GSM-Forum - SD Card Unbrick Solution by Easy-JTAG Manual

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- Easy-Jtag / Easy-Jtag Plus (https://forum.gsmhosting.com/vbb/f672/)

- - SD Card Unbrick Solution by Easy-JTAG Manual (https://forum.gsmhosting.com/vbb/f672/sd-card-unbrick-solution-easy-jtag-manual-1891346/)

is this suitable for n7100 ?

sd card imaging tool targate drive not shown in easy jtag any body know how to solve this problem

Run as Administrator

Anyone have TP location i9500 ?

will SD card process works on A700fd?
Anyone Tested?

will SD card process works on SAMSUNG G532G?

good update easy jtag

Quote:

Originally Posted by dharyadi (Post 12914675)

will SD card process works on SAMSUNG G532G?

No not work on MTk Phones.:cool:

any body have C900f zbin ?

i need samsung sm-g530h/ds zbin file please help.zbin file not support area.

Quote:

Originally Posted by gjalvarez (Post 10933971)

When writing the micro sd I am getting this error, can anyone help me?

Compression thread encountered exception: "Exception of type Compression Exception thrown, cause buffer error (-5)"

Also, how can I know when do I need to use it? I mean what error is giving the phone?

Thank you

I have same problem even a few more...
Already done:
1. Redownloaded BIN file from Support files. Twice. via shell. will try with torrent next.
2. Before WRITE SD card with ZBIN FIlE, READED SD card... (solved only that got different error)
3. Used diffrent cards 3. Kingston, SAndisk, Toshiba.
4. Used external and internal card readers, external universal, internal, not working at all.

Still have problems. First was the Buffer error -5.
Now its shows up another error. INCORRECT PARAMETER.
Im using Windows 10, 64Bits. Build 17134.rs4_release.180410-1804
Installed z3X soft in english, and using in english, i do prefer russian anyway, but to avoid any problem with char encoding because im using Portuguese language in Windows, and encoding works with error in russian. and somehow some parts of soft show up correctly in russian. im not sure if its good or bad x)

Screenshots below:

1. Buffer error:
http://i66.tinypic.com/14w8yyq.jpg

2. Incorrect parameter:
http://i67.tinypic.com/2rx8mcj.jpg

While using this small handy tool found many small bugs.
1. When click on Format, nothing heppends or shows up. Next moment card bocomes unacessible via windows explorer and not active. After reconnecting the same SD card with Z3X software running card will not show up anywhere. If you replug the card with closed software, it will be correctly regonised and work as usual, and it will still remain untoched, so by observation, FORMAT button does not work at all. tested with 3 different vendors of sd cards, and different sizes, 2GB 16 and 32. all the same result. software running as administrator.

2. not important, cosmetic bug, but still confuses alot. WHen you are creating .ZBIN file from .BIN the process runs and when it finishes, you have a pop up saying that "SD CARD OPERATION FINISHED" that does not make sense, there was no opearion with SDCARD but, only that info confuses alot because after some time you are not sure, if you really pressed read, write or create ZBIN? For ex. when it heppend to me i was AFK for 15min and when came back to check, i was sure that I made SDCARD, and ready to go, and actually it was only ZBIN file ready x/ . so somebody can simply do the same process twise or skip any other thinking that its already done.

3. Would be awesome to see somewhere what process is currently running while working (READING/WRITING/CONVERTING/FORMATTING)

4. What for we need to see Internal hard drives of out pc? just hide them? no need to show them IMO.

Quote:

Originally Posted by gjalvarez (Post 10933971)

I have this problems too

is any way with easy jtag pluss to bypass micro sd card to export user data? like jpeg audio and other files ?
some way to read from dead micro sd card like expensive tools can do
like vnr from multicom

Urgent help, need unbrick img for SM-N900K using sdcard method

I have hard brick galaxy note 3 due to flash wrong NHLOS partition /mmcblk0p1 , now it cannot enter bootloader mode/downloader mode
If phone plugs in PC, it recognized as Qualcomm HS-USB QLoader 9008 (com7)

Can I use USB dongle jig to enable download mode ?
Can I use 301k Ohm SMT resistor type instead of 4bands color resistor type ?

It is not working.

https://dl.xda-developers.com/thumbs.../2/4576222.jpg
https://dl.xda-developers.com/thumbs.../3/4576223.jpg

Help please,....THANKS

p/S: lasted ROM SM-N900K_20150304_N900KKKU0GOC4_N900KKTT0GOC4_5.0

thnx it good step, i like easy jtag

Problem with making Easy JTAG magicd SD

Quote:

Originally Posted by blang (Post 10731714)

EasyJTAG Magic SD Card Tool Operation Manual

Here are the instruction on creating recovery sd-card and boot sd-card to recover bricked Samsung Phones in case your phone got broken.*Before doing this, if your device are detected by usb as Qualcomm HS-USB QDLoader 9008 ( If you device are EXYNOS MCU Based it not need to be detected by USB at all)

Creating MAGIC CARD from ZBIN Image.

1. Download both PIT and ZBIN files for yor phone from support area.
2. Insert clean formatted SD Card in USB SD Card Reader
3. Run EasyJTAG Software and select SD Image Plugin
4. Select ZBIN file for creating recovery card by clicking button
5. Select yur SD card in drives list. And click button.
6. After few seconds magic SD card will be done. Close plugin and remove it from reader

Recovery Phone by SD Unbrick card

1. Insert SD Card in phone SD card slot and attach battery
2. Put phone in Download mode by USB-JIC either by keyboard combination ( make sure that you have used file with newer firmware than current phone firmware. If you don't know what firmware have ben in phone before software damage – just use latest zbin file from support!)
3. If phone go in ODIN mode, download firmware with same version as in ZBIN file e.g if you used
4. Samsung_GT-I9200_I9200XXUDNE4_GPT_UEFI.zbin you should use I9200XXUDNE4 firmware or newer one.
5. Flash phone with ODIN with PIT file!
6. Repair Done;

Creating MAGIC CARD from BIN Dump

If your phone have more actual firmware version than ZBIN file on support or you have unsupported phone – you can make ZBIN file by yourself from BINary dump ( eMMC Direct Dump or ADB Full Dump)

1. Run EasyJTAG Software and select SD Image Plugin
2. Select (128mbt DUMP)BIN* file for creating recovery card by clicking button
3. Click [Convert From BIN] button
4. After operation complete you will get ZBIN and PIT file in source folder.

• Different Platforms requires different ROM parts for Magic SD

I have a Samsung J500F/DS and ZBIN file isn't exist in Easy support . I have a dump file :
EMMC_ROM1_00000000_20000000 j500f-ds.bin
EMMC_ROM2_00000000_00400000 j500f-ds.bin
EMMC_ROM3_00000000_00400000 j500f-ds.bin
1-Which file we should use for making Magic SD card?
2-Do I need to make short test point before use magic card?
If Yes. were is the test point?
:confused:
Thanks in advance

I need help, please help me.

i dont have easy-jtag

can i solved 9008 qualcomm in g530m?

Quote:

Originally Posted by .:MobileLife:. (Post 10732848)

If hardware would be not fix means if have emmc damage can't be fix any box need to change emmc and most of problem no product name emmc fault.

t

tnx bro for sharing,, less time consume to solve emmc fault

this metode support for new devices 2019 above on

Dear all members plz suggest to me I want to buy
A new emmc box in which is best 1-ufi.2-easy jtag plus...... (My choice is easy jtag plus)

thank you very much.
i do all steps
but when i write flash with odin the operation fail error pit