|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Only registered members may post questions, contact other members or search our database of over 8 million posts. Registration is fast, simple and absolutely free so please - Click to REGISTER! If you have any problems with the registration process or your account login, please contact contact us . |
|
Register | FAQ | Donate | Forum Rules | Root any Device | ★iPhone Unlock★ | ★ Direct Codes ★ | Direct Unlock Source | Search | Today's Posts | Mark Forums Read |
| LinkBack | Thread Tools | Display Modes |
05-24-2012, 11:11 | #15766 (permalink) |
No Life Poster Join Date: May 2008 Location: persian Age: 44
Posts: 3,821
Member: 777729 Status: Offline Sonork: 100.1616470 Thanks Meter: 824 | Connect phone on selected interface... Phone found! Series 60 Device detected! read info... - Ok Reading Phone Info.... Connected phone - Nokia E72-1 Software ver : V ICPR82_10w07.5 24-03-10 RM-530 (c) Nokia IMEI : 351513047703209 Ape Ver : 031.023 APE Var : 031.023031.023.01.01031.023.207.04 APE ADSP: 256 DSP Ver : ICPR82_10w07.1_RIO APE Test: 0.029 PPM : CNT : Product SN : CDI361517 Product code : 0592515 Base Prd.code: 0573568 Long Prod.SN : 0 Hardware info======= HWID : 0803 Retu : 40 Tahvo : 00 Batery: 3871 mV APE BT: HCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652. APE HW: 256 Lock info =========== IMEI : 351513047703209 IMEI spNet : 3A 15 15 03 74 07 23 00 IMEI svNet : 33 15 15 03 74 07 23 40 F5 Conf key : 0000000000000000 Provider key : 2440700000000000 Provider : AT&T;U.S.A. (3650) Counters : Key 0 [3] , Fbus 0 [10] Blocks : 7 LOCK STATUS : ============================= BLK : 1 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 2 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 3 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 4 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 5 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 6 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 7 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open ============================= LOCKS : All Open ============================= CRT308 Backup Created SDD key status : Ok SimLock status : Ok Security status : Ok PA_SL3 phone , SP_CODE_LEN : 15 User code : Crypted UserDataExLevel : Low [Gallery] , FullFlash method Done! Core : v1.45 , FlashEngine : v1.40 Selected FlashSettings : Check FlashFiles, Please, wait... Files Set for Flashing : MCU : rm530_081.003_prd.core.fpsx PPM : rm530_081.003_31.01_MEA_C_QW1_prd.rofs2.fpsx PPM2 : rm530_081.003_C00.01_DEFAULT_prd.rofs3.fpsx CNT : rm530_081.003_U012.000_prd.uda.fpsx APE : RM530_ENO_APE_ONLY_09wk35_v0.038.fpsx Flashing phone now... Check files done... -> Check SW version... FlashFile version : 081.003 Phone version : 031.023 -> Check SW version : Upgrade Backup CRT308 data... CRT308 Backup Created SLx Simlock Data read ... ok SL3 Simlock Sign read ... ok WMDRM read ... ok Check communication with phone.... ADL req restart Communication verify done... Preparing... Gathering phone info... Check communication with phone... Reboot.... Connection opened successfully Waiting for communication response... BootRom : 1st boot ok ASIC ID: 000000030000022600010007600C192102011104 CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB EM0 ID: 00001040 EM1 ID: 00001030 PUBLIC ID: 2320021954770344C992E2A59C8CE5A0EC0EA3A4 ASIC MODE ID: 00 ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695 ROM ID: 3E273BF637BE26FA Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.2.0 Processing RAWLOADER... FLIC : 005800EC Req : XSR 1.6 Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.2.0 Processing PASUBTOC ... Processing ALG ... Boot Done! TIME : Boot time : 00:00:02 Reopening the connection... Waiting for response: 30 Waiting for response: 29 ADL: Check mode Select ASIC [C900] PAPUBkeys : 660D81A4455F6F7F9B81D5D10F5336B14B50635E ADL: phone is in flash mode Backup enabled, will read all certificates... Reading NPC certificate... IMEI : 351513047703209 Reading CCC certificate... Reading HWC certificate... Reading R&D certificate... Reading VARIANT certificate... Reading PARTNERC certificate... Reading MDM_KEYS certificate... Cert Read done! NPC Certificate saved... CCC Certificate saved... HWC Certificate saved... SimLock Data saved... SimLock Key saved... WMDRM_PD Data saved... RPL saved : E:\BEST\Backup\Cert\351513047703209.rpl ===Flashing [MCU]=== Erase : Processing rm530_081.003_prd.core.fpsx Partitioning.... Partitioning Ok... Erasing.... Erasing Ok... TIME : Erase time : 00:00:01 Write : Processing rm530_081.003_prd.core.fpsx CMT: Writing Hash CERT [ADA] CMT: Writing Hash CERT [KEYS] CMT: Writing Hash CERT [PRIMAPP] CMT: Writing Hash CERT [RAP3NAND] CMT: Writing Hash CERT [SOS+PMML] CMT: Writing Hash CERT [PASUBTOC] CMT: Writing Hash CERT [PAPUBKEYS] CMT: Writing Hash CERT [GENIO_INIT] CMT: Writing Hash CERT [SOS*UPDAPP] CMT: Writing Hash CERT [SOS*DSP0] CMT: Writing Hash CERT [LDSP] CMT: Writing Hash CERT [SOS*ISASW] CMT: Writing Hash CERT [SOS+CORE] CMT: Writing Hash CERT [SOS+ROFS1] Total writen 454 blocks TIME : Write time : 00:00:42 MCU Write done ADL: Request programm status NAND status : 00000001 / 00000001 / 00000000 ===Flashing [PPM]=== Erase : Processing rm530_081.003_31.01_MEA_C_QW1_prd.rofs2.fpsx Erasing.... Erasing Ok... TIME : Erase time : 00:00:00 Write : Processing rm530_081.003_31.01_MEA_C_QW1_prd.rofs2.fpsx CMT: Writing Hash CERT [SOS+ROFS2] Total writen 250 blocks TIME : Write time : 00:00:24 PPM Write done ADL: Request programm status NAND status : 00000001 / 00000001 / 00000000 ===Flashing [PPM2]=== Erase : Processing rm530_081.003_C00.01_DEFAULT_prd.rofs3.fpsx Erasing.... Erasing