New version Sim-emu 4.00 - GSM-Forum

simemu · 04-04-2002, 07:34

The pages of SIM-EMU are:

http://www.ciberia.ya.com/simemu
http://perso.wanadoo.es/djabif
http://www.meigo.com/simemu

News

. Management of the Sim-Emu through menus of the phone (if it supports it)
. Change of number without powering off the phone (nonvalid in some phones)
. Option of RESET to ask for PIN again (if the change without powering off does not work)
. Management of the 8 telephone numbers from menu (Creation and erasure)
. Configuration of the SMS's from menu in english (use SIM_EMU_FL_4.00_ENG.hex)
. Possibility of assigning a description to each occupied position
. Query of the current number with the associate description
. Query of the actual configuration (actives SMS/ADN and phone numbers)
. Information of version and author with Web sites and email

NOTICE
This version requires that the SIM_EMU_EP_4.00.hex file is recorded since it is incompatible with the external EEPROM of previous versions.
For this reason it is necessary, to conserve the data of the phonebook and SMS's, to do saves of these data in the PC with scripts that I offer.
After the programming and established the wished number of SMS's, to recover the saved data also with scripts.

Once recorded the HEX's files as they come in the ZIP, in addition to the previous procedures to configure the Sim-Emu, now is possible to do it from the menus of the phone.

The menus are structured in the following way:

Sim-Emu 4.00

1) Nr.Tel/SMS
2) Information
3) Reset

The option 1) serves to configure the Sim-Emu and has the following options:

1.1) Sel.Nr.Tel.
Allows to change the position to anyone of the active ones.

1.2) Edit Nr.
Allows to assign a description of up to 12 characters to the actual position.

1.3) Config.Pos.
Allows to configure the indicated position with the IMSI/KI/PUK and PIN data.
By security, first it asks for the PIN of the power on and then the Position, IMSI, KI, PUK, and PIN. Been worth which each one of these data is correct, not allowing to continue with the following one until the present one is correct.

Position: a number between 1 and 8

IMSI: a number with length of 18 decimal digits, first 2 always "08"

KI: a number with length of 32 hexadecimal digits (0 - 9 and To - F capital)

PUK: a number with length of 8 digits decimal (0 - 9)

PINn: a number with length between 4 and 8 digits decimal (0 - 9)

1.4) Config.SMS
Allows to configure the amount of SMS and size of phonebook with the same equivalences that in version 3.00.
By security, first it asks for the PIN of the power on and then the amount of wished SMS's, a number between 20 and 40.

1.5) Erase Pos.
Allows to eliminate the indicated position.
By security, first it asks for the PIN of the power on and then the position that is wanted to eliminate, a number from 1 to 8 except the one of the current position.

[b]The option 2) give us information about the Sim-Emu and has the following options:

2.1) Actual Nr
Show us the selected number with its associated description.

2.2) Configuration
Shows us the present configuration of the Sim-Emu.
For example, if we have 20 SMS and the positions 1, 2 and 4 actives, display the following:

SMS/ADN: 20/250 Nr.Activos: 12-4----

2.3) Version
Shows us the version of the Sim-Emu.

2.4) Author
Shows us the name of the author, the Web sites and email where to find me.

The option 3) allows us to reset the phone to request the PIN

Notes
The option of change of position does not work correctly on all the telephones, for example the Nokia require that a search of networks is made and others take too much in making the change, reason why I recommend to use the Reset option.

The option of Reset is not useful in some versions of Nokia 3310, since phone, INCORRECTLY resend the last PIN introduced, reason why does not serve us to change of PIN.
I recommend to use in the Nokia with this problem the sequence *3370# that makes a complete Reset.

Like advantage of the Nokia phones, the change of the position is always allowed even though the phone is not free for all providers.
In the Trium it happens the same.

You can eliminate all the SMS's, LEAVING INTACT the PHONEBOOK, if you reconfigure the amount of SMS's with the same value.

