Post here success logs with RIFF JTAG Manager 1.64 and fw 1.41 - Page 139 - GSM-Forum

aman_aks87 · 09-12-2014, 18:59

Samsung S7562

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Resurrector: [Samsung S7562 V1.0.4816.57076]
Restarting target (nRST Low then High)...OK

Connecting to the dead body...OK
Detected dead body ID: 0x106230E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (A00SJJ, 0x0000E9000000 Bytes = 3.64 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (A00SJJ, 0x000000100000 Bytes = 1.00 MB)

Selected Resurrection Data for the eMMC Chip with Capacity = 3.64GB

Flashing the dead body...OK
Resurrection complete!

aman_aks87 · 09-12-2014, 19:00

Samsung S5570

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Samsung S5570 V1.0.4860.51146]

Connecting to the dead body...OK
Detected dead body ID: 0x203C10E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
Flashing the dead body...OK
Resurrection complete!

aman_aks87 · 09-12-2014, 19:01

Samsung I5500

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Resurrector: [Samsung I5500 V1.00]
Restarting target (nRST Low then High)...OK

Connecting to the dead body...OK
Detected dead body ID: 0x203C10E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
Flashing the dead body...OK
Resurrection complete!

aman_aks87 · 09-12-2014, 19:03

HTC Droid DNA

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Resurrector: [HTC Droid DNA (PL8320000) V1.0.4926.47214]
Restarting target (nRST Low then High)...OK

Connecting to the dead body...OK
Detected dead body ID: 0x107190E1 - CORRECT!
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (MAG2GA, 0x0003A3E00000 Bytes = 14.56 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (MAG2GA, 0x000000200000 Bytes = 2.00 MB)

Flashing the dead body...OK
Resurrection complete!

aman_aks87 · 09-12-2014, 19:08

Samsung M250S

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Samsung I9100 V1.0.4850.415]

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 2.81V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (VYL00M, 0x0003AB400000 Bytes = 14.68 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (VYL00M, 0x000000080000 Bytes = 0.50 MB)

Selected Resurrection Data for the eMMC Chip with Capacity = 14.68GB

Flashing the dead body...OK
Resurrection complete!

https://plus.google.com/communities/...35484656385181

[email protected] · 09-13-2014, 09:57

i9070 Dead Boot Repair Done By Riff

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Samsung I9070 V1.0.4762.51152]

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 1.81V, TCK Frequency is 12 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0000 (SEM08G, 0x0001D2000000 Bytes = 7.28 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0045/0x0000 (SEM08G, 0x000000200000 Bytes = 2.00 MB)

Selected Resurrection Data for the eMMC Chip with Capacity = 7.28GB

Flashing the dead body...OK
ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK
Resurrection complete!

aman_aks87 · 09-13-2014, 15:50

HTC One Max

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Package: [HTC One Max (0P3P70000) V1.01 by <legija>]

Connecting to the dead body...OK
Detected dead body ID: 0x207150E1
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0100 (SEM32G, 0x000747C00000 Bytes = 29.12 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0045/0x0100 (SEM32G, 0x000000400000 Bytes = 4.00 MB)

Flashing the dead body...OK
Resurrection complete!

aman_aks87 · 09-13-2014, 15:53

Samsung R530U

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Samsung R530 V1.0.4856.64556]

Connecting to the dead body...OK
Detected dead body ID: 0x706B10E1 - IGNORED!
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]
Settings Code: 0x00010009000000000000000008000000

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (MAG4FB, 0x0003AB400000 Bytes = 14.68 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (MAG4FB, 0x000000200000 Bytes = 2.00 MB)

Writting FLASH1 memory from 0x000004020000 to 0x00000405FFFF
Completed in 00:00:04.306 (Average Transfer Rate: 59.45 kB/s)

Writting FLASH1 memory from 0x000004060000 to 0x0000040DFFFF
Completed in 00:00:09.220 (Average Transfer Rate: 55.53 kB/s)

Writting FLASH1 memory from 0x0000040E0000 to 0x0000042DFFFF
Completed in 00:00:30.701 (Average Transfer Rate: 66.71 kB/s)

Writting FLASH1 memory from 0x0000042E0000 to 0x00000435FFFF
Completed in 00:00:05.008 (Average Transfer Rate: 102.24 kB/s)

Writting FLASH1 memory from 0x000004360000 to 0x000004D5FFFF
Completed in 00:04:06.263 (Average Transfer Rate: 41.58 kB/s)

