Post here succesfull JTAG and eMMC operations with Easy-Jtag: - Page 9 - GSM-Forum

..::Rizwan::.. · 09-16-2013, 13:30

Connecting to Target...
JTAG device: BCM28155
CPU IDCODE : 0x4BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x4
CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A9
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting emmc memory parameters of bank (0) ...
EMMC #0 : ID : 0x01000015 Name : AW1G8M Size : 7.8 GB
EMMC #1 : ID : 0x01000015 Name : AW1G8M Size : 2.1 MB
eMMC flash device(s) found, Device ID : 0x00150000
NAND Writing BOOT, PIT, MD5...
eMMC Write OK! Elapsed time: 24.546875s (41.716 KiB/s)
NAND Writing CAL...
eMMC Write OK! Elapsed time: 20.861328s (49.086 KiB/s)
NAND Writing SYSPARAM...
eMMC Write OK! Elapsed time: 6.359375s (40.256 KiB/s)
NAND Writing PARM_SPML...
eMMC Write OK! Elapsed time: 5.390625s (47.490 KiB/s)
NAND Writing RF_CAL...
eMMC Write OK! Elapsed time: 5.609375s (45.638 KiB/s)
NAND Writing SBL1...
eMMC Write OK! Elapsed time: 54.026367s (37.907 KiB/s)
NAND Writing PARAM...
eMMC Write OK! Elapsed time: 21.752930s (29.421 KiB/s)
NAND Writing DTS...
eMMC Write OK! Elapsed time: 10.175781s (50.316 KiB/s)
NAND Writing ROM2...
eMMC Write OK! Elapsed time: 42.770508s (47.883 KiB/s)
All Done.

dicle_gsm · 09-17-2013, 15:50

i8150 boot repaİr done !!

Quote:

user: 1477 485 f:\easy_jtag_manager\easyjtag\src\helper\command.c :922 "jim_echo"() : Initialising: Samsung gt-i8150 config ver.:1.00
i/o level set to : 2200 mv
box s/n: 1818 ,fw ver.: 01.47
connecting to target...
Warn: Jtag device: Msm8255
cpu idcode : 0x27b360e1 mfg.: 0x070, part: 0x7b36, ver.: 0x2
warn: Cpu manufacturer: Qualcomm , cpu name: Msm8255 scorpion rev 2.0
halting cpu...
Initialize hardware...
Starting target communication...
Warn: Detecting emmc memory parameters of bank (0) ...

Emmc #0 : Id : 0x00000045 name : Sem04g size : 10 gb
error: Emmc flash device(s) found, device id : 0x00450000
nand writing gpt...
Warn: Emmc write ok! Elapsed time: 0.640625s (99.902 kib/s)

nand writing dbl...
Warn: Emmc write ok! Elapsed time: 6.031250s (74.280 kib/s)

nand writing osbl...
Warn: Emmc write ok! Elapsed time: 15.390625s (66.534 kib/s)

nand writing aboot...
Warn: Emmc write ok! Elapsed time: 29.671875s (69.022 kib/s)

all done.

MasterDuke · 09-18-2013, 00:38

YEAHHH !! Thats so nice !!

Code:

Successefuly connected to box on COM15
Box S/N: 0E0E081FE87939E9, ,FW Ver.: 01.47
Loading eMMC Addon Firmware...
CMD Pullup Level:1144 mV
CMD Active Level:1670 mV
EMMC CID 1501004D41473247410085067772CF13
EMMC CSD D02701320F5903FFF6DBFFFF8A404007
EMMC Manufactorer ID: 15
EMMC OEM ID: 0100
EMMC Date: 12/2012 FW rev.0x0 HW rev.0x0
EMMC Serial #: 2231793522
EMMC NAME: MAG2GA
EMMC Capacity: 15028 MB (High Density Card)

Loading eMMC Addon Firmware...
CMD Pullup Level:1144 mV
CMD Active Level:1670 mV
EMMC CID 1501004D41473247410085067772CF13
EMMC CSD D02701320F5903FFF6DBFFFF8A404007
EMMC Manufactorer ID: 15
EMMC OEM ID: 0100
EMMC Date: 12/2012 FW rev.0x0 HW rev.0x0
EMMC Serial #: 2231793522
EMMC NAME: MAG2GA
EMMC Capacity: 15028 MB (High Density Card)
Writing 00200000 bytes to 00000000 ...ROM2
Write Speed: 187 kB/s
Done !!!

