nokia 106 spi problem - Page 2 - GSM-Forum

**wgmmmx1** · 10-12-2014, 00:04

Full you got in topic(if link not work ask topic creator by PM for it), can't do mcu/cnt/lang from it need use spi and special cable or soldering to pcb to write it to phone no other way now.

cobravio · 02-17-2015, 20:25

Quote:

Originally Posted by dazexy

seems finally solved... but please check my dump is correct or damaged. Many thanx:

https://www.dropbox.com/s/75vr3lnd6m..._FULL.zip?dl=0

dazexy

Share file NEED 106_FULL.zip

cobravio · 02-17-2015, 20:27

Quote:

Originally Posted by Advance-Box

Hi

Code:

Resetting ATF Box...
Initializing SPI Module...
Setting VCCIO Voltage...
SPI Module Initialized...
Clocks Sent...
Searching for an SPI Device...
SPI Device Found!

Manufacturer ID: 0x2C Micron
Device  ID          : 0xCB17
Flash Capacity   : 8388608 Bytes
Flash 64K Blocks: 128 Blocks
Unique ID           : 00002331501722007600311905138D01
Status Register  : 0x00

File Selected               : SPI_backup_Nokia_106_RM-962_FULL.bin
File Size                      : 8388608 bytes
Number of 64K Blocks: 128 blocks

Starting SPI Flash Write...

Write Protecting IMEI, PM and Simlocks Area

SPI Write Done!
Verifying Data...
Data Verification Success!

Total Elapsed Time 00:02:47

It's 100% OK Flash Dump.

B.R.

Plss share this firmware rm962 language EA I need it.thanks

flashmax · 12-28-2015, 00:09

Plss share this firmware rm962 language EA I need it.thanks

junior member · 05-06-2016, 05:42

Log show unique id empty, whats wrong ?
anyone experience this ? plz help..

log :

Manufacturer ID: 0xEF Winbond
Device ID : 0x6017
Flash Capacity : 8388608 Bytes
Flash 64K Blocks: 128 Blocks
Unique ID : <--- why empty ? dont understand.
Status Register : 0x00

Start Reading 128 Blocks...
ERROR: SPI Read Failed!

info :
i use atf nitro without modification
not connect pin 2 from box to flash ic, but vdd pin detect 1,8 to 1,99 volt
scan spi result not same at the time, always different
sometimes :

Manufacturer ID: 0x80
Device ID : 0x0000
Flash Capacity : 2 Bytes
Flash 64K Blocks: 0 Blocks
Unique ID :
Status Register : 0xC0

sometimes :

Manufacturer ID: 0xFF
Device ID : 0xE000
Flash Capacity : 2 Bytes
Flash 64K Blocks: 0 Blocks
Unique ID :
Status Register : 0xFF

10-12-2014, 00:04	#16 (permalink)
wgmmmx1 Moderator Join Date: Oct 2009 Location: Poland Age: 42 Posts: 10,174 Member: 1139057 Status: Offline Sonork: 100.109924 Thanks Meter: 4,428	Full you got in topic(if link not work ask topic creator by PM for it), can't do mcu/cnt/lang from it need use spi and special cable or soldering to pcb to write it to phone no other way now.

12-28-2015, 00:09	#19 (permalink)
flashmax Major Poster Join Date: Jan 2011 Location: Ukraine Posts: 47 Member: 1500821 Status: Offline Thanks Meter: 5	Plss share this firmware rm962 language EA I need it.thanks

05-06-2016, 05:42	#20 (permalink)
junior member Junior Member Join Date: Aug 2007 Posts: 23 Member: 565291 Status: Offline Thanks Meter: 7	Log show unique id empty, whats wrong ? anyone experience this ? plz help.. log : Manufacturer ID: 0xEF Winbond Device ID : 0x6017 Flash Capacity : 8388608 Bytes Flash 64K Blocks: 128 Blocks Unique ID : <--- why empty ? dont understand. Status Register : 0x00 Start Reading 128 Blocks... ERROR: SPI Read Failed! info : i use atf nitro without modification not connect pin 2 from box to flash ic, but vdd pin detect 1,8 to 1,99 volt scan spi result not same at the time, always different sometimes : Manufacturer ID: 0x80 Device ID : 0x0000 Flash Capacity : 2 Bytes Flash 64K Blocks: 0 Blocks Unique ID : Status Register : 0xC0 sometimes : Manufacturer ID: 0xFF Device ID : 0xE000 Flash Capacity : 2 Bytes Flash 64K Blocks: 0 Blocks Unique ID : Status Register : 0xFF