Infinity Chinese Miracle-2 SPD/UniSOC v2.05 - NAND, KaiOs and new features

[YellowBoss]

Originally Posted by ranakamran

hey sir how can i unlock the sim lock with android version 8.1.0 sprd with cm2 spd please help me

hey sir please post here software operation log tex and your phone details

[JonaR88]

Hi team, can add support for ZTE v10 Vita, Unlock , only can with furious

[InfinityHelp]

Originally Posted by JonaR88

Hi team, can add support for ZTE v10 Vita, Unlock

Hi friend, copy/paste here Infinity software operation log text

[kngoya]

privacy lock option shows access violation error each time i want to reed code on this version, but when i use older version 2.02 it works fine. The phone was itel A33, can you check and fix the bug in next update. Also we need SP lock activated on new spd android phones like Aspire 5, zte l130 and nokia TA-1165 with level 4 security, no tool is able to unlock these type of phones at the moment. Its becoming a challenge these days we have heaps and heaps of these SP locked phones without solutions. ... through online credits, but Infinity is my best tool i believe in you, i will rather wait for your permanent solution.

[lekaz]

Infinity team be serious on SPD atleast you could have enabled a simple sim unlock ... sim unlock via diagnostic mode. Spd module is the only unique thing you have on reading fw than others boxes

[YellowBoss]

@lekaz
friend be serious, your advertizing methods just make us smile. And you live in free world, you are free to buy any tool that you want.
good luck !

[YellowBoss]

Originally Posted by kngoya

privacy lock option shows access violation error each time i want to reed code on this version, but when i use older version 2.02 it works fine. The phone was itel A33, can you check and fix the bug in next update. Also we need SP lock activated on new spd android phones like Aspire 5, zte l130 and nokia TA-1165 with level 4 security, no tool is able to unlock these type of phones at the moment. Its becoming a challenge these days we have heaps and heaps of these SP locked phones without solutions. ...

pls always post software operation logs, it's the only way we can see the problem (if any).

[lekaz]

Originally Posted by YellowBoss

@lekaz
friend be serious, your advertizing methods just make us smile. And you live in free world, you are free to buy any tool that you want.
good luck !

No friend am not advertising am a heavy user of cm2 as a customer if you could have simlock tab enabled even though diag mode.. there was no need for me to be using the mentioned tool, please take it into consideration

[JayDi]

Originally Posted by lekaz

Infinity team be serious on SPD atleast you could have enabled a simple sim unlock ... sim unlock via diagnostic mode. Spd module is the only unique thing you have on reading fw than others boxes

Every our module have unique features. So, when we done other things, sure, they will be enabled too.

[lekaz]

Originally Posted by JayDi

Every our module have unique features. So, when we done other things, sure, they will be enabled too.

Waiting patiently as years are going

[Y-GSM TECH]

I have the same problem
Read Privacy Itel A33
[IMG][/IMG]

[Yusuf Lawal]

Originally Posted by Y-GSM TECH

I have the same problem
Read Privacy Itel A33
[IMG][/IMG]

Use v2.04, team will fix bug in next update.

[babu786]

Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.05

Load IDBase v42913 Ok!


Open : SPD_PROG.xml
Reading package ...
Read package finished!

Created by Infinity-Box (c) 2020
Chinese Miracle II : Spreadtrum / UniSoc Service Module
Device Info file : _Android_info.txt

Patch Level : MRA58K
Display ID : Series_A_A10_Android_8.1_V01_2019-10-09
Ver. Incmt : root-103233
Ver. CodeName : REL
Ver. Release : 8.1
Sec. Patch : 2016-07-01
Build Time : 1570610972
Product Brand : Series A
Product Name : A10
Product Device : A10
Product Board : sp7731gea_hdr
Product Manfct : Series A
Board Platform : sc8830
Product Info : A10
Product Model : A10


Operation : Flash Firmware [ v2.05 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : SlowSparse Fix : True
Setting : Update PMT : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x20
PMTMng : Update failed!
ERROR : 00000084:84000000FF7B7E00
SYS : OPERATION FAILED!