BIG THX TO BLANG And all the other peaple how make this happend

gr33tz duke

..::Rizwan::.. · 09-22-2013, 11:38

Writing file...E:\Easy Jtag Files\G Grand Dump\128MB.bin
Successefuly connected to box on COM14
Box S/N: XXXXXXXXXXXXXX, ,FW Ver.: 01.47
Loading eMMC Addon Firmware...
CMD Pullup Level:2155 mV
CMD Active Level:2650 mV
EMMC CID 1501004D384731574100AF0E1A18408F
EMMC CSD D02701320F5903FFF6DBFFE18E404029
EMMC Manufactorer ID: 15
EMMC OEM ID: 0100
EMMC Date: 04/1997 FW rev.0x0 HW rev.0x0
EMMC Serial #: 2936936984
EMMC NAME: M8G1WA
EMMC Capacity: 7456 MB (High Density Card)
Writing 08000000 bytes to 00000000 ...ROM1
Write Speed: 247 kB/s
Done !!!

**...:::::NP™:::::...** · 09-24-2013, 12:36

Code:

EasyJtag Suite ver.: 1.0.69.0 started.
Operating system ver.: Windows XP (build 2600, Service Pack 3).
For support and updates visit http://easy-jtag.com
Initialising: SAMSUNG GT-S5250 Config ver.:1.00
I/O Level set to : 3000 mV
Box S/N: xxxxxxxxxxxxxx ,FW Ver.: 01.47
Connecting to Target...
JTAG device: BCM2133 
CPU IDCODE : 0x07926F0F Mfg.: 0x787, Part: 0x7926, Ver.: 0x0
CPU Manufacturer: Samsung , CPU Name: BCM21331
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting nand memory parameters ...
NAND flash device ID:00EC:0050 'NAND 512MB 1.8V 16-bit (Samsung)' found
NAND geometry: Blocks:00000800, Page size:4096 bytes , Block size:64 pages
NAND Writing BOOT...
NAND Write OK! Elapsed time: 7.875000s (268.190 KiB/s)
NAND Writing MP...
NAND Write OK! Elapsed time: 0.453125s (582.621 KiB/s)
All Done.

Bro:- Palash Ahammad

Dr_Wolodya · 09-26-2013, 13:17

Repair Samsung A747:

Code:

EasyJtag Suite ver.: 1.0.70.0 started.
Operating system ver.: Windows 7 (build 7601, Service Pack 1).
For support and updates visit http://easy-jtag.com
Initialising: Samsung A747 Config ver.:1.00
I/O Level set to : 2600 mV
Box S/N: xxx ,FW Ver.: 01.47
Connecting to Target...
JTAG device: MSM6XXX 
CPU IDCODE : 0x100DF0E1 Mfg.: 0x070, Part: 0x00df, Ver.: 0x1
CPU Manufacturer: QUALCOMM , CPU Name: Unknown
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting nand memory parameters ...
NAND flash device ID:00EC:0079 'NAND 128MB 3.3V 8-bit (Samsung)' found
NAND geometry: Blocks:00002000, Page size:512 bytes , Block size:32 pages
Writing memory from file...D:\Samsung\A747\A747_BOOT.bin
NAND Write OK! Elapsed time: 41.927074s (100.746 KiB/s)

tawheeddon · 09-26-2013, 15:58

http://forum.gsmhosting.com/vbb/f672...ml#post9761583

amit kanpur · 09-26-2013, 21:17

samsung s5830 boot repair done by easy-jtag........

