Post here success logs with RIFF JTAG Manager 1.64 and fw 1.41 - Page 48 - GSM-Forum

MOHIT_THAREJA · 08-02-2011, 10:11

again i recover samsung b619

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.34
Selected Resurrector: [Samsung B619]

Connecting to the dead body...OK
Detected dead body ID: 0x220B10E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x2402 (16MB)
Selected Resurrection Data for the NOR Chip with IDs: 0x00EC/0x2402

Flashing the dead body...OK
Resurrection complete!

delchoni · 08-02-2011, 10:16

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.34
Selected Resurrector: [LG GT540]

Connecting to the dead body...OK
Detected dead body ID: 0x203C00E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x55BC (512MB)
Flashing the dead body...OK
Resurrection complete!

farodriguez · 08-02-2011, 12:17

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.34
Selected Resurrector: [Samsung I5700 PDA]

Connecting to the dead body...OK
Detected dead body ID: 0x07B76F0F - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0058 (512MB)
Flashing the dead body...OK
Resurrection complete!

farodriguez · 08-02-2011, 12:21

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.25, JTAG Manager Version: 1.33
Selected Resurrector: [HTC Chief]

Connecting to the dead body...OK
Detected dead body ID: 0xC01E00E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x002C/0x55BA (256MB)
Selected Unlocking Data for the NAND Chip with Page size = 2KB

Unlocking the Phone...OK
Unlock code is: 52627861
Unlock complete!

BABAK NURI · 08-02-2011, 19:54

AGAIN I9100 SGS2...
Thanks Mr.Legija......

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.34
Selected Resurrector: [Samsung i9100]

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 2.79V, TCK Frequency is 9 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0001 (0x03AB400000 Bytes)

Flashing the dead body...OK
Resurrection complete!

uniontelecom · 08-03-2011, 12:17

SAMSUNG B259 DEAD AFTER resurrect handset will be alive

here is log

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.34
Selected Resurrector: [Samsung B259]

Connecting to the dead body...OK
Detected dead body ID: 0x200B10E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0020/0x8810 (8MB)
Selected Resurrection Data for the NOR Chip with IDs: 0x0020/0x8810

Flashing the dead body...OK
Resurrection complete!

br
vicky

MOHIT_THAREJA · 08-04-2011, 14:02

haier c2040 dead recover

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.34
Selected Resurrector: [QSC60XX L20 D08]

Connecting to the dead body...OK
Detected dead body ID: 0x220B10E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x257E (8MB)

Writting FLASH1 memory from 0x0000000000 to 0x00007FFFFF
Completed in 00:04:17.610 (Average Transfer Rate: 31.80 kB/s)

mayank.gupta · 08-04-2011, 18:17

huwai c 2809 dead recover

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.25, JTAG Manager Version: 1.33
Selected Resurrector: [Huawei C2901M]

Connecting to the dead body...OK
Detected dead body ID: 0x220B10E1 - IGNORED!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x257E (8MB)

Writting FLASH1 memory from 0x00000000 to 0x007FFFFF
Completed in 00:02:28.891 (Average Transfer Rate: 55.02 kB/s)

GSM_MARSHALS · 08-04-2011, 19:05

Selected Resurrector: [HTC Mozart]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.98V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x66BC (512MB)
Selected Unlocking Data for the NAND Chip with Page size = 4KB

Unlocking the Phone...OK
Unlock code is: 76683479
Unlock complete!

hiiiiiiiiiiii haaaaaaaaa

**Dipendra Pathak** · 08-05-2011, 07:29

After Riff Successfully resurected B309, handset ask Password.

Uploaded with ImageShack.us

Anyway I did further process from Infinity BOX.

Thank you Riff TEAM.

BR

MOHIT_THAREJA · 08-05-2011, 09:34

huawei c2809 dead recover done

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [QSC60XX L24 D08]

Connecting to the dead body...OK
Detected dead body ID: 0x220B10E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]
Settings Code: 0x0900010000800000000000000026

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x257E (8MB)

Writting FLASH1 memory from 0x0000000000 to 0x00007FFFFF
Completed in 00:05:19.016 (Average Transfer Rate: 25.68 kB/s)

MOHIT_THAREJA · 08-06-2011, 08:03

lg 3540 dead recover done

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [QSC60XX L24 D08]

Connecting to the dead body...OK
Detected dead body ID: 0x220B10E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]
Settings Code: 0x0900010000300000000000000022

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x2609 (4MB)