It is not necessary to power off the phone whenever a change is made in the configuration.
The program determines when it is necessary to reset it and it does it automatictly.

Thanks and sorry for my poor english

masterross · 04-04-2002, 08:51

sounds good

Alf · 04-04-2002, 08:52

Great WORK!!!

)))

Beerman · 04-04-2002, 13:50

Great works Daniel, keep it on

I am gonna to test 4.0 with Siemens S45 now and will give the results inside this topic.

Beerman · 04-04-2002, 14:37

Quote:

Originally posted by Beerman
I am gonna to test 4.0 with Siemens S45 now and will give the results inside this topic.

OK. It seems to work just fine with S45, using SAT feauture without any problems (great thing).
But just like on 3.0 version - the card crashes ("Card Error"). It crashed it last hour :
1 - one time when changing the phone position using SAT
2 - two times after starting the phone
3- one time when i recived and was reading the incoming SMS

If you will fix this Siemens incomatibility probelm in a future realase, the soft will be PERFECT !!!

asykgsm · 04-04-2002, 16:42

Hello , Simenu:
First thanks for your developing this wonderful project!
And thanks for release it totally free!!
One this you have to know..
In Taiwan,some peopple steal this kind of project to make money!
They sold this project more than USD$100
I want to translate your page to chinese and let people know
everyone can do this easily .
May i get your issue to do this??
And hope you can release simenu4 asap!!
Best regards and soory for my poor english!

Eurocrypt · 04-04-2002, 17:05

Hi Simemu!
Looks like a masterpiece this one to.

I checked it fast and it looks to me as if Offset for
Language byte is set as in ("SimEmu 3.00" Offset - 8 )...
Could this be correct??
If so, is it the same relation between
SMS Center number´s location to.

brgds Eurocrypt

Programmer · 04-04-2002, 17:49

Hi Daniel,
welcome to this forum

Good work! I like some new features of your SIMEMU but I would miss the Network Info (already present in my GSM SIM emulator). Also the INCREASE command could be VERY helpful for people using prepaid cards where the Operators are using ACM functions. I have this feature included in my version as well and it works fine so let me know if you need my help.

I have also updated card switching functionality - works good on N6210 - number change from SIM Toolkit menu is really ONLINE if I change two numbers of the same Operator. No full SIM card reset is necessary in this case at all. Switch between Operators works also good but it takes more time and may not work correctly on some phones - I have similar experiences like you described here.

Eurocrypt · 04-04-2002, 18:36

Shifting between Serivceprovider working like a dream
with my Ericsson T65,
Fantastic Emu this one :-)

rgds Eurocrypt

simemu · 04-05-2002, 01:44

Quote:

Originally posted by Eurocrypt
Hi Simemu!
Looks like a masterpiece this one to.

I checked it fast and it looks to me as if Offset for
Language byte is set as in ("SimEmu 3.00" Offset - 8 )...
Could this be correct??
If so, is it the same relation between
SMS Center number´s location to.

brgds Eurocrypt

The Language byte offset is correct, but there are 8 SMS center numbers at positions 90, B0, D0, F0, 110, 130, 150 and 170.

Regards Daniel

Eurocrypt · 04-05-2002, 02:48

THX Daniel:
I have looked a bit deeper into it now and found
out the positions.
I´ve added Language and SMS-centernumber editing
in my tool now, is it OK for You if I Publish it ?

(No more Embedded files, now.
and Link´s to Your HP´s inside proggie)

rgds Euro

simemu · 04-05-2002, 03:03

Quote:

Originally posted by Eurocrypt
THX Daniel:
I have looked a bit deeper into it now and found
out the positions.
I´ve added Language and SMS-centernumber editing
in my tool now, is it OK for You if I Publish it ?

