Post here success logs with RIFF JTAG Manager 1.64 and fw 1.41 - Page 39 - GSM-Forum

GSM RAJ · 06-04-2011, 13:27

Connecting to the dead body...OK
Detected dead body ID: 0x301700E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Inithardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB)
Unlocking the Phone...OK
Unlock complete!
[FINISH OPERATION_ID = RESURRECT]

ditoblekok · 06-04-2011, 18:01

How about this.. what di i missed ?

Code:

[5/29/2011 6:45:39 PM] [START OPERATION_ID = RESURRECT]
[5/29/2011 6:46:26 PM] Open serial port...OK
[5/29/2011 6:46:26 PM] Connecting to the RIFF Box...OK
[5/29/2011 6:46:26 PM] Firmware Version: 1.23, JTAG Manager Version: 1.32
[5/29/2011 6:46:26 PM] Selected Resurrector: [HTC Mozart]
[5/29/2011 6:46:26 PM] 
[5/29/2011 6:46:26 PM] Connecting to the dead body...OK
[5/29/2011 6:46:26 PM] Detected dead body ID: 0x202400E1 - CORRECT!
[5/29/2011 6:46:26 PM] Set I/O Voltage reads as 3.01V, TCK Frequency is RTCK
[5/29/2011 6:46:26 PM] Adaptive Clocking RTCK Sampling is: [Sample at 20 kHz]
[5/29/2011 6:46:26 PM] 
[5/29/2011 6:46:26 PM] Resurrection sequence started.
[5/29/2011 6:46:26 PM] Establish communication with the phone...OK
[5/29/2011 6:46:26 PM] Initializing internal hardware configuration...OK
[5/29/2011 6:46:26 PM] Uploading resurrector data into memory...OK
[5/29/2011 6:46:26 PM] Starting communication with resurrector...OK
[5/29/2011 6:46:26 PM] 
[5/29/2011 6:46:26 PM] Detected an Initialized FLASH1 Chip ID: 0x00EC/0x66BC (512MB)
[5/29/2011 6:46:26 PM] Selected Unlocking Data for the NAND Chip with Page size = 4KB
[5/29/2011 6:46:26 PM] 
[5/29/2011 6:46:26 PM] Unlocking the Phone...FAILED
[5/29/2011 6:46:26 PM] ERROR: Unlock was not Completed due to Error: 0x3901
[5/29/2011 6:46:26 PM] [FINISH OPERATION_ID = RESURRECT]

Read for backup all done 512MB.. full dump
But always FAILED to unlocked..

mediaextensions · 06-06-2011, 20:25

HD2 LEO done

Code:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.24, JTAG Manager Version: 1.32
Selected Resurrector: [HTC HD2 (Leo)]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00AD/0x55BC (512MB)
Flashing the dead body...OK
Resurrection complete!

GAMMAHIGH · 06-08-2011, 00:05

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.24, JTAG Manager Version: 1.32
Selected Resurrector: [HTC Gene (GENE100)]

Connecting to the dead body...OK
Detected dead body ID: 0x0692602F - CORRECT!
Set I/O Voltage reads as 3.30V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0034 (128MB)
Flashing the dead body...OK
Resurrection complete!

lalitgvarshney · 06-08-2011, 07:25

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.24, JTAG Manager Version: 1.32
Selected Resurrector: [USB Modem EC1260]

Connecting to the dead body...OK
Detected dead body ID: 0x100F80E1 - IGNORED!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 8 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0036 (64MB)

Writting FLASH1 memory from 0x00000000 to 0x03FFFFFF

Completed in 00:09:18.391 (Average Transfer Rate: 121.03 kB/s)

WBR
LALITG

lalitgvarshney · 06-08-2011, 08:50

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.24, JTAG Manager Version: 1.32
Selected Resurrector: [USB Modem EC1260]

Connecting to the dead body...OK
Detected dead body ID: 0x120F80E1 - IGNORED!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00AD/0x0036 (64MB)