Writting FLASH1 memory from 0x0000000000 to 0x00002FFFFF
ERROR: Timeout while waiting for DCC Loader response. Trying to recover...
Settings Code: 0x0900010000300000000000000022OK
Completed in 00:02:19.297 (Average Transfer Rate: 22.05 kB/s)

said4 · 08-06-2011, 09:43

GT S5560i repaired
Thanks

gsm_ritesh · 08-06-2011, 09:47

hi members , i m a new user of this box n i want know that how to repair f285 on damru condition.it is any flash file or not ? plz helpme.........

uniontelecom · 08-06-2011, 10:39

LG 3510 DEAD AFRTER REPAIR WITH RIFF SET IS ALIVE

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [LG RD3510]

Connecting to the dead body...OK
Detected dead body ID: 0x200B10E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0089/0x8863 (4MB)
Flashing the dead body...OK
Resurrection complete!

VICKY

08-02-2011, 19:54	#710 (permalink)
BABAK NURI Product Supporter Join Date: Mar 2005 Location: Tehran.IR Age: 43 Posts: 7,259 Member: 131131 Status: Offline Sonork: 100.1606847 Thanks Meter: 4,475	AGAIN I9100 SGS2... Thanks Mr.Legija...... Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.34 Selected Resurrector: [Samsung i9100] Connecting to the dead body...OK Detected dead body ID: 0x4BA00477 - CORRECT! Set I/O Voltage reads as 2.79V, TCK Frequency is 9 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0001 (0x03AB400000 Bytes) Flashing the dead body...OK Resurrection complete! Last edited by BABAK NURI; 08-02-2011 at 20:04.

08-04-2011, 19:05	#714 (permalink)
GSM_MARSHALS No Life Poster Join Date: Sep 2004 Location: SKYPE: will.catcher Age: 39 Posts: 500 Member: 81832 Status: Offline Thanks Meter: 53	HD7 motzart Selected Resurrector: [HTC Mozart] Connecting to the dead body...OK Detected dead body ID: 0x202400E1 - CORRECT! Set I/O Voltage reads as 2.98V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x66BC (512MB) Selected Unlocking Data for the NAND Chip with Page size = 4KB Unlocking the Phone...OK Unlock code is: 76683479 Unlock complete! hiiiiiiiiiiii haaaaaaaaa

08-05-2011, 07:29	#715 (permalink)
Dipendra Pathak Product Manager Join Date: Apr 2008 Location: Whitehole throught Blackhole! Posts: 9,582 Member: 747989 Status: Offline Sonork: 100.1593052 Thanks Meter: 8,623	B309 Successfully Resurrected but PASSWORD ASK After Riff Successfully resurected B309, handset ask Password. Uploaded with ImageShack.us Anyway I did further process from Infinity BOX. Thank you Riff TEAM. BR

08-02-2011, 10:11	#706 (permalink)
MOHIT_THAREJA No Life Poster Join Date: Oct 2009 Location: India [UNKNOWN] Posts: 3,257 Member: 1143809 Status: Offline Sonork: 100.1602432 Thanks Meter: 574	again i recover samsung b619 Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.34 Selected Resurrector: [Samsung B619] Connecting to the dead body...OK Detected dead body ID: 0x220B10E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x2402 (16MB) Selected Resurrection Data for the NOR Chip with IDs: 0x00EC/0x2402 Flashing the dead body...OK Resurrection complete!

08-02-2011, 10:16	#707 (permalink)
delchoni No Life Poster Join Date: Mar 2006 Location: Bulgaria Asenovgrad Age: 42 Posts: 3,197 Member: 239176 Status: Offline Sonork: 100.1602815 Thanks Meter: 851	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.34 Selected Resurrector: [LG GT540] Connecting to the dead body...OK Detected dead body ID: 0x203C00E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x55BC (512MB) Flashing the dead body...OK Resurrection complete!

08-02-2011, 12:17	#708 (permalink)
farodriguez No Life Poster Join Date: Nov 2009 Location: Venezuela Age: 37 Posts: 579 Member: 1165060 Status: Offline Sonork: 100.1615792 Thanks Meter: 75	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.34 Selected Resurrector: [Samsung I5700 PDA] Connecting to the dead body...OK Detected dead body ID: 0x07B76F0F - CORRECT! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0058 (512MB) Flashing the dead body...OK Resurrection complete!

08-02-2011, 12:21	#709 (permalink)
farodriguez No Life Poster Join Date: Nov 2009 Location: Venezuela Age: 37 Posts: 579 Member: 1165060 Status: Offline Sonork: 100.1615792 Thanks Meter: 75	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.25, JTAG Manager Version: 1.33 Selected Resurrector: [HTC Chief] Connecting to the dead body...OK Detected dead body ID: 0xC01E00E1 - CORRECT! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x002C/0x55BA (256MB) Selected Unlocking Data for the NAND Chip with Page size = 2KB Unlocking the Phone...OK Unlock code is: 52627861 Unlock complete!

