Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.11 - Unlock, Repair, New CPU - Page 4 - GSM-Forum

butt.cell · 02-13-2021, 06:49

can u tell me how to send u nvm plz help boxx

JayDi · 02-13-2021, 07:50

Quote:

Originally Posted by reydelinframund

I have a zte v10 vita with a permanent blocking problem, they modified the imei with another tool, could you help me?

Try make repair security with SP2. Enable server support option.

JayDi · 02-13-2021, 07:51

Quote:

Originally Posted by butt.cell

can u tell me how to send u nvm plz help boxx

Upload to mega.nz or other filesharing. Send me link in PM.

JayDi · 02-13-2021, 07:52

Quote:

Originally Posted by decodari

after this update software does not open without any error. any idea?

thanks!

Does fault.bin exists in SP2 folder?

JayDi · 02-13-2021, 07:53

Quote:

Originally Posted by gabbar7040

Operation : Repair Security [ v2.11 ]

BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : VDC_ZA_P731K30V1.0.0B10

NVMng : SecurityInfo
IMEI[1] : 8614860414xxxxx
IMEI[2] : 867400xxxxxxxxx
WIFIMAC : 000000000000
BT_MAC : 000000000000
SEC : SLS:2, SKS:0, SKV:4

New SecInfo :
IMEI[1] : 8614860616xxxxx

>>> Info : Signed device, security repair may lead to break device!

NVMng : Security data updated!

Done!
Elapsed: 00:00:39
while flash mode imei repair not done with this error

Operation : Repair Security [ v2.11 ]

BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : VDC_ZA_P731K30V1.0.0B10

NVMng : SecurityInfo
IMEI[1] : 861486041480905
IMEI[2] : 867400020316620
WIFIMAC : 000000000000
BT_MAC : 000000000000
SEC : SLS:2, SKS:0, SKV:4

New SecInfo :
IMEI[1] : 861486061680905

>>> Info : Signed device, security repair may lead to break device!

NVMng : Security data updated!

Done!
Elapsed: 00:00:39

software warn you about result, if you NOT use server support option ( Use server )

reydelinframund · 02-13-2021, 17:11

I already updated to the spd2 version but the option to repair security does not come out, could you tell me how to do thanks

reydelinframund · 02-13-2021, 18:45

decodari · 02-14-2021, 00:05

Quote:

Originally Posted by JayDi

Does fault.bin exists in SP2 folder?

No, no fault.bin.

Trimis de pe al meu SM-G935F folosind Tapatalk

reydelinframund · 02-14-2021, 02:41

Reconnect Power/Cable!

Operation : Repair Security [ v2.11 ]

BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : ZTE : ZTE Blade V10 Vita
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0004
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : Control transfered!

Boot Done!

NVMng : SecurityInfo
IMEI[1] : 868486048601472
IMEI[2] : 867400020316620
IMEI[3] : 867400020316638

SEC : SLS:2, SKS:0, SKV:0

New SecInfo :
IMEI[1] : 357998073717682

NVMng : Using server support

Connecting to server...
Connected
Init...
Init failed: Wrong input data

>>> Error : Operation fail!
>>> Check previous message for more info!

Reconnect Power/Cable!

JayDi · 02-14-2021, 11:55

Quote:

Originally Posted by reydelinframund

Code:

Reconnect Power/Cable!

Operation : Repair Security [ v2.11 ]

BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : ZTE : ZTE Blade V10 Vita
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : 0x0004
FDL :  EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : Control transfered!

Boot Done!

NVMng  : SecurityInfo 
IMEI[1] : 868486048601472
IMEI[2] : 867400020316620
IMEI[3] : 867400020316638

SEC : SLS:2, SKS:0, SKV:0


New SecInfo : 
IMEI[1] : 357998073717682

NVMng  : Using server support

Connecting to server...
Connected
Init...
Init failed: Wrong input data

>>>  Error : Operation fail!
>>>  Check previous message for more info!

