Post here success logs with RIFF JTAG Manager 1.64 and fw 1.41 - Page 50 - GSM-Forum

ashraf_bcs · 08-12-2011, 10:19

bnasirbutt · 08-12-2011, 20:29

s5230 dead boot repair done..........
nice work riff jtag ......

jhon357add · 08-13-2011, 00:55

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [HTC HD2 (Leo)]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x55B3 (1024MB)
Flashing the dead body...OK
Resurrection complete!

**Dipendra Pathak** · 08-13-2011, 04:18

ImageShack® - Online Photo and Video Hosting

Thankx Riff Team.

ByIMEI · 08-14-2011, 18:29

DREA200

Code:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [HTC Dream (G1)]

Connecting to the dead body...OK
Detected dead body ID: 0xA01700E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is 1 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00AD/0x55BA (256MB)
Flashing the dead body...OK
Resurrection complete!

Br.

GSM_MARSHALS · 08-14-2011, 19:09

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [Samsung F480]

Connecting to the dead body...OK
Detected dead body ID: 0x200C00E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x005C (512MB)
Flashing the dead body...
WARNING: Programming Error (0x24) at 0x0000300000 is Ignored.OK
Resurrection complete!

blaw · 08-15-2011, 11:06

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [Samsung S7230E]

Connecting to the dead body...OK
Detected dead body ID: 0x07B3617F - CORRECT!
Set I/O Voltage reads as 2.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0054 (512MB)
Selected Resurrection Data for the NAND Chip with Page size = 4KB

Flashing the dead body...OK
Resurrection complete!

mobile. · 08-15-2011, 20:22

[15/08/2011 19:38:04] ------------------------------- JTAG Manager Session Opened -------------------------------
[15/08/2011 19:38:04] JTAG Manger Version: 1.35
[15/08/2011 19:38:04] -------------------------------------------------------------------------------------------

[15/08/2011 19:38:19] [START OPERATION_ID = RESURRECT]
[15/08/2011 19:39:46] Open serial port...OK
[15/08/2011 19:39:46] Connecting to the RIFF Box...OK
[15/08/2011 19:39:46] Firmware Version: 1.26, JTAG Manager Version: 1.35
[15/08/2011 19:39:46] Selected Resurrector: [HTC Desire]
[15/08/2011 19:39:46]
[15/08/2011 19:39:46] Connecting to the dead body...OK
[15/08/2011 19:39:46] Detected dead body ID: 0x202400E1 - CORRECT!
[15/08/2011 19:39:46] Set I/O Voltage reads as 3.01V, TCK Frequency is RTCK
[15/08/2011 19:39:46] Adaptive Clocking RTCK Sampling is: [Sample at MAX]
[15/08/2011 19:39:46]
[15/08/2011 19:39:46] Resurrection sequence started.
[15/08/2011 19:39:46] Establish communication with the phone...OK
[15/08/2011 19:39:46] Initializing internal hardware configuration...OK
[15/08/2011 19:39:46] Uploading resurrector data into memory...OK
[15/08/2011 19:39:46] Starting communication with resurrector...OK
[15/08/2011 19:39:46]
[15/08/2011 19:39:46] Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x55BC (512MB)
[15/08/2011 19:39:46] Selected Resurrection Data for the NAND Chip with Page size = 2KB
[15/08/2011 19:39:46]
[15/08/2011 19:39:46] Flashing the dead body...OK
[15/08/2011 19:39:46] Resurrection complete!
[15/08/2011 19:39:46] [FINISH OPERATION_ID = RESURRECT]

[15/08/2011 19:39:52] ------------------------------- JTAG Manager Session Closed -------------------------------

Burnt Cobba · 08-18-2011, 14:21

Do not have log but its similar to the normal Wildfire.Did not need to flash afterwards.

Thanks Legija and friends!

MOHIT_THAREJA · 08-19-2011, 11:48

LG RD3000 RECOVER DONE

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [QSC60XX L20 D08]

Connecting to the dead body...OK
Detected dead body ID: 0x200B10E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]
Settings Code: 0x0900010000400000000000000026

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0089/0x8863 (4MB)

Writting FLASH1 memory from 0x0000000000 to 0x00003FFFFF
Completed in 00:03:11.000 (Average Transfer Rate: 21.45 kB/s)

najegsm · 08-20-2011, 13:18

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [Samsung i9100]

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 2.80V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0001 (0x03AB400000 Bytes)

Flashing the dead body...OK
Resurrection complete!

GAMMAHIGH · 08-23-2011, 02:36

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [Samsung I897]

Connecting to the dead body...OK
Detected dead body ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.81V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
Flashing the dead body...OK
Resurrection complete!