Ok... TIME : Erase time : 00:00:00 Write : Processing rm530_081.003_C00.01_DEFAULT_prd.rofs3.fpsx CMT: Writing Hash CERT [SOS+ROFS3] Total writen 35 blocks TIME : Write time : 00:00:03 PPM Write done ADL: Request programm status NAND status : 00000001 / 00000001 / 00000000 ===Flashing [CNT]=== Erase : Processing rm530_081.003_U012.000_prd.uda.fpsx Erasing.... Erasing Ok... TIME : Erase time : 00:00:01 Write : Processing rm530_081.003_U012.000_prd.uda.fpsx Total writen 44 blocks TIME : Write time : 00:00:05 CNT Write done ADL: Request programm status NAND status : 00000001 / 00000001 / 00000000 ===Flashing [APE]=== Erase : Processing RM530_ENO_APE_ONLY_09wk35_v0.038.fpsx Erasing.... Erasing Ok... TIME : Erase time : 00:00:00 Write : Processing RM530_ENO_APE_ONLY_09wk35_v0.038.fpsx CMT: Writing Hash CERT [SOS*ENO] Total writen 12 blocks TIME : Write time : 00:00:01 APE Write done ADL: Request programm status NAND status : 00000001 / 00000001 / 00000000 ADL: Close_Session Content: 000300000000010000000100000000 ADL: Reboot Flashing done! Total flash time : 00:01:21 Reboot phone now... Reading Phone Info.... Connected phone - Nokia E72-1 Software Info: V ICPR82_11w16.3.4 17-08-11 RM-530 (c) Nokia IMEI: 351513047703209 Ape Version: 081.003 Product code: 0592515 Checking... SimLock status : SimLock is Ok Security status : Security is Ok Read Info Done! Set phone to Normal mode... AfterFlash operations done ;D Done! Elapsed: 00:01:53 Connect phone on selected interface... |
The Following User Says Thank You to sirnavid2010 For This Useful Post: |
05-24-2012, 11:22 | #15767 (permalink) |
No Life Poster Join Date: May 2008 Location: persian Age: 44
Posts: 3,821
Member: 777729 Status: Offline Sonork: 100.1616470 Thanks Meter: 824 | registered to: sirnavid Connect phone on selected interface... Core : v1.45 , FlashEngine : v1.40 Selected FlashSettings : Manual Check FlashFiles, Please, wait... Files Set for Flashing : MCU : RM-624_41.2.010_prd.core.C00 PPM : RM-624_41.2.010_prd.rofs2.V41 PPM2 : RM-624_41.2.010_C01_prd.rofs3.fpsx CNT : RM-624_41.2.010_uda_6_001.uda.fpsx APE : RM612_APE_ONLY_ENO_11w17_v0.019.01.fpsx Flashing phone now... Check files done... -> SWversion check skipped : Dead mode selected Dead Mode is Selected Waiting for USB device... --- Press phone's power button or insert cable & charger! --- Connection opened successfully Waiting for communication response... BootRom : 1st boot ok ASIC ID: 000000010000022600010006400C192101051103 CPU ID : RAPIDOv11 , Features : Dead-Test , USBRPL , FullUSB EM0 ID: 00000296 EM1 ID: 00000B22 PUBLIC ID: 1DF00116216902523401A6C441442F12DBE31ACC ASIC MODE ID: 00 ROOT KEY HASH: 479C6DDE3942E12C429C1D6ADED80371 ROM ID: 4B9B75103E691FF8 PatchRAWLoader: Patched OK Processing RAWLOADER... Processing RAP3NAND ... Processing PASUBTOC ... Processing PAPUBKEYS... Processing UPDAPP ... Boot Done! TIME : Boot time : 00:00:04 Reopening the connection... Waiting for response: 30 Waiting for response: 29 Waiting for response: 28 Waiting for response: 27 Waiting for response: 26 Waiting for response: 25 Waiting for response: 24 Waiting for response: 23 Waiting for response: 22 ADL -> [2nd] changing... ADL Server confirm flashmode! ADL : Auth done... ADL : ASIC CMT select Ok ===Flashing [MCU]=== Erase : Processing RM-624_41.2.010_prd.core.C00 Found 4 areas to erase Erasing area 0x00040000 - 0x00082FFF, NAND, CMT Result: 0000 Erasing area 0x00083400 - 0x003FFFFF, NAND, CMT Result: 0000 Erasing area 0x00800000 - 0x00D5FFFF, NAND, CMT Result: 0000 Erasing area 0x00D60000 - 0x0D39FFFF, NAND, CMT Result: 0000 Erase partition 0x0A Partition erase Ok Partitioning : Ok [5] TIME : Erase time : 00:00:01 Write : Processing RM-624_41.2.010_prd.core.C00 Total 489 [489/0/0] blocks to write, writing... CMT : Writing Hash CERT [ADA] CMT : Writing Hash CERT [KEYS] CMT : Writing Hash CERT [PRIMAPP] CMT : Writing Hash CERT [RAP3NAND] CMT : Writing Hash CERT [PASUBTOC] CMT : Writing Hash CERT [PAPUBKEYS] CMT : Writing Hash CERT [SOS*UPDAPP] CMT : Writing Hash CERT [SOS*DSP0] CMT : Writing Hash CERT [SOS*ISASW] CMT : Writing Hash CERT [SOS+CORE] CMT : Writing Hash CERT [SOS+ROFS1] TIME : Write time : 00:00:44 MCU Write done ===Flashing [PPM]=== Erase : Processing RM-624_41.2.010_prd.rofs2.V41 Found 1 areas to erase Erasing area 0x094A0000 - 0x0C49FFFF, NAND, CMT Result: 0000 TIME : Erase time : 00:00:00 Write : Processing RM-624_41.2.010_prd.rofs2.V41 Total 113 [113/0/0] blocks to write, writing... CMT : Writing Hash CERT [SOS+ROFS2] TIME : Write time : 00:00:11 PPM Write done ===Flashing [PPM2]=== Erase : Processing RM-624_41.2.010_C01_prd.rofs3.fpsx Found 1 areas to erase Erasing area 0x0C4A0000 - 0x0D39FFFF, NAND, CMT Result: 0000 TIME : Erase time : 00:00:00 Write : Processing RM-624_41.2.010_C01_prd.rofs3.fpsx Total 5 [5/0/0] blocks to write, writing... CMT : Writing Hash CERT [SOS+ROFS3] TIME : Write time : 00:00:00 PPM Write done ===Flashing [CNT]=== Erase : Processing RM-624_41.2.010_uda_6_001.uda.fpsx Found 1 areas to erase Erasing area 0x0D3C0000 - 0x1EF7FFFF, NAND, CMT Result: 0000 TIME : Erase time : 00:00:00 Write : Processing RM-624_41.2.010_uda_6_001.uda.fpsx Total 214 [214/0/0] blocks to write, writing... TIME : Write time : 00:00:23 CNT Write done ===Flashing [APE]=== Erase : Processing RM612_APE_ONLY_ENO_11w17_v0.019.01.fpsx Found 1 areas to erase Erasing area 0x00400000 - 0x007FFFFF, NAND, CMT Result: 0000 TIME : Erase time : 00:00:00 Write : Processing RM612_APE_ONLY_ENO_11w17_v0.019.01.fpsx Total 15 [15/0/0] blocks to write, writing... CMT : Writing Hash CERT [SOS*ENO] TIME : Write time : 00:00:01 APE Write done ================= ADL : End flashing ADL : Finalize... Flashing done! Total flash time : 00:01:21 Reboot phone now... Reading Phone Info.... Connected phone - Nokia C6-00 Software Info: V ICPR72_11w04.2 09-08-11 RM-612 (c) Nokia IMEI: 351504042260436 Ape Version: v 41.2.010 Product code: 0595151 Checking... SimLock status : SimLock is Ok Security status : Security is Ok Read Info Done! Settings After Flash Defaults... ProductTuneSet...OK! SwUpgradeSet...OK! Set phone to Normal mode... AfterFlash operations done ;D Done! Elapsed: 00:02:00 Connect phone on selected interface... Phone found! Series 60 Device detected! read info... - Ok |
