🐙 Post here success Reset FRP story with Octoplus FRP Tool

[wahiditunes]

Welcome to Octoplus FRP Tool v.1.1.8
Platform: HUAWEI
Selected model: MYA-L22
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: MYA-L22
Phone SN: R9KBBDB7A3102545
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.1.8 Software version.

[rebainoor]

INFO  : 15/03/2018 14:59:24 > Welcome to Octoplus FRP Tool v.1.1.8
INFO  : 15/03/2018 15:00:23 > Platform: HUAWEI
INFO  : 15/03/2018 15:00:23 > Selected model: NEM-L21
INFO  : 15/03/2018 15:00:23 > Put the phone in FastBoot Mode:
INFO  : 15/03/2018 15:00:23 > 1. Remove SD and SIM cards from the phone
INFO  : 15/03/2018 15:00:23 > 2. Power phone OFF
INFO  : 15/03/2018 15:00:23 > 3. Press and hold "Vol-" and insert USB cable
INFO  : 15/03/2018 15:00:23 > 4. Wait until the phone enter in FastBoot Mode
INFO  : 15/03/2018 15:00:23 > Searching for a phone. Please wait...
INFO  : 15/03/2018 15:00:23 > Detected phone model: NEM-L21
INFO  : 15/03/2018 15:00:23 > Phone SN: 8SC4C16920000317
INFO  : 15/03/2018 15:00:23 > Phone IMEI: 860899033343587
INFO  : 15/03/2018 15:00:23 > Phone IMEI: 860899033373592
INFO  : 15/03/2018 15:00:23 > SW version: NEM-L21C432B132
INFO  : 15/03/2018 15:00:23 > Connecting to server..
INFO  : 15/03/2018 15:00:24 > OK
INFO  : 15/03/2018 15:00:24 > Authorizing...
INFO  : 15/03/2018 15:00:26 > OK
INFO  : 15/03/2018 15:00:26 > Resetting FRP lock..
WARN  : 15/03/2018 15:00:34 > If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
WARN  : 15/03/2018 15:00:34 > FRP lock is successfully reseted!
INFO  : 15/03/2018 15:00:34 > Performed by 1.1.8 Software version.

[rebainoor]

INFO  : 15/03/2018 15:02:34 > Platform: HUAWEI
INFO  : 15/03/2018 15:02:34 > Selected model: CAM-AL00
INFO  : 15/03/2018 15:02:34 > Put the phone in FastBoot Mode:
INFO  : 15/03/2018 15:02:34 > 1. Remove SD and SIM cards from the phone
INFO  : 15/03/2018 15:02:34 > 2. Power phone OFF
INFO  : 15/03/2018 15:02:34 > 3. Press and hold "Vol-" and insert USB cable
INFO  : 15/03/2018 15:02:34 > 4. Wait until the phone enter in FastBoot Mode
INFO  : 15/03/2018 15:02:34 > Searching for a phone. Please wait...
INFO  : 15/03/2018 15:02:34 > Detected phone model: CAM-AL00
INFO  : 15/03/2018 15:02:34 > Phone SN: XKG4C16B16002638
INFO  : 15/03/2018 15:02:34 > Phone IMEI: 863792031728288
INFO  : 15/03/2018 15:02:34 > Connecting to server..
INFO  : 15/03/2018 15:02:35 > OK
INFO  : 15/03/2018 15:02:35 > Authorizing...
INFO  : 15/03/2018 15:02:37 > OK
INFO  : 15/03/2018 15:02:37 > Resetting FRP lock..
WARN  : 15/03/2018 15:02:46 > If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
WARN  : 15/03/2018 15:02:46 > FRP lock is successfully reseted!
INFO  : 15/03/2018 15:02:46 > Performed by 1.1.8 Software version.

[MOBICOM]

Asus P00C

Welcome to Octoplus FRP Tool v.1.1.8
Platform: ASUS
Selected model: Z300M (P00C)
Put the phone into Fastboot Mode:
1. Power phone OFF; 
2. Press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Phone found.
Enabling "USB Debugging" mode...
Rebooting to Normal mode...
Searching for a phone (waiting for ADB device)...
Phone found.
Reading info...
Phone model: asus P00C
SW version: NRD90M
Date: Tue Dec 19 15:15:16 CST 2017
Android version: 7.0
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.1.8 Software version.

