Samsung Galaxy TAB P1000 Dead Boot Done w/ RIFF-ok-ok
 

Samsung Galaxy TAB P1000 Dead Boot Done w/ RIFF-ok-ok :D
P1_20100909.pit
GT-P1000-CSC-TNLJK1.tar.md5
MODEM_P1000XXJID.tar.md5
P1000BOJJ3-REV03-ALL-CL664187.tar.md5
Odin3 v1.7

Riff team come in please
 

I repair P1000 dead boot erro:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.21, JTAG Manager Version: 1.29
Selected Resurrector: [Samsung Galaxy Tab]
Connecting to the dead body...OK
Detected dead body ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.80V, TCK Frequency is 8 MHz
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0050 (512MB)
Flashing the dead body...
ERROR: Failed due to multiple communication errors. Terminating at 0x00000000
why?

In Case of first picture and Tab was recognized by PC only flash PIT-File to go into Bootloader-Mode or flash complete 3-File-Firmware. Jtaging is not neccessary;)

galaxy tab successfully revived!!!
 

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.20, JTAG Manager Version: 1.27
Selected Resurrector: [Samsung Galaxy Tab]

Connecting to the dead body...OK
Detected dead body ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.79V, TCK Frequency is 18 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0050 (512MB)
Flashing the dead body...OK
ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK
Resurrection complete!



thanks riff box!!

what file did u use in odin for flashing?

Use PDA and don’t extract file from Rar,zip….

DOWNLOADER:

Odin Multi Downloader v1.7 & 1.82 - I9000, I9003, I9010, I9020, I9023, P1000

FIRMWARE:

EURO
P1000XWJMI
P1000XWJMK

.PIT File


ASIA
P1000DXKM2 with PIT File
P1000ZTKC1 with PIT File


br

RNC_EBM
PASS:836697d9d39d5b1e3dc16

i used odin 1.17 and flash file from z3x support... contrary to what mr FUN said, i extracted the rar file downloaded from z3x and flashed the it with phone, pda and csc

after that MONEY IN THE BANK!!!!

@c8387811
have u solved the problem? can u pls share how? as i too am facing the same problem!

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.22, JTAG Manager Version: 1.30
Selected Resurrector: [Samsung Galaxy Tab]

Connecting to the dead body...OK
Detected dead body ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.79V, TCK Frequency is 1 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0050 (512MB)
Flashing the dead body...
ERROR: Failed due to multiple communication errors. Terminating at 0x00000000

any help from moderators will be appreciated!
WBR
ReyTech.

try with battery + usb cable

need dcc for p1000
 

hi guys
please help me i need dcc for galaxy tab p1000 main & spare

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.16, JTAG Manager Version: 1.29
Selected Resurrector: [Samsung Galaxy Tab]

Connecting to the dead body...OK
Detected dead body ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.81V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...FAILED
ERROR: Wrong DCC data checksum.

Hi,
What You want to do with the phone ?

doesn't work! the same error!
Wbr
reytech