GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box
Reload this Page Successfully unlocked/repaired phones by Infinity-Box
Register FAQDonate Forum Rules Root any Device ★iPhone Unlock★ ★ Direct Codes ★ Direct Unlock Source


Reply
Page 4740 of 5074 « First 37404240464046904730473747384739 4740 474147424743475047904840 Last »
 
LinkBack Thread Tools Display Modes
Old 05-26-2022, 13:59   #71086 (permalink)
No Life Poster
 
Nadeem Waris's Avatar
 
Join Date: Jul 2009
Location: SINDH PAKISTAN
Posts: 7,462
Member: 1080718
Status: Offline
Sonork: 100.1596539 QQ-2710826805
Thanks Meter: 2,247
HBL BM5500 flash done

Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 21 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483847346132A5C3D429C96551
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , 2a4G8
[eMMC] : FLASH_CID : 90014A483847346132A5C3D429C96551
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0x033C52177553938D1BC55F9E820E4AB4
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6580 , Project : Pack1 , Storage : EMMC
Setting : Flash Pre-Erase : Off ( Write Flash Only )
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Skip checking by User request!

BL : BatteryLevel : 4065 mV
BL : BatteryLevel Ok

SecCfg Passed , 1799
BMT remark not need. Will skip

Preloader Download skipped by user request!
PartCount : 0014
Update PMT by user request
Repartition Done!
Use FLN Mode

Processing : Flash Write
Flash now : LK
Image Flash Ok
Flash now : BOOT
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : SECRO
Image Flash Ok
Flash now : SYSTEM
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USERDATA
Image Flash Ok
Flash Write Done, time used : 00:07:07

Processing : Verify
Verify Passed : LK
Verify Passed : BOOT
Verify Passed : RECOVERY
Verify Passed : LOGO
Verify Passed : SECRO
Verify Passed : SYSTEM
Verify Passed : CACHE
Verify Passed : USERDATA
Data Verify Done, time used : 00:00:03

Update Mirror PMT
Update Done!

Update RomInfo done

Done!
Elapsed: 00:07:23
Reconnect Power/Cable!
  Reply With Quote
Old 05-26-2022, 14:52   #71087 (permalink)
No Life Poster
 
Join Date: Sep 2021
Location: Germany
Posts: 627
Member: 2996196
Status: Offline
Thanks Meter: 632
Arrow ITEL it5081 READ USERCODE DONE BY CM2
Operation : Read UserCode [ v1.07 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 653x NOR v1.3(c)2019
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q64 : 0x00800000 [ 8MiB ]

Reading data ...
STATE : NOT ACTIVE : CODE : 1420

Done!
Elapsed: 00:00:26

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to Jacobkamudyariw For This Useful Post:
Old 05-26-2022, 15:54   #71088 (permalink)
No Life Poster
 
tayobjoy1's Avatar
 
Join Date: Aug 2020
Location: Mozambique
Age: 20
Posts: 967
Member: 2965136
Status: Offline
Sonork: 58846
Thanks Meter: 1,202
Nokia 105 4G TA-1385 SP Unlock Done
Code:
Card found : 46828B86 , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Operation : Identify [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
Enter SVC ... 
Waiting Device ... 
Check SVC ... 
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Platform Version: MOCOR_20A_MP_KN4_W21.30.6_Release
Software Version: 13.00.17.01
BASE     Version: FM_BASE_20A_THIN_MODEM_KN4_W21.30.6
HW       Version: UMS9117
buildtime:08-06-2021 03:48:40
Platform Version: MOCOR_20A_MP_KN4_W21.30.6_Release
BASE     Version: FM_BASE_20A_THIN_MODEM_KN4_W21.30.6
HW       Version: UMS9117

MODEM TAG : MOCOR_20A_MP_KN4_W21.30.6_Release_FM_BASE_20A_THIN_MODEM_KN4_W21.30.6_UMS9117


PSN1 : A8EA35FLU
PSN2 : A8EA35FLU

NVMng  : SecurityInfo 
IMEI[1] : 358530925043899
IMEI[2] : 358530925543898
WIFIMAC : FFFFFFFFFFFF
BT_MAC  : FFFFFFFFFFFF
SEC : SLS:2, SKS:0, SKV:4