Writting FLASH1 memory from 0x000004D60000 to 0x000004DDFFFF
Completed in 00:00:06.380 (Average Transfer Rate: 80.25 kB/s)

aman_aks87 · 09-13-2014, 15:55

Samsung T999

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Samsung T999 V1.0.4716.5824]

Connecting to the dead body...OK
Detected dead body ID: 0x707910E1 - CORRECT!
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x00010000000000000000000010000000

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0000 (MAG4FB, 0x0003AB400000 Bytes = 14.68 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0000 (MAG4FB, 0x000000200000 Bytes = 2.00 MB)

Writting FLASH1 memory from 0x000004020000 to 0x00000405FFFF
Completed in 00:00:02.078 (Average Transfer Rate: 123.20 kB/s)

Writting FLASH1 memory from 0x000004060000 to 0x0000040DFFFF
Completed in 00:00:04.219 (Average Transfer Rate: 121.36 kB/s)

Writting FLASH1 memory from 0x0000040E0000 to 0x0000042DFFFF
Completed in 00:00:14.844 (Average Transfer Rate: 137.97 kB/s)

Writting FLASH1 memory from 0x0000042E0000 to 0x00000435FFFF
Completed in 00:00:03.109 (Average Transfer Rate: 164.68 kB/s)

Writting FLASH1 memory from 0x000004360000 to 0x000004D5FFFF
Completed in 00:01:21.109 (Average Transfer Rate: 126.25 kB/s)

Writting FLASH1 memory from 0x000004D60000 to 0x000004DDFFFF
Completed in 00:00:03.422 (Average Transfer Rate: 149.62 kB/s)

https://lh4.googleusercontent.com/-m...-no/14%2B-%2B4

llcoolr · 09-16-2014, 09:51

Code:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Samsung I8160P V1.0.4899.57609]

Connecting to the dead body...OK
WARNING: Connection via USB failed with Code: 0xC000FF01
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 1.81V, TCK Frequency is 12 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0000 (SEM04G, 0x0000EC000000 Bytes = 3.69 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0045/0x0000 (SEM04G, 0x000000100000 Bytes = 1.00 MB)

Selected Resurrection Data for the eMMC Chip with Capacity = 3,69GB

Flashing the dead body...OK
Resurrection complete!

M0YAL · 09-16-2014, 13:23

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Samsung S6312 V1.0.4813.55452]

Connecting to the dead body...OK
Detected dead body ID: 0x106070E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (J5U00M, 0x0000E9000000 Bytes = 3.64 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (J5U00M, 0x000000200000 Bytes = 2.00 MB)

Flashing the dead body...OK
Resurrection complete!

harish1717 · 09-16-2014, 13:26

good aslam bhai//////////////////////////

Akhtar Ali Jatt · 09-28-2014, 14:19

HTC Desire (PB99200) DEAD BOOT REPAIR DoNE

aman_aks87 · 09-28-2014, 18:47

LG P500

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [LG P500 V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x203C00E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x002C/0x55BC (512MB)
Flashing the dead body...OK
Resurrection complete!

rameshwarpooja · 09-29-2014, 12:13

zte mts m131 flash problam plz add this model

09-16-2014, 13:23	#2081 (permalink)
M0YAL No Life Poster Join Date: May 2011 Location: india Posts: 1,679 Member: 1583254 Status: Offline Sonork: 100.1602320 Thanks Meter: 4,792	S6312 bOOT Repaire Done Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.56 Selected Resurrector: [Samsung S6312 V1.0.4813.55452] Connecting to the dead body...OK Detected dead body ID: 0x106070E1 - CORRECT! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (J5U00M, 0x0000E9000000 Bytes = 3.64 GB) Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (J5U00M, 0x000000200000 Bytes = 2.00 MB) Flashing the dead body...OK Resurrection complete!

09-28-2014, 14:19	#2083 (permalink)
Akhtar Ali Jatt No Life Poster Join Date: Jan 2009 Location: Sindh Pakistan Posts: 8,885 Member: 953334 Status: Offline Sonork: 100.1614005 Thanks Meter: 15,425	HTC Desire (PB99200) DEAD BOOT REPAIR DoNE ;) HTC Desire (PB99200) DEAD BOOT REPAIR DoNE

09-12-2014, 18:59	#2071 (permalink)
aman_aks87 Freak Poster Join Date: Sep 2013 Location: INDORE, INDIA Age: 36 Posts: 119 Member: 2023204 Status: Offline Sonork: 100.1653995 Thanks Meter: 23	Samsung S7562 Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.55 Selected Resurrector: [Samsung S7562 V1.0.4816.57076] Restarting target (nRST Low then High)...OK Connecting to the dead body...OK Detected dead body ID: 0x106230E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (A00SJJ, 0x0000E9000000 Bytes = 3.64 GB) Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (A00SJJ, 0x000000100000 Bytes = 1.00 MB) Selected Resurrection Data for the eMMC Chip with Capacity = 3.64GB Flashing the dead body...OK Resurrection complete!

