GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   RIFFBOX (https://forum.gsmhosting.com/vbb/f634/)
-   -   Samsung Galaxy TAB P1000 Dead Boot Done w/ RIFF (https://forum.gsmhosting.com/vbb/f634/samsung-galaxy-tab-p1000-dead-boot-done-w-riff-1224367/)

jomafi 01-20-2011 14:35

Look here: http://forum.gsmhosting.com/vbb/f634...eeded-1190446/

Aamir_Zia 01-20-2011 18:08

well i got it before your posting .

Tab is OK now ... how do i get my Old IMEI back ?

::gsmcoder:: 02-16-2011 17:08

Successfully repaired 3 dead p1000 galaxy tab via resurrection
 
Really wonderful box riff is, having problem uplaoding screenshot

somehow a sunday unlocker tried to use odin and phone when dead..boot erase, make jtag testpoints and worked like charm on 3 pieces


note

p1000 galaxy tab failed on 8 mhz, worked better on 1

thanks to riff team

ramhard 02-23-2011 17:52

p1000
 
1 Attachment(s)
p1000 repair dead galxi tab 100000000%

samusprime 03-04-2011 23:22

Galaxy tab issue.....
 
Galaxy tab P1000N, can be repaired with riff???

samusprime 03-05-2011 04:10

hello..... this P1000N latin american model can be repaired with rifff

MPhoneClinic 03-05-2011 04:44

give with a go, no harm....

saeed-gsm 03-08-2011 17:27

p1000 problem dead after repair boot
 
i have a p1000 when power on show erorr but need repair boot when boot repair my phone not power on and not going to download mode not show any thing how repair my phone

deepakgarg 03-09-2011 02:58

without log or screenshot its difficult to help

armin666 03-09-2011 12:51

dcc loder need boot p1000

::gsmcoder:: 03-09-2011 13:43

repair again all repair boxes ticked

gsm_alvin 03-10-2011 19:24

Samsung Galaxy TAB P1000 Dead Boot Done w/ RIFF
 
Samsung Galaxy TAB dead boot revive by RIFF JTAG

Heres the pinout
http://img823.imageshack.us/img823/5663/83900584.jpg

Open the unit and solder the wire according to the pin out
http://img688.imageshack.us/img688/5949/69260458.jpg

Open the software and connect the phone to the box, choose proper model as shown

then hit the RESURRECTION Button on the lower right side of the program
http://img824.imageshack.us/img824/2498/78638608.jpg

It will read the info of the attached phone and will pop out a small dialog box

for "resurrection setting" Select PBL to USE and hit the Continue Button
http://img835.imageshack.us/img835/2981/13916125.jpg

Wait untill finish
http://img88.imageshack.us/img88/2708/76366176.jpg

Finished Flashing
http://img849.imageshack.us/img849/4069/26405833.jpg

Assemble the unit and test for DOWNLOAD MODE by pressing volume down and power on

If the phone Succesfully BOOT UP you can now proceed flashing via ODIN

Open ODIN multiflasher and load the PIT, PDA, MODEM, and CSC. Then connect phone

Once detected hit the START on your ODIN software. Wait till finish.
http://img815.imageshack.us/img815/4007/79015568.jpg

Phone while flashing with ODIN
http://img189.imageshack.us/img189/789/75627647.jpg

Complete Flashing
http://img219.imageshack.us/img219/7851/72224330.jpg

TEST PHONE
http://img821.imageshack.us/img821/3158/59369880.jpg

ENJOY.

yusufali786 03-11-2011 10:37

nice tutorial bro.....

fertxter 03-13-2011 08:27

http://img27.imageshack.us/img27/696...jobclipart.gif

activic 03-13-2011 23:57

I had the same thing bricked my galaxy
now cannot get it on download mode !!!!!

I dont know how to solve it ?
any help is appreciated


All times are GMT +1. The time now is 17:52.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.13114 seconds with 6 queries

SEO by vBSEO