[pintu_das]

Samsung J3 Pro SM-J330G FRP lock is successfully reseted!







Welcome to Octoplus FRP Tool v.1.1.8
Platform: SAMSUNG
Selected model: SM-J330G
Searching for a phone (waiting for ADB device)...
Please, press "OK" button on the phone to allow USB debugging..
Reading info...
Detected phone model: SM-J330G
Firmware compiled date: Fri Jun 9 21:27:53 KST 2017
PDA version: J330GDXU1AQF5
CSC version: J330GOLB1AQF5
SW version: J330GDXU1AQF5
Phone SN: R58J80MLBDA
Android version: 7.0 (NRD90M)
Sales code: XME
Country: MALAYSIA
HW platform: exynos5
HW Chip: exynos7570
HW Modem: SHANNON305
Security patch level: 2017-06-01
Codename: j3y17ltedx
Resetting FRP lock..
FRP lock is successfully reseted!
Goto "Menu->Settings->Backup and reset" and make "Factory data reset"
Performed by 1.1.8 Software version.



Thanks Octoplus team

[maxpatri9]

Welcome to Octoplus FRP Tool v.1.1.8
Platform: LG
Selected model: MS330
Put the phone into Download Mode:
1. Power phone OFF;
2. Press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Operation was canceled
Performed by 1.1.8 Software version.

Platform: LG
Selected model: MS330
Put the phone into Download Mode:
1. Power phone OFF;
2. Press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM850
Reading info...
Detected phone model: LGMS330
Mode: Emergency
Initializing..
SW version: LGMS330AT-02-V10k-310-160-APR-05-2017-ARB01+0
Android version: 5.1.1
Performed by 1.1.8 Software version.

Platform: LG
Selected model: MS330
Put the phone into Download Mode:
1. Power phone OFF;
2. Press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM850
Reading info...
Detected phone model: LGMS330
Mode: Emergency
Initializing..
SW version: LGMS330AT-02-V10k-310-160-APR-05-2017-ARB01+0
Android version: 5.1.1
Resetting FRP lock..
Step 1...
Step 2...
FRP lock is successfully reseted!
Performed by 1.1.8 Software version.

[maxpatri9]

Platform: LG
Selected model: H873
Put the phone into Download Mode:
1. Power phone OFF;
2. Press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM854
Reading info...
Detected phone model: LG-H873
Mode: Emergency
Initializing..
SW version: LGH873AT-00-V15c-CAN-XX-OCT-26-2017-ARB00+0
Android version: 7.0
Reading partition...
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.1.8 Software version.

[maxpatri9]

Welcome to Octoplus FRP Tool v.1.1.8
Platform: LG
Selected model: H873
Put the phone into Download Mode:
1. Power phone OFF;
2. Press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM859
Reading info...
Detected phone model: LG-K373
Warning: Selected model (H873) differs from the detected one (LG-K373)!
Mode: Emergency
Initializing..
SW version: LGK373AT-01-V11v-310-150-JAN-11-2017-ARB01+0
Android version: 6.0
Performed by 1.1.8 Software version.

Platform: LG
Selected model: K373
Put the phone into Download Mode:
1. Power phone OFF;
2. Press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM859
Reading info...
Detected phone model: LG-K373
Mode: Emergency
Initializing..
SW version: LGK373AT-01-V11v-310-150-JAN-11-2017-ARB01+0
Android version: 6.0
Reading partition...
Resetting FRP lock..
Step 1...
Step 2...
Step 3...
FRP lock is successfully reseted!
Performed by 1.1.8 Software version.

[maxpatri9]

Welcome to Octoplus FRP Tool v.1.1.8
Platform: LG
Selected model: LS676
Put the phone into Download Mode:
1. Power phone OFF;
2. Press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM866
Reading info...
Detected phone model: LGLS676
Mode: Emergency
Initializing..
SW version: LS676ZV7_09
Android version: 6.0.1
Performed by 1.1.8 Software version.