Done!
Elapsed: 00:00:26
Code:
Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
Enter SVC ... 
Waiting Device ... 
Check SVC ... 
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Platform Version: MOCOR_20A_MP_KN4_W21.30.6_Release
Software Version: 13.00.17.01
BASE     Version: FM_BASE_20A_THIN_MODEM_KN4_W21.30.6
HW       Version: UMS9117
buildtime:08-06-2021 03:48:40
Platform Version: MOCOR_20A_MP_KN4_W21.30.6_Release
BASE     Version: FM_BASE_20A_THIN_MODEM_KN4_W21.30.6
HW       Version: UMS9117

MODEM TAG : MOCOR_20A_MP_KN4_W21.30.6_Release_FM_BASE_20A_THIN_MODEM_KN4_W21.30.6_UMS9117

NVMng  : SecurityInfo 
IMEI[1] : 358530925043899
IMEI[2] : 358530925543898
WIFIMAC : FFFFFFFFFFFF
BT_MAC  : FFFFFFFFFFFF
SEC : SLS:2, SKS:0, SKV:4

SLStatus : 2C
Status : Locked! Server unlock required!

Connecting to server...
Connected
Init...
Init: Ok
Authenticating...
Authenticated
Checking Client version...
Client version Ok
Balance: 25,  price:5
Process...
Finished

Unlocking device ... 
Sync data ... 
Device unlocked!

Done!
Elapsed: 00:00:32
  Reply With Quote
The Following 2 Users Say Thank You to tayobjoy1 For This Useful Post:
Old 05-26-2022, 22:39   #71089 (permalink)
No Life Poster
 
tayobjoy1's Avatar
 
Join Date: Aug 2020
Location: Mozambique
Age: 20
Posts: 967
Member: 2965136
Status: Offline
Sonork: 58846
Thanks Meter: 1,202
Spark 5 Air SMART RESET Done
Code:
Card found : 46828B86 , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34

Load IDBase v312457 Ok!

UserName and/or Password not set! Can't continue!

Load IDBase v312457 Ok!


Operation : Identify [ v2.34 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM3)
MODE : BOOTROM
PORT : 3
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
     CODE : Merlot
     TYPE : MODERN [RAPHAEL]
BROM : MEID : F3CE60DC93D3FC1F7FC2FF4AAA38ACFF
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 644873F88938F8B3C640054314E6AD3256D81112DC294B048C030138C34910D7
BROM : Sending FireFly 
FireFly : Starting ...  
FireFly : Init Core
FireFly : Core init done!
FireFly : Running : v05.05.05 on MT6761
FireFly : eMMC init passed!

        EMMC: CSD : D02701320F5903FFF6DBFFEF8E40400D
        EMMC: CSD : TEMP_WRITE_PROTECT: False
        EMMC: CSD : PERM_WRITE_PROTECT: False

        EMMC: CID : 150100515836334142037253C0A9C74F
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 515836334142 : PRV : 0x03
        EMMC: VEN : SAMSUNG : QX63AB
        EMMC: SNN : 1918091433 ( 0x7253C0A9 ) , MF : 12/2020

        EMMC: EXTCSD : rev1.8 ( eMMC 5.1 )
        EMMC: EXTCSD [CONFIG] : 0x48,  0x02,  0x01
        EMMC: EXTCSD [PARTITION_CONFIG] : 0x48
        EMMC: EXTCSD [BOOT_BUS_WIDTH]   : 0x02
        EMMC: EXTCSD [RST_N_FUNCTION]    : 0x01
        EMMC: EXTCSD [PART_S_COMPLETED] : False
        EMMC: EXTCSD [SIZE] : Market    : 32 GB
        EMMC: EXTCSD [SIZE] : Actual    : 0x747C00000  [ 29,12 GB ]
        EMMC: EXTCSD [EOL] : EOL status : Normal  ( Less than 80% reserved blocks used )
        EMMC: EXTCSD [EOL_A] : SLC status : 0% - 10% used
        EMMC: EXTCSD [EOL_B] : MLC status : 0% - 10% used

        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              USER   : 0x747C00000 [ 29,12 GB ]

DA : USB : HIGH-SPEED

Boot done!

