c72 unlocking?

[unlockteam]

What a luky man... I never saw the 2sec pause... I dont know why.. ) I´m doing OK the TP

[nometq]

Originally Posted by unlockteam

When finally I upload the java patch px65v4 (with a original data cable from Siemens tested) It can never run the aplication. says: Wrong Aplication... it happens exactly the same ina S65... but in goes well on SL65 and others...

I´m triying via TP.. please could everybody can tell me the exactly TP cus I can get ESN & HASH... resisitor? same brige? NEVER IT CONECTS! With TP.. without it reads the IMEI etc etc but of course.. no TP.. no esn & Hash...

Please anybody have a steep by steep solution from the beginin?

Thanks!

In this forum mates are very snob with newbie like me. I can give you this link http://forum.gsmhosting.com/vbb/show...=212032&page=2.
File 2Unlocking Siemens C65 v43.rar from free4us Member
is very good but something is doubtful: with or without sim card in phone? With or without Usb original siemens cable?
I hope that for you everything is ok.

[amitks_in]

if alll Of u Just Read this Best advice ! Then u can use any version of papua ! In russian or english no matter ! I also dont know russian language ! but I think they are lucky guys coz they have knowledge about unlocking seimens phones for absolutely FREE This post will guide U in english how to use papua ! and for latest versions of papua U can serach this thread ! I think on page 2-3 web site is mentioned !
http://forum.gsmhosting.com/vbb/show...0&postcount=22

[tatoapf]

Are you sure that the testpoint is the same of siemens C65?

[saso]

Originally Posted by tatoapf

Are you sure that the testpoint is the same of siemens C65?

Test point is the same with C65
for unlocking with x65PapuaUtils use simple Rx-Tx cable
for unlocking with px65v4.jar method , must use original siemens cable

[saso]

Originally Posted by unlockteam

What a luky man... I never saw the 2sec pause... I dont know why.. ) I´m doing OK the TP

Something is wrong
first check cable
after check testpoint
If all is good , repeat 2-3 times, must work

[pchelpsi]

The Saso is right, try a few times and check your test point.

Regards,
Dejan

[kham]

need help to create map for c72
incorrect size log

HWID: 5005
SKEY: 92372125
BKEY: 94434B7FA80AC09872CAC124AF6E0549
[Model: Siemens A50][PhoneID: 02D45195][Desired IMEI: 357363003050482]

[nometq]

Originally Posted by saso

Test point is the same with C65
for unlocking with x65PapuaUtils use simple Rx-Tx cable
for unlocking with px65v4.jar method , must use original siemens cable

Excuse me Saso, unlocking with x65papueaUtils is impossible with original siemens cable or is possible but is sufficient-adeguate only a simple Rx-Tx cable?

[saso]

I don't know but you can try and post result
I always when i work with x65papueaUtils use simple Rx-Tx cable

[nometq]

Originally Posted by saso

I don't know but you can try and post result
I always when i work with x65papueaUtils use simple Rx-Tx cable

For me, original siemens cable is DCA 510 (usb cable, but not DCA 540).
How have you made this "simple" Rx-Tx cable?
Or did you buy this Rx-Tx cable?

[saso]

Oh man

For Rx-Tx you can take max 232 and make you own cable (shematic you will find in this forum)
Or if you don't have COM port in you computer use USB to COM with PL2303
chip inside and pin 1 will be Rx and pin 5 Tx

[nometq]

Originally Posted by saso

Oh man

For Rx-Tx you can take max 232 and make you own cable (shematic you will find in this forum)
Or if you don't have COM port in you computer use USB to COM with PL2303
chip inside and pin 1 will be Rx and pin 5 Tx

Thank you very much. I'm not a gsm businessman. My problem is only with my phone. Before work on it i want be sure that i'll not burn it...

[kham]

help me to fullflash
i have a fuull backunp from a another phone
i create winswup with papua but i can't flash (winswwup stop after 5%)
x65 flasher give me time out after 1/2 minuts

[Chris02]

Try to rehot FlashIC