
CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
CODE: Cervino
TYPE: MODERN [RAPHAEL]

BROM: MEID: 63FD924825DBDAF1F2A63B59593A40AC
BROM: SecLevel: 0x000000E5
BROM: SecMode : SBC+SDA+EXT
BROM: BROM|BL : 0x05|0xFE
BROM: BOOTROM
BROM: SOCID: 20F33ED859636C29AA82DABD87B57EAA868ED78EC6067D522B 6D7B927594BB6E
BROM: Sending FireFly
FireFly: Starting...
FireFly: Init Core
FireFly: Core init done
FireFly: Running : v05.05.05 on MT6765
FireFly: eMMC init passed

EMMC: CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC: CSD: TEMP_WRITE_PROTECT: False
EMMC: CSD: PERM_WRITE_PROTECT: False

EMMC: CID: 150100514436334D4203DA5307CDB6ED
EMMC: VEN: Samsung : OEM: 0 : ID: 514436334D42 : PRV: 0x03
EMMC: VEN: Samsung : QD63MB
EMMC: SNN: 3662874573 ( 0xDA5307CD ) MF: 11/2019

EMMC: EXTCSD: rev1.8 ( eMMC 5.1 )
EMMC: EXTCSD [CONFIG] : 0x48 0x02 0x01
EMMC: EXTCSD [PARTITION_CONFIG] : 0x48
EMMC: EXTCSD [BOOT_BUS_WIDTH] : 0x02
EMMC: EXTCSD [RST_N_FUNCTION] : 0x01
EMMC: EXTCSD [PART_S_COMPLETED] : False
EMMC: EXTCSD [SIZE] : Market : 32 GB
EMMC: EXTCSD [SIZE] : Actual : 0x747C00000 [ 29.12 GB ]
EMMC: EXTCSD [EOL] : EOL status : Normal ( Less than 80% reserved blocks used )
EMMC: EXTCSD [EOL_A] : SLC status : 10% - 20% used
EMMC: EXTCSD [EOL_B] : MLC status : 10% - 20% used

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

DA: USB: HIGH-SPEED
Boot done

Reading...
SmartInfo:
AndroidVer: 9 UserDataFS: 0x02 CacheFS: 0x02

Verify device config...
Ok
No loaders to verify
Backup already exist. Overwrite?
No
Steps: 6
RESET PROTECTION...
Format Ok: RESET PROTECTION
USERDATA...
Format Ok: USERDATA
CACHE...
Format Ok: CACHE
USERDATA...
Format Ok: USERDATA
Done: 00:01:06
Reconnect Power/Cable now
  Reply With Quote
The Following 2 Users Say Thank You to Akhtar Ali Jatt For This Useful Post:
Old 10-20-2022, 12:13   #10 (permalink)
No Life Poster
 
mbiborna's Avatar
 
Join Date: May 2008
Posts: 3,013
Member: 770503
Status: Offline
Thanks Meter: 1,215
Realme C25s RMX3195
Code:
Operation : Identify Device [ v2.38 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: FLASH
[+] SecureData Backup
[+] AutoBoot
[+] Read Deep Info: PRL, HW, DEBUG
[+] FireFly : AutoEMI
[+] FireFly : FireFly UNI-Proto
[+] Smart Service
[-] Local SLA
[-] Force BROM
Wait...

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN: MediaTek USB Port_V1632 (COM9)
MODE: BOOTROM
PORT: 9
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init BROM
BROM init passed
     CHIP: MT6768 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0707
     CODE: Talbot
     TYPE: MODERN [RAPHAEL]

BROM: MEID: 3C494EF40ACEAC7D1B55151AD446DD13
BROM: SecLevel: 0x000000E5
BROM: SecMode : SBC+SDA+EXT
BROM: BROM|BL : 0x05|0xFE
BROM: BOOTROM
BROM: SOCID: 1B3F03A5B03CB545EEAFA052593091B4C9C8410EA8369DC2096A6BF764B31741
BROM: SLA: Local Auth
BROM: SLA: Starting Auth
BROM: SLA: Auth Passed
BROM: SEC: 0x000000E0
AGENT: 0_base : BASE_v2112 | Manual : Disabled
AGENT: Looking for suitable BootChain in DA...
AGENT: [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_AllInOne_DA.bin
AGENT: Found MT6768
AGENT: MTK_DOWNLOAD_AGENT
     BROM: Sending 1st DA...
BROM: DA sent
BROM: Transfer control to DA... 
     DA: AGENT started
DA: SYNC
     DA: MODE: BROM
DA: EXT_RAM NOT initialized