The Following User Says Thank You to sirnavid2010 For This Useful Post: |
05-24-2012, 11:54 | #15768 (permalink) |
No Life Poster Join Date: Apr 2008 Location: PROTECTED BY 308
Posts: 2,818
Member: 750001 Status: Offline Sonork: 100.1641021 Thanks Meter: 1,269 | ZTE s1602 3 hanset unlocked ==== [5/24/2012 4:04:51 PM] ==== COM57 [QCUSB_COM57_1] selected module v1.75 Device: ZTE-S1602 operation: SP-unlock Phone should be Switched ON ! connecting... Jul 06 2011 Jul 06 2011 ZTE 1602 Jul 06 2011 selected.. ESN(hex) : 80BEXXXXX Password accepted.. downloading mode... waiting respon... waiting chip ready... disabling minlock... disabling minlock 50%... done... Finished, time used: 16 sec ==== [5/24/2012 4:07:45 PM] ==== COM57 [QCUSB_COM57_1] selected module v1.75 Device: ZTE-S1602 operation: SP-unlock Phone should be Switched ON ! connecting... Jul 06 2011 Jul 06 2011 ZTE 1602 Jul 06 2011 selected.. ESN(hex) : 8068XXXXX Password accepted.. downloading mode... waiting respon... waiting chip ready... disabling minlock... disabling minlock 50%... done... Finished, time used: 16 sec ==== [5/24/2012 4:09:07 PM] ==== COM57 [QCUSB_COM57_1] selected module v1.75 Device: ZTE-S1602 operation: SP-unlock Phone should be Switched ON ! connecting... Jul 06 2011 Jul 06 2011 ZTE 1602 Jul 06 2011 selected.. ESN(hex) : 80AXXXXX Password accepted.. downloading mode... waiting respon... waiting chip ready... disabling minlock... disabling minlock 50%... done... Finished, time used: 16 sec |
The Following User Says Thank You to akashub For This Useful Post: |
05-24-2012, 11:54 | #15769 (permalink) |
No Life Poster Join Date: Apr 2008 Location: PROTECTED BY 308
Posts: 2,818
Member: 750001 Status: Offline Sonork: 100.1641021 Thanks Meter: 1,269 | ZTE-S165 unlocked COM59 [QCUSB_COM59_1] selected module v1.76 Device: ZTE-S165, C121 operation: SP-unlock Phone should be Switched ON ! connecting... Mar 02 2012 Mar 02 2012 ZTE S165 Mar 02 2012 selected.. ESN(hex) : 802FXXXX Password accepted.. downloading mode... waiting respon... waiting chip ready... unlocking in progress.. unlocking in progress 50%.. unlocking in progress 100%... done... Finished, time used: 16 sec |
The Following User Says Thank You to akashub For This Useful Post: |
05-24-2012, 12:56 | #15770 (permalink) |
No Life Poster Join Date: May 2005 Location: Pakistan,Peshawar
Posts: 1,633
Member: 144708 Status: Offline Sonork: 100.1615125 Thanks Meter: 387 | X2 flashing Done.. Core : v1.45 , FlashEngine : v1.40 Selected FlashSettings : Manual Check FlashFiles, Please, wait... Files Set for Flashing : MCU : rm618__04.90.mcusw PPM : rm618__04.90.ppm_mh CNT : rm618__04.90.image_mh_0595236_004 Flashing phone now... Check files done... -> SWversion check skipped : Dead mode selected Dead Mode is Selected Waiting for USB device... --- Insert cable and charger or press phone's power button! --- Connection opened successfully Waiting for communication response... BootRom : 1st boot ok ASIC ID: 000000000000000022000509200C0000 CPU ID : BroadCom 21351 , Features : Dead-Test, USBRPL, FullUSB EM0 ID: 00005361 PUBLIC ID: 803F62030420F908649C68AA0CB810D18226BB6F ASIC MODE ID: 00 ROOT KEY HASH: 1B0D74C532CA1C6133940C740E8C786E ROM ID: DE56D582BDDE7A3A Use BCM21351_usb2nd.fg , Rev : 2.1 Ver : 12.2.0 Processing RAWLOADER... FLIC : 00300020 Req : XSR 1.6 Use BCM21351_XSR16_usbalg.fg , Rev : 2.1 Ver : 12.2.0 Processing PASUBTOC ... Processing ALG ... Boot Done! TIME : Boot time : 00:00:01 Reopening the connection... Waiting for response: 30 ADL: Check mode Select ASIC [C900] PAPUBkeys : E9700989029D9E899915F781B1582048E042A738 ADL: phone is in flash mode Backup enabled, will read all certificates... Reading NPC certificate... IMEI : 353423040708395 Reading CCC certificate... Reading HWC certificate... Reading R&D certificate... Reading VARIANT certificate... Reading PARTNERC certificate... Reading MDM_KEYS certificate... Cert Read done! NPC Certificate saved... CCC Certificate saved... HWC Certificate saved... RPL saved : c:\InfinityBox\BEST\Backup\Cert\353423040708395_CR T.rpl ===Flashing [MCU]=== Erase : Processing rm618__04.90.mcusw Partitioning.... Partitioning Ok... Erasing.... Erasing Ok... TIME : Erase time : 00:00:00 Write : Processing rm618__04.90.mcusw CMT: Writing Hash CERT [KEYS] CMT: Writing Hash CERT [PAPUBKEYS] CMT: Writing Hash CERT [PRIMAPP] CMT: Writing Hash CERT [PASUBTOC] CMT: Writing Hash CERT [ADA] CMT: Writing Hash CERT [RAP3NAND] CMT: Writing Hash CERT [ISA+DYNSW] CMT: Writing Hash CERT [MCUSW] CMT: Writing Hash CERT [MCUSW1] CMT: Writing Hash CERT [GENIO_INIT] CMT: Writing Hash CERT [UPDAPP] Total writen 506 blocks TIME : Write time : 00:00:07 MCU Write done ADL: Request programm status NAND status : 00000000 / 00000000 / 00000000 ===Flashing [PPM]=== Erase : Processing rm618__04.90.ppm_mh Partitioning.... Partitioning Ok... Erasing.... Erasing Ok... TIME : Erase time : 00:00:00 Write : Processing rm618__04.90.ppm_mh Total writen 117 blocks TIME : Write time : 00:00:01 PPM Write done ADL: Request programm status NAND status : 00000000 / 00000000 / 00000000 ===Flashing [CNT]=== Erase : Processing rm618__04.90.image_mh_0595236_004 Partitioning.... Partitioning Ok... Erasing.... Erasing Ok... TIME : Erase time : 00:00:01 Write : Processing rm618__04.90.image_mh_0595236_004 Total writen 338 blocks TIME : Write time : 00:00:04 CNT Write done ADL: Request programm status NAND status : 00000000 / 00000000 / 00000000 ADL: Close_Session Content: 000300000000000000000000000000 ADL: Reboot Flashing done! Total flash time : 00:00:15 Reboot phone now... Reading Phone Info.... Connected phone - Nokia X2-00 Software Info: V 04.90 28-09-10 RM-618 (c) Nokia IMEI: 353423040708395 PPM version : V 04.90 28-09-10 RM-618 (c) Nokia MH Product code: 0595304 Checking... SimLock status : SimLock is Ok Security status : Security is Ok Read Info Done! Settings After Flash Defaults... ProductTuneSet...OK! SwUpgradeSet...OK! Product code update... Checking User Certificates... Total - 39 certs Data exist, skip certificate repair... Set phone to Normal mode... AfterFlash operations done ;D Done! GSM007 |
The Following User Says Thank You to ***GSM007*** For This Useful Post: |
05-24-2012, 14:33 | #15771 (permalink) |
No Life Poster Join Date: May 2008 Location: persian Age: 44
Posts: 3,821
Member: 777729 Status: Offline Sonork: 100.1616470 Thanks Meter: 824 | COM13 [VCP0] selected Device: Pantech PG-3200 Checking data, wait... Action: reset Boot... Phone must be POWERED-OFF ! Cable must be in "GPRS" mode ! Press and HOLD Power button ! Connecting, wait... Release Power button ! flash: 89881200010001:89881200000000 flash: Intel 128MBit-T Strata T 16Mb id: 00005272 Boot Done Set baud... 115200 Set baud Done Check flash... Reading[_eeprom-fat__Pantech PG-3200]... file saved: E:\InfinityBox\pantech\backup__eeprom-fat__Pantech PG-3200_Pantech PG-3200_20120524-175557.8FE.bin Reading[_eeprom-ffs__Pantech PG-3200]... file saved: E:\InfinityBox\pantech\backup__eeprom-ffs__Pantech PG-3200_Pantech PG-3200_20120524-180004.8FE.bin Check flash Done Check space... Check space Done Check parameters... Check parameters Done Erase... Erase Done Write... Write Done Finished, time used: 724 sec Remove/Install battery now ! |
The Following User Says Thank You to sirnavid2010 For This Useful Post: |
05-24-2012, 15:08 | #15772 (permalink) |
No Life Poster Join Date: Sep 2007 Location: Bulgaria,Assenovgrad Age: 46
Posts: 852
Member: 591325 Status: Offline Thanks Meter: 151 | COM6 [VCP0] selected module v3.26 Action: reset settings ("format ffs") Model: Autodetect 6205-6239 NOR Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! 19200 autodetect Initializing [6226:8A02:8A01]... CPU: MT6226 high speed boot Off chip: 0031:37D2:1F60 status: FF Connecting at 19200, wait... Release Power button now ! Phone detected, wait... Hardware: MT6226,E02 Date: 2005.04.12 Version: 1.0 Version: A828_45_00_081218_DUBAO_ML5 Version: SZMI26_06B_HW detecting structure #2... 0 done 44 byte(s) read imei: 35586201002275 connection Ok building list... done items to clear: 172 warning: wrong packet cs items cleared: 172 of 172 building list... done items remains: 0 Finished, time used: 5 min 57 sec Remove/Install battery now ! |
The Following User Says Thank You to dimityr.milev For This Useful Post: |
05-24-2012, 16:46 | #15773 (permalink) |
Freak Poster Join Date: May 2011 Location: Panamá
Posts: 113
Member: 1570514 Status: Offline Thanks Meter: 59 | COM5 [VCP0] selected module v4.27 Action: "sp-unlock" unlock method: smart fast Model: Coral-620 Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! 19200 autodetect Initializing [6223:8A05:8A00]... CPU: MT6223 high speed boot On chip: 0011:2A9D:000C status: FF Connecting at 19200, wait... Release Power button now ! Phone detected, wait... Hardware: MT6223,E05 Date: 2000.00.00 Version: 1.0 Version: C2082_3.1.US.DIGICEL_HDR_SP2_A Version: C2082_US_SP2_AAC ==================== New firmware found (v.4.27, database date: 08.05.2012): C2082_3.1.US.DIGICEL_HDR_SP2_A This firmware is missing in support area. If this phone is good and working: - download latest software from support area and try again, probably this firmware already supported in latest software - make "Read full flash" operation - send flash backup files to support: [email protected] or upload files to RapidShare ? Secure Data Logistics or 4shared.com - free file sharing and storage - include in your e-mail full text from phone back label (phone name etc.) ==================== 44 byte(s) read imei: 13579024681122 warning: current phone imei is incorrect ! It's need to repair imei for correct phone functionality ! connection Ok 157 byte(s) read reading data... reading data #2... reading data #3... reading data #4... reading data #5... building new data... writing data... 145 byte(s) read reading data... 972 byte(s) read building new data... writing data... verifying... verification Ok done Finished, time used: 30 sec Remove/Install battery now ! |
The Following User Says Thank You to kem89 For This Useful Post: |
05-25-2012, 04:54 | #15774 (permalink) | |
Freak Poster Join Date: Nov 2008 Location: VietNam Team Age: 50
Posts: 465
Member: 890799 Status: Offline Sonork: 100.999999 Thanks Meter: 384 | c1-01 READ HASH OK c1-01 READ HASH OK THANK INFINITY BEST TEAM Quote:
| |
The Following User Says Thank You to huahaonam For This Useful Post: |
05-25-2012, 09:44 | #15775 (permalink) |
No Life Poster Join Date: Jul 2005 Location: Tanzania
Posts: 561
