Successfully unlocked/repaired phones by Infinity-Box - Page 4591 - GSM-Forum

Tanha0321 · 12-07-2021, 19:18

Code:

Patch Level    : MRA58K
Display ID     : Digit_M42421DG_AT_SW01_20201016_1801
Ver. CodeName  : REL
Ver. Release   : 6.0
Sec. Patch     : 2015-10-01
Build Time     : 16.10.2020
Product Model  : Digit4G
Product Brand  : Digit
Product Name   : Digit4G
Product Device : Digit4G
Product Manfct : alps
Board Platform : mt6739
Product Info   : Digit4G
Product Model  : mt6731

BootLoader State : Locked!

BootLoader State : Unlocked!

Done!
Elapsed: 00:00:42

Reconnect Power/Cable!


Created by Infinity-Box (c) 2021
Chinese Miracle II : MediaTek Service Module
Device Info file   : _Android_info.txt

Patch Level    : KOT49H
Display ID     : KOT49H release-keys
Ver. CodeName  : REL
Ver. Release   : 4.4.2
Build Time     : 07.05.2020
Product Model  : Digit4G
Product Brand  : Digit
Product Name   : Digit4G
Product Device : Digit4G
Product Manfct : alps
Board Platform : mt6739
Product Info   : Digit4G

Preloader [HW DEV] Info : 
 EMI : DEV : MT6739
 EMI : SRC : preloader_fise6731_kaio_m.bin
 EMI : CNT : 0006
 EMI : [00] : eMMC : DDR3 : ID : 700100454534454434 : VEN : KINGSTON  | DEV : EE4ED4 : RAM : [ 512.00 MB ]
 EMI : [01] : eMMC : DDR3 : ID : F40122426977696E20 : VEN : BIWIN     | DEV : Biwin : RAM : [ 512.00 MB ]
 EMI : [02] : eMMC : DDR3 : ID : 150100463558354342 : VEN : SAMSUNG   | DEV : F5X5CB : RAM : [ 512.00 MB ]
 EMI : [03] : eMMC : DDR3 : ID : 150100464A32354142 : VEN : SAMSUNG   | DEV : FJ25AB : RAM : [ 512.00 MB ]
 EMI : [04] : eMMC : DDR3 : ID : FE014E50314A39344D : VEN : MICRON    | DEV : P1J94M : RAM : [ 512.00 MB ]
 EMI : [05] : eMMC : DDR3 : ID : 90014A483447326111 : VEN : HYNIX     | DEV : H4G2a : RAM : [ 512.00 MB ]

Operation : Write Flash [ v2.28 ]

Repartition   : Disabled
Flash Verify  : Disabled
Reg.Pre-Erase : Disabled
Verify HW/SW  : Disabled
SData Backup  : Disabled
Safe UserData : Disabled
Flash Format  : Disabled

Files :17
[FL] : Set : preloader_fise6731_kaio_m.bin
[FL] : Set : recovery.img
[FL] : Set : md1rom.img
[FL] : Set : md1dsp.img
[FL] : Set : spmfw.img
[FL] : Set : mcupmfw.img
[FL] : Set : lk.bin
[FL] : Set : lk.bin
[FL] : Set : loader_ext.img
[FL] : Set : loader_ext.img
[FL] : Set : boot.img
[FL] : Set : logo.bin
[FL] : Set : tz.img
[FL] : Set : tz.img
[FL] : Set : system.img
[FL] : Set : cache.img
[FL] : Set : userdata.img

[FL] : Total size : 0x181146A4 [ 385.08 MB ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM9)
MODE : BOOTROM
PORT : 9
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
     CODE : Zion
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 5CE601984B6298F7903339BE6F748D39
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 4A4EECCD41E324896C806F057186969EEEBC184D691473320B65C412164F6AB2
BROM : SLA : Local Auth 
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v1844 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : MT6739
     EMI : SRC : preloader_fise6731_kaio_m.bin
     EMI : CNT : 0006
 EMI : [00] : eMMC : DDR3 : ID : 700100454534454434 : VEN : KINGSTON  | DEV : EE4ED4 : RAM : [ 512.00 MB ]
 EMI : [01] : eMMC : DDR3 : ID : F40122426977696E20 : VEN : BIWIN     | DEV : Biwin : RAM : [ 512.00 MB ]
 EMI : [02] : eMMC : DDR3 : ID : 150100463558354342 : VEN : SAMSUNG   | DEV : F5X5CB : RAM : [ 512.00 MB ]
 EMI : [03] : eMMC : DDR3 : ID : 150100464A32354142 : VEN : SAMSUNG   | DEV : FJ25AB : RAM : [ 512.00 MB ]
 EMI : [04] : eMMC : DDR3 : ID : FE014E50314A39344D : VEN : MICRON    | DEV : P1J94M : RAM : [ 512.00 MB ]
 EMI : [05] : eMMC : DDR3 : ID : 90014A483447326111 : VEN : HYNIX     | DEV : H4G2a : RAM : [ 512.00 MB ]
     EMI : Init EMI from PRELOADER
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00020000 [ 128.00 KB ]
        DRAM: 0x20000000 [ 512.00 MB ]

        EMMC: CID : 15010046355835434201D235D635C27B
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 463558354342
        EMMC: VEN : SAMSUNG : F5X5CB
        EMMC: SNN : 3526743605 ( 0xD235D635) , MF : 12/2015

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00080000 [ 512.00 KB ]
              USER   : 0xE9000000 [ 3.64 GB ]

        CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 , EVOL : 0x0000

        RNID : 69D93A7C7D933DA8A25F7BFE4A987428

DA : USB : HIGH-SPEED

Boot done!

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432


[FL] : Flashing now ... 

Write : PRELOADER
Update bootloader backup copy ... 
Update bootloader backup copy Ok!
Write : RECOVERY
Write : MD1IMG
Write : MD1DSP
Write : SPMFW
Write : MCUPMFW
Write : LK
Write : LK2
Write : LOADER_EXT1
Write : LOADER_EXT2
Write : BOOT
Write : LOGO
Write : TEE1
Write : TEE2
Write : SYSTEM
Write : CACHE
Write : USERDATA

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : Flashing finished!