        EMMC: CID: 150100445636444142028268CAC4A815
        EMMC: VEN: Samsung : OEM: 0 : ID: 445636444142 : PRV: 0x02
        EMMC: VEN: Samsung : DV6DAB
        EMMC: SNN: 2187905732 ( 0x8268CAC4 ) MF: 10/2021

     EMI: FireFly preloader_k69v1_64.bin with 20 memory type(s) supported
     EMI: Init EMI from INTERNAL DB
     EMI: EXT_RAM CFG Passed

DA: BOOT to 2nd DA...
DA: 2ND stage confirmed
DA: SYNC with DA passed
DA: Receiving HW info

        SRAM: 0x00070000 [ 448.00 KB ]
        DRAM: 0x100000000 [ 4.00 GB ]

        EMMC: CID: 150100445636444142028268CAC4A815
        EMMC: VEN: Samsung : OEM: 0 : ID: 445636444142 : PRV: 0x02
        EMMC: VEN: Samsung : DV6DAB
        EMMC: SNN: 2187905732 ( 0x8268CAC4 ) MF: 10/2021

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x1D1EC00000 [ 116.48 GB ]

     CHIP: MT6768 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x0707
     CODE: Talbot
     TYPE: MODERN [RAPHAEL]
     RNID: AB5270A8B8B4A37EB76915EBA9388179


DA: USB: HIGH-SPEED
Boot done

USERDATA : ENCRYPTED

NVRAM: k69v1_64_2167A_MDBIN_PCB01_MT6768_S00.MOLY_LR12A_R2_TC16_PR11_SP_V2_P5
NVRAM: Items: 0xAA Size: 0x08CA0E
NVRAM: State: Ok
INFO  : WiFi MAC: AA0036004400
INFO  : BlTh MAC: 0C90435E7A88

Verify device config...
Ok
No loaders to verify
Backup critical data [18] to C:\InfinityBox\CM2MT2\backup\MT6768__3C494EF40ACEAC7D1B55151AD446DD13\
[25] Read: NVRAM
[17] Read: NVDATA
[23] Read: PROINFO
[37] Read: LK
[16] Read: NVCFG
[19] Read: PROTECT1
[1] Read: PGPT
[18] Read: PERSIST
[0] Read: PRELOADER
[7] Read: OPPORESERVE3
[8] Read: OPPO_CUSTOM
Done
Compact: C:\InfinityBox\CM2MT2\backup\MT6768__3C494EF40ACEAC7D1B55151AD446DD13\
Cleanup...
Ok: 11
Verify C:\InfinityBox\CM2MT2\backup\MT6768__3C494EF40ACEAC7D1B55151AD446DD13.zip
Verified
Ok

