Post here success logs with RIFF JTAG Manager 1.64 and fw 1.41 - Page 8 - GSM-Forum

zinoubinabil · 10-11-2010, 17:16

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.14, JTAG Manager Version: 1.16
Selected Resurrector: [Samsung i710]

Connecting to the dead body...OK
Detected dead body ID: 0x79265013 - CORRECT!
Set I/O Voltage reads as 3.01V, TCK Frequency is 1 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0034 (128MB)
Flashing the dead body...OK
Resurrection complete!

mobileland · 10-11-2010, 17:17

mY DESIRE FINALLY FREE, O LEGIJAAAA, LEGIJAAAAAAA

)

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.14, JTAG Manager Version: 1.16
Selected Resurrector: [HTC Desire]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB)
Unlocking the Phone...OK
Unlock complete!

obaidi2005 · 10-11-2010, 21:20

thanks to riff team

htc t-mobile leo Repaired sucessfull 1024mb:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.13, JTAG Manager Version: 1.14
Selected Resurrector: [HTC HD2 (Leo)]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 8 MHz]
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00AD/0x55B3 (1024MB)
Flashing the dead body...OK
Resurrection complete!

Obeone13 · 10-12-2010, 12:42

S5233 Repair sucessfull
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.14, JTAG Manager Version: 1.16
Selected Resurrector: [Samsung S5230]

Connecting to the dead body...OK
Detected dead body ID: 0x07926F0F - CORRECT!
Set I/O Voltage reads as 2.99V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x00BA (256MB)
Flashing the dead body...OK
Resurrection complete!

Br
Obeone

paimai51 · 10-13-2010, 03:25

Quote:

Originally Posted by galijus

very nice,thanks

is it use USB or R45 cable ?

huzsolt · 10-13-2010, 10:06

HTC DESIRE unlock

Firmware Version: 1.14, JTAG Manager Version: 1.16
Open serial port...OK
Connecting to the RIFF Box...OK
Selected Resurrector: [HTC Desire]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB)
Unlocking the Phone...OK
Unlock complete!

desire.jpg

huzsolt · 10-13-2010, 14:35

HTC HD2 512m version UNLOCK done with the new resurrector:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.14, JTAG Manager Version: 1.16
Selected Resurrector: [HTC HD2 (Leo)]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00AD/0x55BC (512MB)
Unlocking the Phone...OK
Unlock complete!

Also flashing it with THIS version went OK.

huzsolt · 10-13-2010, 18:20

Quote:

Originally Posted by paimai51

is it use USB or R45 cable ?

You have to solder wires on PCB ... look at the picture 2 posts earlier.

barac_m · 10-13-2010, 23:53

barac_m · 10-13-2010, 23:54

Boshko_Alfa · 10-14-2010, 16:15

HTC Mega Unlock:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.15, JTAG Manager Version: 1.17
Selected Resurrector: [HTC Mega]

Connecting to the dead body...OK
Detected dead body ID: 0xC01B00E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB)
Unlocking the Phone...OK
Unlock complete!

fastes unlock ever in my life, less than 1sec. :/

TILLMANS · 10-15-2010, 03:36

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.15, JTAG Manager Version: 1.17
Selected Resurrector: [HTC Rhodium W]
Connecting to the dead body...OK
Detected dead body ID: 0x301000E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz]
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB)
Flashing the dead body...OK
Resurrection complete!

BesTCooL · 10-15-2010, 14:20

İ8910 PDa repaired

Please Wait For Load Flash ...
Detect Phone Connect ...
Connect Phone OK.
Send Header Info Complete.
Updata Partition Info ...
Please Wait Downlaod PDA Code ...
Updata Core ...
Updata Rofs1 ...
Updata Rofs2 ...
Updata Rofs3 ...
Updata Rofs4 ...
Updata Modem ...
Please Wait Process Modem Data ...
Write Modem ...
Update Flash OK!
Please Wait Phone Reboot Finished.
Total Time: 197.81 s

after repair HOLD
volume up + lock key + MENU buton u must see blue download LCD after upload flash...

deepakgarg · 10-17-2010, 13:25

htc snap selected same pinout as snap

barac_m · 10-18-2010, 15:32

10-13-2010, 10:06	#111 (permalink)
huzsolt No Life Poster Join Date: Jul 2004 Location: YODAFON Posts: 1,522 Member: 75392 Status: Offline Sonork: 100.81199 Thanks Meter: 136	HTC DESIRE unlock Firmware Version: 1.14, JTAG Manager Version: 1.16 Open serial port...OK Connecting to the RIFF Box...OK Selected Resurrector: [HTC Desire] Connecting to the dead body...OK Detected dead body ID: 0x202400E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB) Unlocking the Phone...OK Unlock complete! desire.jpg Last edited by huzsolt; 10-13-2010 at 10:47.

