GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > No More Supported Solutions (Dead Products) > No More Supported H/W Products > Cyclonebox

 
 
LinkBack Thread Tools Display Modes
Old 07-16-2012, 22:01   #2746 (permalink)
No Life Poster
 
dapx's Avatar
 
Join Date: Jun 2009
Location: Paraguay
Posts: 776
Member: 1064967
Status: Offline
Thanks Meter: 131
Unlock X3 RM-540 Done!


Full Work in SL3 Remote Service LOL
Code:
MCU Version	V 08.54
MCU Date	25-10-10
Product		RM-540 (Nokia X3)
Manufacturer	(c) Nokia            
IMEI		353401043
Mastercode	7127207011
IMEI Spare	3A35040134828605
IMEI SV		3335040134828655F8000000
PPM		V 08.54, 25-10-10, RM-540, (c) Nokia            , C
CNT		Content: c_0581134, V 08.54, 25-10-10, RM-540, (c) Nokia            
PSN		GAL305825
Product Code	0595835
Module Code	0204201
Basic Product Code	0578316
PSD		0000000000000000
LPSN		0
RETU		40
TAHVO		00
AHNE		41
HW		4000
RFIC		0800
DSP		ICPR91_10w11_2
LCD		SEIKO
Simlock Server	SIMLOCK SERVER
Simlock Key	7223100000000000
Simlock Profile	8000000000000000
Simlock Key Cnt	0
Simlock FBUS Cnt	0
Simlock [1,1]	State: CLOSED	Type: 7FFF6F07FFFFFFFF @ FC00	Data: 722310
Simlock [2,1]	State: CLOSED	Type: MCC-MNC	Data: 74810F
Simlock [3,1]	State: CLOSED	Type: MCC-MNC	Data: 74402F
Sending BB5 NCK Code...
NCK[7] - ACCEPTED
MCU Version	V 08.54
MCU Date	25-10-10
Product		RM-540 (Nokia X3)
Manufacturer	(c) Nokia            
IMEI		353401043
Mastercode	7127207011
IMEI Spare	3A35040134828605
IMEI SV		3335040134828655F8000000
PPM		V 08.54, 25-10-10, RM-540, (c) Nokia            , C
CNT		Content: c_0581134, V 08.54, 25-10-10, RM-540, (c) Nokia            
PSN		GAL305825
Product Code	0595835
Module Code	0204201
Basic Product Code	0578316
PSD		0000000000000000
LPSN		0
RETU		40
TAHVO		00
AHNE		41
HW		4000
RFIC		0800
DSP		ICPR91_10w11_2
LCD		SEIKO
Simlock Server	SIMLOCK SERVER
Simlock Key	7223100000000000
Simlock Profile	8000000000000000
Simlock Key Cnt	0
Simlock FBUS Cnt	0
Simlock [1,1]	State: OPENED	Type: 7FFF6F07FFFFFFFF @ FC00	Data: 722310
Simlock [2,1]	State: OPENED	Type: MCC-MNC	Data: 74810F
Simlock [3,1]	State: OPENED	Type: MCC-MNC	Data: 74402F
Simlock NCK	#pw+8K9}84113354703+7#
 
Old 07-18-2012, 11:35   #2747 (permalink)
No Life Poster
 
Nadoui's Avatar
 
Join Date: Jan 2010
Location: Paris
Age: 48
Posts: 3,137
Member: 1202782
Status: Offline
Sonork: 100.1608261
Thanks Meter: 634
Donate money to this user
Code:
MCU Version	V 10.40
MCU Date	27-04-10
Product		RM-578 (Nokia 2730 classic)
Manufacturer	(c) Nokia            
IMEI		353396048317163
Mastercode	6256635423
IMEI Spare	3A35930684131706
IMEI SV		3335930684131756F8000000
PPM		V 10.40, 27-04-10, RM-578, (c) Nokia            , AE
CNT		Content: SFR FR, V 10.40, 27-04-10, RM-578, (c) Nokia            , , 
PSN		2BB2ED5AI
Product Code	0591366
Module Code	0204764
Basic Product Code	059C5X3
PSD		0000000000000000
LPSN		0
RETU		16
TAHVO		22
AHNE		30
HW		3011
RFIC		17141716
DSP		ICPR72_10w01_Tommy
LCD		SEIKO
BT		2.31-SP2.26
Simlock Server	SIMLOCK SERVER
Simlock Key	2081000000000000
Simlock Profile	8000000000000000
Simlock Key Cnt	0
Simlock FBUS Cnt	0
Simlock [1,1]	State: CLOSED	Type: MCC-MNC	Data: 20810F
Simlock [2,1]	State: CLOSED	Type: MCC-MNC	Data: 64710F
Auto Selecting Flash Files on User Request...
Product Code: 0591366
Scanning avaiable products...
Processing C:\Program Files\Nokia\Phoenix\Products\...
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\...
Found 0 products, Filtering DCT4 Products - wait...
0 Products left after filtering. Ready.
Scanning avaiable products...
Processing C:\Program Files\Nokia\Phoenix\Products\...
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\...
Found 0 products, Filtering BB5 Products - wait...
0 Products left after filtering. Ready.
No Flash Datapackage installed for this Phone!
Reading SL3 LOG File...
MCU Version	V 10.40
MCU Date	27-04-10
Product		RM-578 (Nokia 2730 classic)
Manufacturer	(c) Nokia            
IMEI		353396048317163
Mastercode	6256635423
Analyzing Profile Bits...
Phone can be NCK unlocked using KEYPAD
Phone can be NCK unlocked using FBUS
15 Digits NCK Found
WARNING: "12100111AB63015629C553BB44C7F0932B3D1D78.C000699C" Not Exists, Will read it...
Reading CYC file from phone...
Booting CMT...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006030C192101023000
CMT_EM_ASIC_ID:		00000296
CMT_EM_ASIC_ID:		00000B22
CMT_PUBLIC_ID:		12100111AB63015629C553BB44C7F0932B3D1D78
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC:	273F6D55
CMT_SECURE_ROM_CRC:	DFAAF68F
CMT Ready!
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
Old Loader Detected
Readed OK, Saving to "12100111AB63015629C553BB44C7F0932B3D1D78.C000699C"
Success!

Last edited by ptt; 07-18-2012 at 23:00. Reason: ADD [CODE] [/CODE] TAG TO THE LOG
 
Old 07-19-2012, 13:56   #2748 (permalink)
Freak Poster
 
Join Date: Oct 2005
Location: TUNISIA
Posts: 234
Member: 190067
Status: Offline
Thanks Meter: 68
C7 Unlock Done

Code:
]oclHashCat Format Detected
COD File Seems to be Valid, Calculating...
Codes for IMEI: 353755046250868
#pw+807042801159447+1#
#pw+277213566259673+2#
#pw+901410554797779+3#
#pw+286164224447824+4#
#pw+421368275555362+5#
#pw+600553519208299+6#
#pw+085840763282819+7#

[Nokia C7-00 USB Phonet]: Port opened OK!
MCU Version    V 92PS1_10w36.2
MCU Date    14-09-10
Product        RM-675 (Nokia C7-00)
Manufacturer    (c) Nokia
IMEI        353755046250868
Mastercode    665452641
IMEI Spare    3A35570564528006
IMEI SV        3335570564528006F2000000
PPM        256qLGHCI Version 12 (rev. 64). LMP Version 36 (rev. 64). Manufacturer 1928.n256i012.003j0)012.003.00.01012.003.01.01012.003.237.03u!Žkrm675_ENO_v_0.0308¥012.003.237.03
PSN        CKO667922
Product Code    059D7G2
Module Code    0204505
Basic Product Code    0591401
PSD        0000000000000000
LPSN        0
WLAN MAC    C8DF7C31892E
APE SW        012.003
APE Variant    012.003.00.01012.003.01.01012.003.237.03
APE Test        rm675_ENO_v_0.0308
APE HW        256
APE ADSP    256
APE BT        HCI Version 12 (rev. 64). LMP Version 36 (rev. 64). Manufacturer 1928.
RETU        40
TAHVO        00
AHNE        11
HW        6003o256qLGHCI Version 12 (rev. 64). LMP Version 36 (rev. 64). Manufacturer 1928.n256i012.003j0)012.003.00.01012.003.01.01012.003.237.03u!Žkrm675_ENO_v_0.0308¥012.003.237.03
PCI        o256qLGHCI Version 12 (rev. 64). LMP Version 36 (rev. 64). Manufacturer 1928.n256i012.003j0)012.003.00.01012.003.01.01012.003.237.03u!Žkrm675_ENO_v_0.0308¥012.003.237.03
UEM        256qLGHCI Version 12 (rev. 64). LMP Version 36 (rev. 64). Manufacturer 1928.n256i012.003j0)012.003.00.01012.003.01.01012.003.237.03u!Žkrm675_ENO_v_0.0308¥012.003.237.03
UPP        256qLGHCI Version 12 (rev. 64). LMP Version 36 (rev. 64). Manufacturer 1928.n256i012.003j0)012.003.00.01012.003.01.01012.003.237.03u!Žkrm675_ENO_v_0.0308¥012.003.237.03
RFIC        |Alli_4.3.4
DSP        TB92PS1_10w36
LCD        256qLGHCI Version 12 (rev. 64). LMP Version 36 (rev. 64). Manufacturer 1928.n256i012.003j0)012.003.00.01012.003.01.01012.003.237.03u!Žkrm675_ENO_v_0.0308¥012.003.237.03
BT        256qLGHCI Version 12 (rev. 64). LMP Version 36 (rev. 64). Manufacturer 1928.n256i012.003j0)012.003.00.01012.003.01.01012.003.237.03u!Žkrm675_ENO_v_0.0308¥012.003.237.03
ADSP Sw        256qLGHCI Version 12 (rev. 64). LMP Version 36 (rev. 64). Manufacturer 1928.n256i012.003j0)012.003.00.01012.003.01.01012.003.237.03u!Žkrm675_ENO_v_0.0308¥012.003.237.03
ADSP DevID        256qLGHCI Version 12 (rev. 64). LMP Version 36 (rev. 64). Manufacturer 1928.n256i012.003j0)012.003.00.01012.003.01.01012.003.237.03u!Žkrm675_ENO_v_0.0308¥012.003.237.03
ADSP RevID        256qLGHCI Version 12 (rev. 64). LMP Version 36 (rev. 64). Manufacturer 1928.n256i012.003j0)012.003.00.01012.003.01.01012.003.237.03u!Žkrm675_ENO_v_0.0308¥012.003.237.03
AEM        256qLGHCI Version 12 (rev. 64). LMP Version 36 (rev. 64). Manufacturer 1928.n256i012.003j0)012.003.00.01012.003.01.01012.003.237.03u!Žkrm675_ENO_v_0.0308¥012.003.237.03
Flip MCUSW        256qLGHCI Version 12 (rev. 64). LMP Version 36 (rev. 64). Manufacturer 1928.n256i012.003j0)012.003.00.01012.003.01.01012.003.237.03u!Žkrm675_ENO_v_0.0308¥012.003.237.03
Simlock Server    SIMLOCK SERVER
Simlock Key    2341000000000000
Simlock Profile    0000000000000000
Simlock Key Cnt    0
Simlock FBUS Cnt    0
Simlock [1,1]    State: CLOSED    Type: MCC-MNC    Data: 23410F
Simlock [2,1]    State: CLOSED    Type: MCC-MNC    Data: 23410F
---------------------------------------------
[Nokia C7-00 USB Phonet]: Port opened OK!
MCU Version    V 92PS1_10w36.2
MCU Date    14-09-10
Product        RM-675 (Nokia C7-00)
Manufacturer    (c) Nokia
IMEI        353755046250868
Mastercode    665452641
IMEI Spare    3A35570564528006
IMEI SV        3335570564528006F2000000
PPM        256qLGHCI Version 12 (rev. 64). LMP Version 36 (rev. 64). Manufacturer 1928.n256i012.003j0)012.003.00.01012.003.01.01012.003.237.03u!Žkrm675_ENO_v_0.0308¥012.003.237.03
PSN        CKO667922
Product Code    059D7G2
Module Code    0204505
Basic Product Code    0591401
PSD        0000000000000000
LPSN        0
WLAN MAC    C8DF7C31892E
APE SW        012.003
APE Variant    012.003.00.01012.003.01.01012.003.237.03
APE Test        rm675_ENO_v_0.0308
APE HW        256
APE ADSP    256
APE BT        HCI Version 12 (rev. 64). LMP Version 36 (rev. 64). Manufacturer 1928.
RETU        40
TAHVO        00
AHNE        11
HW        6003o256qLGHCI Version 12 (rev. 64). LMP Version 36 (rev. 64). Manufacturer 1928.n256i012.003j0)012.003.00.01012.003.01.01012.003.237.03u!Žkrm675_ENO_v_0.0308¥012.003.237.03
PCI        o256qLGHCI Version 12 (rev. 64). LMP Version 36 (rev. 64). Manufacturer 1928.n256i012.003j0)012.003.00.01012.003.01.01012.003.237.03u!Žkrm675_ENO_v_0.0308¥012.003.237.03
UEM        256qLGHCI Version 12 (rev. 64). LMP Version 36 (rev. 64). Manufacturer 1928.n256i012.003j0)012.003.00.01012.003.01.01012.003.237.03u!Žkrm675_ENO_v_0.0308¥012.003.237.03
UPP        256qLGHCI Version 12 (rev. 64). LMP Version 36 (rev. 64). Manufacturer 1928.n256i012.003j0)012.003.00.01012.003.01.01012.003.237.03u!Žkrm675_ENO_v_0.0308¥012.003.237.03
RFIC        |Alli_4.3.4
DSP        TB92PS1_10w36o256qLGHCI Version 12 (rev. 64). LMP Version 36 (rev. 64). Manufacturer 1928.n256i012.003j0)012.003.00.01012.003.01.01012.003.237.03u!Žkrm675_ENO_v_0.0308¥012.003.237.03
LCD        256qLGHCI Version 12 (rev. 64). LMP Version 36 (rev. 64). Manufacturer 1928.n256i012.003j0)012.003.00.01012.003.01.01012.003.237.03u!Žkrm675_ENO_v_0.0308¥012.003.237.03
BT        256qLGHCI Version 12 (rev. 64). LMP Version 36 (rev. 64). Manufacturer 1928.n256i012.003j0)012.003.00.01012.003.01.01012.003.237.03u!Žkrm675_ENO_v_0.0308¥012.003.237.03
ADSP Sw        256qLGHCI Version 12 (rev. 64). LMP Version 36 (rev. 64). Manufacturer 1928.n256i012.003j0)012.003.00.01012.003.01.01012.003.237.03u!Žkrm675_ENO_v_0.0308¥012.003.237.03
ADSP DevID        256qLGHCI Version 12 (rev. 64). LMP Version 36 (rev. 64). Manufacturer 1928.n256i012.003j0)012.003.00.01012.003.01.01012.003.237.03u!Žkrm675_ENO_v_0.0308¥012.003.237.03
ADSP RevID        256qLGHCI Version 12 (rev. 64). LMP Version 36 (rev. 64). Manufacturer 1928.n256i012.003j0)012.003.00.01012.003.01.01012.003.237.03u!Žkrm675_ENO_v_0.0308¥012.003.237.03
AEM        256qLGHCI Version 12 (rev. 64). LMP Version 36 (rev. 64). Manufacturer 1928.n256i012.003j0)012.003.00.01012.003.01.01012.003.237.03u!Žkrm675_ENO_v_0.0308¥012.003.237.03
Flip MCUSW        256qLGHCI Version 12 (rev. 64). LMP Version 36 (rev. 64). Manufacturer 1928.n256i012.003j0)012.003.00.01012.003.01.01012.003.237.03u!Žkrm675_ENO_v_0.0308¥012.003.237.03
Simlock Server    SIMLOCK SERVER
Simlock Key    2341000000000000
Simlock Profile    0000000000000000
Simlock Key Cnt    0
Simlock FBUS Cnt    0
Simlock [1,1]    State: OPENED    Type: MCC-MNC    Data: 23410F
Simlock [2,1]    State: OPENED    Type: MCC-MNC    Data: 23410F
Simlock NCK    #pw+0’q’40763282819+7#