Member: 161280 Status: Offline Sonork: 100.1616990 Thanks Meter: 82 | c1 by infinity best card found: S/N 4xxxxxx registered to: Evarist Connect phone on selected interface... Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Core : v1.45 , FlashEngine : v1.40 Selected FlashSettings : FullFlash Check FlashFiles, Please, wait... Files Set for Flashing : MCU : rm607__06.07.mcusw PPM : rm607__06.07.ppm_oc CNT : rm607__06.07_008.image_c_orange_fr_v3_9g0p0 Flashing phone now... Check files done... -> SWversion check skipped : Manual mode selected Backup CRT308 data... CRT308 Backup Created Check communication with phone.... ADL req restart Communication verify done... Preparing... Check communication with phone... SL3 Simlock read (XGOLD) ... ok Reboot.... Connection opened successfully DBG : F00A1FB300020303010100FF CPUID : XGOLD 213 2nd boot Ok, 01 2nd ready, AA Sending Algo Algo sent Ok BL : Quantum_Bootloader_2.5_M1S1 Speed accepted, use 6.500.000 FLASHID : 89008289 FLIC conf set, RST set Boot done! Backup enabled, will read all certificates Reading CCC Reading HWC Reading NPC IMEI : 356976048956842 PCcode : 0596379 NPC Certificate saved... CCC Certificate saved... HWC Certificate saved... SimLock Data saved... SimLock Key saved... RPL saved : c:\InfinityBox\BEST\Backup\Cert\356976048956842_XG 213.rpl ===Flashing [MCU]=== File : rm607__06.07.mcusw Image : rm607__06.07.mcusw_ebl_psi.fls Cert block found, sending.... Cert sent Found 5 region(s) Processing Region 1/5 Erase , Start : 0x40000000 , Len : 0x00020000 Erasing, wait ... Erase done, time : 00:00:00 Write , Start : 0x40000000 , Len : 0x00020000 Flashing , wait ... Region flash done, time : 00:00:00 Processing Region 2/5 Erase , Start : 0x40040000 , Len : 0x00040000 Erasing, wait ... Erase done, time : 00:00:01 Write , Start : 0x40040000 , Len : 0x00040000 Flashing , wait ... Region flash done, time : 00:00:00 Processing Region 3/5 Erase , Start : 0x40080000 , Len : 0x00020000 Erasing, wait ... Erase done, time : 00:00:00 Write , Start : 0x40080000 , Len : 0x00020000 Flashing , wait ... Region flash done, time : 00:00:00 Processing Region 4/5 Erase , Start : 0x400A0000 , Len : 0x00100000 Erasing, wait ... Erase done, time : 00:00:04 Write , Start : 0x400A0000 , Len : 0x00100000 Flashing , wait ... Region flash done, time : 00:00:01 Processing Region 5/5 Erase , Start : 0x40400000 , Len : 0x01800000 Erasing, wait ... Erase done, time : 00:02:21 Write , Start : 0x40400000 , Len : 0x01780000 Flashing , wait ... Region flash done, time : 00:00:36 ===Flashing [PPM]=== File : rm607__06.07.ppm_oc Image : package_oc.ppm_ebl_psi.fls Cert block found, sending.... Cert sent Found 1 region(s) Processing Region 1/1 Erase , Start : 0x41C00000 , Len : 0x00600000 Erasing, wait ... Erase done, time : 00:00:15 Write , Start : 0x41C00000 , Len : 0x0038412C Flashing , wait ... Region flash done, time : 00:00:04 ===Flashing [CNT]=== File : rm607__06.07_008.image_c_orange_fr_v3_9g0p0 Image : package_c_ora_fr.image.fls Cert block found, sending.... Cert sent Found 2 region(s) Processing Region 1/2 Erase , Start : 0x42200000 , Len : 0x01C60000 Erasing, wait ... Erase done, time : 00:03:36 Write , Start : 0x42200000 , Len : 0x00AA0000 Flashing , wait ... Region flash done, time : 00:00:14 Processing Region 2/2 Erase , Start : 0x43E60000 , Len : 0x000E0000 Erasing, wait ... Erase done, time : 00:00:05 No write data, skip Flashing done! Total flash time : 00:07:24 Reboot phone now... Reading Phone Info.... Connected phone - C1-01 Software Info: V 06.07 13-10-11 RM-607 (c) Nokia IMEI: 356976048956842 PPM version : V 06.07 13-10-11 RM-607 (c) Nokia OC Product code: 0596379 Checking... SimLock status : SimLock is Ok Security status : Security is Ok Read Info Done! Settings After Flash Defaults... ProductTuneSet...OK! SwUpgradeSet...OK! Checking User Certificates... Total - 40 certs Data exist, skip certificate repair... Set phone to Normal mode... AfterFlash operations done ;D Done! Connect phone on selected interface... Elapsed: 00:08:01 Connect phone on selected interface... |
05-25-2012, 11:27 | #15776 (permalink) |
No Life Poster Join Date: Feb 2010 Location: e.cameros shop Age: 45
Posts: 6,004
Member: 1229604 Status: Offline Sonork: 100.1602688 Thanks Meter: 4,815 | e63 whitescreen hang easy solved by best cable usb load same product code firmware then flash result thanks *** humabol:x |
05-25-2012, 12:03 | #15777 (permalink) |
No Life Poster Join Date: May 2005 Location: Pakistan,Peshawar
Posts: 1,633
Member: 144708 Status: Offline Sonork: 100.1615125 Thanks Meter: 387 | C3-0- flashing Done Core : v1.45 , FlashEngine : v1.40 Selected FlashSettings : FullFlash Check FlashFiles, Please, wait... Files Set for Flashing : MCU : rm640__07.16.mcusw PPM : rm640__07.16.ppm_mr1 CNT : rm640__07.16.image_mr1_059D2P6_006 Flashing phone now... Check files done... -> SWversion check skipped : Dead mode selected Dead Mode is Selected Waiting for USB device... --- Insert cable and charger or press phone's power button! --- Connection opened successfully Waiting for communication response... BootRom : 1st boot ok ASIC ID: 000000030000022600010007600C192102031104 CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB EM0 ID: 00001051 EM1 ID: 00001060 PUBLIC ID: 1B10020939D8034407DC8C592FBDCD63EADE3589 ASIC MODE ID: 00 ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B ROM ID: E693EF0DAC22615B Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.2.0 Processing RAWLOADER... FLIC : 00300098 Req : XSR 1.6 Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.2.0 Processing PASUBTOC ... Processing ALG ... Boot Done! TIME : Boot time : 00:00:02 Reopening the connection... Waiting for response: 30 ADL: Check mode Select ASIC [C900] PAPUBkeys : 5AA09885C97BF3B0F6783A6337506F9394F346EF ADL: phone is in flash mode Backup enabled, will read all certificates... Reading NPC certificate... IMEI : 358299043821921 Reading CCC certificate... Reading HWC certificate... Reading R&D