7610 contact retailer - GSM-Forum

--==Dixon==-- · 10-19-2004, 17:08

Hi i have 1 x 7610 contact retailer ,i tryed to full flash it MCU+ppm but same
made format AREA ,but than when pwoer on only NOKIA and phone freeze ,
i made full earse than full flash ,than simlocks ,than defaults but 2 viariant.
1. Contact retailer OR 2. nOKIA and freeze .
any idea to solve it ?

ray_5572 · 10-21-2004, 07:06

u try to erase flash 1st then reflash mcu&ppm after falshing complete try to format user area

--==Dixon==-- · 10-22-2004, 12:16

Quote:

Originally Posted by ray_5572

u try to erase flash 1st then reflash mcu&ppm after falshing complete try to format user area

done. when power on show NOKIA and freeze ,
whats problem ? maybe try to change UEM ?
i cant image any ways -)

ray_5572 · 10-24-2004, 15:17

just format user area then it will be done

kazak_gsm · 10-25-2004, 12:11

dear frind
if u using tornado do this few steps with me i tested it many times and alwayes succeed .
first check then choose the mcu and ppm
pres flash buton when the program finished erasing stop the prociss
you'll find 4 addreses maybe 5 copy them and past in new txt ok

using eras flash option
adjust start addres here u'll take the end no of the first addres ok
adjust end addres here u'll take the 1st no of the 2nd addres ok
and contenu this way till u reach the last addres
then flash again then format then write pm then unlock and ur phone'll work great .

exampl:
if the 1st addres is 00000000-0000ffff
and the second wher 00010000-000efff
u'll choose 0000ffff in adjust start addres
and 00010000 in the end addres and etc for all of the rest

tray and poast resault pleas

cskok2003 · 11-02-2004, 19:14

Quote:

Originally Posted by ray_5572

just format user area then it will be done

hi,ray_5572 r u sure????????

cskok2003

tony84 · 11-03-2004, 16:28

maybe u can try to "Set full factory default" after format user area......

johnny_liang · 11-03-2004, 16:57

why so confused to solve that??, I always repair software fault "Contact retailer" without using flasher or computer JUST REFORMAT YOUR PHONE BY PRESSING YES+3+* then POWER ON YOUR PHONE REMEMBER DO NOT RELEASE BUTTON UNTIL YOU SEE "FORMATING" MESSAGE

e64y · 11-03-2004, 18:02

I agree with johnny liang,I never tick full factory defaults while flashing 7610,after flash just use the key to format or set full factory defaults.

PS:U can release the button while u see 'formating' message...if not ur finger will be very painful.

johnny_liang · 11-04-2004, 18:06

ups you right i forget to write when u see "formatting" you may release button, haha... wat a big joke

GSM SHADOW · 11-04-2004, 18:23

once i have the same problem and i erase flash then flash phone and format it but don't set factroy

excelpass · 11-05-2004, 11:50

i tryed pressing the button untill it show formating but stay there for so long .

alternatif · 11-05-2004, 15:23

just formating your phone like 6600 call -3 -* and on off

excelpass · 11-06-2004, 02:54

@alternatif ( just formating your phone like 6600 call -3 -* and on off ) i know as i say i tryed pressing the button untill it show formating but stay there for so long .show (formatting) no resposne

mattinhbo · 11-07-2004, 04:51

Try flash again, after flash done you must "Set full factory defaults" then "format user area" All done! kkk

10-19-2004, 17:08	#1 (permalink)
--==Dixon==-- Freak Poster Join Date: Jul 2002 Location: Europe Age: 48 Posts: 354 Member: 14037 Status: Offline Thanks Meter: 1	7610 contact retailer Hi i have 1 x 7610 contact retailer ,i tryed to full flash it MCU+ppm but same made format AREA ,but than when pwoer on only NOKIA and phone freeze , i made full earse than full flash ,than simlocks ,than defaults but 2 viariant. 1. Contact retailer OR 2. nOKIA and freeze . any idea to solve it ?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
urgent 7610 contact retailer after flashing	lazioroma	WD2 & APE (Symbian Phones)	17	12-19-2005 10:08
7610 Contact Retailler	reez	WD2 & APE (Symbian Phones)	5	03-23-2005 10:28
7610 contact retailer	--==Dixon==--	WD2 & APE (Symbian Phones)	11	02-27-2005 23:06
7610 contact retailer	shairanifo	UFS2 + UFS3-Tornadoflasher	5	02-16-2005 13:17
Help 7610 contact retailer	alif30	Griffin	2	07-14-2004 16:53