09-12-2014, 19:00	#2072 (permalink)
aman_aks87 Freak Poster Join Date: Sep 2013 Location: INDORE, INDIA Age: 36 Posts: 119 Member: 2023204 Status: Offline Sonork: 100.1653995 Thanks Meter: 23	Samsung S5570 Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.56 Selected Resurrector: [Samsung S5570 V1.0.4860.51146] Connecting to the dead body...OK Detected dead body ID: 0x203C10E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB) Flashing the dead body...OK Resurrection complete!

09-12-2014, 19:01	#2073 (permalink)
aman_aks87 Freak Poster Join Date: Sep 2013 Location: INDORE, INDIA Age: 36 Posts: 119 Member: 2023204 Status: Offline Sonork: 100.1653995 Thanks Meter: 23	Samsung I5500 Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.55 Selected Resurrector: [Samsung I5500 V1.00] Restarting target (nRST Low then High)...OK Connecting to the dead body...OK Detected dead body ID: 0x203C10E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB) Flashing the dead body...OK Resurrection complete!

09-12-2014, 19:03	#2074 (permalink)
aman_aks87 Freak Poster Join Date: Sep 2013 Location: INDORE, INDIA Age: 36 Posts: 119 Member: 2023204 Status: Offline Sonork: 100.1653995 Thanks Meter: 23	HTC Droid DNA Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.55 Selected Resurrector: [HTC Droid DNA (PL8320000) V1.0.4926.47214] Restarting target (nRST Low then High)...OK Connecting to the dead body...OK Detected dead body ID: 0x107190E1 - CORRECT! Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (MAG2GA, 0x0003A3E00000 Bytes = 14.56 GB) Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (MAG2GA, 0x000000200000 Bytes = 2.00 MB) Flashing the dead body...OK Resurrection complete!

09-12-2014, 19:08	#2075 (permalink)
aman_aks87 Freak Poster Join Date: Sep 2013 Location: INDORE, INDIA Age: 36 Posts: 119 Member: 2023204 Status: Offline Sonork: 100.1653995 Thanks Meter: 23	Samsung M250S Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.56 Selected Resurrector: [Samsung I9100 V1.0.4850.415] Connecting to the dead body...OK Detected dead body ID: 0x4BA00477 - CORRECT! Set I/O Voltage reads as 2.81V, TCK Frequency is 8 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (VYL00M, 0x0003AB400000 Bytes = 14.68 GB) Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (VYL00M, 0x000000080000 Bytes = 0.50 MB) Selected Resurrection Data for the eMMC Chip with Capacity = 14.68GB Flashing the dead body...OK Resurrection complete! https://plus.google.com/communities/...35484656385181

09-13-2014, 09:57	#2076 (permalink)
[email protected] Member deceased !! Join Date: Jan 2008 Location: DreamSunlock Canada,TH,CN,BD Age: 36 Posts: 2,846 Member: 670820 Status: Offline Sonork: 100.1583728 Thanks Meter: 1,348	i9070 Dead Boot Repair Done By Riff Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.56 Selected Resurrector: [Samsung I9070 V1.0.4762.51152] Connecting to the dead body...OK Detected dead body ID: 0x4BA00477 - CORRECT! Set I/O Voltage reads as 1.81V, TCK Frequency is 12 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0000 (SEM08G, 0x0001D2000000 Bytes = 7.28 GB) Detected an Initialized FLASH2 Chip, ID: 0x0045/0x0000 (SEM08G, 0x000000200000 Bytes = 2.00 MB) Selected Resurrection Data for the eMMC Chip with Capacity = 7.28GB Flashing the dead body...OK ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK Resurrection complete!

09-13-2014, 15:50	#2077 (permalink)
aman_aks87 Freak Poster Join Date: Sep 2013 Location: INDORE, INDIA Age: 36 Posts: 119 Member: 2023204 Status: Offline Sonork: 100.1653995 Thanks Meter: 23	HTC One Max Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.56 Selected Package: [HTC One Max (0P3P70000) V1.01 by <legija>] Connecting to the dead body...OK Detected dead body ID: 0x207150E1 Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0100 (SEM32G, 0x000747C00000 Bytes = 29.12 GB) Detected an Initialized FLASH2 Chip, ID: 0x0045/0x0100 (SEM32G, 0x000000400000 Bytes = 4.00 MB) Flashing the dead body...OK Resurrection complete!