Platform: LG
Selected model: LS676
Put the phone into Download Mode:
1. Power phone OFF;
2. Press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM866
Reading info...
Detected phone model: LGLS676
Mode: Emergency
Initializing..
SW version: LS676ZV7_09
Android version: 6.0.1
Reading partition...
Resetting FRP lock..
Step 1...
Step 2...
Step 3...
FRP lock is successfully reseted!
Performed by 1.1.8 Software version.

[danieltotten35]

Platform: ALCATEL
Selected model: OT-5054O
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM376
Mode: Diagnostic
Rebooting to Qualcomm 9008 mode...
Found phone on COM121
Mode: Qualcomm 9008
Connecting...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: TCL
Model: Alcatel_5054O
Device: Pop355
Platform: msm8909
Android version: 5.1.1
Display ID: LMY47V release-keys
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Rebooting phone
Backup saved as ALCATEL_OT-5054O_17-03-2018_00-13-15.dump file

[danieltotten35]

Platform: SAMSUNG
Selected model: SM-G570F
Searching for UART interface..
Found more then one box connected to COM7 COM7
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface..
Found more then one box connected to COM7 COM7
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (1/4 attempt)..success
FRP lock is successfully reseted!
Performed by 1.1.3 Software version.

[BxS4ever]

Hi Team, thank you so much. I was struggling to unlock this device

Welcome to Octoplus FRP Tool v.1.1.8
Platform: CUBOT
Selected model: DINOSAUR
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM19
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2017-09-06.13:15_388644, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010038.474D4534.520145C1.F46194C3
eMMC Flash: Samsung: 8GME4R
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: Mediacom
Model: M-SP10HXxH
Device: M-SP10HXxH
Platform: mt6580
Android version: 7.0
Display ID: MEDIACOM Version 3.00 (11/2017)
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as CUBOT_DINOSAUR_17-03-2018_15-38-51.dump file
Performed by 1.1.8 Software version.

[Maurioski]

Here is the log, selecting XT1676

Platform: MOTOROLA
Selected model: XT1676
Put the phone into Factory Mode: 
1. Power phone OFF; 
2. Press and hold "Vol-" + "Power" buttons; 
3. Select Factory Mode, then confirm your selection; 
4. Wait until the phone Power ON; 
5. Connect USB cable.
Searching for a phone. Please wait...
Phone found.
Reading info...
Phone model: 8953.gen
Firmware released date: Jul  6 2017
Firmware released time: 09:19:26
Firmware compiled date: Jul 05 2017
Firmware compiled time: 17:00:00
SW version: MPSS.TA.2.3.c5-00034-8953_GEN_PACK-1.106169.1
Enabling "USB Debugging" mode...
Searching for a phone. Please wait...
Enabling "USB Debugging" mode...
Put the phone in Factory Mode:
1. Disconnect USB cable;
2. Power OFF the phone;
3. Press "Vol-" and "Power" buttons;
4. Select Factory Mode then confirm your selection;
5. Wait until phone is power ON and connect USB Cable;
6. Install necesarry drivers then press "OK" button
Please, press "OK" button on the phone to allow USB debugging..
Searching for a phone (waiting for ADB device)...
Phone found.
Reading info...
Phone model: motorola Moto G (5S) Plus
SW version: NPSS26.116-26-4
Date: Mon Oct 16 21:56:06 CDT 2017
Android version: 7.1.1
Baseband M8953_24.34.07.35R SANDERS_LATAM_CUST
Detected phone model: XT1800
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.1.7 Software version.

[maxpatri9]

Welcome to Octoplus FRP Tool v.1.1.8
Platform: LG
Selected model: LS755
Put the phone into Download Mode:
1. Power phone OFF;
2. Press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM277
Reading info...
Detected phone model: LGLS755
Mode: Emergency
Initializing..
SW version: LS755ZVB_04
Android version: 6.0.1
Reading partition...
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.1.8 Software version.