10-21-2004, 07:06	#2 (permalink)
ray_5572 Freak Poster Join Date: Oct 2004 Age: 41 Posts: 198 Member: 85689 Status: Offline Thanks Meter: 5	u try to erase flash 1st then reflash mcu&ppm after falshing complete try to format user area

10-24-2004, 15:17	#4 (permalink)
ray_5572 Freak Poster Join Date: Oct 2004 Age: 41 Posts: 198 Member: 85689 Status: Offline Thanks Meter: 5	just format user area then it will be done

10-25-2004, 12:11	#5 (permalink)
kazak_gsm Junior Member Join Date: Aug 2004 Age: 44 Posts: 27 Member: 78939 Status: Offline Thanks Meter: 0	dear frind if u using tornado do this few steps with me i tested it many times and alwayes succeed . first check then choose the mcu and ppm pres flash buton when the program finished erasing stop the prociss you'll find 4 addreses maybe 5 copy them and past in new txt ok using eras flash option adjust start addres here u'll take the end no of the first addres ok adjust end addres here u'll take the 1st no of the 2nd addres ok and contenu this way till u reach the last addres then flash again then format then write pm then unlock and ur phone'll work great . exampl: if the 1st addres is 00000000-0000ffff and the second wher 00010000-000efff u'll choose 0000ffff in adjust start addres and 00010000 in the end addres and etc for all of the rest tray and poast resault pleas

11-03-2004, 16:28	#7 (permalink)
tony84 Freak Poster Join Date: Jul 2004 Age: 39 Posts: 135 Member: 75763 Status: Offline Thanks Meter: 5	maybe u can try to "Set full factory default" after format user area......

11-03-2004, 16:57	#8 (permalink)
johnny_liang No Life Poster Join Date: Mar 2003 Location: Nowhere Age: 44 Posts: 636 Member: 25067 Status: Offline Thanks Meter: 81	why so confused to solve that??, I always repair software fault "Contact retailer" without using flasher or computer JUST REFORMAT YOUR PHONE BY PRESSING YES+3+* then POWER ON YOUR PHONE REMEMBER DO NOT RELEASE BUTTON UNTIL YOU SEE "FORMATING" MESSAGE

11-03-2004, 18:02	#9 (permalink)
e64y No Life Poster Join Date: Jun 2003 Location: Twin Towers Age: 36 Posts: 627 Member: 30582 Status: Offline Thanks Meter: 1	I agree with johnny liang,I never tick full factory defaults while flashing 7610,after flash just use the key to format or set full factory defaults. PS:U can release the button while u see 'formating' message...if not ur finger will be very painful.

11-04-2004, 18:06	#10 (permalink)
johnny_liang No Life Poster Join Date: Mar 2003 Location: Nowhere Age: 44 Posts: 636 Member: 25067 Status: Offline Thanks Meter: 81	ups you right i forget to write when u see "formatting" you may release button, haha... wat a big joke

11-04-2004, 18:23	#11 (permalink)
GSM SHADOW No Life Poster Join Date: Mar 2004 Location: EGYPT Posts: 636 Member: 57430 Status: Offline Thanks Meter: 6	once i have the same problem and i erase flash then flash phone and format it but don't set factroy

11-05-2004, 11:50	#12 (permalink)
excelpass Freak Poster Join Date: Dec 2003 Age: 52 Posts: 488 Member: 47532 Status: Offline Thanks Meter: 18	i tryed pressing the button untill it show formating but stay there for so long .

11-05-2004, 15:23	#13 (permalink)
alternatif Insane Poster Join Date: Jul 2004 Age: 48 Posts: 71 Member: 73925 Status: Offline Thanks Meter: 11	just formating your phone like 6600 call -3 -* and on off

11-06-2004, 02:54	#14 (permalink)
excelpass Freak Poster Join Date: Dec 2003 Age: 52 Posts: 488 Member: 47532 Status: Offline Thanks Meter: 18	@alternatif ( just formating your phone like 6600 call -3 -* and on off ) i know as i say i tryed pressing the button untill it show formating but stay there for so long .show (formatting) no resposne

11-07-2004, 04:51	#15 (permalink)
mattinhbo Junior Member Join Date: Aug 2004 Age: 43 Posts: 3 Member: 76485 Status: Offline Thanks Meter: 0	Try flash again, after flash done you must "Set full factory defaults" then "format user area" All done! kkk