STORAGE : Life Status : eMMC : OK!
STORAGE : OTP Status : UNLOCKED!
STORAGE : RPMB Status : eMMC : RPMB  KEY PROGRAMMED [UNUSABLE]
Scan preloader...
Preloader:
 EMI: MT6752 preloader_k69v1_64.bin with 20 memory type(s) supported
 EMI[00] : eMMC : LP_DDR4X : ID: 150100445636444D42   : Ven: Samsung   | Dev: DV6DMB : RAM: [ 4.00 GB ]
 EMI[01] : eMMC : LP_DDR4X : ID: 13014E53304A394B39   : Ven: Micron    | Dev: S0J9K9 : RAM: [ 4.00 GB ]
 EMI[02] : eMMC : LP_DDR4X : ID: 150100444436384D42   : Ven: Samsung   | Dev: DD68MB : RAM: [ 3.00 GB ]
 EMI[03] : eMMC : LP_DDR4X : ID: 150100444836444142   : Ven: Samsung   | Dev: DH6DAB : RAM: [ 4.00 GB ]
 EMI[04] : eMMC : LP_DDR4X : ID: 90014A68433861503E   : Ven: Hynix     | Dev: hC8aP> : RAM: [ 3.00 GB ]
 EMI[05] : eMMC : LP_DDR4X : ID: 90014A684339615033   : Ven: Hynix     | Dev: hC9aP3 : RAM: [ 4.00 GB ]
 EMI[06] : eMMC : LP_DDR4X : ID: 150100445036384D42   : Ven: Samsung   | Dev: DP68MB : RAM: [ 3.00 GB ]
 EMI[07] : eMMC : LP_DDR4X : ID: 90014A68423861503E   : Ven: Hynix     | Dev: hB8aP> : RAM: [ 3.00 GB ]
 EMI[08] : eMMC : LP_DDR4X : ID: 1501003458364B4D42   : Ven: Samsung   | Dev: 4X6KMB : RAM: [ 2.00 GB ]
 EMI[09] : eMMC : LP_DDR4X : ID: 450100444134313238   : Ven: Sandisk   | Dev: DA4128 : RAM: [ 4.00 GB ]
 EMI[0A] : eMMC : LP_DDR4X : ID: 90014A68423861503E   : Ven: Hynix     | Dev: hB8aP> : RAM: [ 2.00 GB ]
 EMI[0B] : eMMC : LP_DDR4X : ID: 150100334836434142   : Ven: Samsung   | Dev: 3H6CAB : RAM: [ 6.00 GB ]
 EMI[0C] : eMMC : LP_DDR4X : ID: 90014A68433861503E   : Ven: Hynix     | Dev: hC8aP> : RAM: [ 6.00 GB ]
 EMI[0D] : eMMC : LP_DDR4X : ID: 13014E47314A395238   : Ven: Micron    | Dev: G1J9R8 : RAM: [ 4.00 GB ]
 EMI[0E] : eMMC : LP_DDR4X : ID: 13014E47314A395339   : Ven: Micron    | Dev: G1J9S9 : RAM: [ 4.00 GB ]
 EMI[0F] : eMMC : LP_DDR4X : ID: 150100445836384D42   : Ven: Samsung   | Dev: DX68MB : RAM: [ 3.00 GB ]
 EMI[10] : eMMC : LP_DDR4X : ID: 150100445036444142   : Ven: Samsung   | Dev: DP6DAB : RAM: [ 4.00 GB ]
 EMI[11] : eMMC : LP_DDR4X : ID: 150100445636444142   : Ven: Samsung   | Dev: DV6DAB : RAM: [ 4.00 GB ]
 EMI[12] : eMMC : LP_DDR4X : ID: 150100445636444242   : Ven: Samsung   | Dev: DV6DBB : RAM: [ 4.00 GB ]
 EMI[13] : eMMC : LP_DDR4X : ID: 150100445036444242   : Ven: Samsung   | Dev: DP6DBB : RAM: [ 4.00 GB ]
Preloader exist: C:\InfinityBox\CM2MT2\backup\PRELOADER\preloader_k69v1_64.bin
Verify C:\InfinityBox\CM2MT2\backup\PRELOADER\preloader_k69v1_64.bin [58d3950f]...
Exist
Ok
Done: 00:01:37

Operation : Reset Settings/Format FS [ v2.38 ]
Mode: FRP [ RESET PROTECTION ]
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN: MediaTek USB Port_V1632 (COM9)
MODE: BOOTROM
PORT: 9
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init BROM
BROM init passed
     CHIP: MT6768 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0707
     CODE: Talbot
     TYPE: MODERN [RAPHAEL]

BROM: MEID: 3C494EF40ACEAC7D1B55151AD446DD13
BROM: SecLevel: 0x000000E5
BROM: SecMode : SBC+SDA+EXT
BROM: BROM|BL : 0x05|0xFE
BROM: BOOTROM
BROM: SOCID: 1B3F03A5B03CB545EEAFA052593091B4C9C8410EA8369DC2096A6BF764B31741
BROM: SLA: Local Auth
BROM: SLA: Starting Auth
BROM: SLA: Auth Passed
BROM: SEC: 0x000000E0
AGENT: 0_base : BASE_v2112 | Manual : Disabled
AGENT: Looking for suitable BootChain in DA...
AGENT: [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_AllInOne_DA.bin
AGENT: Found MT6768
AGENT: MTK_DOWNLOAD_AGENT
     BROM: Sending 1st DA...
BROM: DA sent
BROM: Transfer control to DA... 
     DA: AGENT started
DA: SYNC
     DA: MODE: BROM
DA: EXT_RAM NOT initialized

        EMMC: CID: 150100445636444142028268CAC4A815
        EMMC: VEN: Samsung : OEM: 0 : ID: 445636444142 : PRV: 0x02
        EMMC: VEN: Samsung : DV6DAB
        EMMC: SNN: 2187905732 ( 0x8268CAC4 ) MF: 10/2021

     EMI: FireFly preloader_k69v1_64.bin with 20 memory type(s) supported
     EMI: Init EMI from INTERNAL DB
     EMI: EXT_RAM CFG Passed