Done!
Elapsed: 00:01:39

Reconnect Power/Cable!

Tanha0321 · 12-07-2021, 19:19

Code:

Patch Level    : O11019
Display ID     : O11019 release-keys
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2021-02-01
Build Time     : 08.04.2021
Product Model  : vivo 1812
Product Brand  : vivo
Product Name   : PD1917F_EX
Product Device : PD1917F_EX
Product Manfct : vivo
Product Info   : k61v1_64_bsp
Board Platform : mt6761

USERDATA : FILESYSTEM : EXT4  with FDE ( Full Disk Encryption *)

NVRAM : BBK_O1MP7_K61V1_64_BSP_MDBIN_PCB01_MT6761_S00.MOLY_LR12A_R2_MP_V32_21_P139
NVRAM : 0xB50AF625
NVRAM : State : Ok!
INFO  : WiFi MAC : AA0037003600
INFO  : BlTh MAC : D8A31598302E
INFO  : IMEI[1] : 
INFO  : IMEI[2] : 


STORAGE : Life Status : eMMC : OK!
STORAGE : OTP Status : UNLOCKED!

Done!
Elapsed: 00:00:34

Operation : Reset Settings/Format FS [ v2.28 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM9)
MODE : BOOTROM
PORT : 9
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
     CODE : Merlot
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 70F5BEE4FC9B102AB97F1552CCB59073
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : BCBCE17360BDE9595E52874FB4046E162DFF4116C02A39580EE7FE85E40A3715
BROM : SLA : Local Auth 
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_k61v1_64_bsp.bin
     EMI : CNT : 0006
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A400 [ 233.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: CID : 150100514436334D420147E4975366D7
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 514436334D42
        EMMC: VEN : SAMSUNG : QD63MB
        EMMC: SNN : 1206163283 ( 0x47E49753) , MF : 6/2019

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 749086648FF6CA230CD1F15B97BA1C1

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x805757

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA

Done!
Elapsed: 00:00:43

Reconnect Power/Cable!

Tanha0321 · 12-07-2021, 19:20

Code:

Patch Level    : NRD90M
Display ID     : F9G62B.LTXI.Xcell.HB.H.SSXSJS5MHMYP1HK.0420.V3.04
Ver. CodeName  : REL
Ver. Release   : 7.0
Sec. Patch     : 2018-04-05
Build Time     : 20.04.2018
Product Model  : Zoom
Product Brand  : Xcell
Product Name   : Xcell_Zoom
Product Device : Xcell_Zoom
Product Manfct : coosea
Board Platform : mt6737m
Product Info   : pri6737m_65_n

USERDATA : FILESYSTEM : EXT4  with FDE ( Full Disk Encryption *)

NVRAM : 0x130067818
NVRAM : State : Ok!
INFO  : WiFi MAC : 000000000000
INFO  : BlTh MAC : 000046033501
INFO  : IMEI[1] : 
INFO  : IMEI[2] : 


Done!
Elapsed: 00:00:27

Operation : Reset Settings/Format FS [ v2.28 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM10)
MODE : PRELOADER PORT
PORT : 10
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN
BROM : BROM|BL  : 0xFF|0x01
BROM : PRELOADER PORT
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6735
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
     BROM : Reset Interface!
PTFN : MTK USB Port (COM9)
MODE : BOOTROM
PORT : 9
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : LEGACY [MTK]
BROM : MEID : 56B1362288C4B78373643BD8777A8E38
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6735
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 90014A484147346132A44CE36A348D51
DAInf: 4 : 2 : 155
DA : EXT_RAM NOT initialized!
eMMC : OK
eMMC : 484A019061344741E34CA432518D346A
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
DRAM : 0x0178
     EMI : DEV : FireFly
     EMI : SRC : preloader_pri6737m_65_n.bin
     EMI : CNT : 0007
     EMI : [00] : ID : 150100513832334D42 : VEN : SAMSUNG   | DEV : Q823MB : RAM : [ 2.00 GB ]
     EMI : [01] : ID : 150100523832314D42 : VEN : SAMSUNG   | DEV : R821MB : RAM : [ 2.00 GB ]
     EMI : [02] : ID : 150100514531334D42 : VEN : SAMSUNG   | DEV : QE13MB : RAM : [ 2.00 GB ]
     EMI : [03] : ID : 13014E51324A333643 : VEN : MICRON    | DEV : Q2J36C : RAM : [ 2.00 GB ]
     EMI : [04] : ID : 13014E51334A393652 : VEN : MICRON    | DEV : Q3J96R : RAM : [ 2.00 GB ]
     EMI : [05] : ID : 13014E51324A333643 : VEN : MICRON    | DEV : Q2J36C : RAM : [ 2.00 GB ]
     EMI : [06] : ID : 90014A484147346132 : VEN : HYNIX     | DEV : HAG4a2 : RAM : [ 2.00 GB ]
     EMI : Init EMI from PRELOADER
INIT : 0xBC : DRAM [ 0x00000000 :  [ 0 B ] ]
DRAM : DRAM: 0x80000000 [ 2.00 GB ]
     DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

        EMMC: CID : 90014A484147346132A44CE36A343451
        EMMC: VEN : HYNIX : OEM : 74 : ID : 484147346132
        EMMC: VEN : HYNIX : HAG4a2
        EMMC: SNN : 1289972276 ( 0x4CE36A34) , MF : 3/2017

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x3AB800000 [ 14.68 GB ]

        SRAM: 0x00020000 [ 128.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : D35B4FA646C17F8969B61D4710BDD5FB

 STATUS : BLANK FLASH
 BSTYLE : EMMC FLASH BOOT

DA : USB : FULL-SPEED
DA : USB : Change Port Speed
PTFN : MediaTek DA USB VCOM (Android) (COM38)
MODE : PRELOADER PORT
PORT : 38

Boot done!

SmartInfo : 0x8F5454

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA

Done!
Elapsed: 00:00:51

Reconnect Power/Cable!