Writting FLASH1 address space from 0x00000000 to 0x03FFFFFF
Completed in 00:02:39.765 (Average Transfer Rate: 423.02 kB/s)

WBR
LALITG

rkdbaba · 06-09-2011, 10:13

Quote:

Originally Posted by jagritisharma

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.24, JTAG Manager Version: 1.32
Selected Resurrector: [ZTE S1602]

Connecting to the dead body...OK
Detected dead body ID: 0x122CE0E1 - CORRECT!
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x0020/0x882E (16MB)

Writting FLASH1 memory from 0x00000000 to 0x00FFFFFF
Completed in 00:05:32.281 (Average Transfer Rate: 49.31 kB/s)

can u pl post pinout for zte 1602 and unlock dump please and do i need to open the board pl guide

rahul_rocks3 · 06-09-2011, 10:49

Quote:

Originally Posted by rkdbaba

can u pl post pinout for zte 1602 and unlock dump please and do i need to open the board pl guide

brother if u r gonna connect ur handset with riff then u have to open it.....

rkdbaba · 06-09-2011, 11:02

Quote:

Originally Posted by rahul_rocks3

brother if u r gonna connect ur handset with riff then u have to open it.....

c u gv me ur phone numb i m frm kol i need help

mediaextensions · 06-09-2011, 11:37

Samsung A867

Code:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.24, JTAG Manager Version: 1.32
Selected Resurrector: [Samsung A867]

Connecting to the dead body...OK
Detected dead body ID: 0x101C00E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 6 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x005C (512MB)

Flashing the dead body...
ERROR: DCC Loader has reported Error Code = 0x30 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x30 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x30 (0x000000). Trying to recover...OK
ERROR: Stopped due to multiple communication errors. Terminating at 0x1F800000

Had an error in the end but phone resurrected , and was successfully flashed with multiloader 5.56. Phone is now working very well. Thanks.

amit kanpur · 06-09-2011, 20:05

Quote:

Originally Posted by rkdbaba

c u gv me ur phone numb i m frm kol i need help

add me yahoo ....i solved ur problem

baba_sandeep · 06-10-2011, 08:56

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.24, JTAG Manager Version: 1.32
Selected Resurrector: [ZTE C335]

Connecting to the dead body...OK
Detected dead body ID: 0x200B10E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x22E0 (8MB)
Selected Resurrection Data for the NOR Chip with IDs: 0x00EC/0x22E0

Flashing the dead body...OK
Resurrection complete!

baba_sandeep · 06-10-2011, 08:59

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.24, JTAG Manager Version: 1.32
Selected Resurrector: [Huawei C2906]

Connecting to the dead body...OK
Detected dead body ID: 0x220B10E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x257E (8MB)
Flashing the dead body...OK
Resurrection complet

hans salim · 06-10-2011, 15:56

htc desire done

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.23, JTAG Manager Version: 1.29
Selected Resurrector: [HTC Desire]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 3.01V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB)
Selected Unlocking Data for the NAND Chip with Page size = 2KB

Unlocking the Phone...OK
Unlock code is: 25441050
Unlock complete!

Riteshgpt60 · 06-12-2011, 13:07

Code:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.21, JTAG Manager Version: 1.29
Selected Resurrector: [ZTE S100]

Connecting to the dead body...OK
Detected dead body ID: 0x220B10E1 - IGNORED!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x257E (8MB)

Writting FLASH1 memory from 0x00000000 to 0x007FFFFF
Completed in 00:02:22.016 (Average Transfer Rate: 57.68 kB/s)

06-04-2011, 13:27	#571 (permalink)
GSM RAJ No Life Poster Join Date: May 2001 Location: gujarat india Posts: 1,218 Member: 4600 Status: Offline Thanks Meter: 79	hero100 unlocked Connecting to the dead body...OK Detected dead body ID: 0x301700E1 - CORRECT! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz] Resurrection sequence started. Establish communication with the phone...OK Inithardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB) Unlocking the Phone...OK Unlock complete! [FINISH OPERATION_ID = RESURRECT]

