Infinity Chinese Miracle-2 MTK/MediaTek v2.16 - Another step forward

[shakeelajmal]

Originally Posted by YellowBoss

Infinity Chinese Miracle-2 MTK/MediaTek v2.16 - Another step forward

As ordinary, unique functions and methods released

Core
Changed : Protocol updated ( Raphael/Legacy )
BugFix : MT6737M/MT6580
Changed : Internal EMI engine rebuild
!* LEGACY line : DB rebuild and updated, changed and optimized selection features
!* RAPAHEL line : DB rebuild from scratch. Selection feature rebuild. Manual mode removed and changed to automatic.
Summary :
!* Supported almost all existing memory/dram combinations up to current date for LEGACY lines
!* Supported almost all existing memory/dram combinations up to current date for RAPHAEL lines ( up to DIMENSITY line )
!* REMOVED manual EMI selection by bruteforce. NOT NEED ANYMORE set one-by-one internal EMI db counter and boot device every time. All auto.
!* In rare case of discrette DRAM may require change EMI once for some specific devices
!* After device learning ( via HW report feature ) it will be stored in SW Database and used automatic at every service/flash/repair operation
!* Overall : Not need seek compatible preloader files for new/not existing FW's devices, spend time to bruteforce and etc. Just connect and work!

Flasher
Changed : Core updated for LEGACY line
BugFix : MT6737 with Android 10 flashing revised
BugFix : Checksum verify rebuild
BugFix : Changed memory repartition model for modern scatter formats ( used in Android 10 FWs )
BugFix : Different scatter-version dependencies handled now correct
Changed : Core updated for RAPHAEL line
Changed : UltraFlash feature updated, new security workarounds supported

Service
Changed : Identify
!* Legacy platform changes, mostly for Android 10 devices
Changed : Smart Reset
!* Optimized support for different customized and generic cases

NewFeature : HW Report ( RAPHAEL - only )
!* Allow read extended info from device about its HW
- EXTCSD info ( complete, include eMMC version, all flags etc. ) - used in case of identification for HWrepair purposes
- CSD info ( complete, TEMP/PERM write protection status ) - used in case of identification ReadOnly state in some cases
- CID info ( FlashIC base info, name, vendor ) - default info, even if boot can nott be completed by some HW or SW reasons
- LifeInfo ( SLC, MLC, EOL status and use counters ) - allow understand how bad it feels
- RPMB info ( is it key programmed or clean and can be re-used )
!* Feature also allow automatic select and store for further use BOOTROM connection settings for RAPHAEL devices ( DRAM init )
!* HWreport not require complete boot in case of semi-dead devices. Useful for HWdebug
!* HWreport result may vary in diffirent models and agents, even on same SoC!

Firmware Reader
Changed : LEGACY line support updated ( Android 10 line )
Changed : Support more different types
Changed : FileSystem tools updated. Issues with reading on some systems should be fixed.
Changed : More wide range of scatter versions creation according device specific data

Other
BugFix : Lot of minor changes and fixes
Option : GUI ( File -> GUI ) : allow select other interface mode
!* Default - standard V2 line GUI
!* Wide - best for big screen / big distance to monitor
!* Wide Log - extend log window to screen size. Optimal for most cases

Info
!* Strongly recommend to use ONLY Infinity or Factory firmwares for modern Android 9/10 device to avoid lot of issues
- FOTA issues
- Attestation Key Issues
- Tee Key issues
- Security issues


Download link #1

Download link #2

Download link #3


How to upload files to support

Infinity-Box 15 years updates and support as nobody else since year 2005

does this require any activation ? i bought infinity dongle year ago and this is my first update since then and after installing program say you have old firmware but dongle manager says your dongle firmware needs no update as it is latest

[rashidj]

Infinity Team ad new cpu type mtk g70 ad next update

[sabersabir]

need qlc update

[JayDi]

Originally Posted by rashidj

Infinity Team ad new cpu type mtk g70 ad next update

It already supported few versions ago.

[hezekiamalilana]

good update,more fire cm2

[sadamsoft]

good update thank you

[scorpian1982]

Originally Posted by YellowBoss

Yes, we always suggest to users renew support only when they really need it.

and that's point make Infinity team Best because all other brands boxes leave work when support expire but in Infinity you can still use your dongle with last version of software and renew it when you need it. Best team in GSM world.

[Master-ZizO]

Full Respect to this programmer ... <3

[Z_Felix]

Operation : HW Report [ v2.16 ]
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM6)
MODE : BOOTROM
PORT : 6
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : MEID : 505A5CA1777D40B9CC5CA47B3FF45283
BROM : SecLevel : 0x00000001
BROM : SecMode : SBC
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2028 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : PRELOADER_INFINITY_0
EMI : CNT : 0002
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00038000 [ 224,00 KB ]
DRAM: 0xC0000000 [ 3,00 GB ]

EMMC: 150100525831424D4207FE5ECE21633D
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RX1BMB
EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0x747C00000 [ 29,12 GB ]

CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 8E05717E9DCC1CF2F6C1F7515EACF7A1

DA : USB : FULL-SPEED
DA : USB : Change Port Speed
PTFN : MediaTek DA USB VCOM (Android) (COM9)
MODE : PRELOADER PORT
PORT : 9

Boot done!