DA: BOOT to 2nd DA...
DA: 2ND stage confirmed
DA: SYNC with DA passed
DA: Receiving HW info

        SRAM: 0x00070000 [ 448.00 KB ]
        DRAM: 0x100000000 [ 4.00 GB ]

        EMMC: CID: 150100445636444142028268CAC4A815
        EMMC: VEN: Samsung : OEM: 0 : ID: 445636444142 : PRV: 0x02
        EMMC: VEN: Samsung : DV6DAB
        EMMC: SNN: 2187905732 ( 0x8268CAC4 ) MF: 10/2021

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x1D1EC00000 [ 116.48 GB ]

     CHIP: MT6768 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x0707
     CODE: Talbot
     TYPE: MODERN [RAPHAEL]
     RNID: AB5270A8B8B4A37EB76915EBA9388179


DA: USB: HIGH-SPEED
Boot done

Verify device config...
Ok
No loaders to verify
Steps: 1
RESET PROTECTION...
Format Ok: RESET PROTECTION
Done: 00:00:22
Reconnect Power/Cable now
  Reply With Quote
The Following 2 Users Say Thank You to mbiborna For This Useful Post:
Old 10-20-2022, 16:13   #11 (permalink)
No Life Poster
 
mbiborna's Avatar
 
Join Date: May 2008
Posts: 3,013
Member: 770503
Status: Offline
Thanks Meter: 1,215
Oppo A83
Code:
Operation : Reset Settings/Format FS [ v2.38 ]
Mode: SMART RESET
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN: MediaTek USB Port_V1632 (COM9)
MODE: BOOTROM
PORT: 9
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init BROM
BROM init passed
     CHIP: MT6763 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x0690
     CODE: Bianco
     TYPE: MODERN [RAPHAEL]

BROM: MEID: C1CFBAB11BE7D5A2AD0DB89B269316F7
BROM: SecLevel: 0x000000E5
BROM: SecMode : SBC+SDA+EXT
BROM: BROM|BL : 0x05|0xFE
BROM: BOOTROM
BROM: SOCID: F0ADADAAAA95B9B6FA7D44E988ACBEC68D5F218FBFB3C9867AE0DF7DAADDDA61
BROM: SLA: Local Auth
BROM: SLA: Starting Auth
BROM: SLA: Auth Passed
BROM: SEC: 0x000000E0
AGENT: 0_base : BASE_v2112 | Manual : Disabled
AGENT: Looking for suitable BootChain in DA...
AGENT: [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_AllInOne_DA.bin
AGENT: Found MT6763
AGENT: MTK_DOWNLOAD_AGENT
     BROM: Sending 1st DA...
BROM: DA sent
BROM: Transfer control to DA... 
     DA: AGENT started
DA: SYNC
     DA: MODE: BROM
DA: EXT_RAM NOT initialized

        EMMC: CID: 150100514536334D4203AB8CD21C35A1
        EMMC: VEN: Samsung : OEM: 0 : ID: 514536334D42 : PRV: 0x03
        EMMC: VEN: Samsung : QE63MB
        EMMC: SNN: 2878132764 ( 0xAB8CD21C ) MF: 3/2018

     EMI: INFINITY PRELOADER_INFINITY_0 with 1 memory type(s) supported
     EMI: Init EMI from INTERNAL DB
     EMI: EXT_RAM CFG Passed

DA: BOOT to 2nd DA...
DA: 2ND stage confirmed
DA: SYNC with DA passed
DA: Receiving HW info

        SRAM: 0x00040000 [ 256.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: CID: 150100514536334D4203AB8CD21C35A1
        EMMC: VEN: Samsung : OEM: 0 : ID: 514536334D42 : PRV: 0x03
        EMMC: VEN: Samsung : QE63MB
        EMMC: SNN: 2878132764 ( 0xAB8CD21C ) MF: 3/2018

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x3A3E00000 [ 14.56 GB ]

     CHIP: MT6763 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0690
     CODE: Bianco
     TYPE: MODERN [RAPHAEL]
     RNID: 2AEF87A1D82FBF414F492BA4D4EA2895


DA: USB: HIGH-SPEED
Boot done

SmartInfo:
AndroidVer: 7 UserDataFS: 0x01 CacheFS: 0x01

Verify device config...
Ok
No loaders to verify
Steps: 6
RESET PROTECTION...
Format Ok: RESET PROTECTION
USERDATA...
Format Ok: USERDATA
CACHE...
Format Ok: CACHE
USERDATA...
Format Ok: USERDATA
Done: 00:00:50
Reconnect Power/Cable now
  Reply With Quote
The Following User Says Thank You to mbiborna For This Useful Post:
Old 10-20-2022, 19:04   #12 (permalink)
Product Supporter
 