Tanha0321 · 12-07-2021, 19:21

Code:

Operation : Format FileSystem [ v1.07 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
BootVersion : Infinity SCR 6531EFM v2.0 (c)2019
Port speed : 921600
FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Make backup of sensetive data
Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_119F7EC21597_NVM.nv

Executing FormatFFS ... 
Format FFS Done!

Done!
Elapsed: 00:00:28

Reconnect Power/Cable!

Akhtar Ali Jatt · 12-08-2021, 07:35

Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : QSmart : i6i 2020
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0002
FDL : Control transfered!

Boot Done!

Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP

Reconnect Power/Cable!

Done!
Elapsed: 00:00:18

azhergoga007 · 12-08-2021, 07:46

Code:

Card found : A19EC787 , v0151
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.30

Load IDBase v1121431 Ok!

UserName and/or Password not set! Can't continue!

Load IDBase v1121431 Ok!

Operation : Reset Settings/Format FS [ v2.30 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM16)
MODE : BOOTROM
PORT : 16
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Talbot
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 42679ACA3848548797E6C462F019C4D6
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : FCB490E51CAA1EBAE910AE64150C7A56D384485D50B7B8C82A19AC72D346B531
BROM : SLA : Local Auth 
BROM : SLA : Auth Started!
BROM : FF : Look for EMI
BROM : FF : EMI found!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6768
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_k68v1_64.bin
     EMI : CNT : 000B
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00070000 [ 448.00 KB ]
        DRAM: 0x100000000 [ 4.00 GB ]

        EMMC: CID : 150100445636444D4202DBEB68831709
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 445636444D42
        EMMC: VEN : SAMSUNG : DV6DMB
        EMMC: SNN : 3689638019 ( 0xDBEB6883) , MF : 1/2020

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x1D1EC00000 [ 116.48 GB ]

        CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0001 , EVOL : 0x0000

        RNID : 86C504412A34F52A79A957CC78231E8C

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x835757

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA

Done!
Elapsed: 00:01:04

Reconnect Power/Cable!

A.G.Shahid · 12-08-2021, 08:46

Card found : S/N : 73CA70CC , v0150
Chinese Miracle II [MTK module] v 1.58

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 6 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 83506036AD2F175B1CBAF384E078E1A3
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00ED , [GigaDevice] GD25LQ64
[0] : FLASH_DIE : 00C8 0060 0017 0000
[0] : FLASH_LEN : 0x00800000
SDS_INFO : 0x007FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000

File_Info : FISE61A_11C_PCB01_gprs_MT6261_S00.MAUI_11C_W13_52_ MP_V2_F8.bin
FileVersion : MAUI.11C.W13.52.MP.V2.F8

Done!
Elapsed: 00:00:12
Reconnect Power/Cable!

Operation : Reset UserCode [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 6 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 83506036AD2F175B1CBAF384E078E1A3
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00ED , [GigaDevice] GD25LQ64
[0] : FLASH_DIE : 00C8 0060 0017 0000
[0] : FLASH_LEN : 0x00800000
SDS_INFO : 0x007FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000

Backup done
Read ExtData
Sorting ExtData
Sort Ok, Rebuild Ok
Restore ExtData
All done
UserCode request removed
UserCode set to default ( 0000 or 1122 )

Done!
Elapsed: 00:00:19
Reconnect Power/Cable!

A.G.Shahid · 12-08-2021, 08:49

Card found : S/N : 73CA70CC , v0150
Chinese Miracle II [MTK module] v 1.58

Load File
File_Info : FISE61D_11C_PCB01_gprs_MT6261_S00.MAUI_11C_W13_52_ MP_V2_F9.bin
FileVersion : MAUI.11C.W13.52.MP.V2.F9
Load File Ok

Operation : Flash [ v1.58 ]

======= Flash
Files set for flashing :
[ MCU ] : FISE61D_11C_PCB01_gprs_MT6261_S00.MAUI_11C_W13_52_ MP_V2_F9.bin

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 6 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : BAACFE90DD705A36E8D1DCD1F0EDB2EA
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00EC , [GigaDevice] GD25LQ32
[0] : FLASH_DIE : 00C8 0060 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000

File_Info : FISE61D_11C_PCB01_gprs_MT6261_S00.MAUI_11C_W13_52_ MP_V2_F9.bin
FileVersion : MAUI.11C.W13.52.MP.V2.F9
Flash now

Erase region , wait ...
Write data , wait ...
Write : FISE61D_11C_PCB01_gprs_MT6261_S00.MAUI_11C_W13_52_ MP_V2_F9.bin

Done!
Elapsed: 00:00:47
Reconnect Power/Cable!

A.G.Shahid · 12-08-2021, 09:05

Card found : S/N : 73CA70CC , v0150
Chinese Miracle II [MTK module] v 1.58

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 10 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 4082D2464360114F8A1C774090B3FDC3
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00EC , [GigaDevice] GD25LQ32
[0] : FLASH_DIE : 00C8 0060 0016 0000
[0] : FLASH_LEN : 0x00400000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000

File_Info : M915_4_61D_11C_128X160_PCB01_gprs_MT6261_S00.M915_4_61D_11C_ 128X160.bin
FileVersion : M915_4_61D_11C_128X160

Done!
Elapsed: 00:00:07
Reconnect Power/Cable!

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 10 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 4082D2464360114F8A1C774090B3FDC3
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00EC , [GigaDevice] GD25LQ32
[0] : FLASH_DIE : 00C8 0060 0016 0000
[0] : FLASH_LEN : 0x00400000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now ...

