vocano scan pinput mtk very slow (read post number 62) - GSM-Forum

binharmani · 03-06-2012, 14:13

vocano scan pinput mtk very slow

Volcano Updated: 2012-03-02
Connecting...
Connection successful,connected state!
Version: V3.8
SN:001-619-535
Port:COM11
Detecting rx and tx...
Vcc: null
Gnd: null
Detection initiated, connect the phone and power on it...
Individual phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient...
Failed to detect.
Detecting rx and tx...
Vcc: 18
Gnd: 19 21
Detection initiated, connect the phone and power on it...
Individual phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient...
User stop
Detecting rx and tx...
Vcc: null
Gnd: 4 5
Detection initiated, connect the phone and power on it...
Individual phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient...
User stop
Detecting rx and tx...
Vcc: 18
Gnd: 21 23
Detection initiated, connect the phone and power on it...
Individual phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient...
MT6235, RX: 20, TX: 24, Pull down: 22
Detection completed with 138.77 seconds!
Connecting...
Connection successful,connected state!
Version: V3.8
SN:001-619-535
Port:COM11
Detection initiated, connect the phone and power on it...
Vcc: 18
Gnd: 21 23 24
Analyzing Rx and Tx...
Individual phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient...
User stop
Pinouts are not fonud!
Detection initiated, connect the phone and power on it...
Vcc: null
Gnd: 4 5
Analyzing Rx and Tx...
Individual phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient...
User stop
Pinouts are not fonud!
Detection initiated, connect the phone and power on it...
Vcc: 18
Gnd: 21 23 24
Analyzing Rx and Tx...
Individual phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient...
Failed to detect.
Pinouts are not fonud!
Detection initiated, connect the phone and power on it...
Vcc: 18
Gnd: 21 23
Analyzing Rx and Tx...
Individual phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient...
Failed to detect.
Pinouts are not fonud!
Available Ports:COM1 COM11 COM63 COM64
Waiting for phone's response,please press Power on/off button
IF Software stop here.you see Stop(red) button become Run(Green) please press and hold power button till boot downloading not start,then release power button,when you releaes power button if boot downloading stop this mean you have HARDWARE fault in your mobile
Waiting for phone's response,please press Power on/off button
IF Software stop here.you see Stop(red) button become Run(Green) please press and hold power button till boot downloading not start,then release power button,when you releaes power button if boot downloading stop this mean you have HARDWARE fault in your mobile
Detection initiated, connect the phone and power on it...
Vcc: 18
Gnd: 21 23
Analyzing Rx and Tx...
Individual phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient...
User stop
Pinouts are not fonud!
Clearing pinouts...
>>Clearing pinouts complete!

[IMG]http://*************************/clear.gif[/IMG] Reply With Quote

Volcano Box · 03-06-2012, 15:08

its not actually slow as you shown

just connect cable in correct way and press and hold power button

binharmani · 03-06-2012, 15:54

Quote:

Originally Posted by Volcano Box

its not actually slow as you shown

just connect cable in correct way and press and hold power button

I have tried many times and only once the connection is
MT6235, RX: 20 TX: 24, Pull down: 22
Detection completed with 138.77 seconds!
remaining failed

Volcano Box · 03-06-2012, 16:09

sure mobile connector not good.....

akhil_bbsr · 03-06-2012, 16:42

Try this method after pin out set just disconnect power cable and -ve reconnect again press power on .

way2unlock · 03-06-2012, 18:51

Dear sir really slow identify pinout. I chek with speadtrum CPU
Format done instant but pinout slow please give proper way or solve this thanx

ferhel · 03-06-2012, 19:08

Quote:

Dear sir really slow identify pinout. I chek with speadtrum CPU
Format done instant but pinout slow please give proper way or solve this thanx

is that true Slow identify pinout..????

waiting For Fixing Slow identify pinout First

binharmani · 03-07-2012, 01:13

flash cpu infinion
Waiting for response, please press the power button

User termination!
Program termination!
Detection initiated, connect the phone and power on it...
Vcc: 4
Gnd: 2
Analyzing Rx and Tx...
Detection process abnormal.
>>Pinouts are not fonud!

binharmani · 03-07-2012, 01:14

Detection initiated, connect the phone and power on it...
Vcc: 4
Gnd: 2
Analyzing Rx and Tx...
Infineon7880 RX: 9, TX: 7
Setting...
Pinouts setting complete!