MOHIT_THAREJA · 08-23-2011, 12:09

huawei c2607 recover done

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [QSC60XX L20 D08]

Connecting to the dead body...OK
Detected dead body ID: 0x220B10E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]
Settings Code: 0x0900010000400000000000000026

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x017E/0x221A (4MB)

Writting FLASH1 memory from 0x0000000000 to 0x00003FFFFF
Completed in 00:03:43.375 (Average Transfer Rate: 18.34 kB/s)

MOHIT_THAREJA · 08-23-2011, 16:47

samsung b239 dead recover

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [Samsung B259]

Connecting to the dead body...OK
Detected dead body ID: 0x220B10E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x0000010000400000000000000026

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0020/0x8810 (8MB)

Writting FLASH1 memory from 0x0000000000 to 0x00007FFFFF
Completed in 00:03:13.547 (Average Transfer Rate: 42.33 kB/s)

nsync2005 · 08-25-2011, 18:24

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [HTC HD7]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 3.01V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x66BC (512MB)
Selected Unlocking Data for the NAND Chip with Page size = 4KB

Unlocking the Phone...OK
Unlock complete!

08-12-2011, 10:19	#736 (permalink)
ashraf_bcs No Life Poster Join Date: Jun 2006 Location: Bangladesh Posts: 2,545 Member: 303373 Status: Offline Sonork: 100.1584377 Thanks Meter: 1,241	Samsung i9000 done...

08-12-2011, 20:29	#737 (permalink)
bnasirbutt Freak Poster Join Date: May 2004 Location: Kabul - Afghanistan Age: 51 Posts: 156 Member: 65945 Status: Offline Sonork: 100.1606747 Thanks Meter: 15	s5230 s5230 dead boot repair done.......... nice work riff jtag ......

08-13-2011, 00:55	#738 (permalink)
jhon357add Freak Poster Join Date: Jan 2009 Location: MoviL GsM Age: 38 Posts: 425 Member: 949016 Status: Offline Sonork: 161.7672 Thanks Meter: 25	HD2 Done Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.35 Selected Resurrector: [HTC HD2 (Leo)] Connecting to the dead body...OK Detected dead body ID: 0x202400E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x55B3 (1024MB) Flashing the dead body...OK Resurrection complete!

08-13-2011, 04:18	#739 (permalink)
Dipendra Pathak Product Manager Join Date: Apr 2008 Location: Whitehole throught Blackhole! Posts: 9,582 Member: 747989 Status: Offline Sonork: 100.1593052 Thanks Meter: 8,623	Samsung B309 Successfully Resurrected ImageShack® - Online Photo and Video Hosting Thankx Riff Team.

08-14-2011, 19:09	#741 (permalink)
GSM_MARSHALS No Life Poster Join Date: Sep 2004 Location: SKYPE: will.catcher Age: 39 Posts: 500 Member: 81832 Status: Offline Thanks Meter: 53	EVEN WITH ERROR , It's repaired , HAHA Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.35 Selected Resurrector: [Samsung F480] Connecting to the dead body...OK Detected dead body ID: 0x200C00E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x005C (512MB) Flashing the dead body... WARNING: Programming Error (0x24) at 0x0000300000 is Ignored.OK Resurrection complete!

08-15-2011, 20:22	#743 (permalink)
mobile. Freak Poster Join Date: Nov 2010 Location: UK Posts: 449 Member: 1454100 Status: Offline Thanks Meter: 28	Fort It Was About Time i uploaded a log File :P [15/08/2011 19:38:04] ------------------------------- JTAG Manager Session Opened ------------------------------- [15/08/2011 19:38:04] JTAG Manger Version: 1.35 [15/08/2011 19:38:04] ------------------------------------------------------------------------------------------- [15/08/2011 19:38:19] [START OPERATION_ID = RESURRECT] [15/08/2011 19:39:46] Open serial port...OK [15/08/2011 19:39:46] Connecting to the RIFF Box...OK [15/08/2011 19:39:46] Firmware Version: 1.26, JTAG Manager Version: 1.35 [15/08/2011 19:39:46] Selected Resurrector: [HTC Desire] [15/08/2011 19:39:46] [15/08/2011 19:39:46] Connecting to the dead body...OK [15/08/2011 19:39:46] Detected dead body ID: 0x202400E1 - CORRECT! [15/08/2011 19:39:46] Set I/O Voltage reads as 3.01V, TCK Frequency is RTCK [15/08/2011 19:39:46] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [15/08/2011 19:39:46] [15/08/2011 19:39:46] Resurrection sequence started. [15/08/2011 19:39:46] Establish communication with the phone...OK [15/08/2011 19:39:46] Initializing internal hardware configuration...OK [15/08/2011 19:39:46] Uploading resurrector data into memory...OK [15/08/2011 19:39:46] Starting communication with resurrector...OK [15/08/2011 19:39:46] [15/08/2011 19:39:46] Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x55BC (512MB) [15/08/2011 19:39:46] Selected Resurrection Data for the NAND Chip with Page size = 2KB [15/08/2011 19:39:46] [15/08/2011 19:39:46] Flashing the dead body...OK [15/08/2011 19:39:46] Resurrection complete! [15/08/2011 19:39:46] [FINISH OPERATION_ID = RESURRECT] [15/08/2011 19:39:52] ------------------------------- JTAG Manager Session Closed -------------------------------