Product Brand  : TECNO
Product Device : TECNO-KD6
Product Model  : TECNO KD6
Product Name   : KD6-OP
Patch Level    : QP1A.190711.020
Display ID     : KD6-H6116GHIL-QGo-OP-201211V320
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2020-12-05
Build Time     : 11.12.2020
Product Info   : kd6_h6116
Product Board  : TECNO-KD6
Board Platform : mt6761
Product Manfct : TECNO MOBILE LIMITED

USERDATA : FILESYSTEM : F2FS  with FBE ( File-Base Encryption )

NVRAM : TK_MD_BASIC_MDBIN_PCB01_MT6761_S00.MOLY_LR12A_R3_MP_V101_3_P24
NVRAM : 0xA208BFE5
NVRAM : State : Ok!
INFO  : WiFi MAC : 58356B0921EA
INFO  : BlTh MAC : 58356B0921E9
INFO  : IMEI[1] : 356944960853801
INFO  : IMEI[2] : 356944960853819


Backup sensetive data [ 18 ]
Backup path : Backup\MT6761__F3CE60DC93D3FC1F7FC2FF4AAA38ACFF\
[26] Read : NVRAM
[10] Read : NVDATA
[3] Read : PROINFO
[27] Read : LK
[9] Read : NVCFG
[12] Read : PROTECT1
[1] Read : PGPT
[11] Read : PERSIST
[0] Read : PRELOADER
Backup done!


Done!
Elapsed: 00:00:25
Code:
Operation : Reset Settings/Format FS [ v2.34 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM3)
MODE : BOOTROM
PORT : 3
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
     CODE : Merlot
     TYPE : MODERN [RAPHAEL]
BROM : MEID : F3CE60DC93D3FC1F7FC2FF4AAA38ACFF
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 644873F88938F8B3C640054314E6AD3256D81112DC294B048C030138C34910D7
BROM : Sending FireFly 
FireFly : Starting ...  
FireFly : Init Core
FireFly : Core init done!
FireFly : Running : v05.05.05 on MT6761
FireFly : eMMC init passed!

        EMMC: CSD : D02701320F5903FFF6DBFFEF8E40400D
        EMMC: CSD : TEMP_WRITE_PROTECT: False
        EMMC: CSD : PERM_WRITE_PROTECT: False

        EMMC: CID : 150100515836334142037253C0A9C74F
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 515836334142 : PRV : 0x03
        EMMC: VEN : SAMSUNG : QX63AB
        EMMC: SNN : 1918091433 ( 0x7253C0A9 ) , MF : 12/2020

        EMMC: EXTCSD : rev1.8 ( eMMC 5.1 )
        EMMC: EXTCSD [CONFIG] : 0x48,  0x02,  0x01
        EMMC: EXTCSD [PARTITION_CONFIG] : 0x48
        EMMC: EXTCSD [BOOT_BUS_WIDTH]   : 0x02
        EMMC: EXTCSD [RST_N_FUNCTION]    : 0x01
        EMMC: EXTCSD [PART_S_COMPLETED] : False
        EMMC: EXTCSD [SIZE] : Market    : 32 GB
        EMMC: EXTCSD [SIZE] : Actual    : 0x747C00000  [ 29,12 GB ]
        EMMC: EXTCSD [EOL] : EOL status : Normal  ( Less than 80% reserved blocks used )
        EMMC: EXTCSD [EOL_A] : SLC status : 0% - 10% used
        EMMC: EXTCSD [EOL_B] : MLC status : 0% - 10% used

        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              USER   : 0x747C00000 [ 29,12 GB ]

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x825657

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA
Format Ok : USERDATA

Done!
Elapsed: 00:00:35
  Reply With Quote
The Following 2 Users Say Thank You to tayobjoy1 For This Useful Post:
Old 05-27-2022, 06:03   #71090 (permalink)
No Life Poster
 
Nadeem Waris's Avatar
 
Join Date: Jul 2009
Location: SINDH PAKISTAN
Posts: 7,462
Member: 1080718
Status: Offline
Sonork: 100.1596539 QQ-2710826805
Thanks Meter: 2,247
oppoA15 smart reset done
Operation : Reset Settings/Format FS [ v2.34 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM30)
MODE : BOOTROM
PORT : 30
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 4778D6271E1037DE790B575699D7F8CB
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 192D37BDF51D02B403DFB7CBCA3EE763479B7CF0E385CF3D76 9F34980684CB71
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : FF : Look for EMI
BROM : FF : EMI found!
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!