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info : M915_4_61D_11C_128X160_PCB01_gprs_MT6261_S00.M915_ 4_61D_11C_128X160.bin
FileVersion : M915_4_61D_11C_128X160
Saved to : C:\InfinityBox\CM2MTK\Read_out\M915_4_61D_11C_128X 160_PCB01_gprs_MT6261_S00.M915_4_61D_11C_128X160.b in

Done!
Elapsed: 00:00:17
Reconnect Power/Cable!

yuranc8 · 12-08-2021, 11:53

Code:

Card found : 5C203D37 , v0151
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
Enter SVC ... 
Waiting Device ... 
Check SVC ... 
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : MZ_VDC_P932K20V1.0.0B04
Platform Version: MOCORTM_17B_Release_W18.31.3_P25_Debug
Project Version:   sharkle_lp_Smart_Phone
BASE  Version:    FM_BASE_17B_Release_W18.31.3_P25
HW Version:        sc9832e_modem
CMP_Time : 02-12-2019 10:13:56

MODEM TAG : MOCORTM_17B_Release_W18.31.3_P25_Debug_FM_BASE_17B_Release_W18.31.3_P25_sc9832e_modem_sharkle_lp_Smart_Phone

NVMng  : SecurityInfo 
IMEI[1] : 860250041882259
IMEI[2] : 867400020316620
WIFIMAC : B41C30BC7295
BT_MAC  : F8A34FB85018
SEC : SLS:2, SKS:0, SKV:4

SLStatus : 2C
Status : Locked! Server unlock required!

Connecting to server...
Connected
Init...
Init: Ok
Authenticating...
Authenticated
Checking Client version...
Client version Ok
Balance: 16,  price:5
Process...
Finished

Unlocking device ... 
Sync data ... 
Device unlocked!

Done!
Elapsed: 00:01:30

profkefah · 12-08-2021, 14:20

ORIGINAL POSTER
MS-GSM DZGSM

dadarko · 12-08-2021, 18:41

Operation : Identify [ v2.31 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM9)
MODE : BOOTROM
PORT : 9
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 5A0C48669AAD05F7C89D6792DF77A9E4
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 4CF0D349B35F18C9CB089A579D2884F3F3FD8AB9224C77C40F C1BB5694ADB622
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : FF : Look for EMI
BROM : FF : EMI found!
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_k62v1_64_bsp.bin
EMI : CNT : 000B
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A000 [ 232,00 KB ]
DRAM: 0x80000000 [ 2,00 GB ]

EMMC: CID : 150100424A5444345209E1128F9FB717
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 424A54443452
EMMC: VEN : SAMSUNG : BJTD4R
EMMC: SNN : 3776090015 ( 0xE1128F9F) , MF : 11/2020

EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0x747C00000 [ 29,12 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 4596029257BB134E57CC1A057BBF2651

DA : USB : HIGH-SPEED

Boot done!

Product Brand : Redmi
Product Device : dandelion
Product Model : M2006C3LI
Product Name : dandelion_in
Patch Level : QP1A.190711.020
Display ID : QP1A.190711.020
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2021-10-01
Build Time : 08.11.2021
Product Info : dandelion
Product Manfct : Xiaomi
Product Board : dandelion
Board Platform : mt6765

USERDATA : FILESYSTEM : F2FS with FBE ( File-Base Encryption )

NVRAM : LCSH_Q0MP1_MT6762_SP_MDBIN_PCB01_MT6765_S00.MOLY_L R12A_R3_MP_V107_5_P111
NVRAM : 0xB40ADDD0
NVRAM : State : Ok!
NVRAM : SecLv : Vendor Signed
INFO : WiFi MAC : 000000000000
INFO : BlTh MAC : 4CF2021F11EE
INFO : IMEI[1] : 8695
INFO : IMEI[2] : 8695

Backup sensetive data [ 16 ]
Backup path : Backup\MT6765__5A0C48669AAD05F7C89D6792DF77A9E4\
[31] Read : NVRAM
[13] Read : NVDATA
[21] Read : PROINFO
[32] Read : LK
[12] Read : NVCFG
[16] Read : PROTECT1
[17] Read : PROTECT2
[1] Read : PGPT
[19] Read : PERSIST
[0] Read : PRELOADER
Backup done!

STORAGE : Life Status : eMMC : OK!
STORAGE : OTP Status : UNLOCKED!

PRELOADER : DEVICE :
DEV : MT6765
NME : preloader_k62v1_64_bsp.bin
CNT : 000B
EMI : [00] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 512,00 MB ]
EMI : [01] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 2,00 GB ]
EMI : [02] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 2,00 GB ]
EMI : [03] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4,00 GB ]
EMI : [04] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4,00 GB ]
EMI : [05] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 3,00 GB ]
EMI : [06] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4,00 GB ]
EMI : [07] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4,00 GB ]
EMI : [08] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 6,00 GB ]
EMI : [09] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 2,00 GB ]
EMI : [0A] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 3,00 GB ]

Done!
Elapsed: 00:00:43
************************************************** **********

Operation : Reset Settings/Format FS [ v2.31 ]

Mode : SMART RESET EXTRA

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM9)
MODE : BOOTROM
PORT : 9
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 5A0C48669AAD05F7C89D6792DF77A9E4
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 4CF0D349B35F18C9CB089A579D2884F3F3FD8AB9224C77C40F C1BB5694ADB622
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_k62v1_64_bsp.bin
EMI : CNT : 000B
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A000 [ 232,00 KB ]
DRAM: 0x80000000 [ 2,00 GB ]

EMMC: CID : 150100424A5444345209E1128F9FB717
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 424A54443452
EMMC: VEN : SAMSUNG : BJTD4R
EMMC: SNN : 3776090015 ( 0xE1128F9F) , MF : 11/2020

EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0x747C00000 [ 29,12 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 4596029257BB134E57CC1A057BBF2651

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x825657

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA
Format Ok : USERDATA
Format Ok : Vendor Extra

Done!
Elapsed: 00:00:46

Reconnect Power/Cable!

Chijohn · 12-08-2021, 22:14

Please,Before flash what is the problem with the phone because most a16plus file doesn't correct them even on bootloop.

A.G.Shahid · 12-09-2021, 06:36

Card found : 73CA70CC , v0150
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.28

Load IDBase v1121431 Ok!

Update configuration ...
Update Ok!
Load IDBase v1121431 Ok!