Waiting for response, please press the power button
User termination!
Program termination!

binharmani · 03-07-2012, 01:15

hardware your box proleam ?

binharmani · 03-07-2012, 01:18

binharmani · 03-07-2012, 02:54

MTK chip volcano can not flash with box

Volcano Box · 03-07-2012, 03:01

Quote:

Originally Posted by binh******

vocano scan pinput mtk very slow

Volcano Updated: 2012-03-02
Connecting...
Connection successful,connected state!
Version: V3.8
SN:001-619-535
Port:COM11
Detecting rx and tx...
Vcc: null
Gnd: null
Detection initiated, connect the phone and power on it...
Individual phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient...
Failed to detect.
Detecting rx and tx...
Vcc: 18
Gnd: 19 21
Detection initiated, connect the phone and power on it...
Individual phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient...
User stop
Detecting rx and tx...
Vcc: null
Gnd: 4 5
Detection initiated, connect the phone and power on it...
Individual phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient...
User stop
Detecting rx and tx...
Vcc: 18
Gnd: 21 23
Detection initiated, connect the phone and power on it...
Individual phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient...
MT6235, RX: 20, TX: 24, Pull down: 22
Detection completed with 138.77 seconds!
Connecting...
Connection successful,connected state!
Version: V3.8
SN:001-619-535
Port:COM11
Detection initiated, connect the phone and power on it...
Vcc: 18
Gnd: 21 23 24
Analyzing Rx and Tx...
Individual phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient...
User stop
Pinouts are not fonud!
Detection initiated, connect the phone and power on it...
Vcc: null
Gnd: 4 5
Analyzing Rx and Tx...
Individual phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient...
User stop
Pinouts are not fonud!
Detection initiated, connect the phone and power on it...
Vcc: 18
Gnd: 21 23 24
Analyzing Rx and Tx...
Individual phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient...
Failed to detect.
Pinouts are not fonud!
Detection initiated, connect the phone and power on it...
Vcc: 18
Gnd: 21 23
Analyzing Rx and Tx...
Individual phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient...
Failed to detect.
Pinouts are not fonud!
Available Ports:COM1 COM11 COM63 COM64
Waiting for phone's response,please press Power on/off button
IF Software stop here.you see Stop(red) button become Run(Green) please press and hold power button till boot downloading not start,then release power button,when you releaes power button if boot downloading stop this mean you have HARDWARE fault in your mobile
Waiting for phone's response,please press Power on/off button
IF Software stop here.you see Stop(red) button become Run(Green) please press and hold power button till boot downloading not start,then release power button,when you releaes power button if boot downloading stop this mean you have HARDWARE fault in your mobile
Detection initiated, connect the phone and power on it...
Vcc: 18
Gnd: 21 23
Analyzing Rx and Tx...
Individual phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient...
User stop
Pinouts are not fonud!
Clearing pinouts...
>>Clearing pinouts complete!

[IMG]http://*************************/clear.gif[/IMG] Reply With Quote

There is surely some problem somewhere.... Could you try this please?

1.please connect a 9V adaptor, press volcano box power-on button

2.detect again,to check whether it's pc usb-port power supply is not enough or stable

--------------------------------------------------------------------------------

Also for kindly tips, detecting mtk program is NP for sure,if it still takes long time,check hardware problem or
1.main cable and connector whether connected hardly?
2.volcano box self-test is normal?
3.pc power supply is stable?
4.do you clip VCC/GND correctly and connected well?

binharmani · 03-07-2012, 03:18

after hooking 9v adpater situation has not improved, still does not scan the battery out while MTK flash is ok gpg MTK box, all china phone power tests are normal

binharmani · 03-07-2012, 03:26

gpg ok all

03-06-2012, 14:13	#1 (permalink)
binharmani Freak Poster Join Date: Aug 2007 Location: slovakia Posts: 171 Member: 558339 Status: Offline Thanks Meter: 10	vocano scan pinput mtk very slow (read post number 62) vocano scan pinput mtk very slow Volcano Updated: 2012-03-02 Connecting... Connection successful,connected state! Version: V3.8 SN:001-619-535 Port:COM11 Detecting rx and tx... Vcc: null Gnd: null Detection initiated, connect the phone and power on it... Individual phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient... Failed to detect. Detecting rx and tx... Vcc: 18 Gnd: 19 21 Detection initiated, connect the phone and power on it... Individual phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient... User stop Detecting rx and tx... Vcc: null Gnd: 4 5 Detection initiated, connect the phone and power on it... Individual phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient... User stop Detecting rx and tx... Vcc: 18 Gnd: 21 23 Detection initiated, connect the phone and power on it... Individual phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient... MT6235, RX: 20, TX: 24, Pull down: 22 Detection completed with 138.77 seconds! Connecting... Connection successful,connected state! Version: V3.8 SN:001-619-535 Port:COM11 Detection initiated, connect the phone and power on it... Vcc: 18 Gnd: 21 23 24 Analyzing Rx and Tx... Individual phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient... User stop Pinouts are not fonud! Detection initiated, connect the phone and power on it... Vcc: null Gnd: 4 5 Analyzing Rx and Tx... Individual phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient... User stop Pinouts are not fonud! Detection initiated, connect the phone and power on it... Vcc: 18 Gnd: 21 23 24 Analyzing Rx and Tx... Individual phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient... Failed to detect. Pinouts are not fonud! Detection initiated, connect the phone and power on it... Vcc: 18 Gnd: 21 23 Analyzing Rx and Tx... Individual phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient... Failed to detect. Pinouts are not fonud! Available Ports:COM1 COM11 COM63 COM64 Waiting for phone's response,please press Power on/off button IF Software stop here.you see Stop(red) button become Run(Green) please press and hold power button till boot downloading not start,then release power button,when you releaes power button if boot downloading stop this mean you have HARDWARE fault in your mobile Waiting for phone's response,please press Power on/off button IF Software stop here.you see Stop(red) button become Run(Green) please press and hold power button till boot downloading not start,then release power button,when you releaes power button if boot downloading stop this mean you have HARDWARE fault in your mobile Detection initiated, connect the phone and power on it... Vcc: 18 Gnd: 21 23 Analyzing Rx and Tx... Individual phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient... User stop Pinouts are not fonud! Clearing pinouts... >>Clearing pinouts complete! [IMG]http://*************************/clear.gif[/IMG] Reply With Quote