EMMC: CID : 90014A68423861503E03004679016849
EMMC: VEN : HYNIX : OEM : 74 : ID : 68423861503E : PRV : 0x03
EMMC: VEN : HYNIX : hB8aP>
EMMC: SNN : 4618497 ( 0x00467901 ) , MF : 6/2021

EMI : DEV : FireFly
EMI : SRC : preloader_oppo6765.bin
EMI : CNT : 000B
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A000 [ 232.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: CID : 90014A68423861503E03004679016849
EMMC: VEN : HYNIX : OEM : 74 : ID : 68423861503E : PRV : 0x03
EMMC: VEN : HYNIX : hB8aP>
EMMC: SNN : 4618497 ( 0x00467901 ) , MF : 6/2021

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 9C166AE8F54923B8DD48065E20DC3E93

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x825757

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA
Format Ok : USERDATA

Done!
Elapsed: 00:00:39

Reconnect Power/Cable!
  Reply With Quote
Old 05-27-2022, 07:22   #71091 (permalink)
No Life Poster
 
Nadeem Waris's Avatar
 
Join Date: Jul 2009
Location: SINDH PAKISTAN
Posts: 7,462
Member: 1080718
Status: Offline
Sonork: 100.1596539 QQ-2710826805
Thanks Meter: 2,247
oppo A5s smart reset done
Operation : Reset Settings/Format FS [ v2.34 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM10)
MODE : BOOTROM
PORT : 10
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : E4540ABC75E66E039A959F77AC838F78
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 19FE08006C93BF7B26E059281BC7E9FCA5A86221FEDF6A7869 D13725CDA7BFAC
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : FF : Look for EMI
BROM : FF : EMI found!
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!

EMMC: CID : 150100514436334D4203C610A8B5762B
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 514436334D42 : PRV : 0x03
EMMC: VEN : SAMSUNG : QD63MB
EMMC: SNN : 3322980533 ( 0xC610A8B5 ) , MF : 7/2019

EMI : DEV : FireFly
EMI : SRC : preloader_oppo6765_18511.bin
EMI : CNT : 0009
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A000 [ 232.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: CID : 150100514436334D4203C610A8B5762B
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 514436334D42 : PRV : 0x03
EMMC: VEN : SAMSUNG : QD63MB
EMMC: SNN : 3322980533 ( 0xC610A8B5 ) , MF : 7/2019

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 231099DFA09ABC677191582F333F753

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x805757

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA

Done!
Elapsed: 00:00:48

Reconnect Power/Cable!
  Reply With Quote
Old 05-27-2022, 09:50   #71092 (permalink)
No Life Poster
 
azhergoga007's Avatar
 
Join Date: Jan 2011
Location: lullipapi
Posts: 8,670
Member: 1489030
Status: Offline
Sonork: 100.1649409
Thanks Meter: 5,368
Oppo A15 MT6567 FRP/Pattren Reset Done With King Infinity CM2


Code:
Card found : A19EC787 , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34

Load IDBase v312457 Ok!

UserName and/or Password not set! Can't continue!

Load IDBase v312457 Ok!

Operation : Reset Settings/Format FS [ v2.34 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM12)
MODE : BOOTROM
PORT : 12
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM

Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!


Operation : Reset Settings/Format FS [ v2.34 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM12)
MODE : BOOTROM
PORT : 12
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN [RAPHAEL]
BROM : MEID : AB327ACF48882A1E37DAEDB202EA37E9
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 94E16EE5B6F7241E72C4074D141B95DFE60E1FF209788EF9A76C7B18CC07B4C6
BROM : SLA : Local Auth 
BROM : SLA : Starting Auth 
BROM : FF : Look for EMI
BROM : FF : EMI found!
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!