10-13-2010, 14:35	#112 (permalink)
huzsolt No Life Poster Join Date: Jul 2004 Location: YODAFON Posts: 1,522 Member: 75392 Status: Offline Sonork: 100.81199 Thanks Meter: 136	HTC HD2 512m version UNLOCK done with the new resurrector: Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.14, JTAG Manager Version: 1.16 Selected Resurrector: [HTC HD2 (Leo)] Connecting to the dead body...OK Detected dead body ID: 0x202400E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00AD/0x55BC (512MB) Unlocking the Phone...OK Unlock complete! Also flashing it with THIS version went OK. Last edited by huzsolt; 10-13-2010 at 14:51.

10-13-2010, 23:53	#114 (permalink)
barac_m Insane Poster Join Date: Apr 2007 Location: mother Serbia Age: 38 Posts: 62 Member: 488048 Status: Offline Thanks Meter: 57	Samsung S8500

10-13-2010, 23:54	#115 (permalink)
barac_m Insane Poster Join Date: Apr 2007 Location: mother Serbia Age: 38 Posts: 62 Member: 488048 Status: Offline Thanks Meter: 57	HTC HD2 unlock

10-15-2010, 03:36	#117 (permalink)
TILLMANS Freak Poster Join Date: Oct 2006 Location: usa Posts: 184 Member: 372836 Status: Offline Thanks Meter: 13	complete Resurrection Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.15, JTAG Manager Version: 1.17 Selected Resurrector: [HTC Rhodium W] Connecting to the dead body...OK Detected dead body ID: 0x301000E1 - CORRECT! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB) Flashing the dead body...OK Resurrection complete!

10-11-2010, 17:16	#106 (permalink)
zinoubinabil Product Supporter Join Date: Sep 2004 Location: In the right way Posts: 2,748 Member: 84268 Status: Offline Sonork: 100.114149 Thanks Meter: 2,569	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.14, JTAG Manager Version: 1.16 Selected Resurrector: [Samsung i710] Connecting to the dead body...OK Detected dead body ID: 0x79265013 - CORRECT! Set I/O Voltage reads as 3.01V, TCK Frequency is 1 MHz Resurrection sequence started. Establish communication with the phone...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0034 (128MB) Flashing the dead body...OK Resurrection complete!

10-11-2010, 17:17	#107 (permalink)
mobileland No Life Poster Join Date: Feb 2003 Location: www.X-SIM.me Age: 45 Posts: 2,424 Member: 22955 Status: Offline Sonork: 67574 - Not use it Thanks Meter: 584	mY DESIRE FINALLY FREE, O LEGIJAAAA, LEGIJAAAAAAA ) Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.14, JTAG Manager Version: 1.16 Selected Resurrector: [HTC Desire] Connecting to the dead body...OK Detected dead body ID: 0x202400E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB) Unlocking the Phone...OK Unlock complete!

10-12-2010, 12:42	#109 (permalink)
Obeone13 Freak Poster Join Date: Apr 2005 Location: Place One Age: 49 Posts: 335 Member: 132758 Status: Offline Thanks Meter: 16	S5233 Repair sucessfull Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.14, JTAG Manager Version: 1.16 Selected Resurrector: [Samsung S5230] Connecting to the dead body...OK Detected dead body ID: 0x07926F0F - CORRECT! Set I/O Voltage reads as 2.99V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x00BA (256MB) Flashing the dead body...OK Resurrection complete! Br Obeone

10-14-2010, 16:15	#116 (permalink)
Boshko_Alfa No Life Poster Join Date: Mar 2007 Location: Skopje, Macedonia Age: 36 Posts: 4,244 Member: 472933 Status: Offline Sonork: 100.1590967 Thanks Meter: 1,331	HTC Mega Unlock: Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.15, JTAG Manager Version: 1.17 Selected Resurrector: [HTC Mega] Connecting to the dead body...OK Detected dead body ID: 0xC01B00E1 - CORRECT! Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB) Unlocking the Phone...OK Unlock complete! fastes unlock ever in my life, less than 1sec. :/

10-15-2010, 14:20	#118 (permalink)
BesTCooL No Life Poster Join Date: Dec 2002 Location: TURKEY Age: 44 Posts: 3,285 Member: 18442 Status: Offline Sonork: 111110 Thanks Meter: 622	İ8910 PDa repaired Please Wait For Load Flash ... Detect Phone Connect ... Connect Phone OK. Send Header Info Complete. Updata Partition Info ... Please Wait Downlaod PDA Code ... Updata Core ... Updata Rofs1 ... Updata Rofs2 ... Updata Rofs3 ... Updata Rofs4 ... Updata Modem ... Please Wait Process Modem Data ... Write Modem ... Update Flash OK! Please Wait Phone Reboot Finished. Total Time: 197.81 s after repair HOLD volume up + lock key + MENU buton u must see blue download LCD after upload flash...

10-17-2010, 13:25	#119 (permalink)
deepakgarg No Life Poster Join Date: Jan 2006 Location: Chandigarh,India Age: 40 Posts: 5,790 Member: 220603 Status: Offline Thanks Meter: 1,164	htc tmobile dash unlocked htc snap selected same pinout as snap

10-18-2010, 15:32	#120 (permalink)
barac_m Insane Poster Join Date: Apr 2007 Location: mother Serbia Age: 38 Posts: 62 Member: 488048 Status: Offline Thanks Meter: 57	HTC Tattoo