Join Date: Jun 2009
Location: private
Posts: 36,476
Member: 1043909
Status: Offline
Thanks Meter: 60,926
Quote:
Originally Posted by mbiborna View Post
Code:
Operation : Reset Settings/Format FS [ v2.38 ]
Mode: SMART RESET
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN: MediaTek USB Port_V1632 (COM9)
MODE: BOOTROM
PORT: 9
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init BROM
BROM init passed
     CHIP: MT6763 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x0690
     CODE: Bianco
     TYPE: MODERN [RAPHAEL]

BROM: MEID: C1CFBAB11BE7D5A2AD0DB89B269316F7
BROM: SecLevel: 0x000000E5
BROM: SecMode : SBC+SDA+EXT
BROM: BROM|BL : 0x05|0xFE
BROM: BOOTROM
BROM: SOCID: F0ADADAAAA95B9B6FA7D44E988ACBEC68D5F218FBFB3C9867AE0DF7DAADDDA61
BROM: SLA: Local Auth
BROM: SLA: Starting Auth
BROM: SLA: Auth Passed
BROM: SEC: 0x000000E0
AGENT: 0_base : BASE_v2112 | Manual : Disabled
AGENT: Looking for suitable BootChain in DA...
AGENT: [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_AllInOne_DA.bin
AGENT: Found MT6763
AGENT: MTK_DOWNLOAD_AGENT
     BROM: Sending 1st DA...
BROM: DA sent
BROM: Transfer control to DA... 
     DA: AGENT started
DA: SYNC
     DA: MODE: BROM
DA: EXT_RAM NOT initialized

        EMMC: CID: 150100514536334D4203AB8CD21C35A1
        EMMC: VEN: Samsung : OEM: 0 : ID: 514536334D42 : PRV: 0x03
        EMMC: VEN: Samsung : QE63MB
        EMMC: SNN: 2878132764 ( 0xAB8CD21C ) MF: 3/2018

     EMI: INFINITY PRELOADER_INFINITY_0 with 1 memory type(s) supported
     EMI: Init EMI from INTERNAL DB
     EMI: EXT_RAM CFG Passed

DA: BOOT to 2nd DA...
DA: 2ND stage confirmed
DA: SYNC with DA passed
DA: Receiving HW info

        SRAM: 0x00040000 [ 256.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: CID: 150100514536334D4203AB8CD21C35A1
        EMMC: VEN: Samsung : OEM: 0 : ID: 514536334D42 : PRV: 0x03
        EMMC: VEN: Samsung : QE63MB
        EMMC: SNN: 2878132764 ( 0xAB8CD21C ) MF: 3/2018

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x3A3E00000 [ 14.56 GB ]

     CHIP: MT6763 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0690
     CODE: Bianco
     TYPE: MODERN [RAPHAEL]
     RNID: 2AEF87A1D82FBF414F492BA4D4EA2895


DA: USB: HIGH-SPEED
Boot done

SmartInfo:
AndroidVer: 7 UserDataFS: 0x01 CacheFS: 0x01

Verify device config...
Ok
No loaders to verify
Steps: 6
RESET PROTECTION...
Format Ok: RESET PROTECTION
USERDATA...
Format Ok: USERDATA
CACHE...
Format Ok: CACHE
USERDATA...
Format Ok: USERDATA
Done: 00:00:50
Reconnect Power/Cable now
more small improvements and fixes, just uploaded https://infinity-box.com/?r=100202
  Reply With Quote
The Following 2 Users Say Thank You to YellowBoss For This Useful Post:
Old 10-21-2022, 06:42   #13 (permalink)
No Life Poster
 
drjaved_akhter's Avatar
 
Join Date: Sep 2007
Location: PAKISTAN
Posts: 1,130
Member: 585807
Status: Offline
Thanks Meter: 781
beta verson 2.38g found virus and not run.
windows defender caled trojan:win32/wacatac.B?ml
  Reply With Quote
Old 10-21-2022, 19:17   #14 (permalink)
Product Supporter
 