Uploaded with ImageShack.us

tawheeddon · 09-27-2013, 15:35

Quote:

Originally Posted by amit kanpur

samsung s5830 boot repair done by easy-jtag........

Uploaded with ImageShack.us

should it need extra power supply

tawheeddon · 09-27-2013, 19:05

Connecting to Target...
JTAG device: MSM7225A
CPU IDCODE : 0x00000000 Mfg.: 0x000, Part: 0x0000, Ver.: 0x0
Halting CPU...
Target not halted ;-(
Using EasyRepair Mode...
Warning , you are using custom pinout config make shure that NRST and GND on proper places!
Checking repair data...
EasyJtag Suite ver.: 1.0.71.1 started.
Operating system ver.: Windows XP (build 2600, Service Pack 3).
For support and updates visit http://easy-jtag.com
Initialising: Samsung GT-S7562 Config ver.:1.01
I/O Level set to : 2600 mV
Box S/N: ********** ,FW Ver.: 01.47
Connecting to Target...
JTAG device: MSM7225A
CPU IDCODE : 0x00000000 Mfg.: 0x000, Part: 0x0000, Ver.: 0x0
Halting CPU...
Target not halted ;-(in download mode shows product {blank}

NoName® · 09-27-2013, 22:02

Quote:

Originally Posted by tawheeddon

Connecting to Target...
JTAG device: MSM7225A
CPU IDCODE : 0x00000000 Mfg.: 0x000, Part: 0x0000, Ver.: 0x0
Halting CPU...
Target not halted ;-(
Using EasyRepair Mode...
Warning , you are using custom pinout config make shure that NRST and GND on proper places!
Checking repair data...
EasyJtag Suite ver.: 1.0.71.1 started.
Operating system ver.: Windows XP (build 2600, Service Pack 3).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: Samsung GT-S7562 Config ver.:1.01
I/O Level set to : 2600 mV
Box S/N: ********** ,FW Ver.: 01.47
Connecting to Target...
JTAG device: MSM7225A
CPU IDCODE : 0x00000000 Mfg.: 0x000, Part: 0x0000, Ver.: 0x0
Halting CPU...
Target not halted ;-(in download mode shows product {blank}

Hi , answer are inside your question ;-)

tawheeddon · 09-28-2013, 07:46

C:\Program Files\Z3X\EASYJTAG\Pinouts\s7562

tawheeddon · 09-28-2013, 10:31

Start Z3X Jtag Pin Finder...
Successefuly connected to box on COM31
Waiting for box reset...
Box S/N:********
Box Working Mode: JTAG Pin Finder.
Start Z3X Jtag Pin Finder...
Stage 1: Search TCK / TMS / TDI / TDO...
JTAG Pinout not found...
Box S/N:********* ,FW Ver.: 01.47
Box Working Mode: JTAG Box.
Start Z3X Jtag Pin Finder...
Successefuly connected to box on COM31
Waiting for box reset...
Box S/N:**********
Box Working Mode: JTAG Pin Finder.
Start Z3X Jtag Pin Finder...
Stage 1: Search TCK / TMS / TDI / TDO...
Get IDCODE...
JTAG Pinout Found: TCK: Pin 17 / TMS: Pin 12 / TDI: Pin 18 / TDO: Pin 15
CPU IDCODE : 0x106230E1 Mfg.: 0x070, Part: 0x0623, Ver.: 0x1
CPU Manufacturer: QUALCOMM , CPU Name: Unknown
Stage 2: Search TRST...
TRST Pin Found: TRST: Pin 15
Box S/N: *********, ,FW Ver.: 01.47
Box Working Mode: JTAG Box.
Using EasyRepair Mode...
Warning , you are using custom pinout config make shure that NRST and GND on proper places!
Checking repair data...
EasyJtag Suite ver.: 1.0.71.1 started.
Operating system ver.: Windows XP (build 2600, Service Pack 3).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: Samsung GT-S7562 Config ver.:1.01
I/O Level set to : 2600 mV
Box S/N: *********** ,FW Ver.: 01.47
Connecting to Target...
Done with error(s)...
Using EasyRepair Mode...
Warning , you are using custom pinout config make shure that NRST and GND on proper places!
Checking repair data...
EasyJtag Suite ver.: 1.0.71.1 started.
Operating system ver.: Windows XP (build 2600, Service Pack 3).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: Samsung GT-S7562 Config ver.:1.01
I/O Level set to : 2600 mV
Box S/N: *********** ,FW Ver.: 01.47
Connecting to Target...
Done with error(s)...

