GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box
Reload this Page Successfully unlocked/repaired phones by Infinity-Box
Register FAQDonate Forum Rules Root any Device ★iPhone Unlock★ ★ Direct Codes ★ Direct Unlock Source


Reply
Page 4199 of 5074 « First 31993699409941494189419641974198 4199 4200420142024209424942994699 Last »
 
LinkBack Thread Tools Display Modes
Old 04-18-2020, 12:44   #62971 (permalink)
Freak Poster
 
Join Date: Jul 2016
Location: ubauro Distik Ghotki
Posts: 241
Member: 2601587
Status: Offline
Thanks Meter: 201
Y15 vivo 1901 Hang on logo after format done with Cm2

  Reply With Quote
Old 04-18-2020, 12:51   #62972 (permalink)
Freak Poster
 
Join Date: Jul 2016
Location: ubauro Distik Ghotki
Posts: 241
Member: 2601587
Status: Offline
Thanks Meter: 201
Y15 vivo 1901 Hang on logo after format done with Cm2
  Reply With Quote
Old 04-18-2020, 12:58   #62973 (permalink)
Freak Poster
 
Join Date: Jul 2016
Location: ubauro Distik Ghotki
Posts: 241
Member: 2601587
Status: Offline
Thanks Meter: 201
Y15 vivo 1901 Hang on logo after format done with Cm2
  Reply With Quote
Old 04-18-2020, 15:06   #62974 (permalink)
No Life Poster
 
yuranc8's Avatar
 
Join Date: Feb 2017
Location: Quelimane Mz
Age: 26
Posts: 2,210
Member: 2680008
Status: Offline
Thanks Meter: 1,640
Donate money to this user
Thumbs up Movitel M9103 8.1.0 MT6739 SPunlock DONE
Code:
Operation : SP Unlock [ v2.09 ]
Mode : META

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM21)
MODE : BOOTROM
PORT : 21
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : BOOTROM
BROM : Configuring target for META

BROM : META configured!

INIT : META confirmed!

Boot done!

AP_CHIP : MT6739,S01
AP_SWVR : Movitel_M9103_1.0_201907080234
MD_CHIP : MT6739
MD_SWVR : TK_MD_BASIC_HW

IMEI[1] : 3546
ID0 : Lock : Locked! | MNC : 2816 | CNT : 5 | CODE : 12345678
ID1 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 56781234
ID2 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 11112222
ID3 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 33334444
ID4 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 55556666
ID5 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 77778888
ID6 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 99990000
IMEI[2] : 3546
ID0 : Lock : Locked! | MNC : 2816 | CNT : 5 | CODE : 12345678
ID1 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 56781234
ID2 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 11112222
ID3 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 33334444
ID4 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 55556666
ID5 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 77778888
ID6 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 99990000

Done!
Elapsed: 00:01:46
  Reply With Quote
The Following 5 Users Say Thank You to yuranc8 For This Useful Post:
Show/Hide list of the thanked
Old 04-18-2020, 22:55   #62975 (permalink)
No Life Poster
 
yuranc8's Avatar
 
Join Date: Feb 2017
Location: Quelimane Mz
Age: 26
Posts: 2,210
Member: 2680008
Status: Offline
Thanks Meter: 1,640
Donate money to this user
Talking Another One
Code:
Operation : SP Unlock [ v2.09 ]
Mode : META

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM3)
MODE : PRELOADER PORT
PORT : 3
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
INIT : META confirmed!

Boot done!