Last edited by ptt; 07-20-2012 at 21:59. Reason: ADD [CODE] [/CODE] TAG TO THE LOG
 
Old 07-19-2012, 15:15   #2749 (permalink)
No Life Poster
 
.::Gsm-Play::.'s Avatar
 
Join Date: Jul 2011
Location: Great India
Posts: 1,637
Member: 1615596
Status: Offline
Sonork: 100.160704?
Thanks Meter: 763
Thumbs up 2730 Flashing done.

Code:
Establishing Connection with Box in Main Mode...
Handling device: [Cyclone Team], [Cyclone Bootloader], [Platform: Classic]
Handling device: [Cyclone Team], [Cyclone Box], [Platform: Classic]
Initializing box...
Box Firmware: Cyclone Main Application v02.04, (Jun 10 2012 18:37:57, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2012
Hardware Platform: Cyclone Reloaded Flasher Interface (c) 2012 KarwosLabs
Box Serial Number: B0000xxx
HW Revision: D, Suitable for: Production, Case: Reloaded Box Casing, MCU Manufacture Time: 2012, wk01 / 2011, wk27
Box is activated
Started box selftests procedure
USB Voltage 5.02v PASSED
MCU Voltage 3.28v PASSED
Core Voltage 1.80v PASSED
VBAT Voltage 1.25v PASSED
VBAT Voltage 4.99v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
Internal Box VPP Enabled
VPP Voltage 5.01v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
All box selftests passed!
Super DCT4 Activation: TRUE
XGold/Blackberry Service Running, Counter: 100
Avaiable Physical Memory: 1.411GB
Avaiable Virtual Memory: 1.895GB
Avaiable Pagefile: 3.235GB
Initializing FBUS...
All initialized - Ready to work
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101023000
CMT_EM_ASIC_ID:  00000296
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  1DC0000CA84A015637E17A116A9EE42FDEFE5818
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.42.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
FlashContent[0,CMT]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
Warning: PAPUBKEYS Hash Missing!
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
Scanning avaiable products...
Processing C:\Program Files\Nokia\Phoenix\Products\...
Found 60 products, Filtering BB5 Products - wait...
30 Products left after filtering. Ready.
Retrieving Variants for Product RM-578 - wait...
189 Variants Retrieved
Processing pre flash tasks...
Backing up RPL...
RPL Creation started...
Processing CMT Part...
Warning: Phone not detected, using Rap Public ID in FileName and reading Certificates Only
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101023000
CMT_EM_ASIC_ID:  00000296
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  1DC0000CA84A015637E17A116A9EE42FDEFE5818
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.42.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
FlashContent[0,CMT]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
Warning: PAPUBKEYS Hash Missing!
APE Subsystem Not Found
Flashbus Write baud set to 5.0Mbits
CMT NPC Not Found
CMT CCC Not Found
CMT HWC Not Found
CMT VARIANT Not Found
CMT PARTNERC Not Found
Restarting MCU...
RPL Saved OK
RPL backup thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm578__10.45.mcusw (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101023000
CMT_EM_ASIC_ID:  00000296
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  1DC0000CA84A015637E17A116A9EE42FDEFE5818
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
rm578__10.45.mcusw, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.42.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
FlashContent[0,CMT]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
Warning: PAPUBKEYS Hash Missing!
Flashbus Write baud set to 5.0Mbits
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x00000000-0x000006BF, NOR
EraseArea[0,CMT]: 0x000006C0-0x0001FFFF, NOR
EraseArea[0,CMT]: 0x00040000-0x000BFFFF, NOR
EraseArea[0,CMT]: 0x000C0000-0x0013FFFF, NOR
EraseArea[0,CMT]: 0x00140000-0x0155FFFF, NOR
EraseArea[0,CMT]: 0x01560000-0x0175FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 91.313s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
WARNING: CMT PAPUBKEYS Hash is Empty, writing first found PAPUBKEYS
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 55.750s
Flashing Speed: 3257.74 kBit/S
Restarting MCU...
Processing rm578__10.45.mcusw (APE)...
Processing rm578__10.45.ppm_af (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101023000
CMT_EM_ASIC_ID:  00000296
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  1DC0000CA84A015637E17A116A9EE42FDEFE5818
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
rm578__10.45.ppm_af, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.42.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 8669C77551AE1280331BBAE6FD0C7CB3D3F44CC1
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x01760000-0x01FFFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 22.860s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 12.297s
Flashing Speed: 3587.74 kBit/S
Restarting MCU...
Processing rm578__10.45.ppm_af (APE)...
Processing rm578__10.45.image_af_black (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101023000
CMT_EM_ASIC_ID:  00000296
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  1DC0000CA84A015637E17A116A9EE42FDEFE5818
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
rm578__10.45.image_af_black, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.42.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 8669C77551AE1280331BBAE6FD0C7CB3D3F44CC1
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x02000000-0x0245FFFF, NOR
EraseArea[0,CMT]: 0x02460000-0x03FBFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 182.797s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 31.750s
Flashing Speed: 3637.13 kBit/S
Restarting MCU...
Processing rm578__10.45.image_af_black (APE)...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Reading info...
MCU Version V 10.45
MCU Date 05-07-10
Product  RM-578 (Nokia 2730 classic)
Manufacturer (c) Nokia            
IMEI  353396047360644
Mastercode 342752611
IMEI Spare 3A35930674636004
IMEI SV  3335930674636064F0000000
PPM  V 10.45, 05-07-10, RM-578, (c) Nokia            , AF
CNT  Content: af_black, V 10.45, 05-07-10, RM-578, (c) Nokia            , 
PSN  25177C9AI
Product Code 0585334
Module Code 0204764
Basic Product Code 059C5X3
PSD  0000000000000000
LPSN  0
RETU  16
TAHVO  22
AHNE  30
HW  3011
RFIC  17141716
DSP  ICPR72_10w01_Tommy
LCD  SEIKO
BT  2.31-SP2.26
Simlock Server SIMLOCK SERVER
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!
 
Old 07-19-2012, 15:16   #2750 (permalink)
No Life Poster
 
.::Gsm-Play::.'s Avatar
 
Join Date: Jul 2011
Location: Great India
Posts: 1,637
Member: 1615596
Status: Offline
Sonork: 100.160704?
Thanks Meter: 763
Thumbs up 5130 Flashing done

Code:
Establishing Connection with Box in Main Mode...
Handling device: [Cyclone Team], [Cyclone Box], [Platform: Classic]
Initializing box...
Box Firmware: Cyclone Main Application v02.04, (Jun 10 2012 18:37:57, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2012
Hardware Platform: Cyclone Reloaded Flasher Interface (c) 2012 KarwosLabs
Box Serial Number: B0000xxx
HW Revision: D, Suitable for: Production, Case: Reloaded Box Casing, MCU Manufacture Time: 2012, wk01 / 2011, wk27
Box is activated
Started box selftests procedure
USB Voltage 5.02v PASSED
MCU Voltage 3.28v PASSED
Core Voltage 1.80v PASSED
VBAT Voltage 1.32v PASSED
VBAT Voltage 4.93v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
Internal Box VPP Enabled
VPP Voltage 4.97v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
All box selftests passed!
Super DCT4 Activation: TRUE
XGold/Blackberry Service Running, Counter: 100
Avaiable Physical Memory: 1.156GB
Avaiable Virtual Memory: 1.895GB
Avaiable Pagefile: 2.688GB
Initializing FBUS...
All initialized - Ready to work
MCU Version V 07.97
MCU Date 13-09-10
Product  RM-495 (Nokia 5130 XpressMusic)
Manufacturer (c) Nokia            
IMEI  352450052283729
Mastercode 1153341012
IMEI Spare 3A25540025827302
IMEI SV  3325540025827352F8000000
PPM  V 07.97, 13-09-10, RM-495, (c) Nokia            , MEN
CNT  Content: mena_a1_bd_red, V 07.97, 13-09-10, RM-495, (c) Nokia            
PSN  8E660ABAH
Product Code 0586824
Module Code 0204024
Basic Product Code 0578151
PSD  0000000000000000
LPSN  0
RETU  16
TAHVO  22
AHNE  30
HW  1005
RFIC  06540601
DSP  ICPR72_10w01
LCD  SEIKO
Simlock Server SIMLOCK SERVER
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Auto Selecting Flash Files on User Request...
Product Code: 0586824
Scanning avaiable products...
Processing C:\Program Files\Nokia\Phoenix\Products\...
Found 49 products, Filtering DCT4 Products - wait...
2 Products left after filtering. Ready.
This is Valid BB5 Product
No variant found with given Product Code, selecting first one
Processing pre flash tasks...
Backing up RPL...
RPL Creation started...
Processing CMT Part...
Storing Product Code...
Storing PSN...
Storing HWID...
Trying to store Simlock...
Reading Configuration Key...
Hashing...
Reading SHA1-RSA Signature...
Reading SHA1-HMAC Signature...
Storing Simlock...
Trying to store WMDRM RPL...
Reading Keys...
Storing WMDRM PD...
Reading Security Block...
Security block OK and saved to "RM-495_352450052283729_6302012_31520 PM.SecurityBlock.PM"
WARNING: "07C0010819E10F56451A95B700ECB24DBA0ED687.B0000474" Not Exists, Will read it...
Reading CYC file from phone...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000
CMT_EM_ASIC_ID:  00000296
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  07C0010819E10F56451A95B700ECB24DBA0ED687
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
Old Loader Detected
Readed OK, Saving to "07C0010819E10F56451A95B700ECB24DBA0ED687.B0000474"
Storing Additional Data...
Checking Superdongle Key...
Encrypting Superdongle Key...
Storing Superdongle Key...
Checking CMLA Key...
Storing CMLA Key...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000
CMT_EM_ASIC_ID:  00000296
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  07C0010819E10F56451A95B700ECB24DBA0ED687
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.42.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0C917F11196FDB7378C18EF7260698CA4489DCA0
APE Subsystem Not Found
Flashbus Write baud set to 5.0Mbits
Storing NPC...
Storing CCC...
Storing HWC...
CMT VARIANT Not Found
CMT PARTNERC Not Found
Restarting MCU...
RPL Saved OK
RPL backup thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm495__07.97.mcusw (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000
CMT_EM_ASIC_ID:  00000296
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  07C0010819E10F56451A95B700ECB24DBA0ED687
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
rm495__07.97.mcusw, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.42.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0C917F11196FDB7378C18EF7260698CA4489DCA0
Flashbus Write baud set to 5.0Mbits
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x00000000-0x000006BF, NOR
EraseArea[0,CMT]: 0x000006C0-0x0001FFFF, NOR
EraseArea[0,CMT]: 0x00040000-0x000BFFFF, NOR
EraseArea[0,CMT]: 0x000C0000-0x0013FFFF, NOR
EraseArea[0,CMT]: 0x00140000-0x0137FFFF, NOR
EraseArea[0,CMT]: 0x01380000-0x0151FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 117.407s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 62.187s
Flashing Speed: 2454.64 kBit/S
Restarting MCU...
Processing rm495__07.97.mcusw (APE)...
Processing rm495__07.97.ppm_mena_a1 (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000
CMT_EM_ASIC_ID:  00000296
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  07C0010819E10F56451A95B700ECB24DBA0ED687
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
rm495__07.97.ppm_mena_a1, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.42.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0C917F11196FDB7378C18EF7260698CA4489DCA0
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x01520000-0x01DBFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 39.47s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 15.218s
Flashing Speed: 3343.38 kBit/S
Restarting MCU...
Processing rm495__07.97.ppm_mena_a1 (APE)...
Processing rm495__07.97.image_mena_a1_red (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000
CMT_EM_ASIC_ID:  00000296
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  07C0010819E10F56451A95B700ECB24DBA0ED687
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
rm495__07.97.image_mena_a1_red, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.42.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0C917F11196FDB7378C18EF7260698CA4489DCA0
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x01DC0000-0x0215FFFF, NOR
EraseArea[0,CMT]: 0x02160000-0x03FBFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 226.593s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 25.172s
Flashing Speed: 3419.86 kBit/S
Restarting MCU...
Processing rm495__07.97.image_mena_a1_red (APE)...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Reading info...
MCU Version V 07.97
MCU Date 13-09-10
Product  RM-495 (Nokia 5130 XpressMusic)
Manufacturer (c) Nokia            
IMEI  352450052283729
Mastercode 1153341012
IMEI Spare 3A25540025827302
IMEI SV  3325540025827352F8000000
PPM  V 07.97, 13-09-10, RM-495, (c) Nokia            , MEN
CNT  Content: mena_a1_bd_red, V 07.97, 13-09-10, RM-495, (c) Nokia            
PSN  8E660ABAH
Product Code 0586824
Module Code 0204024
Basic Product Code 0578151
PSD  0000000000000000
LPSN  0
RETU  16
TAHVO  22
AHNE  30
HW  1005
RFIC  06540601
DSP  ICPR72_10w01
LCD  SEIKO
Failed to read info -> Failed to read SP info
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!
 