        EMMC: CID : 90014A68423861503E030018ABFA58E9
        EMMC: VEN : HYNIX : OEM : 74 : ID : 68423861503E : PRV : 0x03
        EMMC: VEN : HYNIX : hB8aP>
        EMMC: SNN : 1616890 ( 0x0018ABFA ) , MF : 5/2021

     EMI : DEV : FireFly
     EMI : SRC : preloader_oppo6765.bin
     EMI : CNT : 000C
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0xC0000000 [ 3.00 GB ]

        EMMC: CID : 90014A68423861503E030018ABFA58E9
        EMMC: VEN : HYNIX : OEM : 74 : ID : 68423861503E : PRV : 0x03
        EMMC: VEN : HYNIX : hB8aP>
        EMMC: SNN : 1616890 ( 0x0018ABFA ) , MF : 5/2021

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 794EB38D20A0198AED4201C74A8F87C

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x825757

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA
Format Ok : USERDATA

Done!
Elapsed: 00:00:42

Reconnect Power/Cable!
  Reply With Quote
Old 05-27-2022, 15:28   #71093 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 5,793
Member: 2644066
Status: Offline
Thanks Meter: 1,773
Vivo y1s reset frp done by cm2
Card found : 73CA70CC , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34

Load IDBase v312457 Ok!

Update configuration ...
Load IDBase v312457 Ok!

Operation : Reset Settings/Format FS [ v2.34 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM Port (COM10)
MODE : PRELOADER PORT
PORT : 10
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x03
BROM : PRELOADER PORT
AGENT : Vivo : SEC_MT6765 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0x20000000 [ 512.00 MB ]

EMMC: CID : 90014A68423861503E0300D6438FA76D
EMMC: VEN : HYNIX : OEM : 74 : ID : 68423861503E : PRV : 0x03
EMMC: VEN : HYNIX : hB8aP>
EMMC: SNN : 14041999 ( 0x00D6438F ) , MF : 10/2020

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 301E7D3622954FF1AD6CA3773A13F2AE

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x825757

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA
Format Ok : USERDATA

Done!
Elapsed: 00:00:49

Reconnect Power/Cable!
  Reply With Quote
Old 05-27-2022, 15:30   #71094 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 5,793
Member: 2644066
Status: Offline
Thanks Meter: 1,773
Oppo cph1717 reset frp done by cm2
Card found : 73CA70CC , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34

Load IDBase v312457 Ok!

Update configuration ...
Load IDBase v312457 Ok!

Operation : Reset Settings/Format FS [ v2.34 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM28)
MODE : BOOTROM
PORT : 28
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN [RAPHAEL]
BROM : MEID : B242458402ED763F8F04A68D2310F1A0
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : EMI : Search
BROM : EMI : Found!
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!

EMI : DEV : FireFly
EMI : SRC : preloader_oppo6750_17351.bin
EMI : CNT : 0004
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00038000 [ 224.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: CID : 150100474536424D42033555D01094F1
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 474536424D42 : PRV : 0x03
EMMC: VEN : SAMSUNG : GE6BMB
EMMC: SNN : 894816272 ( 0x3555D010 ) , MF : 9/2017

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x3A3E00000 [ 14.56 GB ]

CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : D4E5C2C435907A18E750A4CA2DFC903

DA : USB : FULL-SPEED
DA : USB : Change Port Speed
PTFN : MediaTek PreLoader USB VCOM (COM29)
MODE : PRELOADER PORT
PORT : 29

Boot done!

SmartInfo : 0x8F5454

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA

Done!
Elapsed: 00:00:38

Reconnect Power/Cable!
  Reply With Quote
Old 05-27-2022, 15:32   #71095 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 5,793
Member: 2644066
Status: Offline
Thanks Meter: 1,773
Oppo reno3 cph2043 reset frf done by cm2
Card found : 73CA70CC , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34

Load IDBase v312457 Ok!

Update configuration ...
Load IDBase v312457 Ok!

