Post here success logs with RIFF JTAG Manager 1.64 and fw 1.41 - Page 46 - GSM-Forum

uniontelecom · 07-23-2011, 14:15

haier c300 dead sucsessfull flash by riff

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.25, JTAG Manager Version: 1.33
Selected Resurrector: [Haier C300]

Connecting to the dead body...OK
Detected dead body ID: 0x220B10E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x0098/0x0096 (8MB)
Selected Resurrection Data for the NOR Chip with IDs: 0x0098/0x0096

Flashing the dead body...OK
Resurrection complete!

br
vickymalhotra

erocelmaster · 07-25-2011, 02:36

Here is my log, thanks Rocker Team¡¡¡¡¡¡¡¡

M0YAL · 07-25-2011, 15:31

[7/25/2011 7:53:52 PM] [START OPERATION_ID = DCC_WRITE_MEMORY]
[7/25/2011 7:59:29 PM] Open serial port...OK
[7/25/2011 7:59:29 PM] Connecting to the RIFF Box...OK
[7/25/2011 7:59:29 PM] Firmware Version: 1.25, JTAG Manager Version: 1.33
[7/25/2011 7:59:29 PM] Selected Resurrector: [QSC60XX L20 D08]
[7/25/2011 7:59:29 PM]
[7/25/2011 7:59:29 PM] Connecting to the dead body...OK
[7/25/2011 7:59:29 PM] Detected dead body ID: 0x200B10E1 - CORRECT!
[7/25/2011 7:59:29 PM] Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
[7/25/2011 7:59:29 PM] Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]
[7/25/2011 7:59:29 PM]
[7/25/2011 7:59:29 PM] Resurrection sequence started.
[7/25/2011 7:59:29 PM] Establish communication with the phone...OK
[7/25/2011 7:59:29 PM] Initializing internal hardware configuration...OK
[7/25/2011 7:59:29 PM] Uploading resurrector data into memory...OK
[7/25/2011 7:59:29 PM] Starting communication with resurrector...OK
[7/25/2011 7:59:29 PM]
[7/25/2011 7:59:29 PM] Detected an Initialized FLASH1 Chip ID: 0x0020/0x8810 (8MB)
[7/25/2011 7:59:29 PM]
[7/25/2011 7:59:29 PM] Writting FLASH1 memory from 0x00000000 to 0x007FFFFF
[7/25/2011 7:59:29 PM] Completed in 00:05:35.438 (Average Transfer Rate: 24.42 kB/s)
[7/25/2011 7:59:29 PM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY]

Anand Gattani · 07-25-2011, 16:10

Quote:

Originally Posted by lalitg

Here is log
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.16, JTAG Manager Version: 1.21
Selected Resurrector: [Huawei C2806M]

Connecting to the dead body...OK
Detected dead body ID: 0x200B10E1 - IGNORED!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x257E (4MB)

Writting FLASH1 memory from 0x00000000 to 0x003FFFFF
Completed in 00:01:20.343 (Average Transfer Rate: 50.98 kB/s)

post here pinout and dump file also

Anand Gattani · 07-26-2011, 05:26

Quote:

Originally Posted by Anand Gattani

post here pinout and dump file also

For Huawei ets 2222+

MOHIT_THAREJA · 07-26-2011, 13:32

huawei c5330 unlock done

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.25, JTAG Manager Version: 1.33
Selected Resurrector: [QSC60XX L24 D08]

Connecting to the dead body...OK
Detected dead body ID: 0x200B30E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x017E/0x2230 (32MB)

Writting FLASH1 memory from 0x00000000 to 0x01FFFFFF
Completed in 00:29:24.469 (Average Transfer Rate: 18.57 kB/s)

MOHIT_THAREJA · 07-26-2011, 14:23

lg rd 3000 dead recover done

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.25, JTAG Manager Version: 1.33
Selected Resurrector: [QSC60XX L24 D08]