Old 07-19-2012, 15:17   #2751 (permalink)
No Life Poster
 
.::Gsm-Play::.'s Avatar
 
Join Date: Jul 2011
Location: Great India
Posts: 1,637
Member: 1615596
Status: Offline
Sonork: 100.160704?
Thanks Meter: 763
Thumbs up E63 Flashing done.

Code:
Establishing Connection with Box in Main Mode...
Handling device: [Cyclone Team], [Cyclone Bootloader], [Platform: Classic]
Handling device: [Cyclone Team], [Cyclone Box], [Platform: Classic]
Initializing box...
Box Firmware: Cyclone Main Application v02.04, (Jun 10 2012 18:37:57, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2012
Hardware Platform: Cyclone Reloaded Flasher Interface (c) 2012 KarwosLabs
Box Serial Number: B000xxxx
HW Revision: D, Suitable for: Production, Case: Reloaded Box Casing, MCU Manufacture Time: 2012, wk01 / 2011, wk27
Box is activated
Started box selftests procedure
USB Voltage 4.94v PASSED
MCU Voltage 3.28v PASSED
Core Voltage 1.80v PASSED
VBAT Voltage 1.31v PASSED
VBAT Voltage 4.95v PASSED
Box VPP disabled
VPP Voltage 0.02v PASSED
Internal Box VPP Enabled
VPP Voltage 4.97v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
All box selftests passed!
Super DCT4 Activation: TRUE
XGold/Blackberry Service Running, Counter: 100
Avaiable Physical Memory: 1.220GB
Avaiable Virtual Memory: 1.895GB
Avaiable Pagefile: 2.853GB
Initializing FBUS...
All initialized - Ready to work
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051103
CMT_EM_ASIC_ID:  00000296
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  107001089D7C1152B661E16F197ECE3B6A60C521
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: C70CB07324056BC66A824347F40DB2D5
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.12.8.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.12.8.0, Algo: XSR 1.5
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: D9C25399C696B8549EDCDB1497A950B3A20DDFB6
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
Scanning avaiable products...
Processing C:\Program Files\Nokia\Phoenix\Products\...
Found 49 products, Filtering BB5 Products - wait...
21 Products left after filtering. Ready.
Retrieving Variants for Product RM-437 - wait...
93 Variants Retrieved
Processing pre flash tasks...
Backing up RPL...
RPL Creation started...
Processing CMT Part...
Warning: Phone not detected, using Rap Public ID in FileName and reading Certificates Only
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051103
CMT_EM_ASIC_ID:  00000296
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  107001089D7C1152B661E16F197ECE3B6A60C521
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: C70CB07324056BC66A824347F40DB2D5
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.12.8.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.12.8.0, Algo: XSR 1.5
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: D9C25399C696B8549EDCDB1497A950B3A20DDFB6
APE Subsystem Not Found
Flashbus Write baud set to 5.0Mbits
Storing NPC...
Storing CCC...
Storing HWC...
CMT VARIANT Not Found
CMT PARTNERC Not Found
Restarting MCU...
RPL Saved OK
RPL backup thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm437_510.21.010_prd.c00 (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051103
CMT_EM_ASIC_ID:  00000296
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  107001089D7C1152B661E16F197ECE3B6A60C521
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: C70CB07324056BC66A824347F40DB2D5
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
rm437_510.21.010_prd.c00, Type: Flash Image, Algo: BB5, XSR 1.5
Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.12.8.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.12.8.0, Algo: XSR 1.5
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: D9C25399C696B8549EDCDB1497A950B3A20DDFB6
Flashbus Write baud set to 5.0Mbits
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00040000-0x007FFFFF, ONENAND
EraseArea[0,CMT]: 0x00A00000-0x0759FFFF, ONENAND
EraseArea[0,CMT]: 0x0F1C0000-0x0F8BFFFF, ONENAND
Erase Partition (CMT)
Erase Partition (CMT)
Erase Partition (CMT)
Waiting 320s for erasure finish...
Erase taken 0.656s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT ADA Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT RAP3NAND Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT SOS*UPDAPP Certificate...
Writing CMT SOS*DSP0 Certificate...
Writing CMT SOS*ISASW Certificate...
Writing CMT SOS*CORE Certificate...
Writing CMT SOS+ROFS Certificate...
Programming Status OK!
All blocks written OK! Time taken 83.312s
Flashing Speed: 6386.59 kBit/S
Restarting MCU...
Processing rm437_510.21.010_prd.c00 (APE)...
Processing rm437_510.21.010_prd.v20 (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051103
CMT_EM_ASIC_ID:  00000296
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  107001089D7C1152B661E16F197ECE3B6A60C521
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: C70CB07324056BC66A824347F40DB2D5
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
rm437_510.21.010_prd.v20, Type: Flash Image, Algo: BB5, XSR 1.5
Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.12.8.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.12.8.0, Algo: XSR 1.5
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: D9C25399C696B8549EDCDB1497A950B3A20DDFB6
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x05420000-0x0759FFFF, ONENAND
Erase Partition (CMT)
Waiting 320s for erasure finish...
Erase taken 0.234s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT SOS+ROFX Certificate...
Programming Status OK!
All blocks written OK! Time taken 32.703s
Flashing Speed: 6205.53 kBit/S
Restarting MCU...
Processing rm437_510.21.010_prd.v20 (APE)...
Processing rm437_510.21.010.34U (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051103
CMT_EM_ASIC_ID:  00000296
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  107001089D7C1152B661E16F197ECE3B6A60C521
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: C70CB07324056BC66A824347F40DB2D5
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
rm437_510.21.010.34U, Type: Flash Image, Algo: BB5, XSR 1.5
Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.12.8.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.12.8.0, Algo: XSR 1.5
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: D9C25399C696B8549EDCDB1497A950B3A20DDFB6
Flashbus Write baud set to 5.0Mbits
Started group flash erase
Erase Partition (CMT)
Waiting 320s for erasure finish...
Erase taken 1.62s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 23.891s
Flashing Speed: 6133.57 kBit/S
Restarting MCU...
Processing rm437_510.21.010.34U (APE)...
Processing sofie_erase_y_drive.fpsx (CMT)...
Processing sofie_erase_y_drive.fpsx (APE)...
Processing RM437_ENO_008.07.45_100.71.952.a018.fpsx (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051103
CMT_EM_ASIC_ID:  00000296
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  107001089D7C1152B661E16F197ECE3B6A60C521
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: C70CB07324056BC66A824347F40DB2D5
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
RM437_ENO_008.07.45_100.71.952.a018.fpsx, Type: Flash Image, Algo: BB5, XSR 1.5
Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.12.8.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.12.8.0, Algo: XSR 1.5
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: D9C25399C696B8549EDCDB1497A950B3A20DDFB6
Flashbus Write baud set to 5.0Mbits
Sending Certificates...
Certificates OK
Started group flash erase
Erase Certificate: SOS*ENO (CMT)
Waiting 320s for erasure finish...
Erase taken 0.47s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT SOS*ENO Certificate...
Programming Status OK!
All blocks written OK! Time taken 2.156s
Flashing Speed: 5979.49 kBit/S
Restarting MCU...
Processing RM437_ENO_008.07.45_100.71.952.a018.fpsx (APE)...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Reading info...
MCU Version V ICPR71_09w47.11
MCU Date 14-02-11
Product  RM-437 (Nokia E63)
Manufacturer (c) Nokia
IMEI  357397046246640
Mastercode 3574673113
IMEI Spare 3A75930764426604
IMEI SV  3375930764426614F7000000
PSN  M7O149218
Product Code 0599062
Basic Product Code 0561985
PSD  0000000000000000
LPSN  0
WLAN MAC 9CCAD981B960
RETU  16
TAHVO  22
AHNE  11
HW  1202
RFIC  17141716
DSP  sofie.ICPR71_09w40
Simlock Server SIMLOCK SERVER
Simlock Key 5050200000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: 50502F
Simlock NCK #pw+8Rg„49097917727+1#
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!
 
Old 07-19-2012, 15:18   #2752 (permalink)
No Life Poster
 
.::Gsm-Play::.'s Avatar
 
Join Date: Jul 2011
Location: Great India
Posts: 1,637
Member: 1615596
Status: Offline
Sonork: 100.160704?
Thanks Meter: 763
Thumbs up N72 Flashing done.