Operation : Reset Settings/Format FS [ v2.28 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM16)
MODE : BOOTROM
PORT : 16
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : CD8F20C5F30C4C4544DDA25F4B2D153D
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : CC063304A280F1A1D8A81E672EB0BCFE2A9AB39FF0FD924647 130ED56B36B7ED
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_k65v1_64_bsp_titan_rat.bin
EMI : CNT : 000A
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A000 [ 232,00 KB ]
DRAM: 0x100000000 [ 4,00 GB ]

EMMC: CID : 13014E47314A395238100F4E00BF28F1
EMMC: VEN : MICRON : OEM : 78 : ID : 47314A395238
EMMC: VEN : MICRON : G1J9R8
EMMC: SNN : 256770239 ( 0x0F4E00BF) , MF : 2/2021

EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x01000000 [ 16,00 MB ]
USER : 0xE8F800000 [ 58,24 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 2237114B5661A53774A08CB88F76D134

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x835757

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA

Done!
Elapsed: 00:00:37

Reconnect Power/Cable!

A.G.Shahid · 12-09-2021, 06:37

Card found : 73CA70CC , v0150
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.28

Load IDBase v1121431 Ok!

Update configuration ...
Update Ok!
Load IDBase v1121431 Ok!

Operation : Reset Settings/Format FS [ v2.28 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM16)
MODE : BOOTROM
PORT : 16
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 52BD253D9B090D574C8304802E36FF58
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : E5AC03B9F2EF357BCFF0882D4C365A206763018C6A6ADDF626 B1AA35CF47D036
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_k65v1_64_bsp.bin
EMI : CNT : 0009
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A000 [ 232.00 KB ]
DRAM: 0x100000000 [ 4.00 GB ]

EMMC: CID : 90014A6843396150330110113DD818E3
EMMC: VEN : HYNIX : OEM : 74 : ID : 684339615033
EMMC: VEN : HYNIX : hC9aP3
EMMC: SNN : 269565400 ( 0x10113DD8) , MF : 1/2021

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0xE8F800000 [ 58.24 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 2AEC7105801133F022A4FEC68C784C4

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x835757

Format Ok : USERDATA
Format Ok : CACHE
Format Ok : RESET PROTECTION
Format Ok : USERDATA

Done!
Elapsed: 00:00:33

Reconnect Power/Cable!

12-08-2021, 07:35	#68855 (permalink)
Akhtar Ali Jatt No Life Poster Join Date: Jan 2009 Location: Sindh Pakistan Posts: 8,877 Member: 953334 Status: Offline Sonork: 100.1614005 Thanks Meter: 15,424	QSmart : i6i 2020 Operation : Format FS / Reset Settings [ v2.14 ] Mode : Default [ Reset Settings + FRP ] BootMode : FLASH 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion : SPRD3 Boot : INF : QSmart : i6i 2020 Sending Init Boot ... Boot sent! Kick FDL ... BootVersion : Spreadtrum Boot Block version 1.1 Protocol setup ... Port speed : 921600 Sending Flash Boot ... Boot sent! Kick FLASH FDL ... FDL : 0x0002 FDL : Control transfered! Boot Done! Wipe Ok : UserData Wipe Ok : Cache Wipe Ok : FRP Reconnect Power/Cable! Done! Elapsed: 00:00:18

12-08-2021, 08:46	#68857 (permalink)
A.G.Shahid No Life Poster Join Date: Nov 2016 Location: ISI Posts: 5,795 Member: 2644066 Status: Offline Thanks Meter: 1,773	Vgo tell i12 reset password done by cm2 Card found : S/N : 73CA70CC , v0150 Chinese Miracle II [MTK module] v 1.58 Operation : Check / Read Info [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey ( '' ) Wait for phone... Phone found! [ 6 ] Sync... Sync Ok, read regs... Inital regs read done Boot Info : BB_CPU_ID : 6261 BB_CPU_HW : CB01 BB_CPU_SW : 0001 BB_CPU_SB : 8000 BB_CPU_NM : [MediaTek] MT6261_S0000 BB_CPU_SN : 83506036AD2F175B1CBAF384E078E1A3 BROM Protocol Version : 05 Setting... Setting done , result code 0x000E BROM stage done Seek and prepare DownloadAgent DownloadAgent matching HW Found! DA verify and select done Sending DA to target ... DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E SOC_VERIFY : 0xC1 BOOT_STYLE : SF_FLASH_BOOT NOR Flash IC initialized [0] : FLASH_VEN : 0x00ED , [GigaDevice] GD25LQ64 [0] : FLASH_DIE : 00C8 0060 0017 0000 [0] : FLASH_LEN : 0x00800000 SDS_INFO : 0x007FE000 , 0x00002000 INT_RAM : 0x0000D000 EXT_RAM : 0x00400000 File_Info : FISE61A_11C_PCB01_gprs_MT6261_S00.MAUI_11C_W13_52_ MP_V2_F8.bin FileVersion : MAUI.11C.W13.52.MP.V2.F8 Done! Elapsed: 00:00:12 Reconnect Power/Cable! Operation : Reset UserCode [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey ( '' ) Wait for phone... Phone found! [ 6 ] Sync... Sync Ok, read regs... Inital regs read done Boot Info : BB_CPU_ID : 6261 BB_CPU_HW : CB01 BB_CPU_SW : 0001 BB_CPU_SB : 8000 BB_CPU_NM : [MediaTek] MT6261_S0000 BB_CPU_SN : 83506036AD2F175B1CBAF384E078E1A3 BROM Protocol Version : 05 Setting... Setting done , result code 0x000E BROM stage done Seek and prepare DownloadAgent DownloadAgent matching HW Found! DA verify and select done Sending DA to target ... DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E SOC_VERIFY : 0xC1 BOOT_STYLE : SF_FLASH_BOOT NOR Flash IC initialized [0] : FLASH_VEN : 0x00ED , [GigaDevice] GD25LQ64 [0] : FLASH_DIE : 00C8 0060 0017 0000 [0] : FLASH_LEN : 0x00800000 SDS_INFO : 0x007FE000 , 0x00002000 INT_RAM : 0x0000D000 EXT_RAM : 0x00400000 Backup done Read ExtData Sorting ExtData Sort Ok, Rebuild Ok Restore ExtData All done UserCode request removed UserCode set to default ( 0000 or 1122 ) Done! Elapsed: 00:00:19 Reconnect Power/Cable!

