Infinity Chinese Miracle II SCR/SPD-RDA v1.06 - New models and features - Page 5 - GSM-Forum

MNA89 · 05-02-2020, 14:14

let me show you my Installed Programmas List

https://imgur.com/SmApHti

Bro i dont think so these kinds of progrmas are conflts with Infinty New Moduls updates even same issue Coming On In Recently Update in CM2SP2 2.05 Module
let me show you What im Getting Same this error in New update "(module) sp2 2.05

Error#1
https://imgur.com/Fs6dmZs

Press Ok After that

Error#2

https://imgur.com/GvKzRJE

and my system Info here

https://imgur.com/rbn59CA

if these problems will remains so its mean we cannot more use new updates of infinity new modules .

if older and previous Modules working Good so why new modules Creating problems every time.there is no issue on MT2 New module.

YellowBoss · 05-02-2020, 19:24

Quote:

Originally Posted by MNA89

let me show you my Installed Programmas List

https://imgur.com/SmApHti

Bro i dont think so these kinds of progrmas are conflts with Infinty New Moduls updates even same issue Coming On In Recently Update in CM2SP2 2.05 Module
let me show you What im Getting Same this error in New update "(module) sp2 2.05

Error#1
https://imgur.com/Fs6dmZs

Press Ok After that

Error#2

https://imgur.com/GvKzRJE

and my system Info here

https://imgur.com/rbn59CA

if these problems will remains so its mean we cannot more use new updates of infinity new modules .

if older and previous Modules working Good so why new modules Creating problems every time.there is no issue on MT2 New module.

I can't find anything wrong at your pictures.
But if before you was unable to run SCR 1.05 but now you can - it means that you have installed (or deleted or changed) something at your PC. Maybe additional software or maybe drivers or maybe another drivers version.
so it is important to know what was the changes with your PC from the last time

Khadaff_papillo · 05-02-2020, 19:24

greetings

Whenever I install an antivirus the infinity modules do not open, what do I do? because i can't use my pc without antivirus.

YellowBoss · 05-02-2020, 19:25

Quote:

Originally Posted by Khadaff_papillo

greetings

Whenever I install an antivirus the infinity modules do not open, what do I do? because i can't use my pc without antivirus.

You can add Infinity software as excetion.

also what is your antivirus type ?

YellowBoss · 05-02-2020, 19:42

Quote:

Originally Posted by Khadaff_papillo

greetings

Whenever I install an antivirus the infinity modules do not open, what do I do? because i can't use my pc without antivirus.

Disable antivirus and run Infinity software As Administrator

What is the result ?

Yusuf Lawal · 06-17-2020, 15:04

Operation : Identify [ v1.06 ]
BootMode : SVC

1. Power off device
2. Not hold any key on device!
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

ModemInfo :
Platform Version: MOCOR_12C.W13.04.23.BTDialer.18_Release
Project Version: SC6531_BAR
BASE Version: BASE_SVN
HW Version: SC6531_BAR
CMP_Time : 07-25-2019 10:57:46

SecInfo :
IMEI[1] : XXXXXXXXXXXXXXX
IMEI[2] : XXXXXXXXXXXXXXX
IMEI[3] : 000000000000000
WIFIMAC : FFFFFFFFFFFF
BT_MAC : 7A8F0AA923D6

Done!
Elapsed: 00:00:16

Reconnect Power/Cable!

Operation : Format FileSystem [ v1.06 ]

1. Power off device
2. Not hold any key on device!
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

Done!
Elapsed: 00:00:22

Reconnect Power/Cable!

JayDi · 06-18-2020, 03:58

Quote:

Originally Posted by Yusuf Lawal

Code:

Operation : Identify [ v1.06 ]
BootMode : SVC

1. Power off device
2. Not hold any key on device!
3. Insert cable and battery in device!

Wait for device ... 

Device Connected!
Enter SVC ... 
Waiting Device ... 
Check SVC ... 
SVC : DiagChannel opened!

Boot Done!

ModemInfo :
Platform Version: MOCOR_12C.W13.04.23.BTDialer.18_Release
Project Version:   SC6531_BAR
BASE  Version:     BASE_SVN
HW Version:        SC6531_BAR
CMP_Time : 07-25-2019 10:57:46

SecInfo : 
IMEI[1] : XXXXXXXXXXXXXXX
IMEI[2] : XXXXXXXXXXXXXXX
IMEI[3] : 000000000000000
WIFIMAC : FFFFFFFFFFFF
BT_MAC  : 7A8F0AA923D6

Done!
Elapsed: 00:00:16

Reconnect Power/Cable!

Operation : Format FileSystem [ v1.06 ]

1. Power off device
2. Not hold any key on device!
3. Insert cable and battery in device!

Wait for device ... 