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SMSC number	Ryu	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	08-17-2019 05:35
Eeprom reading	KLImax	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	09-22-2011 15:55
Silly question!! Why is it impossible to read out the mastercode of Nokia phones????	MyKe	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	09-26-1999 14:31

03-06-2012, 15:08	#2 (permalink)
Volcano Box No Life Poster Join Date: Jan 2012 Posts: 1,176 Member: 1716315 Status: Offline Thanks Meter: 4,634	its not actually slow as you shown just connect cable in correct way and press and hold power button

03-06-2012, 16:09	#4 (permalink)
Volcano Box No Life Poster Join Date: Jan 2012 Posts: 1,176 Member: 1716315 Status: Offline Thanks Meter: 4,634	sure mobile connector not good.....

03-06-2012, 16:42	#5 (permalink)
akhil_bbsr No Life Poster Join Date: May 2006 Location: MOBILE SOFTZONE BHUBANESWAR IN Posts: 3,509 Member: 271478 Status: Offline Sonork: 1590868 Thanks Meter: 1,070	Try this method after pin out set just disconnect power cable and -ve reconnect again press power on .

03-06-2012, 18:51	#6 (permalink)
way2unlock No Life Poster Join Date: Sep 2007 Location: EARTH Age: 42 Posts: 541 Member: 582682 Status: Offline Sonork: 100.1607124 Thanks Meter: 136	Dear sir really slow identify pinout. I chek with speadtrum CPU Format done instant but pinout slow please give proper way or solve this thanx

03-07-2012, 01:13	#8 (permalink)
binharmani Freak Poster Join Date: Aug 2007 Location: slovakia Posts: 171 Member: 558339 Status: Offline Thanks Meter: 10	flash cpu infinion Waiting for response, please press the power button User termination! Program termination! Detection initiated, connect the phone and power on it... Vcc: 4 Gnd: 2 Analyzing Rx and Tx... Detection process abnormal. >>Pinouts are not fonud!

03-07-2012, 01:14	#9 (permalink)
binharmani Freak Poster Join Date: Aug 2007 Location: slovakia Posts: 171 Member: 558339 Status: Offline Thanks Meter: 10	Detection initiated, connect the phone and power on it... Vcc: 4 Gnd: 2 Analyzing Rx and Tx... Infineon7880 RX: 9, TX: 7 Setting... Pinouts setting complete! Waiting for response, please press the power button User termination! Program termination!

03-07-2012, 01:15	#10 (permalink)
binharmani Freak Poster Join Date: Aug 2007 Location: slovakia Posts: 171 Member: 558339 Status: Offline Thanks Meter: 10	hardware your box proleam ?

03-07-2012, 01:18	#11 (permalink)
binharmani Freak Poster Join Date: Aug 2007 Location: slovakia Posts: 171 Member: 558339 Status: Offline Thanks Meter: 10

03-07-2012, 02:54	#12 (permalink)
binharmani Freak Poster Join Date: Aug 2007 Location: slovakia Posts: 171 Member: 558339 Status: Offline Thanks Meter: 10	MTK chip volcano can not flash with box

03-07-2012, 03:18	#14 (permalink)
binharmani Freak Poster Join Date: Aug 2007 Location: slovakia Posts: 171 Member: 558339 Status: Offline Thanks Meter: 10	after hooking 9v adpater situation has not improved, still does not scan the battery out while MTK flash is ok gpg MTK box, all china phone power tests are normal

03-07-2012, 03:26	#15 (permalink)
binharmani Freak Poster Join Date: Aug 2007 Location: slovakia Posts: 171 Member: 558339 Status: Offline Thanks Meter: 10	gpg ok all