AP_CHIP : MT6739,S01
AP_SWVR : Movitel_M9103_1.0_201907080234
MD_CHIP : MT6739
MD_SWVR : TK_MD_BASIC_HW

IMEI[1] : 354
ID0 : Lock : Locked! | MNC : 2816 | CNT : 5 | CODE : 12345678
ID1 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 56781234
ID2 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 11112222
ID3 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 33334444
ID4 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 55556666
ID5 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 77778888
ID6 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 99990000
IMEI[2] : 35460
ID0 : Lock : Locked! | MNC : 2816 | CNT : 5 | CODE : 12345678
ID1 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 56781234
ID2 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 11112222
ID3 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 33334444
ID4 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 55556666
ID5 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 77778888
ID6 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 99990000

Done!
Elapsed: 00:02:41
  Reply With Quote
The Following 4 Users Say Thank You to yuranc8 For This Useful Post:
Show/Hide list of the thanked
Old 04-18-2020, 23:08   #62976 (permalink)
No Life Poster
 
yuranc8's Avatar
 
Join Date: Feb 2017
Location: Quelimane Mz
Age: 26
Posts: 2,210
Member: 2680008
Status: Offline
Thanks Meter: 1,640
Donate money to this user
Thumbs up itel A23S 8.1.0 sp9832e Flash Firmware Done
Code:
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.04

Load IDBase v1119 Ok!


Open : A23S-SU335-8.1-MZ-Voda-L-V013-20200320.pac
VER : BP_R1.0.0
LEN : 0x60EFA5C1
CPU : sp9832e_1h10
VER : A23S-SU335-8.1-MZ-Voda-L-V013-20200320

Reading package ... 
Read package finished!

Patch Level    : OPM2.171019.012
Display ID     : A23S-SU335-8.1-MZ-Voda-L-V013-20200320
Ver. Incmt     : MZ-Voda-L-V013-20200320
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2020-03-05
Build Time     : 1584707363
Product Model  : itel A23S
Product Brand  : Itel
Product Name   : SU335
Product Device : itel-A23S
Product Manfct : ITEL MOBILE LIMITED
Product Info   : itel A23S
Product Board  : sp9832e_1h10_32b
Board Platform : sp9832e

Operation : Flash Firmware [ v2.04 ]

Setting   : Update NVRAM : True
Setting   : Force NVRAM : True
Setting   : Update PMT   : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : PAC : A23S-SU335-8.1-MZ-Voda-L-V013-20200320.pac
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x21
PMTMng : Update PMT Ok!

NVRM  : sharkle_pubcp_customer_Smart_Phone_nvitem.bin
NVMng  : Load 0x2F
NVMng  : Init SRC
NVMng  : SecurityInfo 
IMEI[1] : 35
IMEI[2] : 355
IMEI[3] : 8674
WIFIMAC : FFFFFFFFFFFF
BT_MAC  : FFFFFFFFFFFF
NVMng  : Backup Ok , 0x000C61C8
NVMng  : Init DST
NVMng  : Rx29 : Wx28
NVMng  : NVM block updated!

CODE  : prodnv.img
ERASE : UBOOT
ERASE : UBOOT_LOG
UBOOT : u-boot-spl-16k-sign.bin
CODE  : SC9600_sharkle_pubcp_customer_Smart_Phone_modem.dat
CODE  : SharkLE_LTEA_DSP_evs_on.bin
CODE  : SHARKLE2_DM_DSP.bin
CODE  : sharkle_cm4.bin
CODE  : PM_sharkle_cm4.bin
CODE  : boot.img
CODE  : recovery.img
FSIMG  : system.img
FSIMG  : userdata.img
CODE  : logo.bmp
CODE  : logo.bmp
FSIMG  : cache.img
ERASE : L_RUNTIMENV1
ERASE : MISC
UBOOT : u-boot-sign.bin
FSIMG  : persist.img
CODE  : sharkle_pubcp_customer_Smart_Phone_deltanv.bin
CODE  : sml-sign.bin
FSIMG  : vendor.img
CODE  : tos-sign.bin
CODE  : gnssbdmodem.bin
CODE  : gnssmodem.bin
CODE  : vbmeta-sign.img
Flashing finished!
Reconnect Power/Cable!