(No more Embedded files, now.
and Link´s to Your HP´s inside proggie)

rgds Euro

No problem, but tell me which is your page to test it.
Regards Daniel

simemu · 04-05-2002, 03:16

Quote:

Originally posted by asykgsm
Hello , Simenu:
First thanks for your developing this wonderful project!
And thanks for release it totally free!!
One this you have to know..
In Taiwan,some peopple steal this kind of project to make money!
They sold this project more than USD$100
I want to translate your page to chinese and let people know
everyone can do this easily .
May i get your issue to do this??
And hope you can release simenu4 asap!!
Best regards and soory for my poor english!

Yes, of course.
Is the GSM used in Taiwan ?

Regards

simemu · 04-05-2002, 03:26

Quote:

Originally posted by Programmer
Hi Daniel,
welcome to this forum Good work! I like some new features of your SIMEMU but I would miss the Network Info (already present in my GSM SIM emulator). Also the INCREASE command could be VERY helpful for people using prepaid cards where the Operators are using ACM functions. I have this feature included in my version as well and it works fine so let me know if you need my help. I have also updated card switching functionality - works good on N6210 - number change from SIM Toolkit menu is really ONLINE if I change two numbers of the same Operator. No full SIM card reset is necessary in this case at all. Switch between Operators works also good but it takes more time and may not work correctly on some phones - I have similar experiences like you described here.

As I said you later, the INCREASE command is not used in Spain, but I'll try to include it in the GreenCard versions for other countries.

Do you know if are there problems with some providers of Poland and Italy with the SL45 due missing of this command ?

Thanks and regards

Beerman · 04-05-2002, 03:39

Hi there

I have 3 numbers on one silver emulated by Sim-Emu and i am using it with Siemens S45 as you know

I discovered something strange. One of those 3 numbers has GPRS activated and it works just fine. But when i change this number using SAT Menu (without reseting the card) and return back again (also using SAT), GPRS in not availible. I need to reset the card and activate this number using a normal way (by enetring the correct PIN).
Oh yeah, and the last portion of complaining abount sponteneus card failures

. Now i must to present the 'sad but true' thing - the card is gettin' "..errored" very, very often

- while reading SMSes, making a phonecall (or after hanging out), a few seconds after turning on the phone and also in most unexpected situations (for example just while ideling, in a normal stand-by time).
Meaby there are some other users of Sim-Emu 4.0 and Siemens S/ME45 and can confirm those problems with "Card Error". Meaby my phone is failing ?

--
Best regards
Beerman
[email protected]

