K608i dead after READ ! - GSM-Forum

karletto66 · 04-13-2006, 09:13

Hi, i have a k608i, CID 49.
Today i tried to READ firmware with 7.1 soft version.
I have cruiser 4-1 cable working ok (i used it a lot of time, also for free k608 using Tp and setool)
I made only read and have this log :

Switch phone ON
Get phone info
Flash CID: 49
Phone KEY: A1_DB2000_49_RED
OTP CID: 49
Phone IMEI: 3568410XXXXXX
Flash ID: 200D
Switch phone ON
Write Flashloader CID49
Waiting to finish
Switch phone ON
Send FLASH application
Read MAIN to file: "test.mbn"
ERROR: 302414

Now phone simply doesn't start at all !!!
Why and how is it possible to fix it without TP ?

Thanks !

karletto66 · 04-13-2006, 09:20

I just tried rebuild SP and have this log.
Phone always DEAD at all !

Switch phone ON
Get phone info
Flash CID: 49
Phone KEY: A1_DB2000_49_RED
OTP CID: 49
Phone IMEI: 35684100XXXXX
Flash ID: 200D
Switch phone ON
Write Flashloader CID49
Waiting to finish
Switch phone ON
Send FLASH application
Write GDFS Flashloader
Switch phone ON
Start GDFS Flashloader
Rebuild SP area and CRCs
Switch phone ON
Write Flashloader CID49
Waiting to finish
Switch phone ON
Reading flash CXC version
Version: R2M001_CXC1250077_EU_5_MI
Send FLASH application
Recover first flash part
ERROR: CXC version not supported for recovery!

DomnulV · 04-13-2006, 09:23

yes...same trouble for me....

SALNAI · 04-13-2006, 09:24

have you tray to connect it with TP ,,or just with cable ?

ok for the CID49 ,,i think that you have solder the TP ,,so your problem is in the tp resistor ,,you must change it ,,or resolder it correctly ,,,and inch***** ,,all will work correctly

good luck and best regards from SaLnAi

karletto66 · 04-13-2006, 09:26

Quote:

Originally Posted by DomnulV

yes...same trouble for me....

I think version of firmware NOT tested...
And the problem is now that the phone is not working also for charge battery !

I have to take another k608 and charge battery in this way....

karletto66 · 04-13-2006, 09:28

Quote:

Originally Posted by SALNAI

have you tray to connect it with TP ,,or just with cable ?

ok for the CID49 ,,i think that you have solder the TP ,,so your problem is in the tp resistor ,,you must change it ,,or resolder it correctly ,,,and inch***** ,,all will work correctly

good luck and best regards from SaLnAi

NO TP soldering or similar !!
Only cable...
So no hardware error for sure...i have not open phone at all !

DomnulV · 04-13-2006, 09:28

yes..I recive 5 phone....2 work with testpoint....yesterday but today I try without testpoint..and one phone is now in PLEASE WAITING....and second is dead after READ function....and the last is without software intervention...

karletto66 · 04-13-2006, 09:32

Quote:

Originally Posted by DomnulV

yes..I recive 5 phone....2 work with testpoint....yesterday but today I try without testpoint..and one phone is now in PLEASE WAITING....and second is dead after READ function....

I made an other k608 with TP and "old free setool2" without problem.
Also flash it with k600 firmware and all ok !
Today try only READ with semc7.1 and kill one...

May be i'll take again "old setool2" and with TP flash it with k600 firmware
But i hope to have a solution without TP and have to open it !

DomnulV · 04-13-2006, 09:36

please try and post the result here!!!

karletto66 · 04-13-2006, 09:44

Quote:

Originally Posted by DomnulV

please try and post the result here!!!

I wait a little to see if it's possible to fix WITHOUT TP...
I don't like too much to open k608i....

oldsindbad · 04-13-2006, 10:19

I need flash files that is for K608
I know it is the same as K600
but my *******r wants his k608 back as he thinks it is better
so
I do have the full flash of repair for the K608
does that file include the file system 2
or what shall I do ??

thanx in advance

DomnulV · 04-13-2006, 10:23

Quote:

Originally Posted by oldsindbad

I need flash files that is for K608
I know it is the same as K600
but my *******r wants his k608 back as he thinks it is better
so
I do have the full flash of repair for the K608
does that file include the file system 2
or what shall I do ??

thanx in advance

Man....your post is incomplet...
Do you have usb-smart? if yes..go to support...all files is in support area...
What is Cid for your phone....?
This post is for dead phone after read with usb-smart...

oldsindbad · 04-13-2006, 10:28

well

1. I am posting here coz I have a usb smart

2. In the support area there is no files for K608=k600+8

3. I know it for the dead bla bla bla

4. My dead phone is alive but after reflash and 2 K600 = k608-8

5. CID 49 ofcourse was the phone (and the flash files needed at any CID even CID 1)

b4 complaining check the support area and see for urself

happy new year

karletto66 · 04-13-2006, 10:41

Also tried to flash recovery firmware...
No good idea...

Always the same...
May be better to use old setool2 and TP for flashing good K600 firmware...

Switch phone ON
Get phone info
Flash CID: 49
Phone KEY: A1_DB2000_49_RED
OTP CID: 49
Phone IMEI: 35684100XXXXX
Flash ID: 200D
Switch phone ON
Write Flashloader CID49
Waiting to finish
Switch phone ON
Send FLASH application
Send MAIN flash file: "K600_CID49_R2F015_FullRepairFlash.mbn"
ERROR: 30223B

DomnulV · 04-13-2006, 10:43

K...
what is the diference beetwin one k600 and k608 ..both with original firmware?
I don't know, because I haven't one k600...