12-08-2021, 08:49	#68858 (permalink)
A.G.Shahid No Life Poster Join Date: Nov 2016 Location: ISI Posts: 5,795 Member: 2644066 Status: Offline Thanks Meter: 1,773	Vgo Tel I252 Full Flash Done By Cm2 Card found : S/N : 73CA70CC , v0150 Chinese Miracle II [MTK module] v 1.58 Load File File_Info : FISE61D_11C_PCB01_gprs_MT6261_S00.MAUI_11C_W13_52_ MP_V2_F9.bin FileVersion : MAUI.11C.W13.52.MP.V2.F9 Load File Ok Operation : Flash [ v1.58 ] ======= Flash Files set for flashing : [ MCU ] : FISE61D_11C_PCB01_gprs_MT6261_S00.MAUI_11C_W13_52_ MP_V2_F9.bin 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey ( '*' ) Wait for phone... Phone found! [ 6 ] Sync... Sync Ok, read regs... Inital regs read done Boot Info : BB_CPU_ID : 6261 BB_CPU_HW : CB01 BB_CPU_SW : 0001 BB_CPU_SB : 8000 BB_CPU_NM : [MediaTek] MT6261_S0000 BB_CPU_SN : BAACFE90DD705A36E8D1DCD1F0EDB2EA BROM Protocol Version : 05 Setting... Setting done , result code 0x000E BROM stage done Seek and prepare DownloadAgent DownloadAgent matching HW Found! DA verify and select done Sending DA to target ... DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E SOC_VERIFY : 0xC1 BOOT_STYLE : SF_FLASH_BOOT NOR Flash IC initialized [0] : FLASH_VEN : 0x00EC , [GigaDevice] GD25LQ32 [0] : FLASH_DIE : 00C8 0060 0016 0000 [0] : FLASH_LEN : 0x00400000 SDS_INFO : 0x003FE000 , 0x00002000 INT_RAM : 0x0000D000 EXT_RAM : 0x00400000 File_Info : FISE61D_11C_PCB01_gprs_MT6261_S00.MAUI_11C_W13_52_ MP_V2_F9.bin FileVersion : MAUI.11C.W13.52.MP.V2.F9 Flash now Erase region , wait ... Write data , wait ... Write : FISE61D_11C_PCB01_gprs_MT6261_S00.MAUI_11C_W13_52_ MP_V2_F9.bin Done! Elapsed: 00:00:47 Reconnect Power/Cable!

12-08-2021, 09:05	#68859 (permalink)
A.G.Shahid No Life Poster Join Date: Nov 2016 Location: ISI Posts: 5,795 Member: 2644066 Status: Offline Thanks Meter: 1,773	Copy Nokia 105 Ta 1174 Read Flash File Done By CM2 Card found : S/N : 73CA70CC , v0150 Chinese Miracle II [MTK module] v 1.58 Operation : Check / Read Info [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey ( '' ) Wait for phone... Phone found! [ 10 ] Sync... Sync Ok, read regs... Inital regs read done Boot Info : BB_CPU_ID : 6261 BB_CPU_HW : CB01 BB_CPU_SW : 0001 BB_CPU_SB : 8000 BB_CPU_NM : [MediaTek] MT6261_S0000 BB_CPU_SN : 4082D2464360114F8A1C774090B3FDC3 BROM Protocol Version : 05 Setting... Setting done , result code 0x000E BROM stage done Seek and prepare DownloadAgent DownloadAgent matching HW Found! DA verify and select done Sending DA to target ... DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E SOC_VERIFY : 0xC1 BOOT_STYLE : SF_FLASH_BOOT NOR Flash IC initialized [0] : FLASH_VEN : 0x00EC , [GigaDevice] GD25LQ32 [0] : FLASH_DIE : 00C8 0060 0016 0000 [0] : FLASH_LEN : 0x00400000 INT_RAM : 0x0000D000 EXT_RAM : 0x00400000 File_Info : M915_4_61D_11C_128X160_PCB01_gprs_MT6261_S00.M915_4_61D_11C_ 128X160.bin FileVersion : M915_4_61D_11C_128X160* Done! Elapsed: 00:00:07 Reconnect Power/Cable! Operation : Read Flash [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey ( '*' ) Wait for phone... Phone found! [ 10 ] Sync... Sync Ok, read regs... Inital regs read done Boot Info : BB_CPU_ID : 6261 BB_CPU_HW : CB01 BB_CPU_SW : 0001 BB_CPU_SB : 8000 BB_CPU_NM : [MediaTek] MT6261_S0000 BB_CPU_SN : 4082D2464360114F8A1C774090B3FDC3 BROM Protocol Version : 05 Setting... Setting done , result code 0x000E BROM stage done Seek and prepare DownloadAgent DownloadAgent matching HW Found! DA verify and select done Sending DA to target ... DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E SOC_VERIFY : 0xC1 BOOT_STYLE : SF_FLASH_BOOT NOR Flash IC initialized [0] : FLASH_VEN : 0x00EC , [GigaDevice] GD25LQ32 [0] : FLASH_DIE : 00C8 0060 0016 0000 [0] : FLASH_LEN : 0x00400000 INT_RAM : 0x0000D000 EXT_RAM : 0x00400000 Reading Flash Content now ... Read Flash now Read Ok , 4194304 bytes read Check and collect compile info File_Info : M915_4_61D_11C_128X160_PCB01_gprs_MT6261_S00.M915_ 4_61D_11C_128X160.bin FileVersion : M915_4_61D_11C_128X160 Saved to : C:\InfinityBox\CM2MTK\Read_out\M915_4_61D_11C_128X 160_PCB01_gprs_MT6261_S00.M915_4_61D_11C_128X160.b in Done! Elapsed: 00:00:17 Reconnect Power/Cable!

