Iphone 6 camera problem( BLACKSCREEN ONLY) DONE - Page 4 - GSM-Forum

DoctorJO · 11-30-2016, 13:52

Quote:

Originally Posted by retrace

hi guys ! no need to desolder the IC. I just made a short between the 2 capacitors

Beetween which capasitors ?

Can you make a foto ?

I have iphone 6 Plus with black camera and no flash light.

U2301 was deleted, i cant make a jumper because of soldeer pads for U2301 is broken...

ninos22 · 12-02-2016, 11:03

Quote:

Originally Posted by DoctorJO

Beetween which capasitors ?

Can you make a foto ?

I have iphone 6 Plus with black camera and no flash light.

U2301 was deleted, i cant make a jumper because of soldeer pads for U2301 is broken...

C2301 - C2345 but this is not 100% right solution.

Pallle · 12-02-2016, 17:55

I have a iphone6 with rear camera not working. All voltages ok. Any solution?

sahbigsm · 12-09-2016, 18:05

Tested ok perfct
tested with 10 iphone6 all is ok working fine

malonzy2005 · 12-10-2016, 07:26

Quote:

Originally Posted by peppedb92

Thanx bro , after remove this ic no problem with itunes update? no error code ?

Did you tried with error 9

Sent from my iPhone using Tapatalk

neliocoelho · 01-06-2017, 17:33

hi,i have one iphone 6 plus back camera not work already try the jumper and check all voltages but still not working somebody solve this problem ?!
any other solution ?

jak2812 · 01-10-2017, 20:35

hi
somebody brought to me one iphone 6 with black screen cameras but i saw there is not u2301.
i did it the jumper and now i have rear camera but not flash light and the front camera is with black creen.
can anybody helps me with this?
thanks

aki786 · 03-18-2017, 07:55

Quote:

Originally Posted by bojaniste

hi,
i got a phone with both camera black screen…
i see that someone before ripped off the camera ic, so i was wondering if i could find the other ends of these 2 pins needed to make the jumper.

thank you

short the upper cap and the lower cap togather they're same connection..

gagan6 · 03-24-2017, 11:01

i have iphone 6 for camera problem i try jumper but no problem solve , any solution ?thanx

hanck · 03-30-2017, 13:25

Quote:

Originally Posted by aki786

short the upper cap and the lower cap togather they're same connection..

Hi, are you talking about this c2301 and c2345?? is this correct??

I have removed the chip U2301 and I can not put it back

look the ninos22 post, thanks

hanck · 03-31-2017, 13:21

I was thinking, why we can not use a resistor in series with the two capacitors?

it would be easy, and we'll have a proper voltage for the camera

Opinions?

short_toground · 03-31-2017, 16:21

Quote:

Originally Posted by hanck

I was thinking, why we can not use a resistor in series with the two capacitors?

it would be easy, and we'll have a proper voltage for the camera

Opinions?

Try it. Hopefully doesn't limit too much current needed for cameras

short_toground · 03-31-2017, 16:21

I have a 6 plus with this issue. Tried another ic tried the jumper but same, both cameras still black. Anyone have a fix?

hanck · 04-01-2017, 16:06

It works... just jump the pin.

in my case, both cameras and flash wasn't working. Now all works good.

The problem hovewer is, how long the cameras will works with this voltage?

tuanraja · 04-01-2017, 16:15

Quote:

Originally Posted by hanck

It works... just jump the pin.

in my case, both cameras and flash wasn't working. Now all works good.

The problem hovewer is, how long the cameras will works with this voltage?

the same thinking

12-02-2016, 17:55	#48 (permalink)
Pallle Freak Poster Join Date: Jan 2016 Location: Hungary Posts: 362 Member: 2515187 Status: Offline Thanks Meter: 114	I have a iphone6 with rear camera not working. All voltages ok. Any solution?

12-09-2016, 18:05	#49 (permalink)
sahbigsm Junior Member Join Date: Mar 2007 Posts: 9 Member: 465103 Status: Offline Thanks Meter: 0	Tested ok perfct tested with 10 iphone6 all is ok working fine

01-06-2017, 17:33	#51 (permalink)
neliocoelho Freak Poster Join Date: Feb 2006 Posts: 223 Member: 228717 Status: Offline Thanks Meter: 28	hi,i have one iphone 6 plus back camera not work already try the jumper and check all voltages but still not working somebody solve this problem ?! any other solution ?

01-10-2017, 20:35	#52 (permalink)
jak2812 No Life Poster Join Date: Oct 2002 Posts: 985 Member: 16943 Status: Offline Thanks Meter: 35	hi somebody brought to me one iphone 6 with black screen cameras but i saw there is not u2301. i did it the jumper and now i have rear camera but not flash light and the front camera is with black creen. can anybody helps me with this? thanks

03-24-2017, 11:01	#54 (permalink)
gagan6 Junior Member Join Date: Nov 2009 Location: kapurthala punjab Posts: 17 Member: 1161348 Status: Offline Thanks Meter: 1	i have iphone 6 for camera problem i try jumper but no problem solve , any solution ?thanx

03-31-2017, 13:21	#56 (permalink)
hanck Junior Member Join Date: Sep 2015 Posts: 13 Member: 2452969 Status: Offline Thanks Meter: 1	I was thinking, why we can not use a resistor in series with the two capacitors? it would be easy, and we'll have a proper voltage for the camera Opinions?

03-31-2017, 16:21	#58 (permalink)
short_toground No Life Poster Join Date: Jul 2016 Posts: 536 Member: 2598526 Status: Offline Thanks Meter: 52	I have a 6 plus with this issue. Tried another ic tried the jumper but same, both cameras still black. Anyone have a fix?

04-01-2017, 16:06	#59 (permalink)
hanck Junior Member Join Date: Sep 2015 Posts: 13 Member: 2452969 Status: Offline Thanks Meter: 1	It works... just jump the pin. in my case, both cameras and flash wasn't working. Now all works good. The problem hovewer is, how long the cameras will works with this voltage?