Device Connected!
Enter SVC ... 
Waiting Device ... 
Check SVC ... 
SVC : DiagChannel opened!

Boot Done!


Done!
Elapsed: 00:00:22

Reconnect Power/Cable!

Unfortunately, 7 years old build sdk inside phone have no idea about format via diag.
Use flashmode instead.

Yusuf Lawal · 06-18-2020, 05:40

Quote:

Originally Posted by JayDi

Unfortunately, 7 years old build sdk inside phone have no idea about format via diag.
Use flashmode instead.

It already DONE in flash mode.

julius brinton · 07-10-2020, 06:45

how can flash xiaomi MCG3B
Using infinity box

amjadnona · 09-05-2020, 10:08

Card found : A9EC786B , v0145
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.06

SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]

Operation : Identify [ v1.06 ]
BootMode : SVC

1. Power off device
2. Not hold any key on device!
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : SPRD ( Legacy )
ModemInfo :
Project Version: SC6531EFM_BAR
BASE Version: BASE_SVN
HW Version: SC6531EFM_BAR
CMP_Time : 01-02-2020 17:25:06

SecInfo :
IMEI[1] : 35XXXXXXXXXXXX
IMEI[2] : 352XXXXXXXXXXX
IMEI[3] : 000000000000000
WIFIMAC : FFFFFFFFFFFF
BT_MAC : 661816083824
SEC_ID : F98DFFFFC15167BD

Done!
Elapsed: 00:00:26

Reconnect Power/Cable!

Operation : Format FileSystem [ v1.06 ]

1. Power off device
2. Not hold any key on device!
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

Format FFS Done!

Done!
Elapsed: 00:00:37

Reconnect Power/Cable!

Yusuf Lawal · 09-15-2020, 15:20

0 doesn't work for bootkey

Wait for device ...

Device Connected!
BOOT_PWR0 : 0x00200000
BOOT_INIT : 0x9A069AFC
BOOT_MODE : BOOTROM
Boot_CPU : 0x88094009 : [RDA] : RDA8851CL

Y-GSM TECH · 09-21-2020, 11:52

CM2SCR not Open,,, Help Please

Access violation at address 00404495 in mwodule 'CM2SCR. exe'. Read of adress 00000000.

YellowBoss · 09-21-2020, 12:54

Quote:

Originally Posted by Y-GSM TECH

CM2SCR not Open,,, Help Please

Access violation at address 00404495 in mwodule 'CM2SCR. exe'. Read of adress 00000000.

Do you see this message right after start or during an operation ?

gchipangura · 10-15-2020, 10:40

Stylo Aura Boot CM2 read

Quote:

Operation : Read Flash [ v1.05 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]

Read Flash Ok, Size : 4.00 MiB

FF257M80_D20_YM_PEP_E18_Aura_18291_V11_128X160_EN_ PO_FR_20190227_204010
Project Version: SC6531EFM_BAR
MMI Version: SC6531EFM_BAR
BASE Version: BASE_SVN
HW Version: SC6531EFM_BAR
02-27-2019 20:47:20
LOG Version: V1.0.1
UCOM
Saved to : C:\Users\gchip\OneDrive\Desktop\EGo\FF257M80_D20_Y M_PEP_E18_Aura_18291_V11_128X160_EN_PO_FR_20190227 _204010.bin

Done!
Elapsed: 00:01:12

Reconnect Power/Cable!

https://drive.google.com/file/d/12_H...ew?usp=sharing

GODISTHEBEST · 10-26-2020, 13:49

I can not write the firmware after i read it from the phone !! Pls help

06-17-2020, 15:04	#66 (permalink)
Yusuf Lawal No Life Poster Join Date: Oct 2011 Location: Nigeria Posts: 6,593 Member: 1677653 Status: Offline Thanks Meter: 2,769	improve DIAG mode format in next update Operation : Identify [ v1.06 ] BootMode : SVC 1. Power off device 2. Not hold any key on device! 3. Insert cable and battery in device! Wait for device ... Device Connected! Enter SVC ... Waiting Device ... Check SVC ... SVC : DiagChannel opened! Boot Done! ModemInfo : Platform Version: MOCOR_12C.W13.04.23.BTDialer.18_Release Project Version: SC6531_BAR BASE Version: BASE_SVN HW Version: SC6531_BAR CMP_Time : 07-25-2019 10:57:46 SecInfo : IMEI[1] : XXXXXXXXXXXXXXX IMEI[2] : XXXXXXXXXXXXXXX IMEI[3] : 000000000000000 WIFIMAC : FFFFFFFFFFFF BT_MAC : 7A8F0AA923D6 Done! Elapsed: 00:00:16 Reconnect Power/Cable! Operation : Format FileSystem [ v1.06 ] 1. Power off device 2. Not hold any key on device! 3. Insert cable and battery in device! Wait for device ... Device Connected! Enter SVC ... Waiting Device ... Check SVC ... SVC : DiagChannel opened! Boot Done! Done! Elapsed: 00:00:22 Reconnect Power/Cable!