12-08-2021, 14:20	#68861 (permalink)
profkefah No Life Poster Join Date: Mar 2015 Location: Islam Age: 35 Posts: 7,401 Member: 2371500 Status: Offline Thanks Meter: 5,806	Itel a16+write firmware done ORIGINAL POSTER MS-GSM DZGSM

12-08-2021, 18:41	#68862 (permalink)
dadarko Freak Poster Join Date: Jan 2017 Posts: 359 Member: 2671513 Status: Offline Thanks Meter: 121	redmi 9a ( M2006C3LI ) : identify + smart reset extra ok Operation : Identify [ v2.31 ] Mode : FLASH 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port_V1632 (COM9) MODE : BOOTROM PORT : 9 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 CODE : Cervino TYPE : MODERN [RAPHAEL] BROM : MEID : 5A0C48669AAD05F7C89D6792DF77A9E4 BROM : SecLevel : 0x000000E7 BROM : SecMode : SBC+SLA+SDA+EXT BROM : BROM\|BL : 0x05\|0xFE BROM : BOOTROM BROM : SOCID : 4CF0D349B35F18C9CB089A579D2884F3F3FD8AB9224C77C40F C1BB5694ADB622 BROM : SLA : Local Auth BROM : SLA : Starting Auth BROM : FF : Look for EMI BROM : FF : EMI found! BROM : SLA : Auth Passed! BROM : SEC : 0x000000E0 AGENT : 0_base : BASE_v2112 \| Manual : Disabled AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6765 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : BROM DA : EXT_RAM NOT initialized! EMI : DEV : FireFly EMI : SRC : preloader_k62v1_64_bsp.bin EMI : CNT : 000B EMI : Init EMI from INTERNAL DB EMI : EXT_RAM CFG Passed! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x0003A000 [ 232,00 KB ] DRAM: 0x80000000 [ 2,00 GB ] EMMC: CID : 150100424A5444345209E1128F9FB717 EMMC: VEN : SAMSUNG : OEM : 0 : ID : 424A54443452 EMMC: VEN : SAMSUNG : BJTD4R EMMC: SNN : 3776090015 ( 0xE1128F9F) , MF : 11/2020 EMMC: BOOT1 : 0x00400000 [ 4,00 MB ] BOOT2 : 0x00400000 [ 4,00 MB ] RPMB : 0x00400000 [ 4,00 MB ] USER : 0x747C00000 [ 29,12 GB ] CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 4596029257BB134E57CC1A057BBF2651 DA : USB : HIGH-SPEED Boot done! Product Brand : Redmi Product Device : dandelion Product Model : M2006C3LI Product Name : dandelion_in Patch Level : QP1A.190711.020 Display ID : QP1A.190711.020 Ver. CodeName : REL Ver. Release : 10 Sec. Patch : 2021-10-01 Build Time : 08.11.2021 Product Info : dandelion Product Manfct : Xiaomi Product Board : dandelion Board Platform : mt6765 USERDATA : FILESYSTEM : F2FS with FBE ( File-Base Encryption ) NVRAM : LCSH_Q0MP1_MT6762_SP_MDBIN_PCB01_MT6765_S00.MOLY_L R12A_R3_MP_V107_5_P111 NVRAM : 0xB40ADDD0 NVRAM : State : Ok! NVRAM : SecLv : Vendor Signed INFO : WiFi MAC : 000000000000 INFO : BlTh MAC : 4CF2021F11EE INFO : IMEI[1] : 8695 INFO : IMEI[2] : 8695 Backup sensetive data [ 16 ] Backup path : Backup\MT6765__5A0C48669AAD05F7C89D6792DF77A9E4\ [31] Read : NVRAM [13] Read : NVDATA [21] Read : PROINFO [32] Read : LK [12] Read : NVCFG [16] Read : PROTECT1 [17] Read : PROTECT2 [1] Read : PGPT [19] Read : PERSIST [0] Read : PRELOADER Backup done! STORAGE : Life Status : eMMC : OK! STORAGE : OTP Status : UNLOCKED! PRELOADER : DEVICE : DEV : MT6765 NME : preloader_k62v1_64_bsp.bin CNT : 000B EMI : [00] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 512,00 MB ] EMI : [01] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 2,00 GB ] EMI : [02] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 2,00 GB ] EMI : [03] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 4,00 GB ] EMI : [04] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 4,00 GB ] EMI : [05] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 3,00 GB ] EMI : [06] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 4,00 GB ] EMI : [07] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 4,00 GB ] EMI : [08] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 6,00 GB ] EMI : [09] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 2,00 GB ] EMI : [0A] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 3,00 GB ] Done! Elapsed: 00:00:43 ************************************************ ******** Operation : Reset Settings/Format FS [ v2.31 ] Mode : SMART RESET EXTRA 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port_V1632 (COM9) MODE : BOOTROM PORT : 9 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 CODE : Cervino TYPE : MODERN [RAPHAEL] BROM : MEID : 5A0C48669AAD05F7C89D6792DF77A9E4 BROM : SecLevel : 0x000000E7 BROM : SecMode : SBC+SLA+SDA+EXT BROM : BROM\|BL : 0x05\|0xFE BROM : BOOTROM BROM : SOCID : 4CF0D349B35F18C9CB089A579D2884F3F3FD8AB9224C77C40F C1BB5694ADB622 BROM : SLA : Local Auth BROM : SLA : Starting Auth BROM : SLA : Auth Passed! BROM : SEC : 0x000000E0 AGENT : 0_base : BASE_v2112 \| Manual : Disabled AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6765 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : BROM DA : EXT_RAM NOT initialized! EMI : DEV : FireFly EMI : SRC : preloader_k62v1_64_bsp.bin EMI : CNT : 000B EMI : Init EMI from INTERNAL DB EMI : EXT_RAM CFG Passed! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x0003A000 [ 232,00 KB ] DRAM: 0x80000000 [ 2,00 GB ] EMMC: CID : 150100424A5444345209E1128F9FB717 EMMC: VEN : SAMSUNG : OEM : 0 : ID : 424A54443452 EMMC: VEN : SAMSUNG : BJTD4R EMMC: SNN : 3776090015 ( 0xE1128F9F) , MF : 11/2020 EMMC: BOOT1 : 0x00400000 [ 4,00 MB ] BOOT2 : 0x00400000 [ 4,00 MB ] RPMB : 0x00400000 [ 4,00 MB ] USER : 0x747C00000 [ 29,12 GB ] CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 4596029257BB134E57CC1A057BBF2651 DA : USB : HIGH-SPEED Boot done! SmartInfo : 0x825657 Format Ok : RESET PROTECTION Format Ok : USERDATA Format Ok : CACHE Format Ok : USERDATA Format Ok : USERDATA Format Ok : Vendor Extra Done! Elapsed: 00:00:46 Reconnect Power/Cable!

