Nvidia GPU chip problem - Page 18 - GSM-Forum

Dan Collins · 04-23-2012, 17:41

rene325,
The actual IPC specs say that baking at 125C for 48 hours is required.

Dan Collins · 04-23-2012, 18:09

I also recommend for everyone to subscribe to this newsletter
Free Newsletter Subscription

milicis · 06-23-2012, 23:04

Hi Guys, I tell you how to get 5-8 Degrees out of GPU.

You just put non conductiove thermal pad in other side og GPU and if, cut the exact size form palmrest plastic shield and put thermal paste between pad and palmrest steel !

I learned from this video. Check it out

HP DV 9000 MOTHER BOARD REPAIR REFLOW CORRECT USE OF COPPER SHIMS - YouTube

Dan Collins · 06-24-2012, 22:16

I'll try that but not all HP's have palmrest metal at the GPU spot. Also the CPU is an overheating factor.

milicis · 06-24-2012, 23:45

Quote:

Originally Posted by Dan Collins

I'll try that but not all HP's have palmrest metal at the GPU spot. Also the CPU is an overheating factor.

Maybe can do the same with CPU, DOES any tested gpu temp before and after placing copper shim?

ClassicAndy · 11-10-2012, 08:55

hi everyone. Is it possible to change from one GPU chip brand to another (i.e. ATI to nVidia) or one model to a higher one (i.e. ATI 7500 to ATI 9500) or MUST be exactly the same with the previous GPU chip on a Laptop? Pls, i will really appreciate your comments.

ShadowmanX · 11-10-2012, 11:18

Hi,
From ATI to NVIDIA not possible and vice-versa. (I have'nt see same layout of ATI and NVIDIA)

For interchange in same brand is possible, but U must be sure that:
Chip's layout fits (not only case, but pinouts too)
if changing from 64bit to 128bit U must add more RAM
if changing from 128bit to 64bit U will lose 1/2 of RAM amount
VGA bios (external or internal) must fit to Your new chip
U must know little more about schematics, straps etc.
be sure that new chip will not heats more than previous..

good luck

Quote:

Originally Posted by ClassicAndy

hi everyone. Is it possible to change from one GPU chip brand to another (i.e. ATI to nVidia) or one model to a higher one (i.e. ATI 7500 to ATI 9500) or MUST be exactly the same with the previous GPU chip on a Laptop? Pls, i will really appreciate your comments.

Dan Collins · 12-30-2012, 00:08

The only time you can change GPU makers is if the GPU is on a separate card like in the Dell M90/9500 where they offer ATI or Nvidia options. But never with an individual chip.

kerim92 · 12-10-2013, 10:39

i always recommaned orginal thermal pad with higher watt and good performance. actually i choose laird's pad's with 5w.

kerim92 · 12-10-2013, 10:42

i found g86-730-a2 +2010 and 216-0752001 +2013 date code new and orginal. i can share who need.

karolev · 12-31-2014, 13:49

"hi. I use t870A , buy the re7500 jovy I received this week. . repair laptops. I would like to share my experience. with the nvidia gpu. the
G6150
Annex photos of my work"

Please if anyone has those photos to upload them again. I got such a machine, but something I can not get the experience with her. Or share experiences of working with her.
Thanks in advance.

12-10-2013, 10:39	#264 (permalink)
kerim92 Freak Poster Join Date: Jun 2006 Posts: 165 Member: 301521 Status: Offline Thanks Meter: 12	hi i always recommaned orginal thermal pad with higher watt and good performance. actually i choose laird's pad's with 5w.

12-10-2013, 10:42	#265 (permalink)
kerim92 Freak Poster Join Date: Jun 2006 Posts: 165 Member: 301521 Status: Offline Thanks Meter: 12	about some product i found g86-730-a2 +2010 and 216-0752001 +2013 date code new and orginal. i can share who need.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
6210 flash chip problem???	maciekmm	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	10-20-2004 18:21
6210 flash chip problem???	maciekmm	Nokia Hardware & Hardware Repair	1	10-19-2004 17:27
Panasonic GD67 source chip problem	corale99	Hardware Repair by brands	0	10-06-2003 07:19
Source chip problem on Panasonic GD67	corale99	Panasonic	0	10-03-2003 22:30
GF768 flash chip problem	looker	Hardware Repair by brands	0	03-08-2002 07:09

04-23-2012, 17:41	#256 (permalink)
Dan Collins Freak Poster Join Date: Jan 2007 Posts: 210 Member: 437621 Status: Offline Thanks Meter: 19	rene325, The actual IPC specs say that baking at 125C for 48 hours is required.

04-23-2012, 18:09	#257 (permalink)
Dan Collins Freak Poster Join Date: Jan 2007 Posts: 210 Member: 437621 Status: Offline Thanks Meter: 19	I also recommend for everyone to subscribe to this newsletter Free Newsletter Subscription

06-23-2012, 23:04	#258 (permalink)
milicis Junior Member Join Date: Oct 2009 Location: RIGA, LATVIA Posts: 21 Member: 1138917 Status: Offline Sonork: milicis Thanks Meter: 3	Hi Guys, I tell you how to get 5-8 Degrees out of GPU. You just put non conductiove thermal pad in other side og GPU and if, cut the exact size form palmrest plastic shield and put thermal paste between pad and palmrest steel ! I learned from this video. Check it out HP DV 9000 MOTHER BOARD REPAIR REFLOW CORRECT USE OF COPPER SHIMS - YouTube

06-24-2012, 22:16	#259 (permalink)
Dan Collins Freak Poster Join Date: Jan 2007 Posts: 210 Member: 437621 Status: Offline Thanks Meter: 19	I'll try that but not all HP's have palmrest metal at the GPU spot. Also the CPU is an overheating factor.

11-10-2012, 08:55	#261 (permalink)
ClassicAndy Junior Member Join Date: Oct 2012 Location: Africa Posts: 16 Member: 1825090 Status: Offline Thanks Meter: 0	hi everyone. Is it possible to change from one GPU chip brand to another (i.e. ATI to nVidia) or one model to a higher one (i.e. ATI 7500 to ATI 9500) or MUST be exactly the same with the previous GPU chip on a Laptop? Pls, i will really appreciate your comments.

12-30-2012, 00:08	#263 (permalink)
Dan Collins Freak Poster Join Date: Jan 2007 Posts: 210 Member: 437621 Status: Offline Thanks Meter: 19	The only time you can change GPU makers is if the GPU is on a separate card like in the Dell M90/9500 where they offer ATI or Nvidia options. But never with an individual chip.

12-31-2014, 13:49	#266 (permalink)
karolev Junior Member Join Date: Sep 2013 Posts: 1 Member: 2019085 Status: Offline Thanks Meter: 0	"hi. I use t870A , buy the re7500 jovy I received this week. . repair laptops. I would like to share my experience. with the nvidia gpu. the G6150 Annex photos of my work" Please if anyone has those photos to upload them again. I got such a machine, but something I can not get the experience with her. Or share experiences of working with her. Thanks in advance.