Operation : Reset Settings/Format FS [ v2.34 ]

Mode : FRP [ RESET PROTECTION ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM28)
MODE : BOOTROM
PORT : 28
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6779 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000
CODE : Lafite
TYPE : MODERN [RAPHAEL]
BROM : MEID : 713C7658519936797342219F5A2A14C7
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 3E48093967EBA62152DCBCC398C88449D7BA0356D3D396A818 C0716B66C8C291
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6779
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : PRELOADER_INFINITY_0
EMI : CNT : 0001
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00080000 [ 512.00 KB ]
DRAM: 0x200000000 [ 8.00 GB ]

UFS: CE014B4D3856383030314A4D2D423831
UFS:
VEN : 0x01CE
VID : KM8V8001JM-B81
IFW : 1000
LU0 : 0x00400000 [ 4.00 MB ]
LU1 : 0x00400000 [ 4.00 MB ]
LU2 : 0x1DCB000000 [ 119.17 GB ]
FSN : 3cfbea00640d
REG : 0x101010000

CHIP : MT6779 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

RNID : DFE7542C67CC90B9C731E551D84CABC6

DA : USB : HIGH-SPEED

Boot done!

Format Ok : RESET PROTECTION

Done!
Elapsed: 00:00:20
  Reply With Quote
Old 05-27-2022, 19:07   #71096 (permalink)
No Life Poster
 
profkefah's Avatar
 
Join Date: Mar 2015
Location: Islam
Age: 35
Posts: 7,401
Member: 2371500
Status: Offline
Thanks Meter: 5,806
Itel a37 full factory reset done
original poster
MS-GSM dzgsm
  Reply With Quote
The Following User Says Thank You to profkefah For This Useful Post:
Old 05-27-2022, 19:54   #71097 (permalink)
No Life Poster
 
tayobjoy1's Avatar
 
Join Date: Aug 2020
Location: Mozambique
Age: 20
Posts: 967
Member: 2965136
Status: Offline
Sonork: 58846
Thanks Meter: 1,202
Nokia 105 4G TA-1385 SP Unlock Done
Code:
Card found : 46828B86 , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Operation : Identify [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
Enter SVC ... 
Waiting Device ... 
Check SVC ... 
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Platform Version: MOCOR_20A_MP_KN4_W21.30.6_Release
Software Version: 13.00.17.01
BASE     Version: FM_BASE_20A_THIN_MODEM_KN4_W21.30.6
HW       Version: UMS9117
buildtime:08-06-2021 03:48:40
Platform Version: MOCOR_20A_MP_KN4_W21.30.6_Release
BASE     Version: FM_BASE_20A_THIN_MODEM_KN4_W21.30.6
HW       Version: UMS9117

MODEM TAG : MOCOR_20A_MP_KN4_W21.30.6_Release_FM_BASE_20A_THIN_MODEM_KN4_W21.30.6_UMS9117


PSN1 : A912191LU
PSN2 : A912191LU

NVMng  : SecurityInfo 
IMEI[1] : 358530924508694
IMEI[2] : 358530925008694
WIFIMAC : FFFFFFFFFFFF
BT_MAC  : FFFFFFFFFFFF
SEC : SLS:2, SKS:0, SKV:4


Done!
Elapsed: 00:00:34
Code:
Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
Enter SVC ... 
Waiting Device ... 
Check SVC ... 
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Platform Version: MOCOR_20A_MP_KN4_W21.30.6_Release
Software Version: 13.00.17.01
BASE     Version: FM_BASE_20A_THIN_MODEM_KN4_W21.30.6
HW       Version: UMS9117
buildtime:08-06-2021 03:48:40
Platform Version: MOCOR_20A_MP_KN4_W21.30.6_Release
BASE     Version: FM_BASE_20A_THIN_MODEM_KN4_W21.30.6
HW       Version: UMS9117

MODEM TAG : MOCOR_20A_MP_KN4_W21.30.6_Release_FM_BASE_20A_THIN_MODEM_KN4_W21.30.6_UMS9117

NVMng  : SecurityInfo 
IMEI[1] : 358530924508694
IMEI[2] : 358530925008694
WIFIMAC : FFFFFFFFFFFF
BT_MAC  : FFFFFFFFFFFF
SEC : SLS:2, SKS:0, SKV:4

SLStatus : 2C
Status : Locked! Server unlock required!

Connecting to server...
Connected
Init...
Init: Ok
Authenticating...
Authenticated
Checking Client version...
Client version Ok
Balance: 20,  price:5
Process...
Finished

Unlocking device ... 
Sync data ... 
Device unlocked!