Code:
Establishing Connection with Box in Main Mode...
Handling device: [Cyclone Team], [Cyclone Bootloader], [Platform: Classic]
Handling device: [Cyclone Team], [Cyclone Box], [Platform: Classic]
Initializing box...
Box Firmware: Cyclone Main Application v02.04, (Jun 10 2012 18:37:57, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2012
Hardware Platform: Cyclone Reloaded Flasher Interface (c) 2012 KarwosLabs
Box Serial Number: B0000xxx
HW Revision: D, Suitable for: Production, Case: Reloaded Box Casing, MCU Manufacture Time: 2012, wk01 / 2011, wk27
Box is activated
Started box selftests procedure
USB Voltage 4.86v PASSED
MCU Voltage 3.28v PASSED
Core Voltage 1.80v PASSED
VBAT Voltage 1.17v PASSED
VBAT Voltage 4.88v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
Internal Box VPP Enabled
VPP Voltage 4.92v PASSED
Box VPP disabled
VPP Voltage 0.02v PASSED
All box selftests passed!
Super DCT4 Activation: TRUE
XGold/Blackberry Service Running, Counter: 100
Avaiable Physical Memory: 928.788MB
Avaiable Virtual Memory: 1.895GB
Avaiable Pagefile: 2.576GB
Initializing FBUS...
All initialized - Ready to work
MCU Version V 05wk07v42.2
MCU Date 13-04-06
Product  RM-180 (Nokia N72)
Manufacturer (c) Nokia.  
IMEI  359726004307697
Mastercode 501763726
IMEI Spare 3A95270640036709
IMEI SV  3395270640036709F1000000
PSN  CTB089515
Product Code 0530869
Basic Product Code 0530940
PSD  0000001700000000
RETU  32
TAHVO  52
AHNE  22
HW  5001
RFIC  150a160f
DSP  rolf_espresso_05wk07v28
Simlock Server SIMLOCK SERVER VERSION 58
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Auto Selecting Flash Files on User Request...
Product Code: 0530869
Scanning avaiable products...
Processing C:\Program Files\Nokia\Phoenix\Products\...
Found 63 products, Filtering DCT4 Products - wait...
4 Products left after filtering. Ready.
Scanning avaiable products...
Processing C:\Program Files\Nokia\Phoenix\Products\...
Found 63 products, Filtering BB5 Products - wait...
33 Products left after filtering. Ready.
This is Valid BB5 Product
Retrieving Variants for Product RM-180 - wait...
77 Variants Retrieved
Variant found for readen Product Data!
Processing pre flash tasks...
Backing up RPL...
RPL Creation started...
Processing CMT Part...
Storing Product Code...
Storing PSN...
Storing HWID...
Simlock Store not supported, not a PA_SL2 Phone
WMDRM Store not supported
Reading Security Block...
Security block OK and saved to "RM-180_359726004307697_732012_10553 PM.SecurityBlock.PM"
WARNING: "0580001521B94F51B37C0230E116CFEA2CB6010E.B0000474" Not Exists, Will read it...
Reading CYC file from phone...
Booting CMT...
APE_SYSTEM_ASIC_ID: 17100701
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID:  C5FE2A95F80A88BD3490A2E00CDC33A45E64621F
APE_ROOT_KEY_HASH: 2C05369F57CC3C4CF9E783E83D9B512B00000000
APE_BOOT_ROM_CRC: AB5E4ADB
APE_SECURE_ROM_CRC: 27A06946
CMT_SYSTEM_ASIC_ID: 000000010000022600010006000C192101012200
CMT_EM_ASIC_ID:  00000232
CMT_EM_ASIC_ID:  00000352
CMT_PUBLIC_ID:  0580001521B94F51B37C0230E116CFEA2CB6010E
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: E9EFF4BFAA5393217CA6B17755FC3E14
CMT_BOOT_ROM_CRC: F28A211F
CMT_SECURE_ROM_CRC: CEA7B19D
CMT Ready!
RAP3Gv2_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.21.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
Readed OK, Saving to "0580001521B94F51B37C0230E116CFEA2CB6010E.B0000474"
Storing Additional Data...
Checking Superdongle Key...
Encrypting Superdongle Key...
Storing Superdongle Key...
Checking CMLA Key...
CMLA Key Store Problem -> Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Booting CMT...
APE_SYSTEM_ASIC_ID: 17100701
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID:  C5FE2A95F80A88BD3490A2E00CDC33A45E64621F
APE_ROOT_KEY_HASH: 2C05369F57CC3C4CF9E783E83D9B512B00000000
APE_BOOT_ROM_CRC: AB5E4ADB
APE_SECURE_ROM_CRC: 27A06946
CMT_SYSTEM_ASIC_ID: 000000010000022600010006000C192101012200
CMT_EM_ASIC_ID:  00000232
CMT_EM_ASIC_ID:  00000352
CMT_PUBLIC_ID:  0580001521B94F51B37C0230E116CFEA2CB6010E
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: E9EFF4BFAA5393217CA6B17755FC3E14
CMT_BOOT_ROM_CRC: F28A211F
CMT_SECURE_ROM_CRC: CEA7B19D
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAP3Gv2_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.21.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0001000200000111, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00010002 (AMD), Size: 8MBytes, VPP: 31V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
Searching for BootCode: DualLine 32Bit
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,APE]: 0x00EC003600A500C0, Samsung, NAND
Requested Algorithm: OMAP1610 GBBM-1.8.1 ALG (APE)
FlashContent[0,APE]: 00020000000600000000000000000000, NAND
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0036 (Samsung), Size: 8MBytes, VPP: 21V
h3_sam_nand_format.fg, Type: Algorithm, Rev: 0.1.16.255, Algo: OMAP1610 FORMAT ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
Flashbus Write baud set to 5.0Mbits
Storing NPC...
CMT CCC Not Found
CMT HWC Not Found
Storing VARIANT...
CMT PARTNERC Not Found
Processing APE Part...
Storing Product Code...
Storing PSN...
Storing HWID...
APE NPC Not Found
APE CCC Not Found
APE HWC Not Found
APE VARIANT Not Found
APE PARTNERC Not Found
Restarting MCU...
RPL Saved OK
RPL backup thread finished, continuing...
Pre flash tasks finished, continuing...
Processing RM180_50734401.C0 (CMT)...
Booting CMT...
APE_SYSTEM_ASIC_ID: 17100701
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID:  C5FE2A95F80A88BD3490A2E00CDC33A45E64621F
APE_ROOT_KEY_HASH: 2C05369F57CC3C4CF9E783E83D9B512B00000000
APE_BOOT_ROM_CRC: AB5E4ADB
APE_SECURE_ROM_CRC: 27A06946
CMT_SYSTEM_ASIC_ID: 000000010000022600010006000C192101012200
CMT_EM_ASIC_ID:  00000232
CMT_EM_ASIC_ID:  00000352
CMT_PUBLIC_ID:  0580001521B94F51B37C0230E116CFEA2CB6010E
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: E9EFF4BFAA5393217CA6B17755FC3E14
CMT_BOOT_ROM_CRC: F28A211F
CMT_SECURE_ROM_CRC: CEA7B19D
CMT Ready!
RM180_50734401.C0, Type: Flash Image, Algo: BB5, BB5 ALGORITHM, BB5, OMAP1610 GBBM-1.8.1 ALG
Searching for BootCode: DualLine 32Bit
RAP3Gv2_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.21.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0001000200000111, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00010002 (AMD), Size: 8MBytes, VPP: 31V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
Flashbus Write baud set to 5.0Mbits
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00000000-0x0052B469, NOR
EraseArea[0,CMT]: 0x006A0000-0x006BFFFF, NOR
EraseArea[0,CMT]: 0x006DF000-0x006EFFFF, NOR
EraseArea[0,CMT]: 0x00700000-0x007EFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 46.828s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Skipping CMT PAPUBKEYS Certificate (already sent)...
Programming Status OK!
All blocks written OK! Time taken 87.531s
Flashing Speed: 2749.30 kBit/S
Restarting MCU...
Processing RM180_50734401.C0 (APE)...
Booting CMT...
APE_SYSTEM_ASIC_ID: 17100701
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID:  C5FE2A95F80A88BD3490A2E00CDC33A45E64621F
APE_ROOT_KEY_HASH: 2C05369F57CC3C4CF9E783E83D9B512B00000000
APE_BOOT_ROM_CRC: AB5E4ADB
APE_SECURE_ROM_CRC: 27A06946
CMT_SYSTEM_ASIC_ID: 000000010000022600010006000C192101012200
CMT_EM_ASIC_ID:  00000232
CMT_EM_ASIC_ID:  00000352
CMT_PUBLIC_ID:  0580001521B94F51B37C0230E116CFEA2CB6010E
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: E9EFF4BFAA5393217CA6B17755FC3E14
CMT_BOOT_ROM_CRC: F28A211F
CMT_SECURE_ROM_CRC: CEA7B19D
CMT Ready!
RM180_50734401.C0, Type: Flash Image, Algo: BB5, BB5 ALGORITHM, BB5, OMAP1610 GBBM-1.8.1 ALG
Searching for BootCode: DualLine 32Bit
RAP3Gv2_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.21.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0001000200000111, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00010002 (AMD), Size: 8MBytes, VPP: 31V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
Searching for BootCode: DualLine 32Bit
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,APE]: 0x00EC003600A500C0, Samsung, NAND
Requested Algorithm: OMAP1610 GBBM-1.8.1 ALG (APE)
FlashContent[0,APE]: 00020000000600000000000000000000, NAND
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0036 (Samsung), Size: 64MBytes, VPP: 21V
h3_sam_nand_gbbm.fg, Type: Algorithm, Rev: 0.1.33.0, Algo: OMAP1610 GBBM-1.8.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
Flashbus Write baud set to 5.0Mbits
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,APE]: 0x00000000-0x0000FFFF, NAND
EraseArea[0,APE]: 0x00010000-0x0001FFFF, NAND
EraseArea[0,APE]: 0x00020000-0x000203FF, NAND
EraseArea[0,APE]: 0x00050000-0x03ECFFFF, NAND
Waiting 320s for erasure finish...
Erase taken 6.141s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing APE KEYS Certificate...
Writing APE X-LOADER Certificate...
Writing APE PRIMAPP Certificate...
Writing APE SOS+LOADER Certificate...
Writing APE SOS+XZIP Certificate...
Writing APE PASUBTOC Certificate...
Writing APE PAPUBKEYS Certificate...
Skipping APE PAPUBKEYS Certificate (already sent)...
Writing APE SOS*CORE Certificate...
Programming Status OK!
All blocks written OK! Time taken 34.375s
Flashing Speed: 7000.69 kBit/S
Restarting MCU...
Processing RM180_50734401.V08 (CMT)...
Processing RM180_50734401.V08 (APE)...
Booting CMT...
APE_SYSTEM_ASIC_ID: 17100701
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID:  C5FE2A95F80A88BD3490A2E00CDC33A45E64621F
APE_ROOT_KEY_HASH: 2C05369F57CC3C4CF9E783E83D9B512B00000000
APE_BOOT_ROM_CRC: AB5E4ADB
APE_SECURE_ROM_CRC: 27A06946
CMT_SYSTEM_ASIC_ID: 000000010000022600010006000C192101012200
CMT_EM_ASIC_ID:  00000232
CMT_EM_ASIC_ID:  00000352
CMT_PUBLIC_ID:  0580001521B94F51B37C0230E116CFEA2CB6010E
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: E9EFF4BFAA5393217CA6B17755FC3E14
CMT_BOOT_ROM_CRC: F28A211F
CMT_SECURE_ROM_CRC: CEA7B19D
CMT Ready!
RM180_50734401.V08, Type: Flash Image, Algo: BB5, OMAP1610 GBBM-1.8.1 ALG, BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv2_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.21.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 100Kbits
Using OLD BB5 FLASHING PROTOCOL
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0001000200000111, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00010002 (AMD), Size: 8MBytes, VPP: 31V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
Searching for BootCode: DualLine 32Bit
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,APE]: 0x00EC003600A500C0, Samsung, NAND
Requested Algorithm: OMAP1610 GBBM-1.8.1 ALG (APE)
FlashContent[0,APE]: 00020000000600000000000000000000, NAND
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0036 (Samsung), Size: 64MBytes, VPP: 21V
h3_sam_nand_gbbm.fg, Type: Algorithm, Rev: 0.1.33.0, Algo: OMAP1610 GBBM-1.8.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
Flashbus Write baud set to 5.0Mbits
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,APE]: 0x01AE0000-0x02AFFFFF, NAND
EraseArea[0,APE]: 0x02B00000-0x03ECFFFF, NAND
Waiting 320s for erasure finish...
Erase taken 3.516s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 22.250s
Flashing Speed: 4059.87 kBit/S
Restarting MCU...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Reading info...
MCU Version V 05wk07v47
MCU Date 30-01-07
Product  RM-180 (Nokia N72)
Manufacturer (c) Nokia.    
IMEI  359726004307697
Mastercode 501763726
IMEI Spare 3A95270640036709
IMEI SV  3395270640036709F6000000
PSN  CTB089515
Product Code 0530869
Basic Product Code 0530940
PSD  0000001700000000
RETU  32
TAHVO  52
AHNE  22
HW  5001
RFIC  150a160f
DSP  rolf_espresso_05wk07v29p1
Simlock Server SIMLOCK SERVER VERSION 58
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!
 
Old 07-19-2012, 15:20   #2753 (permalink)
No Life Poster
 
.::Gsm-Play::.'s Avatar
 
Join Date: Jul 2011
Location: Great India
Posts: 1,637
Member: 1615596
Status: Offline
Sonork: 100.160704?
Thanks Meter: 763
Thumbs up N95 {8gb} Flashing done.