08-18-2011, 14:21	#744 (permalink)
Burnt Cobba No Life Poster Join Date: Apr 2002 Location: The Green Mile Posts: 3,653 Member: 11325 Status: Offline Thanks Meter: 266	Wildfire-S IMEI repair successful 100% Do not have log but its similar to the normal Wildfire.Did not need to flash afterwards. Thanks Legija and friends!

08-19-2011, 11:48	#745 (permalink)
MOHIT_THAREJA No Life Poster Join Date: Oct 2009 Location: India [UNKNOWN] Posts: 3,257 Member: 1143809 Status: Offline Sonork: 100.1602432 Thanks Meter: 574	LG RD3000 RECOVER DONE Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.35 Selected Resurrector: [QSC60XX L20 D08] Connecting to the dead body...OK Detected dead body ID: 0x200B10E1 - CORRECT! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz] Settings Code: 0x0900010000400000000000000026 Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0089/0x8863 (4MB) Writting FLASH1 memory from 0x0000000000 to 0x00003FFFFF Completed in 00:03:11.000 (Average Transfer Rate: 21.45 kB/s)

08-20-2011, 13:18	#746 (permalink)
najegsm Freak Poster Join Date: Sep 2005 Location: saudiarabia/india Posts: 447 Member: 185396 Status: Offline Sonork: 100.1618832 Thanks Meter: 33	samsung i9100 Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.35 Selected Resurrector: [Samsung i9100] Connecting to the dead body...OK Detected dead body ID: 0x4BA00477 - CORRECT! Set I/O Voltage reads as 2.80V, TCK Frequency is 8 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0001 (0x03AB400000 Bytes) Flashing the dead body...OK Resurrection complete!

08-23-2011, 02:36	#747 (permalink)
GAMMAHIGH Freak Poster Join Date: Mar 2007 Location: COLOMBIAA Posts: 364 Member: 459220 Status: Offline Sonork: 100.1590597 Thanks Meter: 85	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.35 Selected Resurrector: [Samsung I897] Connecting to the dead body...OK Detected dead body ID: 0x1BA00477 - CORRECT! Set I/O Voltage reads as 2.81V, TCK Frequency is 8 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB) Flashing the dead body...OK Resurrection complete!

08-23-2011, 12:09	#748 (permalink)
MOHIT_THAREJA No Life Poster Join Date: Oct 2009 Location: India [UNKNOWN] Posts: 3,257 Member: 1143809 Status: Offline Sonork: 100.1602432 Thanks Meter: 574	huawei c2607 recover done Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.35 Selected Resurrector: [QSC60XX L20 D08] Connecting to the dead body...OK Detected dead body ID: 0x220B10E1 - CORRECT! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz] Settings Code: 0x0900010000400000000000000026 Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x017E/0x221A (4MB) Writting FLASH1 memory from 0x0000000000 to 0x00003FFFFF Completed in 00:03:43.375 (Average Transfer Rate: 18.34 kB/s)

08-23-2011, 16:47	#749 (permalink)
MOHIT_THAREJA No Life Poster Join Date: Oct 2009 Location: India [UNKNOWN] Posts: 3,257 Member: 1143809 Status: Offline Sonork: 100.1602432 Thanks Meter: 574	samsung b239 dead recover Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.35 Selected Resurrector: [Samsung B259] Connecting to the dead body...OK Detected dead body ID: 0x220B10E1 - CORRECT! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Settings Code: 0x0000010000400000000000000026 Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0020/0x8810 (8MB) Writting FLASH1 memory from 0x0000000000 to 0x00007FFFFF Completed in 00:03:13.547 (Average Transfer Rate: 42.33 kB/s)

08-25-2011, 18:24	#750 (permalink)
nsync2005 Insane Poster Join Date: Mar 2005 Age: 38 Posts: 88 Member: 127202 Status: Offline Thanks Meter: 4	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.35 Selected Resurrector: [HTC HD7] Connecting to the dead body...OK Detected dead body ID: 0x202400E1 - CORRECT! Set I/O Voltage reads as 3.01V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x66BC (512MB) Selected Unlocking Data for the NAND Chip with Page size = 4KB Unlocking the Phone...OK Unlock complete!