certificate... Reading VARIANT certificate... Reading PARTNERC certificate... Reading MDM_KEYS certificate... Cert Read done! NPC Certificate saved... CCC Certificate saved... HWC Certificate saved... RPL saved : c:\InfinityBox\BEST\Backup\Cert\358299043821921_CR T.rpl ===Flashing [MCU]=== Erase : Processing rm640__07.16.mcusw Partitioning.... Partitioning Ok... Erasing.... Erasing Ok... TIME : Erase time : 00:00:01 Write : Processing rm640__07.16.mcusw CMT: Writing Hash CERT [ADA] CMT: Writing Hash CERT [KEYS] CMT: Writing Hash CERT [PRIMAPP] CMT: Writing Hash CERT [PASUBTOC] CMT: Writing Hash CERT [PAPUBKEYS] CMT: Writing Hash CERT [RAP3NAND] CMT: Writing Hash CERT [UPDAPP] CMT: Writing Hash CERT [LDSP] CMT: Writing Hash CERT [DSP0] CMT: Writing Hash CERT [MCUSW] CMT: Writing Hash CERT [MCUSW1] CMT: Writing Hash CERT [GENIO_INIT] CMT: Writing Hash CERT [ISA+DYNSW] Total writen 264 blocks TIME : Write time : 00:00:10 MCU Write done ADL: Request programm status NAND status : 00000000 / 00000000 / 00000000 ===Flashing [PPM]=== Erase : Processing rm640__07.16.ppm_mr1 Partitioning.... Partitioning Ok... Erasing.... Erasing Ok... TIME : Erase time : 00:00:00 Write : Processing rm640__07.16.ppm_mr1 Total writen 63 blocks TIME : Write time : 00:00:02 PPM Write done ADL: Request programm status NAND status : 00000000 / 00000000 / 00000000 ===Flashing [CNT]=== Erase : Processing rm640__07.16.image_mr1_059D2P6_006 Partitioning.... Partitioning Ok... Erasing.... Erasing Ok... TIME : Erase time : 00:00:02 Write : Processing rm640__07.16.image_mr1_059D2P6_006 Total writen 293 blocks TIME : Write time : 00:00:09 CNT Write done ADL: Request programm status NAND status : 00000000 / 00000000 / 00000000 ADL: Close_Session Content: 000300000000000000000000000000 ADL: Reboot Flashing done! Total flash time : 00:00:26 Reboot phone now... Reading Phone Info.... Connected phone - Nokia C3-01 Software Info: V 07.16 13-01-12 RM-640 (c) Nokia IMEI: 358299043821921 PPM version : V 07.16 13-01-12 RM-640 (c) Nokia MR1 Product code: 0599545 Checking... SimLock status : SimLock is Ok Security status : Security is Ok Read Info Done! Settings After Flash Defaults... Error When resetting FullFactory ... Error When setting User Data defaults ... Error When resetting Product Tune ... Error When resetting SW upgrade Default ... Product code update... Set phone to Normal mode... AfterFlash operations done ;D Done! GSM007 |
05-25-2012, 16:21 | #15778 (permalink) |
No Life Poster Join Date: May 2005 Location: Pakistan,Peshawar
Posts: 1,633
Member: 144708 Status: Offline Sonork: 100.1615125 Thanks Meter: 387 | Nokia 5220 flashing Done.. card found: S/N 2437:0118 registered to: GSM007 Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Reading Phone Info.... Connected phone - Nokia 5220 XpressMusic Software ver : V 06.51 23-03-09 RM-411 (c) Nokia IMEI : 353662018927970 DSP Ver : ICPR72_08w48 PPM : V 06.51 23-03-09 RM-411 (c) Nokia MA CNT : Product SN : DQG732246 Product code : 0563611 Base Prd.code: 0554881 Module code : 0203661 Long Prod.SN : 0 Hardware info======= HWID : 1000 Retu : 15 Tahvo : 22 Batery: 3782 mV CMT BT: 2222-143C LCDVer: SHARP Lock info =========== IMEI : 353662018927970 IMEI spNet : 3A 35 66 02 81 29 97 07 IMEI svNet : 33 35 66 02 81 29 97 37 F1 Conf key : 0000000000000000 Provider key : 2440700000000000 Provider : AT&T;U.S.A. (3650) Counters : Key 0 [3] , Fbus 0 [10] Blocks : 7 LOCK STATUS : ============================= BLK : 1 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 2 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 3 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 4 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 5 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 6 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 7 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open ============================= LOCKS : All Open ============================= CRT308 Backup Created SDD key status : Ok SimLock status : Ok Security status : Ok PA_SL2 phone User Code : 369258 MMC pwd : no any record found UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery] Done! Core : v1.45 , FlashEngine : v1.40 Selected FlashSettings : FullFlash Check FlashFiles, Please, wait... Files Set for Flashing : MCU : rm411__07.23.mcusw PPM : rm411__07.23.ppm_mb CNT : rm411__07.23.image_mb_b_grey Flashing phone now... Check files done... -> SWversion check skipped : Manual mode selected Backup CRT308 data... CRT308 Backup Created SLx Simlock Data read ... ok SL2 Simlock read ... ok WMDRM read ... ok SimLock Data saved... SimLock Key saved... WMDRM_PD Data saved... RPL saved : c:\InfinityBox\BEST\Backup\Cert\353662018927970_SI M.rpl Batery valtage : 3782 mV -> Batery voltage is low, please, charge Break by user request Core : v1.45 , FlashEngine : v1.40 Selected FlashSettings : FullFlash Check FlashFiles, Please, wait... Files Set for Flashing : MCU : rm411__07.23.mcusw PPM : rm411__07.23.ppm_mb CNT : rm411__07.23.image_mb_b_grey Flashing phone now... Check files done... -> SWversion check skipped : Manual mode selected Backup CRT308 data... CRT308 Backup Created SLx Simlock Data read ... ok SL2 Simlock read ... ok WMDRM read ... ok SimLock Data saved... SimLock Key saved... WMDRM_PD Data saved... RPL saved : c:\InfinityBox\BEST\Backup\Cert\353662018927970_SI M_2nd.rpl Batery valtage : 3773 mV -> Batery voltage is low, please, charge Break by user request Core : v1.45 , FlashEngine : v1.40 Selected FlashSettings : FullFlash Check FlashFiles, Please, wait... Files Set for Flashing : MCU : rm411__07.23.mcusw PPM : rm411__07.23.ppm_mb CNT : rm411__07.23.image_mb_b_grey Flashing phone now... Check files done... -> SWversion