Code:
Establishing Connection with Box in Main Mode...
Handling device: [Cyclone Team], [Cyclone Box], [Platform: Classic]
Initializing box...
Box Firmware: Cyclone Main Application v02.04, (Jun 10 2012 18:37:57, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2012
Hardware Platform: Cyclone Reloaded Flasher Interface (c) 2012 KarwosLabs
Box Serial Number: B0000xxxx
HW Revision: D, Suitable for: Production, Case: Reloaded Box Casing, MCU Manufacture Time: 2012, wk01 / 2011, wk27
Box is activated
Started box selftests procedure
USB Voltage 5.01v PASSED
MCU Voltage 3.28v PASSED
Core Voltage 1.80v PASSED
VBAT Voltage 1.16v PASSED
VBAT Voltage 4.81v PASSED
Box VPP disabled
VPP Voltage 0.02v PASSED
Internal Box VPP Enabled
VPP Voltage 4.97v PASSED
Box VPP disabled
VPP Voltage 0.02v PASSED
All box selftests passed!
Super DCT4 Activation: TRUE
XGold/Blackberry Service Running, Counter: 100
Avaiable Physical Memory: 1.97GB
Avaiable Virtual Memory: 1.895GB
Avaiable Pagefile: 2.798GB
Initializing FBUS...
All initialized - Ready to work
MCU Version V 06wk41v64.20
MCU Date 01-10-09
Product  RM-320 (Nokia N95 8GB)
Manufacturer (c) Nokia
IMEI  355739028681587
Mastercode 274612721
IMEI Spare 3A55370982865108
IMEI SV  3355370982865118F4000000
PPM  35.0.001j35.0.00108.01k rm320_eno_Cust2008wk14updv0qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_030_000_M011, 
CNT  RM320_030_000_M011, 
PSN  MDJ389221
Product Code 0558787
Basic Product Code 0548236
PSD  0000000000000000
LPSN  0
WLAN MAC 0022FC5BEDF3
APE SW  35.0.001
APE Variant 35.0.00108.01
APE Test  rm320_eno_Cust2008wk14updv0
APE HW  1
APE ADSP 256
APE BT  HCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.
RETU  15
TAHVO  22
AHNE  11
HW  4151i35.0.001j35.0.00108.01k rm320_eno_Cust2008wk14updv0qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_030_000_M011, 
PCI  i35.0.001j35.0.00108.01k rm320_eno_Cust2008wk14updv0qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_030_000_M011, 
UEM  35.0.001j35.0.00108.01k rm320_eno_Cust2008wk14updv0qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_030_000_M011, ¥RM320_030_000_M011, 
UPP  35.0.001j35.0.00108.01k rm320_eno_Cust2008wk14updv0qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_030_000_M011, ¥RM320_030_000_M011, 
RFIC  17141715
DSP  aino.ICPR62_08w28p2i35.0.001j35.0.00108.01k rm320_eno_Cust2008wk14updv0qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_030_000_M011, ¥RM320_030_000_M011, 
LCD  35.0.001j35.0.00108.01k rm320_eno_Cust2008wk14updv0qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_030_000_M011, 
BT  35.0.001j35.0.00108.01k rm320_eno_Cust2008wk14updv0qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_030_000_M011, 
ADSP Sw  35.0.001j35.0.00108.01k rm320_eno_Cust2008wk14updv0qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_030_000_M011, 
ADSP DevID  35.0.001j35.0.00108.01k rm320_eno_Cust2008wk14updv0qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_030_000_M011, 
ADSP RevID  35.0.001j35.0.00108.01k rm320_eno_Cust2008wk14updv0qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_030_000_M011, ¥RM320_030_000_M011, 
AEM  35.0.001j35.0.00108.01k rm320_eno_Cust2008wk14updv0qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_030_000_M011, ¥RM320_030_000_M011, 
Flip MCUSW  35.0.001j35.0.00108.01k rm320_eno_Cust2008wk14updv0qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_030_000_M011, ¥RM320_030_000_M011, 
Simlock Server SIMLOCK SERVER
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Auto Selecting Flash Files on User Request...
Product Code: 0558787
Scanning avaiable products...
Processing C:\Program Files\Nokia\Phoenix\Products\...
Found 64 products, Filtering DCT4 Products - wait...
5 Products left after filtering. Ready.
This is Valid BB5 Product
No variant found with given Product Code, selecting first one
Processing pre flash tasks...
Backing up RPL...
RPL Creation started...
Processing CMT Part...
Storing Product Code...
Storing PSN...
Storing HWID...
Trying to store Simlock...
Reading Configuration Key...
Hashing...
Reading SHA1-RSA Signature...
Reading SHA1-HMAC Signature...
Storing Simlock...
Trying to store WMDRM RPL...
Reading Keys...
Storing WMDRM PD...
Reading Security Block...
Security block OK and saved to "RM-320_355739028681587_732012_81702 PM.SecurityBlock.PM"
WARNING: "0D70000976730052E5676D9F4C816E631BF48E42.B0000474" Not Exists, Will read it...
Reading CYC file from phone...
Booting CMT...
APE_SYSTEM_ASIC_ID: 24200705
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID:  C5C5E22F49FDBFD21D79B48B0A18E602F8ED9C4F
APE_ROOT_KEY_HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  0D70000976730052E5676D9F4C816E631BF48E42
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC: A8C1D671
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
New_RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.11.16.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x00012C7E00006921, AMD, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
Sending Auxiliary Loader...
Auxiliary Loader Sent!
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
Loader: RAPxx CommonBoot v1.06 (C) 2011 KarwosLabs 
Custom loader running OK! Working...
Readed OK, Saving to "0D70000976730052E5676D9F4C816E631BF48E42.B0000474"
Storing Additional Data...
Checking Superdongle Key...
Encrypting Superdongle Key...
Storing Superdongle Key...
Checking CMLA Key...
Storing CMLA Key...
Booting CMT...
APE_SYSTEM_ASIC_ID: 24200705
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID:  C5C5E22F49FDBFD21D79B48B0A18E602F8ED9C4F
APE_ROOT_KEY_HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  0D70000976730052E5676D9F4C816E631BF48E42
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC: A8C1D671
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.12.8.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x00012C7E00006921, AMD, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
Searching for BootCode: DualLine 32Bit
FlashChip 0x00012C7E (AMD), Size: 16MBytes, VPP: 9V
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.12.8.0, Algo: XSR 1.5
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
Searching for BootCode: DualLine 32Bit
OMAP2420_2nd.fg, Type: 2nd Boot Loader, Rev: 512.12.8.0, Algo: BB5
Adding FUR Client (APE, State: Start)...
APE FUR Ready!
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,APE]: 0x0000000000000000, Unknown, RAM
FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,APE]: 0x00EC004000000000, Samsung, ONENAND
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0040 (Samsung), Size: 256MBytes, VPP: Not Supported
OMAP2420_XSR15_alg.fg, Type: Algorithm, Rev: 512.12.8.0, Algo: OMAP2420 UNISTORE-II-1.5.1 ALG
Initializing TurboCache...
TurboCache Loaded!
Writing APE KEYS Certificate...
Writing APE PASUBTOC Certificate...
Writing APE ALG Certificate...
APE Algorithm Ready!
Adding FUR Client (APE, State: Ready)...
APE FUR Ready!
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
Flashbus Write baud set to 5.0Mbits
Storing NPC...
Storing CCC...
Storing HWC...
Storing VARIANT...
CMT PARTNERC Not Found
Processing APE Part...
Storing Product Code...
Storing PSN...
Storing HWID...
Storing NPC...
Storing CCC...
Storing HWC...
APE VARIANT Not Found
APE PARTNERC Not Found
Restarting MCU...
RPL Saved OK
RPL backup thread finished, continuing...
Pre flash tasks finished, continuing...
Processing RM-320_35.0.001_PR.C0R (CMT)...
Booting CMT...
APE_SYSTEM_ASIC_ID: 24200705
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID:  C5C5E22F49FDBFD21D79B48B0A18E602F8ED9C4F
APE_ROOT_KEY_HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  0D70000976730052E5676D9F4C816E631BF48E42
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC: A8C1D671
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
RM-320_35.0.001_PR.C0R, Type: Flash Image, Algo: BB5, XSR 1.5, BB5, OMAP2420 UNISTORE-II-1.5.1 ALG
Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.12.8.0, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x00012C7E00006921, AMD, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
Searching for BootCode: DualLine 32Bit
FlashChip 0x00012C7E (AMD), Size: 16MBytes, VPP: 9V
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.12.8.0, Algo: XSR 1.5
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
Flashbus Write baud set to 5.0Mbits
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00080000-0x007CF385, NOR
EraseArea[0,CMT]: 0x00000000-0x0005FFFF, NOR
EraseArea[0,CMT]: 0x00880000-0x00FDFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 42.688s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 35.219s
Flashing Speed: 16549.18 kBit/S
Restarting MCU...
Processing RM-320_35.0.001_PR.C0R (APE)...
Booting CMT...
APE_SYSTEM_ASIC_ID: 24200705
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID:  C5C5E22F49FDBFD21D79B48B0A18E602F8ED9C4F
APE_ROOT_KEY_HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  0D70000976730052E5676D9F4C816E631BF48E42
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC: A8C1D671
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
RM-320_35.0.001_PR.C0R, Type: Flash Image, Algo: BB5, XSR 1.5, BB5, OMAP2420 UNISTORE-II-1.5.1 ALG
Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.12.8.0, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x00012C7E00006921, AMD, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
Searching for BootCode: DualLine 32Bit
FlashChip 0x00012C7E (AMD), Size: 16MBytes, VPP: 9V
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.12.8.0, Algo: XSR 1.5
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
Searching for BootCode: DualLine 32Bit
OMAP2420_2nd.fg, Type: 2nd Boot Loader, Rev: 512.12.8.0, Algo: BB5
Adding FUR Client (APE, State: Start)...
APE FUR Ready!
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,APE]: 0x0000000000000000, Unknown, RAM
FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,APE]: 0x00EC004000000000, Samsung, ONENAND
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0040 (Samsung), Size: 256MBytes, VPP: Not Supported
OMAP2420_XSR15_alg.fg, Type: Algorithm, Rev: 512.12.8.0, Algo: OMAP2420 UNISTORE-II-1.5.1 ALG
Initializing TurboCache...
TurboCache Loaded!
Writing APE KEYS Certificate...
Writing APE PASUBTOC Certificate...
Writing APE ALG Certificate...
APE Algorithm Ready!
Adding FUR Client (APE, State: Ready)...
APE FUR Ready!
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
Flashbus Write baud set to 5.0Mbits
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,APE]: 0x00000200-0x0000AFFF, NAND
EraseArea[0,APE]: 0x0000B800-0x000AFFFF, NAND
EraseArea[0,APE]: 0x00000000-0x00000FFF, NAND
EraseArea[0,APE]: 0x0000D800-0x0000E9FF, NAND
EraseArea[0,APE]: 0x00080000-0x000BFFFF, NAND
EraseArea[0,APE]: 0x000E0000-0x0045FFFF, NAND
EraseArea[0,APE]: 0x004C0000-0x0073FFFF, NAND
EraseArea[0,APE]: 0x00A40000-0x06F3FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 1.203s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing APE X-LOADER Certificate...
Writing APE KEYS Certificate...
Writing APE PRIMAPP Certificate...
Writing APE X-LOADER Certificate...
Writing APE KEYS Certificate...
Writing APE PRIMAPP Certificate...
Writing APE SOS+XZIP Certificate...
Writing APE PASUBTOC Certificate...
Writing APE PAPUBKEYS Certificate...
Writing APE SOS+UPDAPP Certificate...
Writing APE SOS+CORE Certificate...
Writing APE SOS+ROFS Certificate...
Programming Status OK!
All blocks written OK! Time taken 111.484s
Flashing Speed: 5228.07 kBit/S
Restarting MCU...
Processing RM-320_35.0.001_PR.v08 (CMT)...
Processing RM-320_35.0.001_PR.v08 (APE)...
Booting CMT...
APE_SYSTEM_ASIC_ID: 24200705
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID:  C5C5E22F49FDBFD21D79B48B0A18E602F8ED9C4F
APE_ROOT_KEY_HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  0D70000976730052E5676D9F4C816E631BF48E42
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC: A8C1D671
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
RM-320_35.0.001_PR.v08, Type: Flash Image, Algo: BB5, OMAP2420 UNISTORE-II-1.5.1 ALG, BB5, XSR 1.5
Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.12.8.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x00012C7E00006921, AMD, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
Searching for BootCode: DualLine 32Bit
FlashChip 0x00012C7E (AMD), Size: 16MBytes, VPP: 9V
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.12.8.0, Algo: XSR 1.5
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
Searching for BootCode: DualLine 32Bit
OMAP2420_2nd.fg, Type: 2nd Boot Loader, Rev: 512.12.8.0, Algo: BB5
Adding FUR Client (APE, State: Start)...
APE FUR Ready!
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,APE]: 0x0000000000000000, Unknown, RAM
FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,APE]: 0x00EC004000000000, Samsung, ONENAND
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0040 (Samsung), Size: 256MBytes, VPP: Not Supported
OMAP2420_XSR15_alg.fg, Type: Algorithm, Rev: 512.12.8.0, Algo: OMAP2420 UNISTORE-II-1.5.1 ALG
Initializing TurboCache...
TurboCache Loaded!
Writing APE KEYS Certificate...
Writing APE PASUBTOC Certificate...
Writing APE ALG Certificate...
APE Algorithm Ready!
Adding FUR Client (APE, State: Ready)...
APE FUR Ready!
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
Flashbus Write baud set to 5.0Mbits
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,APE]: 0x05140000-0x06F3FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 0.328s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing APE SOS+ROFX Certificate...
Programming Status OK!
All blocks written OK! Time taken 16.15s
Flashing Speed: 5901.96 kBit/S
Restarting MCU...
Processing RM320_31.0.002_025_zzz_U03_uda.fpsx (CMT)...
Processing RM320_31.0.002_025_zzz_U03_uda.fpsx (APE)...
Booting CMT...
APE_SYSTEM_ASIC_ID: 24200705
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID:  C5C5E22F49FDBFD21D79B48B0A18E602F8ED9C4F
APE_ROOT_KEY_HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  0D70000976730052E5676D9F4C816E631BF48E42
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC: A8C1D671
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
RM320_31.0.002_025_zzz_U03_uda.fpsx, Type: Flash Image, Algo: BB5, OMAP2420 UNISTORE-II-1.5.1 ALG, BB5, XSR 1.5
Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.12.8.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x00012C7E00006921, AMD, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
Searching for BootCode: DualLine 32Bit
FlashChip 0x00012C7E (AMD), Size: 16MBytes, VPP: 9V
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.12.8.0, Algo: XSR 1.5
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
Searching for BootCode: DualLine 32Bit
OMAP2420_2nd.fg, Type: 2nd Boot Loader, Rev: 512.12.8.0, Algo: BB5
Adding FUR Client (APE, State: Start)...
APE FUR Ready!
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,APE]: 0x0000000000000000, Unknown, RAM
FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,APE]: 0x00EC004000000000, Samsung, ONENAND
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0040 (Samsung), Size: 256MBytes, VPP: Not Supported
OMAP2420_XSR15_alg.fg, Type: Algorithm, Rev: 512.12.8.0, Algo: OMAP2420 UNISTORE-II-1.5.1 ALG
Initializing TurboCache...
TurboCache Loaded!
Writing APE KEYS Certificate...
Writing APE PASUBTOC Certificate...
Writing APE ALG Certificate...
APE Algorithm Ready!
Adding FUR Client (APE, State: Ready)...
APE FUR Ready!
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,APE]: 0x06F40000-0x0F87FFFF, NAND
Erase Certificate: SOS-USER (APE)
Waiting 320s for erasure finish...
Erase taken 2.938s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 40.985s
Flashing Speed: 5564.00 kBit/S
Restarting MCU...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Reading info...
MCU Version V 06wk41v64.20
MCU Date 01-10-09
Product  RM-320 (Nokia N95 8GB)
Manufacturer (c) Nokia
IMEI  355739028681587
Mastercode 274612721
IMEI Spare 3A55370982865108
IMEI SV  3355370982865118F4000000
PPM  35.0.001j35.0.00108.01k rm320_eno_Cust2008wk14updv0qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_31.0.002_U03, rRM320_030_000_M011, 
CNT  RM320_31.0.002_U03, rRM320_030_000_M011, 
PSN  MDJ389221
Product Code 0558787
Basic Product Code 0548236
PSD  0000000000000000
LPSN  0
WLAN MAC 0022FC5BEDF3
APE SW  35.0.001
APE Variant 35.0.00108.01
APE Test  rm320_eno_Cust2008wk14updv0
APE HW  1
APE ADSP 256
APE BT  HCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.
RETU  15
TAHVO  22
AHNE  11
HW  4151i35.0.001j35.0.00108.01k rm320_eno_Cust2008wk14updv0qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_31.0.002_U03, rRM320_030_000_M011, 
PCI  i35.0.001j35.0.00108.01k rm320_eno_Cust2008wk14updv0qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_31.0.002_U03, rRM320_030_000_M011, 
UEM  35.0.001j35.0.00108.01k rm320_eno_Cust2008wk14updv0qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_31.0.002_U03, rRM320_030_000_M011, ¥RM320_31.0.002_U03, ¥RM320_030_000_M011, 
UPP  35.0.001j35.0.00108.01k rm320_eno_Cust2008wk14updv0qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_31.0.002_U03, rRM320_030_000_M011, ¥RM320_31.0.002_U03, ¥RM320_030_000_M011, 
RFIC  17141715
DSP  aino.ICPR62_08w28p2i35.0.001j35.0.00108.01k rm320_eno_Cust2008wk14updv0qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_31.0.002_U03, rRM320_030_000_M011, ¥RM320_31.0.002_U03, ¥RM320_030_000_M011, 
LCD  35.0.001j35.0.00108.01k rm320_eno_Cust2008wk14updv0qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_31.0.002_U03, rRM320_030_000_M011, 
BT  35.0.001j35.0.00108.01k rm320_eno_Cust2008wk14updv0qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_31.0.002_U03, rRM320_030_000_M011, 
ADSP Sw  35.0.001j35.0.00108.01k rm320_eno_Cust2008wk14updv0qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_31.0.002_U03, rRM320_030_000_M011, 
ADSP DevID  35.0.001j35.0.00108.01k rm320_eno_Cust2008wk14updv0qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_31.0.002_U03, rRM320_030_000_M011, 
ADSP RevID  35.0.001j35.0.00108.01k rm320_eno_Cust2008wk14updv0qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_31.0.002_U03, rRM320_030_000_M011, ¥RM320_31.0.002_U03, ¥RM320_030_000_M011, 
AEM  35.0.001j35.0.00108.01k rm320_eno_Cust2008wk14updv0qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_31.0.002_U03, rRM320_030_000_M011, ¥RM320_31.0.002_U03, ¥RM320_030_000_M011, 
Flip MCUSW  35.0.001j35.0.00108.01k rm320_eno_Cust2008wk14updv0qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256rRM320_31.0.002_U03, rRM320_030_000_M011, ¥RM320_31.0.002_U03, ¥RM320_030_000_M011, 
Simlock Server SIMLOCK SERVER
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!
 