tawheeddon · 09-28-2013, 10:44

Box S/N: **************
Box Working Mode: JTAG Pin Finder.
Start Z3X Jtag Pin Finder...
Stage 1: Search TCK / TMS / TDI / TDO...
Get IDCODE...
JTAG Pinout Found: TCK: Pin 17 / TMS: Pin 12 / TDI: Pin 18 / TDO: Pin 15
CPU IDCODE : 0x106230E1 Mfg.: 0x070, Part: 0x0623, Ver.: 0x1
CPU Manufacturer: QUALCOMM , CPU Name: Unknown
Stage 2: Search TRST...
TRST Pin Found: TRST: Pin 15
Box S/N: **************, ,FW Ver.: 01.47
Box Working Mode: JTAG Box.

AFTER THAT I GONE TO easy repair
load file
run easy repair
Box S/N:************
Box Working Mode: JTAG Pin Finder.
Start Z3X Jtag Pin Finder...
Stage 1: Search TCK / TMS / TDI / TDO...
Get IDCODE...
JTAG Pinout Found: TCK: Pin 17 / TMS: Pin 12 / TDI: Pin 18 / TDO: Pin 15
CPU IDCODE : 0x106230E1 Mfg.: 0x070, Part: 0x0623, Ver.: 0x1
CPU Manufacturer: QUALCOMM , CPU Name: Unknown
Stage 2: Search TRST...
TRST Pin Found: TRST: Pin 15
Box S/N: ************, ,FW Ver.: 01.47
Box Working Mode: JTAG Box.
Using EasyRepair Mode...
Warning , you are using custom pinout config make shure that NRST and GND on proper places!
Checking repair data...
EasyJtag Suite ver.: 1.0.56.0 started.
Operating system ver.: Windows XP (build 2600, Service Pack 3).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: Samsung GT-S7562 Config ver.:1.01
I/O Level set to : 2600 mV
Box S/N: ********** ,FW Ver.: 01.47
Connecting to Target...
Script Parsing Error...

..::Rizwan::.. · 09-29-2013, 13:17

Connecting to Target...
JTAG device: MSM8225
CPU IDCODE : 0x007700E1 Mfg.: 0x070, Part: 0x0770, Ver.: 0x0
CPU Manufacturer: QUALCOMM , CPU Name: Unknown
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting emmc memory parameters of bank (0) ...
EMMC #0 : ID : 0x014A0090 Name : XINYH Size : 3.6 G , (7569408) Blocks
EMMC #1 : ID : 0x014A0090 Name : XINYH Size : 2.0 M , (4096) Blocks
eMMC flash device(s) found, Device ID : 0x0090004a
NAND Writing DBL...
eMMC Write OK! Elapsed time: 9.731445s (26.306 KiB/s)
NAND Writing OSBL...
eMMC Write OK! Elapsed time: 10.140625s (63.112 KiB/s)
NAND Writing HTC...
eMMC Write OK! Elapsed time: 18.585938s (110.191 KiB/s)
NAND Writing MISC...
eMMC Write OK! Elapsed time: 6.090820s (42.030 KiB/s)
NAND Writing SPL...
eMMC Write OK! Elapsed time: 15.156250s (67.563 KiB/s)
NAND Writing SPLASH1...
eMMC Write OK! Elapsed time: 11.036133s (92.786 KiB/s)
NAND Writing RECOVERY...
eMMC Write OK! Elapsed time: 55.174805s (78.877 KiB/s)
NAND Writing BOOT...
eMMC Write OK! Elapsed time: 48.151367s (85.065 KiB/s)
NAND Writing WLAN...
eMMC Write OK! Elapsed time: 1.291015s (198.294 KiB/s)
All Done.