Done!
Elapsed: 00:00:38
  Reply With Quote
The Following User Says Thank You to tayobjoy1 For This Useful Post:
Old 05-28-2022, 05:59   #71098 (permalink)
Freak Poster
 
Join Date: Jul 2008
Location: GSM,Pakistan
Posts: 304
Member: 811049
Status: Offline
Thanks Meter: 99
Tecno bd4 frp done
TECNO BD4
andriod 11 new security frp removed 1 click.
Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : TECNO : BD4_Pop-5-LTE
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
FDL : SEC : RSA auth passed!
FDL : Control transfered!

Boot Done!

Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP

Reconnect Power/Cable!

Done!
Elapsed: 00:00:31
  Reply With Quote
The Following User Says Thank You to Mian Jahangir I For This Useful Post:
Old 05-28-2022, 06:37   #71099 (permalink)
Insane Poster
 
Join Date: Feb 2016
Location: multan pakistan
Age: 42
Posts: 84
Member: 2536582
Status: Offline
Thanks Meter: 34
nokia 105 4g ta 1385 mmmtk cpu read password with cm2
Card found : S/N : BAFB6697 , v0149
Chinese Miracle II [MTK module] v 1.58

Operation : Read UserCode [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 4 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : 4D51CF5BCC2338246706D26DFDC9ECA4
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : EF00 4000 1600 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000
[0] : FLASH_LEN : 0x00400000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000

Read ExtData
Sorting ExtData
Reading UserCode

Active : Yes , Code : 22558

PLock|MobTrack : Not active

Done!
Elapsed: 00:00:08
Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to shahid1982 For This Useful Post:
Old 05-28-2022, 07:40   #71100 (permalink)
No Life Poster
 
azhergoga007's Avatar
 
Join Date: Jan 2011
Location: lullipapi
Posts: 8,670
Member: 1489030
Status: Offline
Sonork: 100.1649409
Thanks Meter: 5,368
Oppo A1K MT6765 FRP/Pattren Reset Done With King Infinity CM2


Code:
Card found : A19EC787 , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34

Load IDBase v312457 Ok!

UserName and/or Password not set! Can't continue!

Load IDBase v312457 Ok!

Operation : Reset Settings/Format FS [ v2.34 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM12)
MODE : BOOTROM
PORT : 12
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM

Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!


Operation : Reset Settings/Format FS [ v2.34 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM12)
MODE : BOOTROM
PORT : 12
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 7F59117F8B5FF9E2340D09889662E9AD
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 83A5B895A0E565B0F07B72779049A6EA78D444447F56F1307247E456E04607EF
BROM : SLA : Local Auth 
BROM : SLA : Starting Auth 
BROM : FF : Look for EMI
BROM : FF : EMI found!
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!

        EMMC: CID : 150100514436334D4203950FCE5626C1
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 514436334D42 : PRV : 0x03
        EMMC: VEN : SAMSUNG : QD63MB
        EMMC: SNN : 2500841046 ( 0x950FCE56 ) , MF : 2/2019

     EMI : DEV : FireFly
     EMI : SRC : preloader_oppo6762_18540.bin
     EMI : CNT : 0009
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: CID : 150100514436334D4203950FCE5626C1
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 514436334D42 : PRV : 0x03
        EMMC: VEN : SAMSUNG : QD63MB
        EMMC: SNN : 2500841046 ( 0x950FCE56 ) , MF : 2/2019

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : EA2F7F4918F80CE441B86466A3FB92AA

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x815757

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA

Done!
Elapsed: 00:00:41

Reconnect Power/Cable!
  Reply With Quote
Reply
Page 4740 of 5074 « First 37404240464046904730473747384739 4740 474147424743475047904840 Last »

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Unlocking 5190 Ryu Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 23 01-07-2018 17:14
news headlines to gsm phone mos Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 7 05-22-2016 11:42
my 8810 is phone locked ,can somebody please help duyphuc Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 18 12-23-2014 09:03
need software for 5161 by cable mln2000 Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 6 08-29-2010 20:17

 



All times are GMT +1. The time now is 06:41.

Contact Us - GSM-Forum - Archive - Top


Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.56327 seconds with 10 queries

SEO by vBSEO