Old 07-19-2012, 15:26   #2754 (permalink)
No Life Poster
 
.::Gsm-Play::.'s Avatar
 
Join Date: Jul 2011
Location: Great India
Posts: 1,637
Member: 1615596
Status: Offline
Sonork: 100.160704?
Thanks Meter: 763
Thumbs up X1-01 Flashing done.

Code:
Establishing Connection with Box in Main Mode...
Handling device: [Cyclone Team], [Cyclone Box], [Platform: Classic]
Initializing box...
Box Firmware: Cyclone Main Application v02.04, (Jun 10 2012 18:37:57, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2012
Hardware Platform: Cyclone Reloaded Flasher Interface (c) 2012 KarwosLabs
Box Serial Number: B0000xxx
HW Revision: D, Suitable for: Production, Case: Reloaded Box Casing, MCU Manufacture Time: 2012, wk01 / 2011, wk27
Box is activated
Started box selftests procedure
USB Voltage 5.02v PASSED
MCU Voltage 3.28v PASSED
Core Voltage 1.80v PASSED
VBAT Voltage 1.22v PASSED
VBAT Voltage 4.99v PASSED
Box VPP disabled
VPP Voltage 0.02v PASSED
Internal Box VPP Enabled
VPP Voltage 4.97v PASSED
Box VPP disabled
VPP Voltage 0.02v PASSED
All box selftests passed!
Super DCT4 Activation: TRUE
XGold/Blackberry Service Running, Counter: 100
Avaiable Physical Memory: 1.391GB
Avaiable Virtual Memory: 1.895GB
Avaiable Pagefile: 3.212GB
Initializing FBUS...
All initialized - Ready to work
Scanning avaiable products...
Processing C:\Program Files\Nokia\Phoenix\Products\...
Found 54 products, Filtering DCT4 Products - wait...
4 Products left after filtering. Ready.
Retrieving Variants for Product RM-713 - wait...
3 Variants Retrieved
Processing pre-flash tasks...
Pre-flash tasks finished
Checking rm713_007.500...
Flash file sorted Okay.
1 file(s) embedded into image.
Booting X-Gold via ASC (press power-on if used non-battery cable)...
X-Gold: Ready, MCU ID: 0x3400
[PBL] : Ready
[EBL] : Mode CC
[EBL] : Default_RAM_Bootloader
[EBL] : Ready
Setting Baudrate to 921600bps...
Baudrate Accepted (921600bps)
Flash Chip 0x00208804, ST, Size: 16MBytes
Processing "hw_b1_rm713_r07.500.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x00000000-0x0001FFFF...
Flashing at 0x00000000...
Flashed 24576 bytes OK
Erasing 0x00800000-0x00BFFFFF...
Flashing at 0x00800000...
Flashed 4128768 bytes OK
Erasing 0x00C5D000-0x00E5FFFF...
Flashing at 0x00C5D000...
Flashed 1697536 bytes OK
Box VPP disabled
Checking rm7130_nai07.50mc...
Flash file sorted Okay.
1 file(s) embedded into image.
Booting X-Gold via ASC (press power-on if used non-battery cable)...
X-Gold: Ready, MCU ID: 0x3400
[PBL] : Ready
[EBL] : Mode CC
[EBL] : Default_RAM_Bootloader
[EBL] : Ready
Setting Baudrate to 921600bps...
Baudrate Accepted (921600bps)
Flash Chip 0x00208804, ST, Size: 16MBytes
Processing "hw_b1_rm7130_nai07.50mc.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x00E60000-0x00F5FFFF...
Flashing at 0x00E60000...
Flashed 712832 bytes OK
Box VPP disabled
Checking rm713_007.50mc...
Flash file sorted Okay.
1 file(s) embedded into image.
Booting X-Gold via ASC (press power-on if used non-battery cable)...
X-Gold: Ready, MCU ID: 0x3400
[PBL] : Ready
[EBL] : Mode CC
[EBL] : Default_RAM_Bootloader
[EBL] : Ready
Setting Baudrate to 921600bps...
Baudrate Accepted (921600bps)
Flash Chip 0x00208804, ST, Size: 16MBytes
Processing "hw_b1_rm713_007.50mc.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x00100000-0x007FFFFF...
Flashing at 0x00100000...
Flashed 5248960 bytes OK
Box VPP disabled
Processing post-flash tasks...
Setting Factory Defaults...
Factory defaults OK
Post-flash tasks finished...
Flash successfully finished!
 
Old 07-19-2012, 15:47   #2755 (permalink)
No Life Poster
 
dapx's Avatar
 
Join Date: Jun 2009
Location: Paraguay
Posts: 776
Member: 1064967
Status: Offline
Thanks Meter: 131
Unlock 5130 RM-495 Done!

Code:
MCU Version	V 07.91
MCU Date	29-10-09
Product		RM-495 (Nokia 5130 XpressMusic)
Manufacturer	(c) Nokia            
IMEI		358293035
Mastercode	4137425611
IMEI Spare	3A85920353777603
IMEI SV		3385920353777643F7000000
PPM		V 07.91, 29-10-09, RM-495, (c) Nokia            , AG
CNT		Content: ag_red, V 07.91, 29-10-09, RM-495, (c) Nokia            , 
PSN		GEM480009
Product Code	0571380
Module Code	0204024
Basic Product Code	0567772
PSD		0000000000000000
LPSN		0
RETU		16
TAHVO		22
AHNE		30
HW		4000
RFIC		06540601
DSP		ICPR72_09w33
LCD		SEIKO
BT		2222-302
Simlock Server	SIMLOCK SERVER
Simlock Key	7223100000000000
Simlock Profile	8000000000000000
Simlock Key Cnt	0
Simlock FBUS Cnt	0
Simlock [1,1]	State: CLOSED	Type: 7FFF6F07FFFFFFFF @ FC00	Data: 722310
Simlock [2,1]	State: CLOSED	Type: MCC-MNC	Data: 74810F
Simlock [3,1]	State: CLOSED	Type: MCC-MNC	Data: 74402F
Sending BB5 NCK Code...
NCK[7] - ACCEPTED
MCU Version	V 07.91
MCU Date	29-10-09
Product		RM-495 (Nokia 5130 XpressMusic)
Manufacturer	(c) Nokia            
IMEI		358293035
Mastercode	4137425611
IMEI Spare	3A85920353777603
IMEI SV		3385920353777643F7000000
PPM		V 07.91, 29-10-09, RM-495, (c) Nokia            , AG
CNT		Content: ag_red, V 07.91, 29-10-09, RM-495, (c) Nokia            , 
PSN		GEM480009
Product Code	0571380
Module Code	0204024
Basic Product Code	0567772
PSD		0000000000000000
LPSN		0
RETU		16
TAHVO		22
AHNE		30
HW		4000
RFIC		06540601
DSP		ICPR72_09w33
LCD		SEIKO
BT		2222-302
Simlock Server	SIMLOCK SERVER
Simlock Key	7223100000000000
Simlock Profile	8000000000000000
Simlock Key Cnt	0
Simlock FBUS Cnt	0
Simlock [1,1]	State: OPENED	Type: 7FFF6F07FFFFFFFF @ FC00	Data: 722310
Simlock [2,1]	State: OPENED	Type: MCC-MNC	Data: 74810F
Simlock [3,1]	State: OPENED	Type: MCC-MNC	Data: 74402F
Simlock NCK	#pw+1>\…59641684933+7#
 
Old 07-20-2012, 18:37   #2756 (permalink)
No Life Poster
 
dapx's Avatar
 
Join Date: Jun 2009
Location: Paraguay
Posts: 776
Member: 1064967
Status: Offline
Thanks Meter: 131
Unlock E5 RM-634 Done!