09-13-2014, 15:53	#2078 (permalink)
aman_aks87 Freak Poster Join Date: Sep 2013 Location: INDORE, INDIA Age: 36 Posts: 119 Member: 2023204 Status: Offline Sonork: 100.1653995 Thanks Meter: 23	Samsung R530U Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.56 Selected Resurrector: [Samsung R530 V1.0.4856.64556] Connecting to the dead body...OK Detected dead body ID: 0x706B10E1 - IGNORED! Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz] Settings Code: 0x00010009000000000000000008000000 Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (MAG4FB, 0x0003AB400000 Bytes = 14.68 GB) Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (MAG4FB, 0x000000200000 Bytes = 2.00 MB) Writting FLASH1 memory from 0x000004020000 to 0x00000405FFFF Completed in 00:00:04.306 (Average Transfer Rate: 59.45 kB/s) Writting FLASH1 memory from 0x000004060000 to 0x0000040DFFFF Completed in 00:00:09.220 (Average Transfer Rate: 55.53 kB/s) Writting FLASH1 memory from 0x0000040E0000 to 0x0000042DFFFF Completed in 00:00:30.701 (Average Transfer Rate: 66.71 kB/s) Writting FLASH1 memory from 0x0000042E0000 to 0x00000435FFFF Completed in 00:00:05.008 (Average Transfer Rate: 102.24 kB/s) Writting FLASH1 memory from 0x000004360000 to 0x000004D5FFFF Completed in 00:04:06.263 (Average Transfer Rate: 41.58 kB/s) Writting FLASH1 memory from 0x000004D60000 to 0x000004DDFFFF Completed in 00:00:06.380 (Average Transfer Rate: 80.25 kB/s)

09-13-2014, 15:55	#2079 (permalink)
aman_aks87 Freak Poster Join Date: Sep 2013 Location: INDORE, INDIA Age: 36 Posts: 119 Member: 2023204 Status: Offline Sonork: 100.1653995 Thanks Meter: 23	Samsung T999 Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.56 Selected Resurrector: [Samsung T999 V1.0.4716.5824] Connecting to the dead body...OK Detected dead body ID: 0x707910E1 - CORRECT! Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Settings Code: 0x00010000000000000000000010000000 Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0000 (MAG4FB, 0x0003AB400000 Bytes = 14.68 GB) Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0000 (MAG4FB, 0x000000200000 Bytes = 2.00 MB) Writting FLASH1 memory from 0x000004020000 to 0x00000405FFFF Completed in 00:00:02.078 (Average Transfer Rate: 123.20 kB/s) Writting FLASH1 memory from 0x000004060000 to 0x0000040DFFFF Completed in 00:00:04.219 (Average Transfer Rate: 121.36 kB/s) Writting FLASH1 memory from 0x0000040E0000 to 0x0000042DFFFF Completed in 00:00:14.844 (Average Transfer Rate: 137.97 kB/s) Writting FLASH1 memory from 0x0000042E0000 to 0x00000435FFFF Completed in 00:00:03.109 (Average Transfer Rate: 164.68 kB/s) Writting FLASH1 memory from 0x000004360000 to 0x000004D5FFFF Completed in 00:01:21.109 (Average Transfer Rate: 126.25 kB/s) Writting FLASH1 memory from 0x000004D60000 to 0x000004DDFFFF Completed in 00:00:03.422 (Average Transfer Rate: 149.62 kB/s) https://lh4.googleusercontent.com/-m...-no/14%2B-%2B4

09-16-2014, 13:26	#2082 (permalink)
harish1717 Freak Poster Join Date: Aug 2006 Location: Congo Posts: 426 Member: 332635 Status: Offline Sonork: 100.1648966 Thanks Meter: 54	good aslam bhai//////////////////////////

09-28-2014, 18:47	#2084 (permalink)
aman_aks87 Freak Poster Join Date: Sep 2013 Location: INDORE, INDIA Age: 36 Posts: 119 Member: 2023204 Status: Offline Sonork: 100.1653995 Thanks Meter: 23	LG P500 Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.56 Selected Resurrector: [LG P500 V1.00] Connecting to the dead body...OK Detected dead body ID: 0x203C00E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x002C/0x55BC (512MB) Flashing the dead body...OK Resurrection complete!

09-29-2014, 12:13	#2085 (permalink)
rameshwarpooja No Life Poster Join Date: May 2010 Location: Alwar Age: 48 Posts: 1,207 Member: 1311498 Status: Offline Sonork: 100.1662995 Thanks Meter: 513	zte mts m131 flash problam plz add this model