08-03-2011, 12:17	#711 (permalink)
uniontelecom No Life Poster Join Date: Mar 2011 Location: FIND ME Age: 32 Posts: 751 Member: 1538904 Status: Offline Sonork: 100.1603095 Thanks Meter: 198	SAMSUNG B259 DEAD AFTER resurrect handset will be alive here is log Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.34 Selected Resurrector: [Samsung B259] Connecting to the dead body...OK Detected dead body ID: 0x200B10E1 - CORRECT! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0020/0x8810 (8MB) Selected Resurrection Data for the NOR Chip with IDs: 0x0020/0x8810 Flashing the dead body...OK Resurrection complete! br vicky

08-04-2011, 14:02	#712 (permalink)
MOHIT_THAREJA No Life Poster Join Date: Oct 2009 Location: India [UNKNOWN] Posts: 3,257 Member: 1143809 Status: Offline Sonork: 100.1602432 Thanks Meter: 574	haier c2040 dead recover Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.34 Selected Resurrector: [QSC60XX L20 D08] Connecting to the dead body...OK Detected dead body ID: 0x220B10E1 - CORRECT! Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x257E (8MB) Writting FLASH1 memory from 0x0000000000 to 0x00007FFFFF Completed in 00:04:17.610 (Average Transfer Rate: 31.80 kB/s)

08-04-2011, 18:17	#713 (permalink)
mayank.gupta No Life Poster Join Date: Feb 2009 Posts: 845 Member: 966792 Status: Offline Sonork: 100.1602610 Thanks Meter: 199	huwai c 2809 dead recover Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.25, JTAG Manager Version: 1.33 Selected Resurrector: [Huawei C2901M] Connecting to the dead body...OK Detected dead body ID: 0x220B10E1 - IGNORED! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x257E (8MB) Writting FLASH1 memory from 0x00000000 to 0x007FFFFF Completed in 00:02:28.891 (Average Transfer Rate: 55.02 kB/s)

08-05-2011, 09:34	#716 (permalink)
MOHIT_THAREJA No Life Poster Join Date: Oct 2009 Location: India [UNKNOWN] Posts: 3,257 Member: 1143809 Status: Offline Sonork: 100.1602432 Thanks Meter: 574	huawei c2809 dead recover done Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.35 Selected Resurrector: [QSC60XX L24 D08] Connecting to the dead body...OK Detected dead body ID: 0x220B10E1 - CORRECT! Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz] Settings Code: 0x0900010000800000000000000026 Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x257E (8MB) Writting FLASH1 memory from 0x0000000000 to 0x00007FFFFF Completed in 00:05:19.016 (Average Transfer Rate: 25.68 kB/s)

08-06-2011, 08:03	#717 (permalink)
MOHIT_THAREJA No Life Poster Join Date: Oct 2009 Location: India [UNKNOWN] Posts: 3,257 Member: 1143809 Status: Offline Sonork: 100.1602432 Thanks Meter: 574	lg 3540 dead recover done Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.35 Selected Resurrector: [QSC60XX L24 D08] Connecting to the dead body...OK Detected dead body ID: 0x220B10E1 - CORRECT! Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz] Settings Code: 0x0900010000300000000000000022 Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x2609 (4MB) Writting FLASH1 memory from 0x0000000000 to 0x00002FFFFF ERROR: Timeout while waiting for DCC Loader response. Trying to recover... Settings Code: 0x0900010000300000000000000022OK Completed in 00:02:19.297 (Average Transfer Rate: 22.05 kB/s)

08-06-2011, 09:47	#719 (permalink)
gsm_ritesh Freak Poster Join Date: Sep 2010 Location: indore Posts: 301 Member: 1396867 Status: Offline Thanks Meter: 48	hi members , i m a new user of this box n i want know that how to repair f285 on damru condition.it is any flash file or not ? plz helpme.........

08-06-2011, 10:39	#720 (permalink)
uniontelecom No Life Poster Join Date: Mar 2011 Location: FIND ME Age: 32 Posts: 751 Member: 1538904 Status: Offline Sonork: 100.1603095 Thanks Meter: 198	LG 3510 DEAD AFRTER REPAIR WITH RIFF SET IS ALIVE Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.35 Selected Resurrector: [LG RD3510] Connecting to the dead body...OK Detected dead body ID: 0x200B10E1 - CORRECT! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0089/0x8863 (4MB) Flashing the dead body...OK Resurrection complete! VICKY