Memory Info :
CID : 150100525831424D4207FE5ECE21633D
MEM : VEN : SAMSUNG | OEM : 01 | DEV : RX1BMB
DAT : Size: 29820 MB, Max.Speed: 52000 kHz, blklen(512), nblks(61071360), ro(0)

EXT_CSD Info :
EXT_CSD rev. : v1.8 ( MMC v5.1 )
CSD struct rev. : v1.2
Supported command sets : 1h
HPI features : 1h
BG operations support : 1h
BG operations status : 0h
Correct prg. sectors : 0h
1st init time after part. : 3000 ms
Min. write perf.(DDR,52MH,8b): 0h
Min. read perf. (DDR,52MH,8b): 0h
TRIM timeout: 0 ms
Secure feature support: 55h
Secure erase timeout : 8100 ms
Secure trim timeout : 5100 ms
Access size : 3584 bytes
HC erase unit size : 512 kbytes
HC erase timeout : 300 ms
HC write prot grp size: 8192 kbytes
HC erase grp def. : 0h
Reliable write sect count: 1h
Sleep current (VCC) : 7h
Sleep current (VCCQ): 7h
Sleep/awake timeout : 26214400 ns
Sector count : 3a3e000h
Min. WR Perf. (52MH,8b): 0h
Min. Read Perf.(52MH,8b): 0h
Min. WR Perf. (26MH,8b,52MH,4b): 0h
Min. Read Perf.(26MH,8b,52MH,4b): 0h
Min. WR Perf. (26MH,4b): 0h
Min. Read Perf.(26MH,4b): 0h
Power class: 0
Power class(DDR,52MH,3.6V): 0h
Power class(DDR,52MH,1.9V): 0h
Power class(26MH,3.6V) : 0h
Power class(52MH,3.6V) : 0h
Power class(26MH,1.9V) : 0h
Power class(52MH,1.9V) : 0h
Part. switch timing : 1h
Out-of-INTR busy timing: 5h
Card type : 57h
Command set : 0h
Command set rev.: 0h
HS timing : 0h
Bus width : 0h
Erase memory content : 0h
Partition config : 48h
Boot partition size : 4096 kbytes
Boot information : 7h
Boot config protection: 0h
Boot bus width : 0h
Boot area write prot : 0h
User area write prot : 0h
FW configuration : 0h
RPMB size : 4096 kbytes
Write rel. setting : 1fh
Write rel. parameter: 14h
Start background ops : 0h
Enable background ops: 0h
H/W reset function : 1h
HPI management : 0h
Max. enhanced area size : 747h (15261696 kbytes)
Part. support : 7h
Part. attribute: 0h
Part. setting : 0h
General purpose 1 size : 0h (0 kbytes)
General purpose 2 size : 0h (0 kbytes)
General purpose 3 size : 0h (0 kbytes)
General purpose 4 size : 0h (0 kbytes)
Enh. user area size : 0h (0 kbytes)
Enh. user area start: 0h
Bad block mgmt mode: 0h

Overall status :

MLC status : 0% - 10% used
SLC status : 0% - 10% used
EOL status : Normal ( Less than 80% reserved blocks used )


RPMB : RPMB KEY EXISTS! [State : NOT CLEAN : UNUSABLE]


Done!
Elapsed: 00:00:16

[mahfuzatelecom]

Yes! Very very good update.

[yuri_nieves]

Yes, you have to by the annual activation in order to update your dongle

[taposhmobile]

this update is very fantastic......

[YellowBoss]

Originally Posted by sabersabir

need qlc update

Thank you very much for your question about qlc in MTK thread !
Right now I have a lot of other urgent job but as soon as it will be finished I will try to make something as per your request.
Thank you once again !

[YellowBoss]

Originally Posted by shakeelajmal

does this require any activation ? i bought infinity dongle year ago and this is my first update since then and after installing program say you have old firmware but dongle manager says your dongle firmware needs no update as it is latest

CM2MT2 v2.16 require dongle firmware version 0145

Probably your dongle support period is expired.
How to check - https://www.infinity-box.com/doc/?r=17

If support is expired please contact to your seller and renew support for 1 or 2 years - https://www.infinity-box.com/buy/

[YellowBoss]

Originally Posted by mobileman2013

Card found : DD311855 , v0145
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.16

Load IDBase v729152 Ok!


Preloader [HW DEV] Info :
EMI : DEV : MT6752
EMI : SRC : preloader_h920bk_v1_g_spsj_s06s_iq.bin
EMI : CNT : 0003
EMI : [00] : DRAM : DDR3 : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 0 B ]
EMI : [01] : DRAM : DDR3 : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 2.00 GB ]
EMI : [02] : DRAM : DDR3 : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 2.00 GB ]

Operation : Write Flash [ v2.16 ]

Repartition : Enabled
Flash Verify : Disabled
Reg.Pre-Erase : Enabled
Verify HW/SW : Enabled
SData Backup : Disabled
Safe UserData : Disabled
Flash Format : Disabled

Files :12
[FL] : Set : preloader_h920bk_v1_g_spsj_s06s_iq.bin
[FL] : Set : lk.bin
[FL] : Set : boot.img
[FL] : Set : recovery.img
[FL] : Set : logo.bin
[FL] : Set : secro.img
[FL] : Set : trustzone.bin
[FL] : Set : trustzone.bin
[FL] : Set : teksunhw.bin
[FL] : Set : system.img
[FL] : Set : cache.img
[FL] : Set : userdata.img

[FL] : Total size : 0x4454356F [ 1.07 GB ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM1094)
MODE : PRELOADER PORT
PORT : 1094
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x01
BROM : PRELOADER PORT
MODE : 0_base : BASE_v2028 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6735
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...

BROM : 0x00000001 : DA SEND ERROR!
ERROR : BROM : DL MODE ERROR
INFO : PRELOADER Level : CORRECT DA required : PL/PL_CRYPTO/SWSEC

Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!

What is the problem with this phone ?