09-16-2013, 13:30	#121 (permalink)
..::Rizwan::.. No Life Poster Join Date: May 2008 Location: P@Ki$t@n Posts: 3,165 Member: 777415 Status: Offline Sonork: 1589702 Thanks Meter: 1,420	GT- I9082 Galaxy Grand Boot Repair Done Connecting to Target... JTAG device: BCM28155 CPU IDCODE : 0x4BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x4 CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A9 Halting CPU... Initialize hardware... Starting target communication... Detecting emmc memory parameters of bank (0) ... EMMC #0 : ID : 0x01000015 Name : AW1G8M Size : 7.8 GB EMMC #1 : ID : 0x01000015 Name : AW1G8M Size : 2.1 MB eMMC flash device(s) found, Device ID : 0x00150000 NAND Writing BOOT, PIT, MD5... eMMC Write OK! Elapsed time: 24.546875s (41.716 KiB/s) NAND Writing CAL... eMMC Write OK! Elapsed time: 20.861328s (49.086 KiB/s) NAND Writing SYSPARAM... eMMC Write OK! Elapsed time: 6.359375s (40.256 KiB/s) NAND Writing PARM_SPML... eMMC Write OK! Elapsed time: 5.390625s (47.490 KiB/s) NAND Writing RF_CAL... eMMC Write OK! Elapsed time: 5.609375s (45.638 KiB/s) NAND Writing SBL1... eMMC Write OK! Elapsed time: 54.026367s (37.907 KiB/s) NAND Writing PARAM... eMMC Write OK! Elapsed time: 21.752930s (29.421 KiB/s) NAND Writing DTS... eMMC Write OK! Elapsed time: 10.175781s (50.316 KiB/s) NAND Writing ROM2... eMMC Write OK! Elapsed time: 42.770508s (47.883 KiB/s) All Done.

09-22-2013, 11:38	#124 (permalink)
..::Rizwan::.. No Life Poster Join Date: May 2008 Location: P@Ki$t@n Posts: 3,165 Member: 777415 Status: Offline Sonork: 1589702 Thanks Meter: 1,420	Galaxy Grand EMMC Direct Falshing Done Writing file...E:\Easy Jtag Files\G Grand Dump\128MB.bin Successefuly connected to box on COM14 Box S/N: XXXXXXXXXXXXXX, ,FW Ver.: 01.47 Loading eMMC Addon Firmware... CMD Pullup Level:2155 mV CMD Active Level:2650 mV EMMC CID 1501004D384731574100AF0E1A18408F EMMC CSD D02701320F5903FFF6DBFFE18E404029 EMMC Manufactorer ID: 15 EMMC OEM ID: 0100 EMMC Date: 04/1997 FW rev.0x0 HW rev.0x0 EMMC Serial #: 2936936984 EMMC NAME: M8G1WA EMMC Capacity: 7456 MB (High Density Card) Writing 08000000 bytes to 00000000 ...ROM1 Write Speed: 247 kB/s Done !!!