Reconnect Power/Cable!

Make NV read in flash or diag mode and send me for check, please.

shooster · 02-14-2021, 13:20

Hello does This version flash RSA auth required devices?

Sent from my SM-G770F using Tapatalk

decodari · 02-14-2021, 17:15

Mr. JayDi can you help me pls? Software does not open, without any error and no fault.bin! Thanks!

Trimis de pe al meu SM-G935F folosind Tapatalk

transpirit · 02-14-2021, 20:47

Good Work Infinity Team Always Great Update Thanks Infinity Team

YellowBoss · 02-15-2021, 11:37

Quote:

Originally Posted by shooster

Hello does This version flash RSA auth required devices?

Sent from my SM-G770F using Tapatalk

Hello,

What is your device name ?

YellowBoss · 02-15-2021, 11:38

Quote:

Originally Posted by decodari

can you help me pls? Software does not open, without any error and no fault.bin! Thanks!

Trimis de pe al meu SM-G935F folosind Tapatalk

Hello,

Please follow the next steps - https://www.infinity-box.com/support/?r=100127

What is the result ?

02-13-2021, 06:49	#46 (permalink)
butt.cell Freak Poster Join Date: Mar 2015 Location: some way in da world Posts: 157 Member: 2360557 Status: Offline Thanks Meter: 29	hi can u tell me how to send u nvm plz help boxx

02-13-2021, 17:11	#51 (permalink)
reydelinframund Insane Poster Join Date: Jul 2012 Location: mexico Posts: 87 Member: 1786170 Status: Offline Thanks Meter: 30	I already updated to the spd2 version but the option to repair security does not come out, could you tell me how to do thanks

02-13-2021, 18:45	#52 (permalink)
reydelinframund Insane Poster Join Date: Jul 2012 Location: mexico Posts: 87 Member: 1786170 Status: Offline Thanks Meter: 30

02-14-2021, 02:41	#54 (permalink)
reydelinframund Insane Poster Join Date: Jul 2012 Location: mexico Posts: 87 Member: 1786170 Status: Offline Thanks Meter: 30	Reconnect Power/Cable! Operation : Repair Security [ v2.11 ] BootMode : FLASH 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion : SPRD3 Boot : INF : ZTE : ZTE Blade V10 Vita Sending Init Boot ... Boot sent! Kick FDL ... BootVersion : Spreadtrum Boot Block version 1.1 Protocol setup ... Port speed : 921600 Sending Flash Boot ... Boot sent! Kick FLASH FDL ... FDL : 0x0004 FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True FDL : Control transfered! Boot Done! NVMng : SecurityInfo IMEI[1] : 868486048601472 IMEI[2] : 867400020316620 IMEI[3] : 867400020316638 SEC : SLS:2, SKS:0, SKV:0 New SecInfo : IMEI[1] : 357998073717682 NVMng : Using server support Connecting to server... Connected Init... Init failed: Wrong input data >>> Error : Operation fail! >>> Check previous message for more info! Reconnect Power/Cable!

02-14-2021, 13:20	#56 (permalink)
shooster Freak Poster Join Date: May 2017 Location: Africa, Uganda Posts: 222 Member: 2721034 Status: Offline Thanks Meter: 50	Hello does This version flash RSA auth required devices? Sent from my SM-G770F using Tapatalk

02-14-2021, 17:15	#57 (permalink)
decodari No Life Poster Join Date: Mar 2014 Location: Romania Posts: 1,067 Member: 2157664 Status: Offline Thanks Meter: 43	Mr. JayDi can you help me pls? Software does not open, without any error and no fault.bin! Thanks! Trimis de pe al meu SM-G935F folosind Tapatalk

02-14-2021, 20:47	#58 (permalink)
transpirit No Life Poster Join Date: Jan 2009 Posts: 717 Member: 950964 Status: Offline Thanks Meter: 161	Good Work Infinity Team Always Great Update Thanks Infinity Team