Connecting to the dead body...OK
Detected dead body ID: 0x200B10E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x0089/0x8863 (4MB)

Writting FLASH1 memory from 0x00000000 to 0x003FFFFF
ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK
Completed in 00:03:27.266 (Average Transfer Rate: 19.76 kB/s)

farodriguez · 07-26-2011, 14:27

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.25, JTAG Manager Version: 1.33
Selected Resurrector: [HTC Chief]

Connecting to the dead body...OK
Detected dead body ID: 0xC01E00E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x002C/0x55BA (256MB)
Selected Unlocking Data for the NAND Chip with Page size = 2KB

Unlocking the Phone...OK
Unlock code is: 01667499
Unlock complete!

MOHIT_THAREJA · 07-26-2011, 14:56

huawei c2601 dead recover

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.25, JTAG Manager Version: 1.33
Selected Resurrector: [QSC60XX L24 D08]

Connecting to the dead body...OK
Detected dead body ID: 0x200B10E1 - CORRECT!
Set I/O Voltage reads as 2.62V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x0089/0x8852 (4MB)

Writting FLASH1 memory from 0x00000000 to 0x003FFFFF
ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK
Completed in 00:03:10.500 (Average Transfer Rate: 21.50 kB/s)

MOHIT_THAREJA · 07-27-2011, 18:29

lg rd 3100 dead recover done

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.25, JTAG Manager Version: 1.33
Selected Resurrector: [QSC60XX L18 D08]

Connecting to the dead body...OK
Detected dead body ID: 0x200B10E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 2 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x0089/0x8865 (8MB)

Writting FLASH1 memory from 0x00000000 to 0x007FFFFF
Completed in 00:04:02.437 (Average Transfer Rate: 33.79 kB/s)

abrahem · 07-29-2011, 19:08

thanks mr legija

Thanked 30 Times in 11 Posts Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.34
Selected Resurrector: [SE X10]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x002C/0x55B3 (1024MB)
Selected Resurrection Data for the NAND Chip with Page size = 2KB

Flashing the dead body...OK
Resurrection complete!

jhon357add · 07-30-2011, 05:22

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.34
Selected Resurrector: [SE X10]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x002C/0x55B3 (1024MB)
Selected Resurrection Data for the NAND Chip with Page size = 2KB

Flashing the dead body...OK
Resurrection complete!

MOHIT_THAREJA · 07-30-2011, 07:32

samsung b259 dead recover

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.25, JTAG Manager Version: 1.33
Selected Resurrector: [Samsung B259]

Connecting to the dead body...OK
Detected dead body ID: 0x220B10E1 - CORRECT!
Set I/O Voltage reads as 2.62V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x0020/0x8810 (8MB)
Selected Resurrection Data for the NOR Chip with IDs: 0x0020/0x8810

Flashing the dead body...OK
Resurrection complete!

MOHIT_THAREJA · 07-30-2011, 07:33

huawe c2206 dead recover done

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.25, JTAG Manager Version: 1.33
Selected Resurrector: [QSC60XX L24 D08]

Connecting to the dead body...OK
Detected dead body ID: 0x220B10E1 - CORRECT!
Set I/O Voltage reads as 2.62V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x017E/0x221A (4MB)

Writting FLASH1 memory from 0x00000000 to 0x003FFFFF
Completed in 00:02:54.703 (Average Transfer Rate: 23.45 kB/s)

MOHIT_THAREJA · 07-30-2011, 07:34

huawei c2828 blinking done with riff

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.25, JTAG Manager Version: 1.33
Selected Resurrector: [Huawei C2906]

Connecting to the dead body...OK
Detected dead body ID: 0x200B10E1 - IGNORED!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x257E (8MB)

Writting FLASH1 memory from 0x00000000 to 0x007FFFFF
Completed in 00:03:47.062 (Average Transfer Rate: 36.08 kB/s)