[imanka]

etel n6 frp removed selected as huawei LUA-L21


Platform: HUAWEI
INFO : 3/17/2018 11:41:36 AM > Selected model: LUA-L21
WARN : 3/17/2018 11:41:36 AM > Please, power phone OFF and connect USB cable.
INFO : 3/17/2018 11:41:36 AM > Searching for a phone. Please wait...
INFO : 3/17/2018 11:41:48 AM > Found phone on COM15
INFO : 3/17/2018 11:41:49 AM > Detecting Chip Version...
INFO : 3/17/2018 11:41:49 AM > HW Chip: MT6737T: 0321.0000
INFO : 3/17/2018 11:41:49 AM > HW Version: 8A00.CB00.0000.0000
INFO : 3/17/2018 11:41:49 AM > Connecting...
INFO : 3/17/2018 11:41:49 AM > Brom Version: FF
INFO : 3/17/2018 11:41:49 AM > BootLoader Version: 01
INFO : 3/17/2018 11:41:49 AM > Searching Download Agent...
INFO : 3/17/2018 11:41:49 AM > Selected DA: MTK_AllInOne_DA_Octoplus_Huawei_v.1, n.4
INFO : 3/17/2018 11:41:49 AM > Sending Download Agent...
INFO : 3/17/2018 11:41:49 AM > DA sent successfully
INFO : 3/17/2018 11:41:49 AM > Initializing DA...
INFO : 3/17/2018 11:41:49 AM > Synchronizing with DA...
INFO : 3/17/2018 11:41:49 AM > NAND Flash: not installed
INFO : 3/17/2018 11:41:49 AM > eMMC Flash: .15010046.3832324D.4200CE53.C0F73D5F
INFO : 3/17/2018 11:41:49 AM > eMMC Flash: Samsung: F822MB
INFO : 3/17/2018 11:41:49 AM > DA ver: 4.2.93
INFO : 3/17/2018 11:41:49 AM > Initializing Memory Flash..
INFO : 3/17/2018 11:41:50 AM > Initialization successfully completed
INFO : 3/17/2018 11:41:51 AM > Sending loaders...
INFO : 3/17/2018 11:41:51 AM > Loader send successfuly.
INFO : 3/17/2018 11:41:51 AM > Reading Flash Info...
INFO : 3/17/2018 11:41:52 AM > EMMC rpmb size: 4 Mb
INFO : 3/17/2018 11:41:52 AM > EMMC boot1 size: 4 Mb
INFO : 3/17/2018 11:41:52 AM > EMMC boot2 size: 4 Mb
INFO : 3/17/2018 11:41:52 AM > EMMC gp1 size: 0 Mb
INFO : 3/17/2018 11:41:52 AM > EMMC gp2 size: 0 Mb
INFO : 3/17/2018 11:41:52 AM > EMMC gp3 size: 0 Mb
INFO : 3/17/2018 11:41:52 AM > EMMC gp4 size: 0 Mb
INFO : 3/17/2018 11:41:52 AM > EMMC user area size: 14910 Mb
INFO : 3/17/2018 11:41:52 AM > Internal RAM size: 128 Kb
INFO : 3/17/2018 11:41:52 AM > External RAM size: 1024 Mb
INFO : 3/17/2018 11:41:52 AM > Reading partition...
INFO : 3/17/2018 11:41:52 AM > Reading info...
INFO : 3/17/2018 11:41:52 AM > Brand: E-tel
INFO : 3/17/2018 11:41:52 AM > Model: E-tel N6
INFO : 3/17/2018 11:41:52 AM > Device: E-tel N6
INFO : 3/17/2018 11:41:52 AM > Platform: mt6735
INFO : 3/17/2018 11:41:52 AM > Android version: 5.1
INFO : 3/17/2018 11:41:52 AM > Display ID: E-tel_N6_C006
INFO : 3/17/2018 11:41:52 AM > Searching for signatures...
INFO : 3/17/2018 11:41:52 AM > Resetting FRP lock..
WARN : 3/17/2018 11:41:52 AM > FRP lock is successfully reseted!
INFO : 3/17/2018 11:41:52 AM >