check skipped : Manual mode selected Backup CRT308 data... CRT308 Backup Created SLx Simlock Data read ... ok SL2 Simlock read ... ok WMDRM read ... ok SimLock Data saved... SimLock Key saved... WMDRM_PD Data saved... RPL saved : c:\InfinityBox\BEST\Backup\Cert\353662018927970_SI M_2nd.rpl Getting product info... RAP_BOOT: 0803000302010000 RAP_PUBLIC: 16700205E51E03546A8DDD282FF4CC239426D003 CMT_ROOTKEY: 9DDBFCFE6E73CED7D8C6268C8EB85723 RAP_PAPUBKEY: D93826B23E9B093BE4DD7304FBAA6778996AE60B Checking CNT sector PN<>FL PN CNT sector : 128 kb ConvertImage: Processing rm411__07.23.image_mb_b_grey ConvertImage: Page Size is 128K, no need convert Loader len: 307008, CHK: C0CE ADL -> Sending loader... Update Server code succesfully sent to phone! TIME : Boot time : 00:00:05 Reopening the connection... Waiting for response: 30 Waiting for response: 29 ADL -> [2nd] changing... ADL Server confirm flashmode! ADL : Check data ADL : Data accepted ADL : ASIC CMT select Ok ===Flashing [MCU]=== Erase : Processing rm411__07.23.mcusw Found 6 areas to erase Erasing area 0x00000000 - 0x000006BF, NOR, CMT Result: 0000 Erasing area 0x000006C0 - 0x0001FFFF, NOR, CMT Result: 0000 Erasing area 0x00040000 - 0x000BFFFF, NOR, CMT Result: 0000 Erasing area 0x000C0000 - 0x0013FFFF, NOR, CMT Result: 0000 Erasing area 0x00140000 - 0x0137FFFF, NOR, CMT Result: 0000 Erasing area 0x01380000 - 0x0151FFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:02:12 Write : Processing rm411__07.23.mcusw Total 1289 [1289/0/0] blocks to write, writing... CMT : Writing Hash CERT [NOLO] CMT : Writing Hash CERT [KEYS] CMT : Writing Hash CERT [PRIMAPP] CMT : Writing Hash CERT [PASUBTOC] CMT : Writing Hash CERT [PAPUBKEYS] CMT : Writing Hash CERT [UPDAPP] CMT : Writing Hash CERT [DSP0] CMT : Writing Hash CERT [MCUSW] TIME : Write time : 00:01:06 MCU Write done ===Flashing [PPM]=== Erase : Processing rm411__07.23.ppm_mb Found 1 areas to erase Erasing area 0x01520000 - 0x01DBFFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:00:55 Write : Processing rm411__07.23.ppm_mb Total 400 [400/0/0] blocks to write, writing... TIME : Write time : 00:00:22 PPM Write done ===Flashing [CNT]=== Erase : Processing rm411__07.23.image_mb_b_grey Found 2 areas to erase Erasing area 0x01DC0000 - 0x0215FFFF, NOR, CMT Result: 0000 Erasing area 0x02160000 - 0x03FBFFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:05:29 Write : Processing rm411__07.23.image_mb_b_grey Total 472 [472/0/0] blocks to write, writing... TIME : Write time : 00:00:25 CNT Write done ADL : End flashing Flashing done! Total flash time : 00:10:31 Reboot phone now... Reading Phone Info.... Connected phone - Nokia 5220 XpressMusic Software Info: V 07.23 17-07-09 RM-411 (c) Nokia IMEI: 353662018927970 PPM version : V 07.23 17-07-09 RM-411 (c) Nokia MB Product code: 0563611 Checking... SimLock status : SimLock is Ok Security status : Security is Ok Read Info Done! Settings After Flash Defaults... ProductTuneSet...OK! SwUpgradeSet...OK! GSM007 |
05-26-2012, 07:19 | #15779 (permalink) |
No Life Poster Join Date: May 2008 Location: persian Age: 44
Posts: 3,821
Member: 777729 Status: Offline Sonork: 100.1616470 Thanks Meter: 824 | registered to: sirnavid Connect phone on selected interface... Core : v1.45 , FlashEngine : v1.40 Selected FlashSettings : Manual Check FlashFiles, Please, wait... Files Set for Flashing : MCU : rm761__10.61.mcusw PPM : rm761__10.61.ppm_ma4 CNT : rm761__10.61.image_ma4_059J4L1_005 Flashing phone now... Check files done... -> SWversion check skipped : Dead mode selected Dead Mode is Selected Waiting for USB device... -> If Windows say "Unrecognized device" - just reinsert battery -> If flashing freeze - reinsert cable and try again --- Press phone's power button or insert charger! --- Connection opened successfully DBG : F00A1FB300020303010100FF CPUID : XGOLD 213 2nd boot Ok, 01 2nd ready, AA Sending Algo Algo sent Ok BL : Quantum_Bootloader_10.46_M1S1 Speed accepted, use 6.500.000 FLASHID : 89008289 FLIC conf set, RST set Boot done! Backup enabled, will read all certificates Reading CCC Reading HWC Reading NPC IMEI 1 : 359347047168507 IMEI 2 : 359347047168515 PCcode : 059J4K9 NPC Certificate saved... CCC Certificate saved... HWC Certificate saved... RPL saved : E:\BEST\Backup\Cert\359347047168507_35934704716851 5_XG213_CRT.rpl ===Flashing [MCU]=== File : rm761__10.61.mcusw Image : rm761__10.61.mcusw_ebl_psi.fls Cert block found, sending.... Cert sent Found 5 region(s) Processing Region 1/5 Erase , Start : 0x40000000 , Len : 0x00020000 Erasing, wait ... Erase done, time : 00:00:00 Write , Start : 0x40000000 , Len : 0x00020000 Flashing , wait ... Region flash done, time : 00:00:00 Processing Region 2/5 Erase , Start : 0x40040000 , Len : 0x00020000 Erasing, wait ... Erase done, time : 00:00:00 Write , Start : 0x40040000 , Len : 0x00020000 Flashing , wait ... Region flash done, time : 00:00:00 Processing Region 3/5 Erase , Start : 0x40060000 , Len : 0x00100000 Erasing, wait ... Erase done, time : 00:00:03 Write , Start : 0x40060000 , Len : 0x00100000 Flashing , wait ... Region flash done, time : 00:00:01 Processing Region 4/5 Erase , Start : 0x40280000 , Len : 0x01800000 Erasing, wait ... Erase done, time : 00:01:17 Write , Start : 0x40280000 , Len : 0x01800000 Flashing , wait ... Region flash done, time : 00:00:38 Processing Region 5/5 Erase , Start : 0x43E20000 , Len : 0x00040000 Erasing, wait ... Erase done, time : 00:00:00 No write data, skip ===Flashing [PPM]=== File : rm761__10.61.ppm_ma4 Image : package_ma4.ppm_ebl_psi.fls Cert block found, sending.... Cert sent Found 1 region(s) Processing Region 1/1 Erase , Start : 0x41A80000 , Len : 0x00740000 Erasing, wait ... Erase done, time : 00:00:17 Write , Start : 0x41A80000 , Len : 0x0050E2CC Flashing , wait ... Region flash done, time : 00:00:07 ===Flashing [CNT]=== File : rm761__10.61.image_ma4_059J4L1_005 Image : package_ma4_059J4L1.image.fls Cert block found, sending.... Cert sent Found 2 region(s) Processing Region 1/2 Erase , Start : 0x421C0000 , Len : 0x01C60000 Erasing, wait ... Erase done, time : 00:01:55 Write , Start : 0x421C0000 , Len : 0x009C0000 Flashing , wait ... Region flash done, time : 00:00:15 Processing Region 2/2 Erase , Start : 0x43E60000 , Len : 0x000E0000 Erasing, wait ... Erase done, time : 00:00:02 No write data, skip Flashing done! Total flash time : 00:04:40 Reboot phone now... Reading Phone Info.... Connected phone - Nokia 200 Software Info: V 10.61 02-03-12 RM-761 (c) Nokia IMEI: 359347047168507 PPM version : V 10.61 02-03-12 RM-761 (c) Nokia MA4 Product code: 059J4K9 Checking... SimLock status : SimLock is Ok Security status : Security is Ok Read Info Done! Settings After Flash Defaults... ProductTuneSet...OK! SwUpgradeSet...OK! Checking User Certificates... Total - 42 certs Data exist, skip certificate repair... Set phone to Normal mode... AfterFlash operations done ;D Done! Connect phone on selected interface... Elapsed: 00:06:08 Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok |
The Following User Says Thank You to sirnavid2010 For This Useful Post: |
05-26-2012, 11:37 | #15780 (permalink) |
No Life Poster Join Date: May 2008 Location: persian Age: 44
Posts: 3,821
Member: 777729 Status: Offline Sonork: 100.1616470 Thanks Meter: 824 | registered to: sirnavid Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Reading Phone Info.... Connected phone - Nokia 7500 Software ver : V 05.20 19-12-07 RM-249 (c) Nokia IMEI : 357685019361960 DSP Ver : ICPR62_07w46 PPM : V 05.20 19-12-07 RM-249 (c) Nokia I CNT : Content: i_ny V 05.20 19-12-07 RM-249 (c) Nokia Product SN : MLG041290 Product code : 0544434 Base Prd.code: 0543293 Module code : 0203310 Long Prod.SN : 0 Hardware info======= HWID : 3006 Retu : 15 Tahvo : 22 Batery: 3885 mV CMT BT: 06cc-P9.2 LCDVer: SEIKO Lock info =========== IMEI : 357685019361960 IMEI spNet : 3A 75 86 05 91 63 91 06 IMEI svNet : 33 75 86 05 91 63 91 16 F9 Conf key : 0000000000000000 Provider key : 2440700000000000 Provider : AT&T;U.S.A. (3650) Counters : Key 0 [3] , Fbus 0 [10] Blocks : 7 LOCK STATUS : ============================= BLK : 1 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 2 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 3 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 4 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 5 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 6 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 7 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open ============================= LOCKS : All Open ============================= CRT308 Backup Created SDD key status : Ok SimLock status : Ok Security status : Ok PA_SL2 phone User Code : 777778 MMC pwd : Backup saved UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery] Done! Core : v1.45 , FlashEngine : v1.40 Selected FlashSettings : Check FlashFiles, Please, wait... Files Set for Flashing : PPM : rm249__05.20.ppm_m5 Flashing phone now... Check files done... -> SWversion check skipped : Custom mode selected Backup CRT308 data... CRT308 Backup Created SLx Simlock Data read ... ok SL2 Simlock read ... ok WMDRM read ... ok SimLock Data saved... SimLock Key saved... WMDRM_PD Data saved... RPL saved : E:\BEST\Backup\Cert\357685019361960_SIM.rpl -> MMC pass Record found, saving... Getting product info... RAP_BOOT: 0901010002010000 RAP_PUBLIC: 0B200108854D0052F0105A0BB3F9CA97F4F09D99 CMT_ROOTKEY: BAF3A9C3DBFA8454937DB77F2B8852B1 RAP_PAPUBKEY: 3D744C60D026865F8B384F71E83AA7A06FC12277 Loader len: 288448, CHK: 7940 ADL -> Sending loader... Update Server code succesfully sent to phone! TIME : Boot time : 00:00:03 Reopening the connection... Waiting for response: 30 Waiting for response: 29 Waiting for response: 28 Waiting for response: 27 Waiting for response: 26 ADL Server confirm flashmode! ===Flashing [PPM]=== Erase : Processing rm249__05.20.ppm_m5 Found 1 areas to erase Erasing area 0x01120000 - 0x0177FFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:00:14 Write : Processing rm249__05.20.ppm_m5 Total 279 [279/0/0] blocks to write, writing... TIME : Write time : 00:00:28 PPM Write done ADL : End flashing Flashing done! Total flash time : 00:00:42 Reboot phone now... Reading Phone Info.... Connected phone - Nokia 7500 Software Info: V 05.20 19-12-07 RM-249 (c) Nokia IMEI: 357685019361960 PPM version : V 05.20 19-12-07 RM-249 (c) Nokia 7500 Product code: 0544434 Checking... SimLock status : SimLock is Ok Security status : Security is Ok Read Info Done! Checking User Certificates... Total - 16 certs Data exist, skip certificate repair... AfterFlash operations done ;D Done! Elapsed: 00:01:09 Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok |
The Following User Says Thank You to sirnavid2010 For This Useful Post: |
Bookmarks |
Thread Tools | |
Display Modes | |
| |
Similar Threads | ||||
thread | Thread Starter | Forum | Replies | Last Post |
Unlocking 5190 | Ryu | Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) | 23 | 01-07-2018 17:14 |
news headlines to gsm phone | mos | Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) | 7 | 05-22-2016 11:42 |
my 8810 is phone locked ,can somebody please help | duyphuc | Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) | 18 | 12-23-2014 09:03 |
need software for 5161 by cable | mln2000 | Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) | 6 | 08-29-2010 20:17 |
|