Done!
Elapsed: 00:05:22
  Reply With Quote
The Following 4 Users Say Thank You to yuranc8 For This Useful Post:
Show/Hide list of the thanked
Old 04-19-2020, 07:17   #62977 (permalink)
No Life Poster
 
azhergoga007's Avatar
 
Join Date: Jan 2011
Location: lullipapi
Posts: 8,670
Member: 1489030
Status: Offline
Sonork: 100.1649409
Thanks Meter: 5,368
Oppo A37f QLM Pattren Reset Done With Lose Data With King Infinity CM2

Code:
Card found : A19EC787 , v0142
Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.16


Operation : Read PatternLock [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
ID_BLOCK_I : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 237A2C28
ID_BLOCK_L : BD473DD974E2EF1AC5BA5ABB84DF5777
ID_BLOCK_L : 512C923D3EA1099A3FFED3081A9583C8
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ] 
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Read Ok! Trying decrypt ... 
PatternLock sequence : 2569

Done!
Elapsed: 00:00:18

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to azhergoga007 For This Useful Post:
Old 04-19-2020, 09:53   #62978 (permalink)
No Life Poster
 
Akhtar Ali Jatt's Avatar
 
Join Date: Jan 2009
Location: Sindh Pakistan
Posts: 8,878
Member: 953334
Status: Offline
Sonork: 100.1614005
Thanks Meter: 15,424
Smile Nokia K18 Format Done
Operation : Read Flash [ v1.06 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 6531EFM v2.0 (c)2019
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Read Flash Ok, Size : 4.00 MiB

Platform Version: MOCOR_16A.W17.43.4_Release
Project Version: SC6531EFM_E23
MMI Version: SC6531EFM_E23_S007_V08_22122017_1954
BASE Version: BASE_SVN
HW Version: SC6531EFM_BAR
2017-12-22 19:54:31
LOG Version: V1.0.1
Saved to : C:\Users\AkhtarAli\Desktop\SC6531EFM_E23_S007_V08_ 22122017_1954.bin

Done!
Elapsed: 00:00:42

Reconnect Power/Cable!

Operation : Format FileSystem [ v1.06 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 6531EFM v2.0 (c)2019
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Make backup of sensetive data
Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_1D9 55FCE45EE_NVM.nv

Executing FormatFFS ...
Format FFS Done!

Done!
Elapsed: 00:00:20

Reconnect Power/Cable!
  Reply With Quote
Old 04-19-2020, 10:01   #62979 (permalink)
No Life Poster
 
Akhtar Ali Jatt's Avatar
 
Join Date: Jan 2009
Location: Sindh Pakistan
Posts: 8,878
Member: 953334
Status: Offline
Sonork: 100.1614005
Thanks Meter: 15,424
Smile Tecno B1F F.R.p Reset Done
Tecno B1F F.R.p Reset Done

Operation : Reset Settings/Format FS [ v2.09 ]
Mode : FRP [ RESET PROTECTION ]
  1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
  2. Insert USB cable in phone
Waiting for device connection ...

PTFN : PreLoader USB VCOM Port (COM216)
MODE : PRELOADER PORT
PORT : 216
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : PRELOADER PORT
MODE : TECNO : LB6 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_SWSEC.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 460001154D3236453CC903429B665707
DAInf: 4 : 2 : 156
DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

EMMC: 150100464536324D4203C93C757669B
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : FE62MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x3A3E00000 [ 14.56 GB ]

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x40000000 [ 1.00 GB ]

CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : B832CF6AAE569DE5DC73A2E723F5CFC8

STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Format Ok : RESET PROTECTION

Done!
Elapsed: 00:00:23

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to Akhtar Ali Jatt For This Useful Post:
Old 04-19-2020, 15:50   #62980 (permalink)
No Life Poster
 
Join Date: Apr 2011
Location: Pakistan
Posts: 934
Member: 1555233
Status: Offline
Thanks Meter: 2,192
Donate money to this user
King Infinity CM2 QMOBILE LT360 sp9850ka_1h10 FRP DONE
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9850x_BASE : SC9850_eMMC_1GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : OPM2.171019.012
Display ID : QMobileLT360_MP_25_09
Ver. Incmt : 20190925142137
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2019-08-05
Build Time : 1569392409
Product Model : LT360
Product Brand : QMobile
Product Name : LT360
Product Device : LT360
Product Manfct : QMobile
Product Info : LT360
Product Board : sp9850ka_1h10
Board Platform : sp9850ka

Update DataBase ...