12-08-2021, 22:14	#68863 (permalink)
Chijohn Freak Poster Join Date: May 2020 Location: Globe Posts: 260 Member: 2955840 Status: Online Thanks Meter: 83	Please,Before flash what is the problem with the phone because most a16plus file doesn't correct them even on bootloop.

12-09-2021, 06:36	#68864 (permalink)
A.G.Shahid No Life Poster Join Date: Nov 2016 Location: ISI Posts: 5,795 Member: 2644066 Status: Offline Thanks Meter: 1,773	Samsung sm a125f a12 reset frp done by cm2 Card found : 73CA70CC , v0150 Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.28 Load IDBase v1121431 Ok! Update configuration ... Update Ok! Load IDBase v1121431 Ok! Operation : Reset Settings/Format FS [ v2.28 ] Mode : SMART RESET 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port (COM16) MODE : BOOTROM PORT : 16 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 CODE : Cervino TYPE : MODERN [RAPHAEL] BROM : MEID : CD8F20C5F30C4C4544DDA25F4B2D153D BROM : SecLevel : 0x000000E5 BROM : SecMode : SBC+SDA+EXT BROM : BROM\|BL : 0x05\|0xFE BROM : BOOTROM BROM : SOCID : CC063304A280F1A1D8A81E672EB0BCFE2A9AB39FF0FD924647 130ED56B36B7ED BROM : SLA : Local Auth BROM : SLA : Auth Started! BROM : SLA : Auth Passed! BROM : SLA : 0x0000001F AGENT : 0_base : BASE_v2112 \| Manual : Disabled AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6765 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : BROM DA : EXT_RAM NOT initialized! EMI : DEV : FireFly EMI : SRC : preloader_k65v1_64_bsp_titan_rat.bin EMI : CNT : 000A EMI : Init EMI from INTERNAL DB EMI : EXT_RAM CFG Passed! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x0003A000 [ 232,00 KB ] DRAM: 0x100000000 [ 4,00 GB ] EMMC: CID : 13014E47314A395238100F4E00BF28F1 EMMC: VEN : MICRON : OEM : 78 : ID : 47314A395238 EMMC: VEN : MICRON : G1J9R8 EMMC: SNN : 256770239 ( 0x0F4E00BF) , MF : 2/2021 EMMC: BOOT1 : 0x00400000 [ 4,00 MB ] BOOT2 : 0x00400000 [ 4,00 MB ] RPMB : 0x01000000 [ 16,00 MB ] USER : 0xE8F800000 [ 58,24 GB ] CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 2237114B5661A53774A08CB88F76D134 DA : USB : HIGH-SPEED Boot done! SmartInfo : 0x835757 Format Ok : RESET PROTECTION Format Ok : USERDATA Format Ok : CACHE Format Ok : USERDATA Done! Elapsed: 00:00:37 Reconnect Power/Cable!

12-09-2021, 06:37	#68865 (permalink)
A.G.Shahid No Life Poster Join Date: Nov 2016 Location: ISI Posts: 5,795 Member: 2644066 Status: Offline Thanks Meter: 1,773	Vivo v2026 remove frp done by cm2 Card found : 73CA70CC , v0150 Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.28 Load IDBase v1121431 Ok! Update configuration ... Update Ok! Load IDBase v1121431 Ok! Operation : Reset Settings/Format FS [ v2.28 ] Mode : SMART RESET 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port (COM16) MODE : BOOTROM PORT : 16 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 CODE : Cervino TYPE : MODERN [RAPHAEL] BROM : MEID : 52BD253D9B090D574C8304802E36FF58 BROM : SecLevel : 0x000000E5 BROM : SecMode : SBC+SDA+EXT BROM : BROM\|BL : 0x05\|0xFE BROM : BOOTROM BROM : SOCID : E5AC03B9F2EF357BCFF0882D4C365A206763018C6A6ADDF626 B1AA35CF47D036 BROM : SLA : Local Auth BROM : SLA : Auth Started! BROM : SLA : Auth Passed! BROM : SLA : 0x0000001F AGENT : 0_base : BASE_v2112 \| Manual : Disabled AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6765 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : BROM DA : EXT_RAM NOT initialized! EMI : DEV : FireFly EMI : SRC : preloader_k65v1_64_bsp.bin EMI : CNT : 0009 EMI : Init EMI from INTERNAL DB EMI : EXT_RAM CFG Passed! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x0003A000 [ 232.00 KB ] DRAM: 0x100000000 [ 4.00 GB ] EMMC: CID : 90014A6843396150330110113DD818E3 EMMC: VEN : HYNIX : OEM : 74 : ID : 684339615033 EMMC: VEN : HYNIX : hC9aP3 EMMC: SNN : 269565400 ( 0x10113DD8) , MF : 1/2021 EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x01000000 [ 16.00 MB ] USER : 0xE8F800000 [ 58.24 GB ] CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 2AEC7105801133F022A4FEC68C784C4 DA : USB : HIGH-SPEED Boot done! SmartInfo : 0x835757 Format Ok : USERDATA Format Ok : CACHE Format Ok : RESET PROTECTION Format Ok : USERDATA Done! Elapsed: 00:00:33 Reconnect Power/Cable!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unlocking 5190	Ryu	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	23	01-07-2018 17:14
news headlines to gsm phone	mos	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	7	05-22-2016 11:42
my 8810 is phone locked ,can somebody please help	duyphuc	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	18	12-23-2014 09:03
need software for 5161 by cable	mln2000	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	08-29-2010 20:17