Final Guide For Tp Unlock Lg U8180/u8330 !!! - GSM-Forum

**.:hack3r2k:.** · 06-10-2005, 12:28

SAME OPERATIONS FOR BOTH RED AND BROWN.

1. Download latest setup from support.
2. Go to 'LG3G 2k's Flasher' and select from models 'U8180 TP' or 'U8330 TP'.
3. Select on flash space all files from 8138 v100(for U8180) or 8130 v101 (for U8330) from support area.
4. Start flashing operation and when required connect to GND testpoint and after on request disconnect it.
5. Wait flashin process to finish. Power ON/OFF phone.
6. Go to 'LG 3G' tab and select from models 'U8180 TP'/'U8330 TP' and wait codes to be read.
7. Disconnect phone. Remove TP. Power on phone with SIM INSIDE. Type 2945#*88110# and enter unlock code. Restart phone and enjoy.

BELLOW ARE FINAL TP IMAGES ATTACHED !!!!

P.S: Thx Morfeus.

ziko · 06-10-2005, 12:52

Should we use serial resistor (220 Ohm)for safety ?

Ziko

**.:hack3r2k:.** · 06-10-2005, 12:54

If possible yes. Better avoid any troubles.

Br

GALAXY*gsm · 06-11-2005, 17:49

Reallt this is a clear pic than else
may it will help many people.......

thanx
B.R
MR/Galaxy

telemoveis · 06-11-2005, 19:15

don't work

Press Power On shortly !
Phone Detected !
Chip ID: 71000301
Loading ...
Loader version:
40318 1450 LLECXC1325413_CERTLOADER R3J
Error ... !

italianbox.net · 06-12-2005, 00:30

Quote:

Originally Posted by telemoveis

don't work

Press Power On shortly !
Phone Detected !
Chip ID: 71000301
Loading ...
Loader version:
40318 1450 LLECXC1325413_CERTLOADER R3J
Error ... !

Man is very simply for the profesional unlocker !!!!!!!

ciom · 06-12-2005, 01:08

plz lissen all member read this befor posting

the error really found its not big job to do test point or to connect with furious or

vygis but in sum model give this error

i do this many time and secess with vygys and firous but in sum model not accept

and give this error here in forum need to give solution and help not to repeat

always (simply for the profesional unlocker ) and plz chek test point

ok i check test point and and and but always sum problem

( Rem i have 8180 but in pcb is ( 8120 xxx) and flash ship when test point is 8180)

in this cas the problem existe
Loader version:
40318 1450 LLECXC1325413_CERTLOADER R3J
Error ... !

but when u seccess ( if in the pcb is 8180 and in flash ship is 8180 all is good and

phone unlocked and secess

all pcb marked for exemple with 8180 and flash ship is 8180 all pass ok and good

all pcb marked for exemple with 8120 and flash ship is 8180 problem not sloved and

give this error

Loader version:
40318 1450 LLECXC1325413_CERTLOADER R3J
Error ... !

**.:hack3r2k:.** · 06-12-2005, 01:11

Man you do something wrong. You have many places for tp. Just try them all.

Br

ciom · 06-12-2005, 01:18

ok thx thx this is 1 good idea ( but all test point no problem when check it )

thx for you reply i respect all member give new idea

lianghx · 06-12-2005, 04:00

U8180 chang to chinese (V1.02A) can not unlock,help me!!

PROCELL · 06-13-2005, 14:29

plz i need help about tp damaged for 8180!!!
i have 8180 without tp (damaged with solder)...

.:AnOuaR:. · 06-13-2005, 15:36

I can repair this test dawns

.:Morpheus:. · 06-13-2005, 20:13

Quote:

Originally Posted by LUXCELL

plz i need help about tp damaged for 8180!!!
i have 8180 without tp (damaged with solder)...

u can Contact me via icq i think i can help you.

Thanks before

Furious.

telemoveis · 06-14-2005, 13:24

hi
always with furious
Press Power On shortly !
Phone Detected !
Chip ID: 71000301
Loading ...
Loader version:
40318 1450 LLECXC1325413_CERTLOADER R3J
Error ... !

8330 only 8380 working

.:Morpheus:. · 06-14-2005, 19:01

U8330

Use U8330 TP posted by hack3r2k
* telemoveis just you need to connect TP with GND Frist and Click flash

1-Power on phone
2-soft ask u to connect TP ( Click Just ok d'ont disconnected TP )
3-soft ask u to disconnected TP ( disconnected TP and click ok )
4-Enjoy. Phone Flashed.