09-26-2013, 15:58	#127 (permalink)
tawheeddon Junior Member Join Date: Oct 2010 Posts: 33 Member: 1430565 Status: Offline Thanks Meter: 0	please help s7562.how to connect http://forum.gsmhosting.com/vbb/f672...ml#post9761583

09-27-2013, 19:05	#130 (permalink)
tawheeddon Junior Member Join Date: Oct 2010 Posts: 33 Member: 1430565 Status: Offline Thanks Meter: 0	whats the problem Connecting to Target... JTAG device: MSM7225A CPU IDCODE : 0x00000000 Mfg.: 0x000, Part: 0x0000, Ver.: 0x0 Halting CPU... Target not halted ;-( Using EasyRepair Mode... Warning , you are using custom pinout config make shure that NRST and GND on proper places! Checking repair data... EasyJtag Suite ver.: 1.0.71.1 started. Operating system ver.: Windows XP (build 2600, Service Pack 3). For support and updates visit http://easy-jtag.com Initialising: Samsung GT-S7562 Config ver.:1.01 I/O Level set to : 2600 mV Box S/N: ********** ,FW Ver.: 01.47 Connecting to Target... JTAG device: MSM7225A CPU IDCODE : 0x00000000 Mfg.: 0x000, Part: 0x0000, Ver.: 0x0 Halting CPU... Target not halted ;-(in download mode shows product {blank}

09-28-2013, 07:46	#132 (permalink)
tawheeddon Junior Member Join Date: Oct 2010 Posts: 33 Member: 1430565 Status: Offline Thanks Meter: 0	but i am using easy jtag pinouts digram C:\Program Files\Z3X\EASYJTAG\Pinouts\s7562

09-26-2013, 21:17	#128 (permalink)
amit kanpur No Life Poster Join Date: May 2009 Location: kanpur Age: 35 Posts: 2,443 Member: 1033905 Status: Offline Sonork: amitsharma Thanks Meter: 892	samsung s5830 boot repair done by easy-jtag........ Uploaded with ImageShack.us

09-28-2013, 10:31	#133 (permalink)
tawheeddon Junior Member Join Date: Oct 2010 Posts: 33 Member: 1430565 Status: Offline Thanks Meter: 0	Now connecting is ok but error please help somebody ,because support is sleeping Start Z3X Jtag Pin Finder... Successefuly connected to box on COM31 Waiting for box reset... Box S/N:****** Box Working Mode: JTAG Pin Finder. Start Z3X Jtag Pin Finder... Stage 1: Search TCK / TMS / TDI / TDO... JTAG Pinout not found... Box S/N:***** ,FW Ver.: 01.47 Box Working Mode: JTAG Box. Start Z3X Jtag Pin Finder... Successefuly connected to box on COM31 Waiting for box reset... Box S/N:****** Box Working Mode: JTAG Pin Finder. Start Z3X Jtag Pin Finder... Stage 1: Search TCK / TMS / TDI / TDO... Get IDCODE... JTAG Pinout Found: TCK: Pin 17 / TMS: Pin 12 / TDI: Pin 18 / TDO: Pin 15 CPU IDCODE : 0x106230E1 Mfg.: 0x070, Part: 0x0623, Ver.: 0x1 CPU Manufacturer: QUALCOMM , CPU Name: Unknown Stage 2: Search TRST... TRST Pin Found: TRST: Pin 15 Box S/N: *****, ,FW Ver.: 01.47 Box Working Mode: JTAG Box. Using EasyRepair Mode... Warning , you are using custom pinout config make shure that NRST and GND on proper places! Checking repair data... EasyJtag Suite ver.: 1.0.71.1 started. Operating system ver.: Windows XP (build 2600, Service Pack 3). For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device. Initialising: Samsung GT-S7562 Config ver.:1.01 I/O Level set to : 2600 mV Box S/N: ******* ,FW Ver.: 01.47 Connecting to Target... Done with error(s)... Using EasyRepair Mode... Warning , you are using custom pinout config make shure that NRST and GND on proper places! Checking repair data... EasyJtag Suite ver.: 1.0.71.1 started. Operating system ver.: Windows XP (build 2600, Service Pack 3). For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device. Initialising: Samsung GT-S7562 Config ver.:1.01 I/O Level set to : 2600 mV Box S/N: ********* ,FW Ver.: 01.47 Connecting to Target... Done with error(s)...