04-04-2002, 07:34	#1 (permalink)
simemu No Life Poster Join Date: Apr 2002 Location: Spain Age: 62 Posts: 855 Member: 10582 Status: Offline Thanks Meter: 99	New version Sim-Emu 4.00 The pages of SIM-EMU are: http://www.ciberia.ya.com/simemu http://perso.wanadoo.es/djabif http://www.meigo.com/simemu News . Management of the Sim-Emu through menus of the phone (if it supports it) . Change of number without powering off the phone (nonvalid in some phones) . Option of RESET to ask for PIN again (if the change without powering off does not work) . Management of the 8 telephone numbers from menu (Creation and erasure) . Configuration of the SMS's from menu in english (use SIM_EMU_FL_4.00_ENG.hex) . Possibility of assigning a description to each occupied position . Query of the current number with the associate description . Query of the actual configuration (actives SMS/ADN and phone numbers) . Information of version and author with Web sites and email NOTICE This version requires that the SIM_EMU_EP_4.00.hex file is recorded since it is incompatible with the external EEPROM of previous versions. For this reason it is necessary, to conserve the data of the phonebook and SMS's, to do saves of these data in the PC with scripts that I offer. After the programming and established the wished number of SMS's, to recover the saved data also with scripts. Once recorded the HEX's files as they come in the ZIP, in addition to the previous procedures to configure the Sim-Emu, now is possible to do it from the menus of the phone. The menus are structured in the following way: Sim-Emu 4.00 1) Nr.Tel/SMS 2) Information 3) Reset The option 1) serves to configure the Sim-Emu and has the following options: 1.1) Sel.Nr.Tel. Allows to change the position to anyone of the active ones. 1.2) Edit Nr. Allows to assign a description of up to 12 characters to the actual position. 1.3) Config.Pos. Allows to configure the indicated position with the IMSI/KI/PUK and PIN data. By security, first it asks for the PIN of the power on and then the Position, IMSI, KI, PUK, and PIN. Been worth which each one of these data is correct, not allowing to continue with the following one until the present one is correct. Position: a number between 1 and 8 IMSI: a number with length of 18 decimal digits, first 2 always "08" KI: a number with length of 32 hexadecimal digits (0 - 9 and To - F capital) PUK: a number with length of 8 digits decimal (0 - 9) PINn: a number with length between 4 and 8 digits decimal (0 - 9) 1.4) Config.SMS Allows to configure the amount of SMS and size of phonebook with the same equivalences that in version 3.00. By security, first it asks for the PIN of the power on and then the amount of wished SMS's, a number between 20 and 40. 1.5) Erase Pos. Allows to eliminate the indicated position. By security, first it asks for the PIN of the power on and then the position that is wanted to eliminate, a number from 1 to 8 except the one of the current position. [b]The option 2) give us information about the Sim-Emu and has the following options: 2.1) Actual Nr Show us the selected number with its associated description. 2.2) Configuration Shows us the present configuration of the Sim-Emu. For example, if we have 20 SMS and the positions 1, 2 and 4 actives, display the following: SMS/ADN: 20/250 Nr.Activos: 12-4---- 2.3) Version Shows us the version of the Sim-Emu. 2.4) Author Shows us the name of the author, the Web sites and email where to find me. The option 3) allows us to reset the phone to request the PIN Notes The option of change of position does not work correctly on all the telephones, for example the Nokia require that a search of networks is made and others take too much in making the change, reason why I recommend to use the Reset option. The option of Reset is not useful in some versions of Nokia 3310, since phone, INCORRECTLY resend the last PIN introduced, reason why does not serve us to change of PIN. I recommend to use in the Nokia with this problem the sequence 3370# that makes a complete Reset. Like advantage of the Nokia phones, the change of the position is always allowed even though the phone is not free for all providers. In the Trium it happens the same. You can eliminate all the SMS's, LEAVING INTACT the PHONEBOOK, if you reconfigure the amount of SMS's with the same value.* It is not necessary to power off the phone whenever a change is made in the configuration. The program determines when it is necessary to reset it and it does it automatictly. Thanks and sorry for my poor english Last edited by simemu; 04-05-2002 at 01:09.

04-04-2002, 13:50	#4 (permalink)
Beerman Crazy Poster Join Date: Feb 2002 Location: Poland Age: 57 Posts: 55 Member: 9777 Status: Offline Thanks Meter: 0	Re: New version Sim-Emu 4.00 Great works Daniel, keep it on I am gonna to test 4.0 with Siemens S45 now and will give the results inside this topic.

04-05-2002, 03:39	#15 (permalink)
Beerman Crazy Poster Join Date: Feb 2002 Location: Poland Age: 57 Posts: 55 Member: 9777 Status: Offline Thanks Meter: 0	Hi there I have 3 numbers on one silver emulated by Sim-Emu and i am using it with Siemens S45 as you know I discovered something strange. One of those 3 numbers has GPRS activated and it works just fine. But when i change this number using SAT Menu (without reseting the card) and return back again (also using SAT), GPRS in not availible. I need to reset the card and activate this number using a normal way (by enetring the correct PIN). Oh yeah, and the last portion of complaining abount sponteneus card failures . Now i must to present the 'sad but true' thing - the card is gettin' "..errored" very, very often - while reading SMSes, making a phonecall (or after hanging out), a few seconds after turning on the phone and also in most unexpected situations (for example just while ideling, in a normal stand-by time). Meaby there are some other users of Sim-Emu 4.0 and Siemens S/ME45 and can confirm those problems with "Card Error". Meaby my phone is failing ? -- Best regards Beerman [email protected] Last edited by Beerman; 04-05-2002 at 03:42.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New version SIM-EMU 6.00 for GreenCard 2/GreenCard/SilverCard (RELEASED)	simemu	Sim Cloning and Scaning	217	11-17-2020 07:00
New version SIM-EMU 6.00 for GreenCard 2	simemu	Sim Cloning and Scaning	140	04-27-2012 07:27
New Version!!! Sim-Emu (16 in 1)	swinaky	Sim Cloning and Scaning	11	06-09-2005 07:42
New version SIM-EMU 5.00 for GreenCard	simemu	Sim Cloning and Scaning	45	04-06-2003 22:39
New revision SIM-EMU 4.01	simemu	Sim Cloning and Scaning	54	06-20-2002 06:49