Furious.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
U8380, U8360 - FLASH/UNLOCK , and U8180 , U8330 unlock without conversion	Gobi	VygisToolbox	46	11-30-2007 18:23
LG U8180, U8330 - How to Unlock/Repair	Gobi	VygisToolbox	36	07-27-2006 20:27
Lg 8180/8330 Fools Guide For Direct Unlock Withou Tp !!!	.:hack3r2k:.	FuriouS II	23	07-23-2005 14:33
For Booting LG U8180 - U8330, connect the Testpoint THRU A RESITOR to the GND	Gobi	VygisToolbox	0	06-08-2005 06:48

06-10-2005, 12:52	#2 (permalink)
ziko No Life Poster Join Date: Oct 2002 Location: Here Age: 60 Posts: 648 Member: 16916 Status: Offline Thanks Meter: 3	Should we use serial resistor (220 Ohm)for safety ? Ziko

06-10-2005, 12:54	#3 (permalink)
.:hack3r2k:. Product Manager Join Date: Aug 2002 Location: FuriouSTeaM Posts: 53,979 Member: 15022 Status: Offline Sonork: 100.53452 Thanks Meter: 61,568	If possible yes. Better avoid any troubles. Br

06-11-2005, 17:49	#4 (permalink)
GALAXYgsm No Life Poster Join Date: Oct 2002 Location: Alex,EGYPT. Age: 51 Posts: 915 Member: 16449 Status: Offline* Thanks Meter: 39	Reallt this is a clear pic than else may it will help many people....... thanx B.R MR/Galaxy

06-11-2005, 19:15	#5 (permalink)
telemoveis Freak Poster Join Date: Sep 2004 Age: 56 Posts: 153 Member: 83577 Status: Offline Thanks Meter: 11	don't work Press Power On shortly ! Phone Detected ! Chip ID: 71000301 Loading ... Loader version: 40318 1450 LLECXC1325413_CERTLOADER R3J Error ... !

06-12-2005, 01:08	#7 (permalink)
ciom Freak Poster Join Date: Mar 2005 Posts: 215 Member: 128018 Status: Offline Thanks Meter: 17	plz lissen all member read this befor posting the error really found its not big job to do test point or to connect with furious or vygis but in sum model give this error i do this many time and secess with vygys and firous but in sum model not accept and give this error here in forum need to give solution and help not to repeat always (simply for the profesional unlocker ) and plz chek test point ok i check test point and and and but always sum problem ( Rem i have 8180 but in pcb is ( 8120 xxx) and flash ship when test point is 8180) in this cas the problem existe Loader version: 40318 1450 LLECXC1325413_CERTLOADER R3J Error ... ! but when u seccess ( if in the pcb is 8180 and in flash ship is 8180 all is good and phone unlocked and secess all pcb marked for exemple with 8180 and flash ship is 8180 all pass ok and good all pcb marked for exemple with 8120 and flash ship is 8180 problem not sloved and give this error Loader version: 40318 1450 LLECXC1325413_CERTLOADER R3J Error ... !

06-12-2005, 01:11	#8 (permalink)
.:hack3r2k:. Product Manager Join Date: Aug 2002 Location: FuriouSTeaM Posts: 53,979 Member: 15022 Status: Offline Sonork: 100.53452 Thanks Meter: 61,568	Man you do something wrong. You have many places for tp. Just try them all. Br

06-12-2005, 01:18	#9 (permalink)
ciom Freak Poster Join Date: Mar 2005 Posts: 215 Member: 128018 Status: Offline Thanks Meter: 17	ok thx thx this is 1 good idea ( but all test point no problem when check it ) thx for you reply i respect all member give new idea

06-12-2005, 04:00	#10 (permalink)
lianghx Insane Poster Join Date: Dec 2004 Location: MX-KEY is the BEST NOKIA TOOL Age: 45 Posts: 66 Member: 96632 Status: Offline Thanks Meter: 0	U8180 chang to chinese (V1.02A) can not unlock,help me!!

06-13-2005, 14:29	#11 (permalink)
PROCELL Freak Poster Join Date: Jan 2005 Location: Tunisia Posts: 259 Member: 108232 Status: Offline Thanks Meter: 21	plz i need help about tp damaged for 8180!!! i have 8180 without tp (damaged with solder)...

06-13-2005, 15:36	#12 (permalink)
.:AnOuaR:. No Life Poster Join Date: Apr 2004 Location: london, united kingdom Age: 42 Posts: 518 Member: 62602 Status: Offline Thanks Meter: 6	I can repair this test dawns

06-14-2005, 13:24	#14 (permalink)
telemoveis Freak Poster Join Date: Sep 2004 Age: 56 Posts: 153 Member: 83577 Status: Offline Thanks Meter: 11	hi always with furious Press Power On shortly ! Phone Detected ! Chip ID: 71000301 Loading ... Loader version: 40318 1450 LLECXC1325413_CERTLOADER R3J Error ... ! 8330 only 8380 working

06-14-2005, 19:01	#15 (permalink)
.:Morpheus:. No Life Poster Join Date: Dec 2003 Location: United Kingdom, ENGLAND Posts: 1,141 Member: 47774 Status: Offline Thanks Meter: 185	U8330 Use U8330 TP posted by hack3r2k * telemoveis just you need to connect TP with GND Frist and Click flash 1-Power on phone 2-soft ask u to connect TP ( Click Just ok d'ont disconnected TP ) 3-soft ask u to disconnected TP ( disconnected TP and click ok ) 4-Enjoy. Phone Flashed. Furious.