07-25-2011, 02:36	#677 (permalink)
erocelmaster No Life Poster Join Date: Nov 2007 Location: in the web Age: 41 Posts: 694 Member: 630907 Status: Offline Thanks Meter: 127	Repaired L.G.-P500H¡¡¡¡¡ Here is my log, thanks Rocker Team¡¡¡¡¡¡¡¡

07-29-2011, 19:08	#686 (permalink)
abrahem Freak Poster Join Date: Jan 2006 Location: vodafone Posts: 190 Member: 217724 Status: Offline Sonork: 100.1595135 Thanks Meter: 33	x10 thanks mr legija Thanked 30 Times in 11 Posts Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.34 Selected Resurrector: [SE X10] Connecting to the dead body...OK Detected dead body ID: 0x202400E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x002C/0x55B3 (1024MB) Selected Resurrection Data for the NAND Chip with Page size = 2KB Flashing the dead body...OK Resurrection complete!

07-30-2011, 05:22	#687 (permalink)
jhon357add Freak Poster Join Date: Jan 2009 Location: MoviL GsM Age: 38 Posts: 425 Member: 949016 Status: Offline Sonork: 161.7672 Thanks Meter: 25	X10 Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.34 Selected Resurrector: [SE X10] Connecting to the dead body...OK Detected dead body ID: 0x202400E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x002C/0x55B3 (1024MB) Selected Resurrection Data for the NAND Chip with Page size = 2KB Flashing the dead body...OK Resurrection complete!

07-23-2011, 14:15	#676 (permalink)
uniontelecom No Life Poster Join Date: Mar 2011 Location: FIND ME Age: 32 Posts: 751 Member: 1538904 Status: Offline Sonork: 100.1603095 Thanks Meter: 198	haier c300 dead sucsessfull flash by riff Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.25, JTAG Manager Version: 1.33 Selected Resurrector: [Haier C300] Connecting to the dead body...OK Detected dead body ID: 0x220B10E1 - CORRECT! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x0098/0x0096 (8MB) Selected Resurrection Data for the NOR Chip with IDs: 0x0098/0x0096 Flashing the dead body...OK Resurrection complete! br vickymalhotra

07-26-2011, 13:32	#681 (permalink)
MOHIT_THAREJA No Life Poster Join Date: Oct 2009 Location: India [UNKNOWN] Posts: 3,257 Member: 1143809 Status: Offline Sonork: 100.1602432 Thanks Meter: 574	huawei c5330 unlock done Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.25, JTAG Manager Version: 1.33 Selected Resurrector: [QSC60XX L24 D08] Connecting to the dead body...OK Detected dead body ID: 0x200B30E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x017E/0x2230 (32MB) Writting FLASH1 memory from 0x00000000 to 0x01FFFFFF Completed in 00:29:24.469 (Average Transfer Rate: 18.57 kB/s)

07-26-2011, 14:23	#682 (permalink)
MOHIT_THAREJA No Life Poster Join Date: Oct 2009 Location: India [UNKNOWN] Posts: 3,257 Member: 1143809 Status: Offline Sonork: 100.1602432 Thanks Meter: 574	lg rd 3000 dead recover done Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.25, JTAG Manager Version: 1.33 Selected Resurrector: [QSC60XX L24 D08] Connecting to the dead body...OK Detected dead body ID: 0x200B10E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x0089/0x8863 (4MB) Writting FLASH1 memory from 0x00000000 to 0x003FFFFF ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK Completed in 00:03:27.266 (Average Transfer Rate: 19.76 kB/s)

07-26-2011, 14:27	#683 (permalink)
farodriguez No Life Poster Join Date: Nov 2009 Location: Venezuela Age: 37 Posts: 579 Member: 1165060 Status: Offline Sonork: 100.1615792 Thanks Meter: 75	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.25, JTAG Manager Version: 1.33 Selected Resurrector: [HTC Chief] Connecting to the dead body...OK Detected dead body ID: 0xC01E00E1 - CORRECT! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x002C/0x55BA (256MB) Selected Unlocking Data for the NAND Chip with Page size = 2KB Unlocking the Phone...OK Unlock code is: 01667499 Unlock complete!