Join Date: Jun 2009
Location: private
Posts: 36,476
Member: 1043909
Status: Offline
Thanks Meter: 60,926
Quote:
Originally Posted by drjaved_akhter View Post
beta verson 2.38g found virus and not run.
windows defender caled trojan:win32/wacatac.B?ml
it's fault of windows defender, bad luck it can not understand the difference in "infected" and "protected" exe.
Anyway updated "2.38h" version was uploaded short time ago, try it
  Reply With Quote
The Following 2 Users Say Thank You to YellowBoss For This Useful Post:
Old 10-22-2022, 06:49   #15 (permalink)
No Life Poster
 
Akhtar Ali Jatt's Avatar
 
Join Date: Jan 2009
Location: Sindh Pakistan
Posts: 8,878
Member: 953334
Status: Offline
Sonork: 100.1614005
Thanks Meter: 15,424
Smile Jaz Digit 4G Music Smart Reset Done With 2.38H Beta
Operation: Reset Settings/Format FS [ v2.38 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: SMART RESET
[+] Sensitive Data Backup
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN: MediaTek USB Port_V1632 (COM3)
MODE: BOOTROM
PORT: 3
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init BROM
BROM init passed
CHIP: MT6739 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0002 EVOL: 0x0000 HWC: 0x0699
CODE: Zion
TYPE: MODERN [RAPHAEL]

BROM: MEID: F9D66CC3FA98D23D64D80CAA0B022DAB
BROM: SecLevel: 0x00000000
BROM: SecMode : PLAIN
BROM: BROM|BL : 0x05|0xFE
BROM: BOOTROM
BROM: SOCID: 89A8BA78BB12B13D9EE6C32AE189D1B6C5E7479F7590153100 05B6ECDB68A81B
BROM: EMI: Search
BROM: EMI: Found
AGENT: 0_base : BASE_v2112 | Manual : Disabled
AGENT: Looking for suitable BootChain in DA...
AGENT: [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_A llInOne_DA.bin
AGENT: Found MT6739
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
BROM: DA sent
BROM: Transfer control to DA...
DA: AGENT started
DA: SYNC
DA: MODE: BROM
DA: EXT_RAM NOT initialized

EMI: FireFly preloader_fise6731_kaio_m.bin with 6 memory type(s) supported
EMI: Init EMI from INTERNAL DB
EMI: EXT_RAM CFG Passed

DA: BOOT to 2nd DA...
DA: 2ND stage confirmed
DA: SYNC with DA passed
DA: Receiving HW info

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x20000000 [ 512.00 MB ]

EMMC: CID: 90014A48344732611102250011C492FD
EMMC: VEN: Hynix : OEM: 74 : ID: 483447326111 : PRV: 0x02
EMMC: VEN: Hynix : H4G2a
EMMC: SNN: 620761540 ( 0x250011C4 ) MF: 9/2015

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0xE9000000 [ 3.64 GB ]

CHIP: MT6739 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x0699
CODE: Zion
TYPE: MODERN [RAPHAEL]
RNID: ACBC89C395E4897130B880E8D59E890A


DA: USB: HIGH-SPEED
Boot done (1)

Reading...
SmartInfo: AndroidVer: 6 UserDataFS: 0x01 CacheFS: 0x01

Verify device config...
Ok
Backup sensitive data [18] to C:\InfinityBox\CM2MT2\backup\MT6739__F9D66CC3FA98D 23D64D80CAA0B022DAB\
[21] Read: NVRAM
[8] Read: NVDATA
[14] Read: PROINFO
[22] Read: LK
[7] Read: NVCFG
[10] Read: PROTECT1
[1] Read: PGPT
[0] Read: PRELOADER
Done
Compact: C:\InfinityBox\CM2MT2\backup\MT6739__F9D66CC3FA98D 23D64D80CAA0B022DAB\
Cleanup...
Ok: 9
Verify C:\InfinityBox\CM2MT2\backup\MT6739__F9D66CC3FA98D 23D64D80CAA0B022DAB.zip
Verified
Ok
Steps: 6
RESET PROTECTION...
Format Ok: RESET PROTECTION
USERDATA...
Format Ok: USERDATA
CACHE...
Format Ok: CACHE
USERDATA...
Format Ok: USERDATA
Done: 00:01:12
Reconnect Power/Cable now
  Reply With Quote
The Following User Says Thank You to Akhtar Ali Jatt For This Useful Post:
Reply
Page 1 of 2 1 2

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 



All times are GMT +1. The time now is 00:51.

Contact Us - GSM-Forum - Archive - Top


Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.32560 seconds with 8 queries

SEO by vBSEO