Code:
[Nokia E5-00 USB Phonet]: Port opened OK!
MCU Version	V ICPR82_10w18.16.3
MCU Date	06-12-10
Product		RM-634 (NOkia E5-00)
Manufacturer	(c) Nokia
IMEI		357920042
Mastercode	3267503576
IMEI Spare	3A75290024928300
IMEI SV		3375290024928310F9000000
PSN		2647916AA
Product Code	059H582
Module Code	0204474
Basic Product Code	059H390
PSD		0000000000000000
LPSN		0
WLAN MAC	AC81F3FD32E8
APE SW		042.014
APE Variant	042.014042.014.57.01042.014.376.01
APE Test		v0.034
APE HW		256
APE ADSP	256
RETU		35
TAHVO		00
AHNE		11
HW		3107
RFIC		|Vapaus_5.1 | Mikki_1.1
DSP		ICPR82_10w18.16.2
Simlock Server	SIMLOCK SERVER
Simlock Key	7223100000000000
Simlock Profile	0000000000000000
Simlock Key Cnt	0
Simlock FBUS Cnt	0
Simlock [1,1]	State: CLOSED	Type: MCC-MNC	Data: 74402F
Simlock [2,1]	State: CLOSED	Type: MCC-MNC	Data: 74402F
Simlock [3,1]	State: CLOSED	Type: 3F007F206F07FFFF @ FC00	Data: 722310
Simlock [4,1]	State: CLOSED	Type: 7FFF6F07FFFFFFFF @ FC00	Data: 722310
Simlock [5,1]	State: CLOSED	Type: MCC-MNC	Data: 74810F
Simlock [6,1]	State: CLOSED	Type: MCC-MNC	Data: 74810F
Sending BB5 NCK Code...
[Nokia E5-00 USB Phonet]: Port opened OK!
NCK[7] - ACCEPTED
[Nokia E5-00 USB Phonet]: Port opened OK!
MCU Version	V ICPR82_10w18.16.3
MCU Date	06-12-10
Product		RM-634 (NOkia E5-00)
Manufacturer	(c) Nokia
IMEI		357920042
Mastercode	3267503576
IMEI Spare	3A75290024928300
IMEI SV		3375290024928310F9000000
PSN		2647916AA
Product Code	059H582
Module Code	0204474
Basic Product Code	059H390
PSD		0000000000000000
LPSN		0
WLAN MAC	AC81F3FD32E8
APE SW		042.014
APE Variant	042.014042.014.57.01042.014.376.01
APE Test		v0.034
APE HW		256
APE ADSP	256
RETU		35
TAHVO		00
AHNE		11
HW		3107
RFIC		|Vapaus_5.1 | Mikki_1.1
DSP		ICPR82_10w18.16.2
Simlock Server	SIMLOCK SERVER
Simlock Key	7223100000000000
Simlock Profile	0000000000000000
Simlock Key Cnt	0
Simlock FBUS Cnt	0
Simlock [1,1]	State: OPENED	Type: MCC-MNC	Data: 74402F
Simlock [2,1]	State: OPENED	Type: MCC-MNC	Data: 74402F
Simlock [3,1]	State: OPENED	Type: 3F007F206F07FFFF @ FC00	Data: 722310
Simlock [4,1]	State: OPENED	Type: 7FFF6F07FFFFFFFF @ FC00	Data: 722310
Simlock [5,1]	State: OPENED	Type: MCC-MNC	Data: 74810F
Simlock [6,1]	State: OPENED	Type: MCC-MNC	Data: 74810F
Simlock NCK	#pw+4jlg88860156793+7#
 
Old 07-20-2012, 23:05   #2757 (permalink)
No Life Poster
 
dapx's Avatar
 
Join Date: Jun 2009
Location: Paraguay
Posts: 776
Member: 1064967
Status: Offline
Thanks Meter: 131
Full Flash E5 RM-634 Done!

Upgrade & Bye, Bye Logo...
Code:
[Nokia E5-00 USB Phonet]: Port opened OK!
MCU Version	V ICPR82_10w18.16.3
MCU Date	06-12-10
Product		RM-634 (NOkia E5-00)
Manufacturer	(c) Nokia
IMEI		357920042
Mastercode	3267503576
IMEI Spare	3A75290024928300
IMEI SV		3375290024928310F9000000
PSN		2647916AA
Product Code	059H582
Module Code	0204474
Basic Product Code	059H390
PSD		0000000000000000
LPSN		0
WLAN MAC	AC81F3FD32E8
APE SW		042.014
APE Variant	042.014042.014.57.01042.014.376.01
APE Test		v0.034
APE HW		256
APE ADSP	256
RETU		35
TAHVO		00
AHNE		11
HW		3107
RFIC		|Vapaus_5.1 | Mikki_1.1
DSP		ICPR82_10w18.16.2
Simlock Server	SIMLOCK SERVER
Simlock Key	7223100000000000
Simlock Profile	0000000000000000
Simlock Key Cnt	0
Simlock FBUS Cnt	0
Simlock [1,1]	State: OPENED	Type: MCC-MNC	Data: 74402F
Simlock [2,1]	State: OPENED	Type: MCC-MNC	Data: 74402F
Simlock [3,1]	State: OPENED	Type: 3F007F206F07FFFF @ FC00	Data: 722310
Simlock [4,1]	State: OPENED	Type: 7FFF6F07FFFFFFFF @ FC00	Data: 722310
Simlock [5,1]	State: OPENED	Type: MCC-MNC	Data: 74810F
Simlock [6,1]	State: OPENED	Type: MCC-MNC	Data: 74810F
Simlock NCK	#pw+4jlg88860156793+7#
Auto Selecting Flash Files on User Request...
[Nokia E5-00 USB Phonet]: Port opened OK!
Product Code: 059H582
Scanning avaiable products...
Processing C:\Archivos de programa\Nokia\Phoenix\Products\...
Found 78 products, Filtering DCT4 Products - wait...
19 Products left after filtering. Ready.
This is Valid BB5 Product
Retrieving Variants for Product RM-634 - wait...
4 Variants Retrieved
No variant found with given Product Code, selecting first one
Processing pre flash tasks...
Backing up RPL...
RPL Creation started...
Processing CMT Part...
[Nokia E5-00 USB Phonet]: Port opened OK!
Storing Product Code...
Storing PSN...
Storing HWID...
Trying to store Simlock...
Reading Configuration Key...
Hashing...
Reading SHA1-RSA Signature...
Reading SHA1-HMAC Signature...
Storing Simlock...
Trying to store WMDRM RPL...
Reading Keys...
Storing WMDRM PD...
Reading Security Block...
Security block OK and saved to "RM-634_357920042_20072012_180114.SecurityBlock.PM"
"0690011661DA03446588D0690BEB07A29E30FA45.C0001FF6" Exists, That is good...
Storing Additional Data...
Checking Superdongle Key...
Encrypting Superdongle Key...
Storing Superdongle Key...
Checking CMLA Key...
Storing CMLA Key...
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID:	000000030000022600010007600C192102031104
CMT_EM_ASIC_ID:		00000C35
CMT_EM_ASIC_ID:		00000C30
CMT_PUBLIC_ID:		0690011661DA03446588D0690BEB07A29E30FA45
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	916F75217F32081248B15C38DFC8E81B
CMT_BOOT_ROM_CRC:	E693EF0D
CMT_SECURE_ROM_CRC:	AC22615B
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.12.11.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Waiting for USB Boot ROM Answer...
ROM Ret: 0xFFFD125D
ROM CMT dwAddr: 0x10004FF0
ROM CMT dwLength: 0x00627837
Seems ROM Initialized OK!
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0020005000000031, ST, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x0020005000000031, ST, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00200050 (ST), Size: 512MBytes, VPP: Not Supported
FlashChip 0x00200050 (ST), Size: 512MBytes, VPP: Not Supported
RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.12.11.0, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
Box TX2 Data Pin set to: Service Pin 3
Waiting for FUR Client become avaiable...
[Nokia USB Flashing Generic]: Port opened OK!
FUR Avaiable!
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: CCD9F80559BA50D9B3E274F9E7120BE1EE4EEA7C
APE Subsystem Not Found
Storing NPC...
Storing CCC...
Storing HWC...
CMT VARIANT Not Found
CMT PARTNERC Not Found
Restarting MCU...
RPL Saved OK
RPL backup thread finished, continuing...
Backing up simlock...
[Nokia E5-00 USB Phonet]: Port opened OK!
MCU Version	V ICPR82_10w18.16.3
MCU Date	06-12-10
Product		RM-634 (NOkia E5-00)
Manufacturer	(c) Nokia
IMEI		357920042
Mastercode	3267503576
Simlock backup OK, saved to RM-634_357920042_20072012_180132.SLBackup.PM
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm634_091.001_prd.core.fpsx (CMT)...
Booting CMT...
[Nokia E5-00 USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID:	000000030000022600010007600C192102031104
CMT_EM_ASIC_ID:		00000C35
CMT_EM_ASIC_ID:		00000C30
CMT_PUBLIC_ID:		0690011661DA03446588D0690BEB07A29E30FA45
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	916F75217F32081248B15C38DFC8E81B
CMT_BOOT_ROM_CRC:	E693EF0D
CMT_SECURE_ROM_CRC:	AC22615B
CMT Ready!
rm634_091.001_prd.core.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
Searching for BootCode: DualLine 32Bit
RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.12.11.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Waiting for USB Boot ROM Answer...
ROM Ret: 0xFFFD125D
ROM CMT dwAddr: 0x10004FF0
ROM CMT dwLength: 0x00627837
Seems ROM Initialized OK!
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0020005000000031, ST, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x0020005000000031, ST, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00200050 (ST), Size: 512MBytes, VPP: Not Supported
FlashChip 0x00200050 (ST), Size: 512MBytes, VPP: Not Supported
RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.12.11.0, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
Box TX2 Data Pin set to: Service Pin 3
Waiting for FUR Client become avaiable...
[Nokia USB Flashing Generic]: Port opened OK!
FUR Avaiable!
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: CCD9F80559BA50D9B3E274F9E7120BE1EE4EEA7C
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00020000-0x0003FFFF, ONENAND
EraseArea[0,CMT]: 0x00060000-0x004DFFFF, ONENAND
EraseArea[0,CMT]: 0x008E0000-0x0E77FFFF, ONENAND
Erase Partition (CMT)
Waiting 320s for erasure finish...
Erase taken 3.641s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT ADA Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT RAP3NAND Certificate...
Writing CMT SOS+PMML Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT GENIO_INIT Certificate...
Writing CMT SOS*UPDAPP Certificate...
Writing CMT SOS*DSP0 Certificate...
Writing CMT LDSP Certificate...
Writing CMT SOS*ISASW Certificate...
Writing CMT SOS+CORE Certificate...
Writing CMT SOS+ROFS1 Certificate...
Programming Status OK!
All blocks written OK! Time taken 17.141s
Flashing Speed: 50407,08 kBit/S
Processing rm634_091.001_prd.core.fpsx (APE)...
Processing rm634_091.001_41.01_LTA_prd.rofs2.fpsx (CMT)...
rm634_091.001_41.01_LTA_prd.rofs2.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
PAPUBKEYS Hash for CMT: CCD9F80559BA50D9B3E274F9E7120BE1EE4EEA7C
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x08980000-0x0D0FFFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.625s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT SOS+ROFS2 Certificate...
Programming Status OK!
All blocks written OK! Time taken 8.781s
Flashing Speed: 56099,35 kBit/S
Processing rm634_091.001_41.01_LTA_prd.rofs2.fpsx (APE)...
Processing rm632_091.001_C00.01_DEFAULT_prd.rofs3.fpsx (CMT)...
rm632_091.001_C00.01_DEFAULT_prd.rofs3.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
PAPUBKEYS Hash for CMT: CCD9F80559BA50D9B3E274F9E7120BE1EE4EEA7C
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x0D100000-0x0E77FFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.219s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT SOS+ROFS3 Certificate...
Programming Status OK!
All blocks written OK! Time taken 1.344s
Flashing Speed: 52608,80 kBit/S
Processing rm632_091.001_C00.01_DEFAULT_prd.rofs3.fpsx (APE)...
Processing rm632_091.001_U001.000_prd.uda.fpsx (CMT)...
rm632_091.001_U001.000_prd.uda.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
PAPUBKEYS Hash for CMT: CCD9F80559BA50D9B3E274F9E7120BE1EE4EEA7C
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x0E780000-0x1F13FFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 4.703s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 5.656s
Flashing Speed: 35835,81 kBit/S
Processing rm632_091.001_U001.000_prd.uda.fpsx (APE)...
Restarting MCU...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
[Nokia E5-00 USB Phonet]: Port opened OK!
[Nokia E5-00 USB Phonet]: Port opened OK!
[Nokia E5-00 USB Phonet]: Port opened OK!
[Nokia E5-00 USB Phonet]: Port opened OK!
[Nokia E5-00 USB Phonet]: Port opened OK!
Factory defaults OK
Reading info...
[Nokia E5-00 USB Phonet]: Port opened OK!
MCU Version	V ICPR82_11w16.3.10
MCU Date	13-03-12
Product		RM-634 (NOkia E5-00)
Manufacturer	(c) Nokia
IMEI		357920042
Mastercode	3267503576
IMEI Spare	3A75290024928300
IMEI SV		3375290024928320F9000000
PSN		2647916AA
Product Code	059H582
Module Code	0204474
Basic Product Code	059H390
PSD		0000000000000000
LPSN		0
WLAN MAC	AC81F3FD32E8
APE SW		091.001
APE Variant	091.001091.001.41.01091.001.C00.01
APE Test		v0.034
APE HW		256
APE ADSP	256
RETU		35
TAHVO		00
AHNE		11
HW		3107
RFIC		|Vapaus_5.1 | Mikki_1.1
DSP		11w52
Simlock Server	SIMLOCK SERVER
Simlock Key	7223100000000000
Simlock Profile	0000000000000000
Simlock Key Cnt	0
Simlock FBUS Cnt	0
Simlock [1,1]	State: OPENED	Type: MCC-MNC	Data: 74402F
Simlock [2,1]	State: OPENED	Type: MCC-MNC	Data: 74402F
Simlock [3,1]	State: OPENED	Type: 3F007F206F07FFFF @ FC00	Data: 722310
Simlock [4,1]	State: OPENED	Type: 7FFF6F07FFFFFFFF @ FC00	Data: 722310
Simlock [5,1]	State: OPENED	Type: MCC-MNC	Data: 74810F
Simlock [6,1]	State: OPENED	Type: MCC-MNC	Data: 74810F
Simlock NCK	#pw+4jlg88860156793+7#
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!
 