Error : Flashing failed!
Make sure device HW is ok, check battery and cable! Try hold BootKey at whole Flash Process

Reconnect Power/Cable!

hello sir i have one invens phone s7731G and i readed firmware from working phone but whn i write same readed firmware i get error. can u please tell me what is the issue

[fahadboss]

VGOTel Smart 5 SC9863A Android 9 read firmware done.
But very slow speed:

Operation : Read FW [ v2.05 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9863x_BASE : SC9863_eMMC_2GB_RS
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 2000000
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : Control transfered!

Boot Done!

Device info : 
Patch Level    : PPR1.180610.011
Display ID     : Smart_5_V07_20190520_1114
Display ID     : Smart_5_V10_20190918_1603
Ver. Incmt     : 20190520
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2019-09-05
Build Time     : 1568789583
Product Model  : Smart 5
Product Brand  : VGOTEL
Product Name   : Smart_5
Product Device : Smart_5
Product Manfct : VGOTEL
Product Info   : Smart_5
Product Board  : sp9863a_1h10
Board Platform : sp9863a

AndroidVer : 9
VlnrLevel : 0x02

SP9863A__VGOTEL__Smart_5__9__Smart_5_V10_20190918_1603__PPR1.180610.011__Smart_5

Read : u-boot.bin
Read : sml.bin
Read : tos.bin
Read : vbmeta.img
Read : dtb.img
Read : dtbo.img
Read : ldsp_l.bin
Read : gdsp_l.bin
Read : modem_l.bin
Read : nvitem_l.bin
Read : modem_wcn.img
Read : gnssmodem.bin
Read : gnssbdmodem.bin
Read : pm_sys.bin
Read : boot.img
Read : recovery.img
Make : persist.img
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Read : system.img
Read : vendor.img
Read : otp_product.img
ExtSparse : Compression ratio : 1%
Make : userdata.img
Make : cache.img
Read : prodnv.img
ExtSparse : Compression ratio : 19%
Read : phase.cfg
Read : u-boot-spl.bin

Waiting for device ... 
ADB : Device found!
ADB : Connected!
ADB : Prepare Ok!
Cookies!
Found vodka!
Found bear!

Firmware size : 0x112EF11FC ( 4.30 GiB )
Android Info saved : _Android_info.txt
Reconnect Power/Cable!


Done!
Elapsed: 01:11:51

Because of no ExtSparse for System partition, firmware size also increased a lot.
3.75 GB only System.img

[JayDi]

Originally Posted by babu786

Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.05

Load IDBase v42913 Ok!


Open : SPD_PROG.xml
Reading package ... 
Read package finished!

Created by Infinity-Box (c) 2020
Chinese Miracle II : Spreadtrum / UniSoc Service Module
Device Info file   : _Android_info.txt

Patch Level    : MRA58K
Display ID     : Series_A_A10_Android_8.1_V01_2019-10-09
Ver. Incmt     : root-103233
Ver. CodeName  : REL
Ver. Release   : 8.1
Sec. Patch     : 2016-07-01
Build Time     : 1570610972
Product Brand  : Series A
Product Name   : A10
Product Device : A10
Product Board  : sp7731gea_hdr
Product Manfct : Series A
Board Platform : sc8830
Product Info   : A10
Product Model  : A10


Operation : Flash Firmware [ v2.05 ]

Setting   : Update NVRAM : False
Setting   : Force NVRAM : False
Setting   : SlowSparse Fix : True
Setting   : Update PMT   : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x20
PMTMng : Update failed!
ERROR  : 00000084:84000000FF7B7E00
SYS : OPERATION FAILED!


Error : Flashing failed!
Make sure device HW is ok, check battery and cable! Try hold BootKey at whole Flash Process

Reconnect Power/Cable!

hello sir i have one invens phone s7731G and i readed firmware from working phone but whn i write same readed firmware i get error. can u please tell me what is the issue

That may happen sometimes, try select FW then change generic boot to your chip and try again.
Make sure battery charged.
If device not power on - try also make complete format and then flash.