07-26-2011, 14:56	#684 (permalink)
MOHIT_THAREJA No Life Poster Join Date: Oct 2009 Location: India [UNKNOWN] Posts: 3,257 Member: 1143809 Status: Offline Sonork: 100.1602432 Thanks Meter: 574	huawei c2601 dead recover Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.25, JTAG Manager Version: 1.33 Selected Resurrector: [QSC60XX L24 D08] Connecting to the dead body...OK Detected dead body ID: 0x200B10E1 - CORRECT! Set I/O Voltage reads as 2.62V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x0089/0x8852 (4MB) Writting FLASH1 memory from 0x00000000 to 0x003FFFFF ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK Completed in 00:03:10.500 (Average Transfer Rate: 21.50 kB/s)

07-27-2011, 18:29	#685 (permalink)
MOHIT_THAREJA No Life Poster Join Date: Oct 2009 Location: India [UNKNOWN] Posts: 3,257 Member: 1143809 Status: Offline Sonork: 100.1602432 Thanks Meter: 574	lg rd 3100 dead recover done Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.25, JTAG Manager Version: 1.33 Selected Resurrector: [QSC60XX L18 D08] Connecting to the dead body...OK Detected dead body ID: 0x200B10E1 - CORRECT! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 2 MHz] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x0089/0x8865 (8MB) Writting FLASH1 memory from 0x00000000 to 0x007FFFFF Completed in 00:04:02.437 (Average Transfer Rate: 33.79 kB/s)

07-30-2011, 07:32	#688 (permalink)
MOHIT_THAREJA No Life Poster Join Date: Oct 2009 Location: India [UNKNOWN] Posts: 3,257 Member: 1143809 Status: Offline Sonork: 100.1602432 Thanks Meter: 574	samsung b259 dead recover Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.25, JTAG Manager Version: 1.33 Selected Resurrector: [Samsung B259] Connecting to the dead body...OK Detected dead body ID: 0x220B10E1 - CORRECT! Set I/O Voltage reads as 2.62V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x0020/0x8810 (8MB) Selected Resurrection Data for the NOR Chip with IDs: 0x0020/0x8810 Flashing the dead body...OK Resurrection complete!

07-30-2011, 07:33	#689 (permalink)
MOHIT_THAREJA No Life Poster Join Date: Oct 2009 Location: India [UNKNOWN] Posts: 3,257 Member: 1143809 Status: Offline Sonork: 100.1602432 Thanks Meter: 574	huawe c2206 dead recover done Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.25, JTAG Manager Version: 1.33 Selected Resurrector: [QSC60XX L24 D08] Connecting to the dead body...OK Detected dead body ID: 0x220B10E1 - CORRECT! Set I/O Voltage reads as 2.62V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x017E/0x221A (4MB) Writting FLASH1 memory from 0x00000000 to 0x003FFFFF Completed in 00:02:54.703 (Average Transfer Rate: 23.45 kB/s)

07-30-2011, 07:34	#690 (permalink)
MOHIT_THAREJA No Life Poster Join Date: Oct 2009 Location: India [UNKNOWN] Posts: 3,257 Member: 1143809 Status: Offline Sonork: 100.1602432 Thanks Meter: 574	huawei c2828 blinking done with riff Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.25, JTAG Manager Version: 1.33 Selected Resurrector: [Huawei C2906] Connecting to the dead body...OK Detected dead body ID: 0x200B10E1 - IGNORED! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x257E (8MB) Writting FLASH1 memory from 0x00000000 to 0x007FFFFF Completed in 00:03:47.062 (Average Transfer Rate: 36.08 kB/s)