Old 07-24-2012, 14:27   #2758 (permalink)
No Life Poster
 
renegade's Avatar
 
Join Date: Jan 2007
Location: Earth
Posts: 2,710
Member: 426389
Status: Offline
Thanks Meter: 2,356
Asha 201 CS repaired ok with cyclone box

After the client tried to reset NCK with free tool he came to me for repair as the phone got into contact service problem (as expected )

With cyclone everything went well at first try:
Code:
[Nokia USB Phonet]: Port opened OK!
MCU Version    V 11.56
MCU Date    26-03-12
Product        RM-799 (Nokia RM-799)
Manufacturer    (c) Nokia            
IMEI        35282905*******
Mastercode    412036367
IMEI Spare    3A2528097********
IMEI SV        332*********F4000000
PPM        V 11.56, 26-03-12, RM-799, (c) Nokia            , B1
CNT        Content: Orange RO sl, V 11.56, 26-03-12, RM-799, (c) Nokia            
PSN        26094F6BI
Product Code    059N7K6
Module Code    0205022
Basic Product Code    059J2K2
PSD        0000000000000000
LPSN        0
HW        2205
RFIC        97
LCD        TPO
BT        19e2-47026
Failed to read info -> Failed to read SP info
Repairing XGold2 Security Area...
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
Reading Security Block...
Security block OK and saved to "RM-799_35282905*******_7242012_155857.SecurityBlock.PM"
Repaired OK 
[Nokia USB Phonet]: Port opened OK!
MCU Version    V 11.56
MCU Date    26-03-12
Product        RM-799 (Nokia RM-799)
Manufacturer    (c) Nokia            
IMEI        35282905********
Mastercode    412036367
IMEI Spare    3A252809*******
IMEI SV        *********F4000000
PPM        V 11.56, 26-03-12, RM-799, (c) Nokia            , B1
CNT        Content: Orange RO sl, V 11.56, 26-03-12, RM-799, (c) Nokia            
PSN        26094F6BI
Product Code    059N7K6
Module Code    0205022
Basic Product Code    059J2K2
PSD        0000000000000000
LPSN        0
HW        2205
RFIC        Dummy RFIC version
LCD        TPO
BT        19e2-47026
Asic        11
HW Signature    9526D92C3C9B88C0
Simlock Server    SIMLOCK SERVER
Simlock Key    2261000000000000
Simlock Profile    800000000003000B
Simlock Aux    000B0000
Simlock IMEI    00003528290*******
Simlock Key Cnt    1
Simlock FBUS Cnt    0
Simlock [1,1]    State: CLOSED    Type: MCC-MNC    Data: 22610F
Reading SL3 LOG File...
[Nokia USB Phonet]: Port opened OK!
MCU Version    V 11.56
MCU Date    26-03-12
Product        RM-799 (Nokia RM-799)
Manufacturer    (c) Nokia            
IMEI        3528290*******
Mastercode    412036367
Then read LBF data ok for unlock:
Code:
Reading SL3 LOG File...
[Nokia USB Phonet]: Port opened OK!
MCU Version    V 11.56
MCU Date    26-03-12
Product        RM-799 (Nokia RM-799)
Manufacturer    (c) Nokia            
IMEI        35282905&*******
Mastercode    412036367
XGold213 Detected
Analyzing Profile Bits...
Phone can be NCK unlocked using KEYPAD
Phone can be NCK unlocked using FBUS
15 Digits NCK Found
Booting X-Gold via USB...
If PC Can't detect any new device, probably your phone is erased. Do following if needed:
1. Eject battery
2. Eject cable
3. Insert cable
4. Insert battery
5. Press power-on
[Nokia USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia USB Flashing Generic]: Port opened OK!
X-Gold: Ready, MCU ID Block: 1FB300020303010100FF
[PBL] : Ready
[EBL] : Mode CC
[EBL] : Quantum_Bootloader_2.5_M1S1
[EBL] : Ready
Setting Baudrate to 6500000bps...
Baudrate Accepted (6500000bps)
Flash Chip 0x00898982, Intel, Size: 64MBytes
Success!
Thanks Karwos for your hard work

BR
Renegade
 
The Following User Says Thank You to renegade For This Useful Post:
Old 07-25-2012, 13:53   #2759 (permalink)
No Life Poster
 
power_zone's Avatar
 
Join Date: Nov 2010
Location: Karachi pakistan
Posts: 575
Member: 1449003
Status: Offline
Sonork: tariq (100.1603714)
Thanks Meter: 38
Thumbs up Nokia C5 Star up falied (SOLVED)

1st see this thread...

http://forum.gsmhosting.com/vbb/f528...ailer-1510743/

Dear when customer give to me this set condition just hang on net nothing Others....
when i flash this mobile C5-00 V71 then this Error showing to me..



Delete Default File C5-00 V71.
2nd Second Step then Flash.

THANKS TO ALLLAH WHO GIVE ME THIS ABILITY TO SOLVE THIS PROBLEM...
 
Old 07-26-2012, 16:01   #2760 (permalink)
No Life Poster
 
dapx's Avatar
 
Join Date: Jun 2009
Location: Paraguay
Posts: 776
Member: 1064967
Status: Offline
Thanks Meter: 131
Unlock 7230 RM-598 Done!

Code:
[Nokia USB Phonet]: Port opened OK!
MCU Version	V 05.71
MCU Date	25-01-10
Product		RM-598 (Nokia 7230)
Manufacturer	(c) Nokia            
IMEI		3582590332
Mastercode	654373540
IMEI Spare	3A85520933722703
IMEI SV		3385520933722713F8000000
PPM		V 05.71, 25-01-10, RM-598, (c) Nokia            , L
CNT		Content: Telecom AR, V 05.71, 25-01-10, RM-598, (c) Nokia            , , 
PSN		GDL909401
Product Code	059B062
Module Code	0204402
Basic Product Code	0585709
PSD		0000000000000000
LPSN		0
RETU		40
TAHVO		00
AHNE		41
HW		2001
RFIC		|Vapaus_5.1 | Mikki_1.1
DSP		ICPR91_09w49_1
LCD		SEIKO
BT		1673-46034
Simlock Server	SIMLOCK SERVER
Simlock Key	7223400000000000
Simlock Profile	8000000000000000
Simlock Key Cnt	0
Simlock FBUS Cnt	0
Simlock [1,1]	State: CLOSED	Type: MCC-MNC	Data: 72234F
Sending BB5 NCK Code...
[Nokia USB Phonet]: Port opened OK!
NCK[7] - ACCEPTED
[Nokia USB Phonet]: Port opened OK!
MCU Version	V 05.71
MCU Date	25-01-10
Product		RM-598 (Nokia 7230)
Manufacturer	(c) Nokia            
IMEI		3582590332
Mastercode	654373540
IMEI Spare	3A85520933722703
IMEI SV		3385520933722713F8000000
PPM		V 05.71, 25-01-10, RM-598, (c) Nokia            , L
CNT		Content: Telecom AR, V 05.71, 25-01-10, RM-598, (c) Nokia            , , 
PSN		GDL909401
Product Code	059B062
Module Code	0204402
Basic Product Code	0585709
PSD		0000000000000000
LPSN		0
RETU		40
TAHVO		00
AHNE		41
HW		2001
RFIC		|Vapaus_5.1 | Mikki_1.1
DSP		ICPR91_09w49_1
LCD		SEIKO
BT		1673-46034
Simlock Server	SIMLOCK SERVER
Simlock Key	7223400000000000
Simlock Profile	8000000000000000
Simlock Key Cnt	0
Simlock FBUS Cnt	0
Simlock [1,1]	State: OPENED	Type: MCC-MNC	Data: 72234F
Simlock NCK	#pw+6s\t72656780916+7#
Unlock C3-00 RM-614 Done!

Code:
[Nokia C3-00 USB Phonet]: Port opened OK!
MCU Version	V 08.63
MCU Date	25-03-11
Product		RM-614 (Nokia C3-00)
Manufacturer	(c) Nokia            
IMEI		3597610408
Mastercode	7213434664
IMEI Spare	3A95670104885004
IMEI SV		3395670104885034F2000000
PPM		V 08.63, 25-03-11, RM-614, (c) Nokia            , L
CNT		Content: telecom AR SKD V2, V 08.63, 25-03-11, RM-614, (c) Nokia            
PSN		CGO897126
Product Code	059D9P7
Module Code	0204418
Basic Product Code	059D7P2
PSD		0000000000000000
LPSN		0
WLAN MAC	6CE907C7C652
HW		4000
RFIC		9
LCD		SEIKO
BT		4217-v529
Simlock Server	SIMLOCK SERVER
Simlock Key	7223400000000000
Simlock Profile	8000000000000000
Simlock Key Cnt	0
Simlock FBUS Cnt	0
Simlock [1,1]	State: CLOSED	Type: MCC-MNC	Data: 72234F
Sending BB5 NCK Code...
[Nokia C3-00 USB Phonet]: Port opened OK!
NCK[7] - ACCEPTED
[Nokia C3-00 USB Phonet]: Port opened OK!
MCU Version	V 08.63
MCU Date	25-03-11
Product		RM-614 (Nokia C3-00)
Manufacturer	(c) Nokia            
IMEI		3597610408
Mastercode	7213434664
IMEI Spare	3A95670104885004
IMEI SV		3395670104885034F2000000
PPM		V 08.63, 25-03-11, RM-614, (c) Nokia            , L
CNT		Content: telecom AR SKD V2, V 08.63, 25-03-11, RM-614, (c) Nokia            
PSN		CGO897126
Product Code	059D9P7
Module Code	0204418
Basic Product Code	059D7P2
PSD		0000000000000000
LPSN		0
WLAN MAC	6CE907C7C652
HW		4000
RFIC		9
LCD		SEIKO
BT		4217-v529
Simlock Server	SIMLOCK SERVER
Simlock Key	7223400000000000
Simlock Profile	8000000000000000
Simlock Key Cnt	0
Simlock FBUS Cnt	0
Simlock [1,1]	State: OPENED	Type: MCC-MNC	Data: 72234F
Simlock NCK	#pw+20†144421399413+7#
 
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
POST HERE all Successfull Report with Micro-Box, HTC cable, etc.. hitibiti Basic Micro-Box Software Support (SAMSUNG, HUAWEI, etc...) 2837 07-05-2020 10:10
Put in this thread all successfull story of Dct4 Imei???? with Mxkey mobilecitycbk MXKEY Nokia Flasher and Unlocker (by Alim Hape) 1 06-17-2009 21:28
Put in this thread all successfull UNLOCK AND NOT with Cyclone-box FullFLASHgSMPH Cyclonebox 2 04-13-2009 14:00

 



All times are GMT +1. The time now is 07:46.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.68820 seconds with 10 queries

SEO by vBSEO