06-08-2011, 07:25	#575 (permalink)
lalitgvarshney Freak Poster Join Date: Jan 2007 Location: DELHI,INDIA Posts: 376 Member: 427627 Status: Offline Thanks Meter: 160	Anydata modem 555c sucsessfull recover by riff Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.24, JTAG Manager Version: 1.32 Selected Resurrector: [USB Modem EC1260] Connecting to the dead body...OK Detected dead body ID: 0x100F80E1 - IGNORED! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 8 MHz] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0036 (64MB) Writting FLASH1 memory from 0x00000000 to 0x03FFFFFF Completed in 00:09:18.391 (Average Transfer Rate: 121.03 kB/s) WBR LALITG

06-08-2011, 08:50	#576 (permalink)
lalitgvarshney Freak Poster Join Date: Jan 2007 Location: DELHI,INDIA Posts: 376 Member: 427627 Status: Offline Thanks Meter: 160	Huawei ec1260 unlock done by riff Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.24, JTAG Manager Version: 1.32 Selected Resurrector: [USB Modem EC1260] Connecting to the dead body...OK Detected dead body ID: 0x120F80E1 - IGNORED! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00AD/0x0036 (64MB) Writting FLASH1 address space from 0x00000000 to 0x03FFFFFF Completed in 00:02:39.765 (Average Transfer Rate: 423.02 kB/s) WBR LALITG

06-10-2011, 08:56	#582 (permalink)
baba_sandeep Freak Poster Join Date: Dec 2008 Location: kanpur Posts: 200 Member: 931438 Status: Offline Sonork: 1614828 Thanks Meter: 26	zte c335 dead set sucessfully repair by riff.box Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.24, JTAG Manager Version: 1.32 Selected Resurrector: [ZTE C335] Connecting to the dead body...OK Detected dead body ID: 0x200B10E1 - CORRECT! Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x22E0 (8MB) Selected Resurrection Data for the NOR Chip with IDs: 0x00EC/0x22E0 Flashing the dead body...OK Resurrection complete!

06-10-2011, 08:59	#583 (permalink)
baba_sandeep Freak Poster Join Date: Dec 2008 Location: kanpur Posts: 200 Member: 931438 Status: Offline Sonork: 1614828 Thanks Meter: 26	Huawei c2906 dead set sucessfully repair by riff.box Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.24, JTAG Manager Version: 1.32 Selected Resurrector: [Huawei C2906] Connecting to the dead body...OK Detected dead body ID: 0x220B10E1 - CORRECT! Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x257E (8MB) Flashing the dead body...OK Resurrection complet

06-08-2011, 00:05	#574 (permalink)
GAMMAHIGH Freak Poster Join Date: Mar 2007 Location: COLOMBIAA Posts: 364 Member: 459220 Status: Offline Sonork: 100.1590597 Thanks Meter: 85	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.24, JTAG Manager Version: 1.32 Selected Resurrector: [HTC Gene (GENE100)] Connecting to the dead body...OK Detected dead body ID: 0x0692602F - CORRECT! Set I/O Voltage reads as 3.30V, TCK Frequency is 8 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0034 (128MB) Flashing the dead body...OK Resurrection complete!

06-10-2011, 15:56	#584 (permalink)
hans salim No Life Poster Join Date: Jun 2006 Location: in this world Posts: 2,535 Member: 292087 Status: Offline Sonork: 1575183 Thanks Meter: 194	htc desire done Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.23, JTAG Manager Version: 1.29 Selected Resurrector: [HTC Desire] Connecting to the dead body...OK Detected dead body ID: 0x202400E1 - CORRECT! Set I/O Voltage reads as 3.01V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB) Selected Unlocking Data for the NAND Chip with Page size = 2KB Unlocking the Phone...OK Unlock code is: 25441050 Unlock complete!