07-10-2020, 06:45	#69 (permalink)
julius brinton Junior Member Join Date: May 2020 Location: mukono,lugazi Posts: 1 Member: 2958601 Status: Offline Thanks Meter: 0	ello friends how can flash xiaomi MCG3B Using infinity box

09-05-2020, 10:08	#70 (permalink)
amjadnona No Life Poster Join Date: Apr 2011 Location: Pakistan Posts: 934 Member: 1555233 Status: Offline Thanks Meter: 2,192	G Five Mobile G4 Play Format FileSystem IN DIAG mode Card found : A9EC786B , v0145 Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.06 SCRD mode : AUTO SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ] Operation : Identify [ v1.06 ] BootMode : SVC 1. Power off device 2. Not hold any key on device! 3. Insert cable and battery in device! Wait for device ... Device Connected! Enter SVC ... Waiting Device ... Check SVC ... SVC : DiagChannel opened! Boot Done! SOC GEN : SPRD ( Legacy ) ModemInfo : Project Version: SC6531EFM_BAR BASE Version: BASE_SVN HW Version: SC6531EFM_BAR CMP_Time : 01-02-2020 17:25:06 SecInfo : IMEI[1] : 35XXXXXXXXXXXX IMEI[2] : 352XXXXXXXXXXX IMEI[3] : 000000000000000 WIFIMAC : FFFFFFFFFFFF BT_MAC : 661816083824 SEC_ID : F98DFFFFC15167BD Done! Elapsed: 00:00:26 Reconnect Power/Cable! Operation : Format FileSystem [ v1.06 ] 1. Power off device 2. Not hold any key on device! 3. Insert cable and battery in device! Wait for device ... Device Connected! Enter SVC ... Waiting Device ... Check SVC ... SVC : DiagChannel opened! Boot Done! Format FFS Done! Done! Elapsed: 00:00:37 Reconnect Power/Cable!

09-15-2020, 15:20	#71 (permalink)
Yusuf Lawal No Life Poster Join Date: Oct 2011 Location: Nigeria Posts: 6,593 Member: 1677653 Status: Offline Thanks Meter: 2,769	new cpu dedected 0 doesn't work for bootkey Wait for device ... Device Connected! BOOT_PWR0 : 0x00200000 BOOT_INIT : 0x9A069AFC BOOT_MODE : BOOTROM Boot_CPU : 0x88094009 : [RDA] : RDA8851CL

10-26-2020, 13:49	#75 (permalink)
GODISTHEBEST Freak Poster Join Date: Dec 2015 Age: 46 Posts: 417 Member: 2496790 Status: Offline Thanks Meter: 11	Pls add a function of read firmware and write it I can not write the firmware after i read it from the phone !! Pls help

05-02-2020, 14:14	#61 (permalink)
MNA89 Insane Poster Join Date: Mar 2020 Location: Jauharabad, Punjab , Pakistan Posts: 88 Member: 2951507 Status: Offline Thanks Meter: 11	let me show you my Installed Programmas List https://imgur.com/SmApHti Bro i dont think so these kinds of progrmas are conflts with Infinty New Moduls updates even same issue Coming On In Recently Update in CM2SP2 2.05 Module let me show you What im Getting Same this error in New update "(module) sp2 2.05 Error#1 https://imgur.com/Fs6dmZs Press Ok After that Error#2 https://imgur.com/GvKzRJE and my system Info here https://imgur.com/rbn59CA if these problems will remains so its mean we cannot more use new updates of infinity new modules . if older and previous Modules working Good so why new modules Creating problems every time.there is no issue on MT2 New module.

05-02-2020, 19:24	#63 (permalink)
Khadaff_papillo Freak Poster Join Date: Sep 2019 Location: Mozambique Posts: 149 Member: 2927861 Status: Offline Thanks Meter: 47	greetings Whenever I install an antivirus the infinity modules do not open, what do I do? because i can't use my pc without antivirus.

09-21-2020, 11:52	#72 (permalink)
Y-GSM TECH Junior Member Join Date: Mar 2019 Location: à Madagascar Posts: 31 Member: 2902140 Status: Offline Thanks Meter: 6	CM2SCR not Open,,, Help Please Access violation at address 00404495 in mwodule 'CM2SCR. exe'. Read of adress 00000000.