04-13-2006, 09:13	#1 (permalink)
karletto66 Major Poster Join Date: Oct 2005 Posts: 41 Member: 193369 Status: Offline Thanks Meter: 0	K608i dead after READ ! Hi, i have a k608i, CID 49. Today i tried to READ firmware with 7.1 soft version. I have cruiser 4-1 cable working ok (i used it a lot of time, also for free k608 using Tp and setool) I made only read and have this log : Switch phone ON Get phone info Flash CID: 49 Phone KEY: A1_DB2000_49_RED OTP CID: 49 Phone IMEI: 3568410XXXXXX Flash ID: 200D Switch phone ON Write Flashloader CID49 Waiting to finish Switch phone ON Send FLASH application Read MAIN to file: "test.mbn" ERROR: 302414 Now phone simply doesn't start at all !!! Why and how is it possible to fix it without TP ? Thanks !

04-13-2006, 10:19	#11 (permalink)
oldsindbad No Life Poster Join Date: Oct 2002 Location: Earth Age: 54 Posts: 766 Member: 17189 Status: Offline Thanks Meter: 66	guys I need flash files that is for K608 I know it is the same as K600 but my *******r wants his k608 back as he thinks it is better so I do have the full flash of repair for the K608 does that file include the file system 2 or what shall I do ?? thanx in advance

04-13-2006, 10:28	#13 (permalink)
oldsindbad No Life Poster Join Date: Oct 2002 Location: Earth Age: 54 Posts: 766 Member: 17189 Status: Offline Thanks Meter: 66	sorry Mr well 1. I am posting here coz I have a usb smart 2. In the support area there is no files for K608=k600+8 3. I know it for the dead bla bla bla 4. My dead phone is alive but after reflash and 2 K600 = k608-8 5. CID 49 ofcourse was the phone (and the flash files needed at any CID even CID 1) b4 complaining check the support area and see for urself happy new year

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SE K608i dead after unlock	Naseerjako	MT-BOX	7	05-17-2006 15:44
k608i dead after unlock without tp	basim	Sony Ericsson	5	03-24-2006 15:44
K608i Dead After repairing certificate	Naresh	Cruiser Suite	17	02-01-2006 11:56
k608i dead after unlock	SIXTUS	Sony Ericsson	2	11-30-2005 07:47
k608i dead after unlocking & cid changing	adam92se	Sony Ericsson	2	11-27-2005 17:05

04-13-2006, 09:20	#2 (permalink)
karletto66 Major Poster Join Date: Oct 2005 Posts: 41 Member: 193369 Status: Offline Thanks Meter: 0	I just tried rebuild SP and have this log. Phone always DEAD at all ! Switch phone ON Get phone info Flash CID: 49 Phone KEY: A1_DB2000_49_RED OTP CID: 49 Phone IMEI: 35684100XXXXX Flash ID: 200D Switch phone ON Write Flashloader CID49 Waiting to finish Switch phone ON Send FLASH application Write GDFS Flashloader Switch phone ON Start GDFS Flashloader Rebuild SP area and CRCs Switch phone ON Write Flashloader CID49 Waiting to finish Switch phone ON Reading flash CXC version Version: R2M001_CXC1250077_EU_5_MI Send FLASH application Recover first flash part ERROR: CXC version not supported for recovery!

04-13-2006, 09:23	#3 (permalink)
DomnulV No Life Poster Join Date: May 2000 Location: Bacau, Romania Age: 50 Posts: 914 Member: 1447 Status: Offline Thanks Meter: 97	yes...same trouble for me....

04-13-2006, 09:24	#4 (permalink)
SALNAI No Life Poster Join Date: Nov 2003 Location: in my PC of Montreal Posts: 1,112 Member: 43478 Status: Offline Thanks Meter: 33	have you tray to connect it with TP ,,or just with cable ? ok for the CID49 ,,i think that you have solder the TP ,,so your problem is in the tp resistor ,,you must change it ,,or resolder it correctly ,,,and inch***** ,,all will work correctly good luck and best regards from SaLnAi

04-13-2006, 09:28	#7 (permalink)
DomnulV No Life Poster Join Date: May 2000 Location: Bacau, Romania Age: 50 Posts: 914 Member: 1447 Status: Offline Thanks Meter: 97	yes..I recive 5 phone....2 work with testpoint....yesterday but today I try without testpoint..and one phone is now in PLEASE WAITING....and second is dead after READ function....and the last is without software intervention...

04-13-2006, 09:36	#9 (permalink)
DomnulV No Life Poster Join Date: May 2000 Location: Bacau, Romania Age: 50 Posts: 914 Member: 1447 Status: Offline Thanks Meter: 97	please try and post the result here!!!

04-13-2006, 10:41	#14 (permalink)
karletto66 Major Poster Join Date: Oct 2005 Posts: 41 Member: 193369 Status: Offline Thanks Meter: 0	Also tried to flash recovery firmware... No good idea... Always the same... May be better to use old setool2 and TP for flashing good K600 firmware... Switch phone ON Get phone info Flash CID: 49 Phone KEY: A1_DB2000_49_RED OTP CID: 49 Phone IMEI: 35684100XXXXX Flash ID: 200D Switch phone ON Write Flashloader CID49 Waiting to finish Switch phone ON Send FLASH application Send MAIN flash file: "K600_CID49_R2F015_FullRepairFlash.mbn" ERROR: 30223B

04-13-2006, 10:43	#15 (permalink)
DomnulV No Life Poster Join Date: May 2000 Location: Bacau, Romania Age: 50 Posts: 914 Member: 1447 Status: Offline Thanks Meter: 97	K... what is the diference beetwin one k600 and k608 ..both with original firmware? I don't know, because I haven't one k600...