POST ALL QUESTIONS ABOUT BRUTEFORCE SOFTWARE and HARDWARE ONLY HERE - Page 59 - GSM-Forum

qasi786 · 09-11-2011, 09:05

Quote:

Originally Posted by ptt

Yes, you can use AMD processor & Motherboard

Which ones, depends of which / how many VGA Card/s you want to use

If you want to use only 1 card, any motherboard with at least a single 16x PCI-E slot will work.

Lets say that you want to go for a single Radeon HD 6990, you can get it working even on a "cheap" Asrock N68-S3 UCC with an
Athlon II X2 240 / 250 and 2Gb or more of DDR3 memory. The only thing you must choose "Carefully" is the Power supply.

BR

i want to use 3 oh 4 gpu i no the mob i found out mob but which prosessor will be good for that thanks

roberto1980 · 09-11-2011, 12:56

can put 5870 to 5850 in crossfire are compatible for bf ???

ptt · 09-11-2011, 13:31

Quote:

Originally Posted by roberto1980

can put 5870 to 5850 in crossfire are compatible for bf ???

Do you even bother to read, instead of spaming with the same question again and again ? Just a few post above your there is an answer to your question

http://forum.gsmhosting.com/vbb/7700242-post865.html

http://forum.gsmhosting.com/vbb/7700273-post866.html

BR

ptt · 09-11-2011, 13:34

Quote:

Originally Posted by qasi786

i want to use 3 oh 4 gpu i no the mob i found out mob but which prosessor will be good for that thanks

You can go for any Athlon II X2 / Athlon II X3 / Athlon II X4

vid · 09-11-2011, 18:21

Finally done my *******......

GPU: 4x 6990
OS: Win 7 x64
Driver: 11.7
Speed: 16.6g/s

happy for it.....

moulnisky · 09-11-2011, 20:47

Quote:

Originally Posted by vid

Finally done my *******......

GPU: 4x 6990
OS: Win 7 x64
Driver: 11.7
Speed: 16.6g/s

happy for it.....

No Bad

BR

Alex

JAMLU2008 · 09-16-2011, 01:47

oclHashcat-lite32 90E9D35FB2B55818F0214331C0406CDE31B9A776:003569940 496281800 -1 00010905040206030807 -m 1900 ?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1 -n 160 --outfile-format=1 --outfile=356994049628187.cod
pause

I have made this command for work
first 0 to 10%
90 to 100%
50 to 60%
40 to 50%
20 to 30%
60 to 70%
30 to 40%
80 to 90 %
and 70 to 80%

is correct?

thank in advance

bests regards from Spain

moulnisky · 09-16-2011, 08:37

I have made this command for work
first 0 to 20%
90 to 100%
50 to 60%
40 to 50%
20 to 30%
60 to 70%
30 to 40%
80 to 90 %
and 70 to 80%

BR

Alex

benito · 09-16-2011, 19:10

Amazing best record calculation!!

4,6 sec. 1º try

br

LIEREN · 09-16-2011, 20:33

Quote:

Originally Posted by benito

Amazing best record calculation!!

4,6 sec. 1º try

br

Super speed, good~

What configuration of the you computer?

mehdilevip · 09-20-2011, 19:52

hello.
its possible to use 2X 6990 whit (COOLER MASTER 1000 W SPRO GOLD ) ?.

benito · 09-21-2011, 03:55

Quote:

Originally Posted by mehdilevip

hello.
its possible to use 2X 6990 whit (COOLER MASTER 1000 W SPRO GOLD ) ?.

I have 2x HD5970 and a XILENCE 1200W, and for now it was a good option. Since April always in calculation ( 2 or 3 times a day make a pause for 10-15min to refresh the graphics). 1200W is a better choise.

br

moulnisky · 09-21-2011, 07:19

Quote:

Originally Posted by benito

I have 2x HD5970 and a XILENCE 1200W, and for now it was a good option. Since April always in calculation ( 2 or 3 times a day make a pause for 10-15min to refresh the graphics). 1200W is a better choise.

br

6990 as well need more power then a classic 5970
at standard clock and usage they need 375W each.
If you move the switch on "1" position for the OC they need 450W each
at 900 mhz they start to need 475W EACH
95W is a standard CPU plus all the other periferals and the fans wouldn't be enaugh
A 1200W is 100% the definitive choice

BR

Alex

JAMLU2008 · 09-21-2011, 14:47

Hi what it's the recommended psu for x*5850 Without crossfire.

Thanks in advance

Quote:

Originally Posted by moulnisky

6990 as well need more power then a classic 5970
at standard clock and usage they need 375W each.
If you move the switch on "1" position for the OC they need 450W each
at 900 mhz they start to need 475W EACH
95W is a standard CPU plus all the other periferals and the fans wouldn't be enaugh
A 1200W is 100% the definitive choice

BR

Alex

moulnisky · 09-21-2011, 15:44

Quote:

Originally Posted by JAMLU2008

Hi what it's the recommended psu for x*5850 Without crossfire.

Thanks in advance

850w would be the safe choice whatever a good certified 800W should be already enaugh

BR

Alex

View Poll Results: add new gpu ati 6xxx in log to code
yes	442	91.70%
no	43	8.92%
Multiple Choice Poll. Voters: 482. You may not vote on this poll

09-16-2011, 01:47	#877 (permalink)
JAMLU2008 Freak Poster Join Date: Feb 2009 Posts: 119 Member: 963006 Status: Offline Thanks Meter: 6	is correct? oclHashcat-lite32 90E9D35FB2B55818F0214331C0406CDE31B9A776:003569940 496281800 -1 00010905040206030807 -m 1900 ?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1 -n 160 --outfile-format=1 --outfile=356994049628187.cod pause I have made this command for work first 0 to 10% 90 to 100% 50 to 60% 40 to 50% 20 to 30% 60 to 70% 30 to 40% 80 to 90 % and 70 to 80% is correct? thank in advance bests regards from Spain

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
where to find a working program all they have some errors ??	fondas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	12-12-2012 13:26
All 4 locks on 6110	steve	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	04-19-2010 02:44
i can unlock nokia 51xx/61xx sp locks 1,2,3,4 £40 each £30 bulk for u.k only	spterminator	Main Sales Section	0	08-01-1999 05:46
i can unlock all nokia 5110/6110/6150	spterminator	Main Sales Section	0	07-30-1999 03:05
all for GSM: http://fly.to/spear	spear	GSM Mobile Links	0	07-11-1999 22:01

09-11-2011, 12:56	#872 (permalink)
roberto1980 Freak Poster Join Date: Nov 2010 Location: ????? Posts: 116 Member: 1451787 Status: Offline Thanks Meter: 11	can put 5870 to 5850 in crossfire are compatible for bf ???

09-16-2011, 08:37	#878 (permalink)
moulnisky No Life Poster Join Date: Jan 2009 Location: England Age: 59 Posts: 17,681 Member: 947561 Status: Offline Thanks Meter: 14,053	I have made this command for work first 0 to 20% 90 to 100% 50 to 60% 40 to 50% 20 to 30% 60 to 70% 30 to 40% 80 to 90 % and 70 to 80% BR Alex

09-20-2011, 19:52	#881 (permalink)
mehdilevip Freak Poster Join Date: Jun 2008 Posts: 152 Member: 799550 Status: Offline Sonork: leo2407 Thanks Meter: 18	hello. its possible to use 2X 6990 whit (COOLER MASTER 1000 W SPRO GOLD ) ?.