09-28-2013, 10:44	#134 (permalink)
tawheeddon Junior Member Join Date: Oct 2010 Posts: 33 Member: 1430565 Status: Offline Thanks Meter: 0	This is pinfinder times log Box S/N: ************ Box Working Mode: JTAG Pin Finder. Start Z3X Jtag Pin Finder... Stage 1: Search TCK / TMS / TDI / TDO... Get IDCODE... JTAG Pinout Found: TCK: Pin 17 / TMS: Pin 12 / TDI: Pin 18 / TDO: Pin 15 CPU IDCODE : 0x106230E1 Mfg.: 0x070, Part: 0x0623, Ver.: 0x1 CPU Manufacturer: QUALCOMM , CPU Name: Unknown Stage 2: Search TRST... TRST Pin Found: TRST: Pin 15 Box S/N: **********, ,FW Ver.: 01.47 Box Working Mode: JTAG Box. AFTER THAT I GONE TO easy repair load file run easy repair Box S/N:******** Box Working Mode: JTAG Pin Finder. Start Z3X Jtag Pin Finder... Stage 1: Search TCK / TMS / TDI / TDO... Get IDCODE... JTAG Pinout Found: TCK: Pin 17 / TMS: Pin 12 / TDI: Pin 18 / TDO: Pin 15 CPU IDCODE : 0x106230E1 Mfg.: 0x070, Part: 0x0623, Ver.: 0x1 CPU Manufacturer: QUALCOMM , CPU Name: Unknown Stage 2: Search TRST... TRST Pin Found: TRST: Pin 15 Box S/N: ********, ,FW Ver.: 01.47 Box Working Mode: JTAG Box. Using EasyRepair Mode... Warning , you are using custom pinout config make shure that NRST and GND on proper places! Checking repair data... EasyJtag Suite ver.: 1.0.56.0 started. Operating system ver.: Windows XP (build 2600, Service Pack 3). For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device. Initialising: Samsung GT-S7562 Config ver.:1.01 I/O Level set to : 2600 mV Box S/N: ******** ,FW Ver.: 01.47 Connecting to Target... Script Parsing Error...

09-29-2013, 13:17	#135 (permalink)
..::Rizwan::.. No Life Poster Join Date: May 2008 Location: P@Ki$t@n Posts: 3,165 Member: 777415 Status: Offline Sonork: 1589702 Thanks Meter: 1,420	HTC Desire X Boot Repair Done Connecting to Target... JTAG device: MSM8225 CPU IDCODE : 0x007700E1 Mfg.: 0x070, Part: 0x0770, Ver.: 0x0 CPU Manufacturer: QUALCOMM , CPU Name: Unknown Halting CPU... Initialize hardware... Starting target communication... Detecting emmc memory parameters of bank (0) ... EMMC #0 : ID : 0x014A0090 Name : XINYH Size : 3.6 G , (7569408) Blocks EMMC #1 : ID : 0x014A0090 Name : XINYH Size : 2.0 M , (4096) Blocks eMMC flash device(s) found, Device ID : 0x0090004a NAND Writing DBL... eMMC Write OK! Elapsed time: 9.731445s (26.306 KiB/s) NAND Writing OSBL... eMMC Write OK! Elapsed time: 10.140625s (63.112 KiB/s) NAND Writing HTC... eMMC Write OK! Elapsed time: 18.585938s (110.191 KiB/s) NAND Writing MISC... eMMC Write OK! Elapsed time: 6.090820s (42.030 KiB/s) NAND Writing SPL... eMMC Write OK! Elapsed time: 15.156250s (67.563 KiB/s) NAND Writing SPLASH1... eMMC Write OK! Elapsed time: 11.036133s (92.786 KiB/s) NAND Writing RECOVERY... eMMC Write OK! Elapsed time: 55.174805s (78.877 KiB/s) NAND Writing BOOT... eMMC Write OK! Elapsed time: 48.151367s (85.065 KiB/s) NAND Writing WLAN... eMMC Write OK! Elapsed time: 1.291015s (198.294 KiB/s) All Done.