04-04-2002, 08:51	#2 (permalink)
masterross No Life Poster Join Date: Mar 2001 Location: Earth Posts: 919 Member: 3506 Status: Offline Thanks Meter: 6	sounds good

04-04-2002, 08:52	#3 (permalink)
Alf No Life Poster Join Date: Sep 2001 Location: Portugal Age: 49 Posts: 692 Member: 6156 Status: Offline Thanks Meter: 3	Great WORK!!! )))

04-04-2002, 16:42	#6 (permalink)
asykgsm Junior Member Join Date: Mar 2002 Posts: 23 Member: 10088 Status: Offline Thanks Meter: 0	Hello , Simenu: First thanks for your developing this wonderful project! And thanks for release it totally free!! One this you have to know.. In Taiwan,some peopple steal this kind of project to make money! They sold this project more than USD$100 I want to translate your page to chinese and let people know everyone can do this easily . May i get your issue to do this?? And hope you can release simenu4 asap!! Best regards and soory for my poor english!

04-04-2002, 17:05	#7 (permalink)
Eurocrypt Freak Poster Join Date: Feb 2002 Location: At home Posts: 165 Member: 9602 Status: Offline Thanks Meter: 5	Hi Simemu! Looks like a masterpiece this one to. I checked it fast and it looks to me as if Offset for Language byte is set as in ("SimEmu 3.00" Offset - 8 )... Could this be correct?? If so, is it the same relation between SMS Center number´s location to. brgds Eurocrypt

04-04-2002, 17:49	#8 (permalink)
Programmer Junior Member Join Date: Feb 2002 Location: Czech Republic Posts: 39 Member: 9589 Status: Offline Thanks Meter: 0	Hi Daniel, welcome to this forum Good work! I like some new features of your SIMEMU but I would miss the Network Info (already present in my GSM SIM emulator). Also the INCREASE command could be VERY helpful for people using prepaid cards where the Operators are using ACM functions. I have this feature included in my version as well and it works fine so let me know if you need my help. I have also updated card switching functionality - works good on N6210 - number change from SIM Toolkit menu is really ONLINE if I change two numbers of the same Operator. No full SIM card reset is necessary in this case at all. Switch between Operators works also good but it takes more time and may not work correctly on some phones - I have similar experiences like you described here.

04-04-2002, 18:36	#9 (permalink)
Eurocrypt Freak Poster Join Date: Feb 2002 Location: At home Posts: 165 Member: 9602 Status: Offline Thanks Meter: 5	Shifting between Serivceprovider working like a dream with my Ericsson T65, Fantastic Emu this one :-) rgds Eurocrypt

04-05-2002, 02:48	#11 (permalink)
Eurocrypt Freak Poster Join Date: Feb 2002 Location: At home Posts: 165 Member: 9602 Status: Offline Thanks Meter: 5	THX Daniel: I have looked a bit deeper into it now and found out the positions. I´ve added Language and SMS-centernumber editing in my tool now, is it OK for You if I Publish it ? (No more Embedded files, now. and Link´s to Your HP´s inside proggie) rgds Euro