Platform Version: MOCORTM_18A_RLS2_W18.24.4_P2_Debug
Project Version: sharkl2_pub
BASE Version: FM_BASE_18A_RLS2_W18.24.4_P2
HW Version: sc9850_modem
CMP_Time : 07-02-2018 12:51:09

MODEM TAG : MOCORTM_18A_RLS2_W18.24.4_P2_Debug_FM_BASE_18A_RLS 2_W18.24.4_P2_sc9850_modem_sharkl2_pub

UserData : STATE : PLAIN


Done!
Elapsed: 00:02:47

Operation : Format FS / Reset Settings [ v2.04 ]
Mode : Reset FRP
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9850x_BASE : SC9850_eMMC_1GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Wipe Ok : FRP

Reconnect Power/Cable!
  Reply With Quote
The Following 5 Users Say Thank You to amjadnona For This Useful Post:
Show/Hide list of the thanked
Old 04-20-2020, 09:41   #62981 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 5,796
Member: 2644066
Status: Offline
Thanks Meter: 1,773
Memobile l100 hang on logo done by cm2

Card found : 73CA70CC , v0137
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.04

SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]


SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ]

Operation : Identify [ v1.04 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 6531EFM v1.1 (c)2019
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

IMEI[1] :
IMEI[2] :

Done!
Elapsed: 00:00:25

Reconnect Power/Cable!

Operation : Format FileSystem [ v1.04 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 6531EFM v1.1 (c)2019
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Make backup of sensetive data
Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_1E8 569AAFE1D_NVM.nv

Executing FormatFFS ...
Format FFS Done!

Done!
Elapsed: 00:00:18

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to A.G.Shahid For This Useful Post:
Old 04-20-2020, 09:45   #62982 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 5,796
Member: 2644066
Status: Offline
Thanks Meter: 1,773
Qmobile s2 hang on logo done by cm2

Card found : S/N : 73CA70CC , v0137
Chinese Miracle II [MTK module] v 1.58

Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 11 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483847316505075D834500B28F
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A483847316505075D834500B28F
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0x0B9C44DED8622FCF4569204CEA3C2555
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear FRP ( Google Reset Protection )
Clear Ok!
Clear DIN
Clear Ok!
Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:00:52
Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to A.G.Shahid For This Useful Post:
Old 04-20-2020, 09:49   #62983 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 5,796
Member: 2644066
Status: Offline
Thanks Meter: 1,773
Tecno s1 hang on logo dnoe by cm2

Card found : S/N : 73CA70CC , v0137
Chinese Miracle II [MTK module] v 1.58

Scatter Load Ok , BaseBand : MT6580 , Project : mtk_android , Storage : EMMC
Files found : 8 , Set to Flash : 7
Ready to Flash!

Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 25 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 7001004548384344340119851D13B465
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , 4DC8H
[eMMC] : FLASH_CID : 7001004548384344340119851D13B465
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001C8000000
[eMMC] : FLASH_UCP : 7296 MiB [eMMC 8 GiB]
DEV RID : 0xB9E2EB77A22EBBA2C4A57DAF1600E962
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6580 , Project : mtk_android , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!

BL : BatteryLevel : 4003 mV
BL : BatteryLevel Ok

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000000380000-0x0000000000500000
Erase : 0x0000000001C80000-0x00000001C5300000
Flash Pre-Erase Done, time used : 00:00:01

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ...
Use : preloader.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : 0014
Update PMT by user request
Repartition Done!
Use FLN Mode

Processing : Flash Write
Flash now : LK
Image Flash Ok
Flash now : BOOT
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : SECRO
Image Flash Ok
Flash now : SYSTEM
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash Write Done, time used : 00:06:51

Processing : Verify
Verify Passed : LK
Verify Passed : BOOT
Verify Passed : RECOVERY
Verify Passed : LOGO
Verify Passed : SECRO
Verify Passed : SYSTEM
Verify Passed : CACHE
Data Verify Done, time used : 00:00:06

Update Mirror PMT
Update Done!

Update RomInfo done

Done!
Elapsed: 00:07:21
Reconnect Power/Cable!
  Reply With Quote
The Following 4 Users Say Thank You to A.G.Shahid For This Useful Post:
Show/Hide list of the thanked
Old 04-20-2020, 09:51   #62984 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 5,796
Member: 2644066
Status: Offline
Thanks Meter: 1,773
Oppo a37 reset pattern done by cm2

Card found : 73CA70CC , v0137
Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.16


Operation : Identify [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 2687E70E
ID_BLOCK_L : 9B6D07FF5EC4F1FCAB80705D9AE17159
ID_BLOCK_L : 42319F2E23B21CA92C8BCC050FE6F0DB
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!


Brand : OPPO
ProdName : A37f
ProdModel : A37f
Device : A37f
AndroidVer: 5.1.1
SWVersion : A37fEX_11.A.28_INT_028_201710081545
Manufact. : OPPO
SysPatch : LMY47V
DevComTime: 10/8/2017 9:26:49 AM
QLMxCPU : MSM8916

USERData : NORMAL
GCSec : EMPTY

Done!
Elapsed: 00:00:16

Reconnect Power/Cable!

Operation : Reset Settings [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 2687E70E
ID_BLOCK_L : 9B6D07FF5EC4F1FCAB80705D9AE17159
ID_BLOCK_L : 42319F2E23B21CA92C8BCC050FE6F0DB
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Format USER ...
Format CACHE ...
Format Ok!
Remove FRP
Reset Ok!

Done!
Elapsed: 00:00:19

Reconnect Power/Cable!
  Reply With Quote
The Following 2 Users Say Thank You to A.G.Shahid For This Useful Post:
Old 04-20-2020, 09:52   #62985 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 5,796
Member: 2644066
Status: Offline
Thanks Meter: 1,773
Nokia 3310 reset password done by cm2

Card found : 73CA70CC , v0137
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.04

SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]


Operation : Reset Settings [ v1.04 ]
----- > Powered On :
1. Power On device
2. Connect USB cable
3. When device show StorageMode : Press '0' button for a 5 second!
----- > Powered Off :
1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!

Wait for device ...

Device Connected!
BOOT_PWR0 : 0x00600000
BOOT_INIT : 0x81C0024C
BOOT_MODE : DOWNLOAD
BOOT_INTV : 6533G-FPTRUNK-W16.44.2
InternalVersion: g8bec5c4c
Setting BOOTROM mode
BOOT_MODE : BOOTROM
Boot_CPU : 0x08090007 : [SPREADTRUM] : SC6533G
MEMD for flsh_spi32m Branch: none
Boot_CS0 : 0x00000000 : SPI : [SPIDEF] : 25Q32 : 0x00400000 [ 4MiB ]
Performing MemoryInit
Selecting RL
Sending RL
Config : MemoryInit
Config : Loader
BOOT_MODE : RLOADER
Boot IV : 0xFBA2A250
Boot done!

Preparing PMT
Verifying PMT
Erasing 1474560 bytes

FileSystem format done!


Done!
Elapsed: 00:01:06

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to A.G.Shahid For This Useful Post:
Reply
Page 4199 of 5074 « First 31993699409941494189419641974198 4199 4200420142024209424942994699 Last »

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Unlocking 5190 Ryu Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 23 01-07-2018 17:14
news headlines to gsm phone mos Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 7 05-22-2016 11:42
my 8810 is phone locked ,can somebody please help duyphuc Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 18 12-23-2014 09:03
need software for 5161 by cable mln2000 Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 6 08-29-2010 20:17

 



All times are GMT +1. The time now is 09:56.

Contact Us - GSM-Forum - Archive - Top


Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.79988 seconds with 10 queries

SEO by vBSEO