Revision SIM-EMU 6.01 (AVAILABLE) - Page 7 - GSM-Forum

Surej · 12-29-2004, 05:58

I programmed Greencard 2 with out any problems....only thing is it takes some time to switch between lines like it take around 2 min to change lines from one provider to other in an X100..but if you reset from menu and enter pin then it's fast...

WBR

Surej

NBG · 01-26-2005, 19:48

ON Nec 616 and Nec 313 phone kills green 2 card with 6.01 simemu.It asks for pin,after that goes to search network and phones kills pic content,Only way is to reprogram card again in programmator.Can you do something abouth this?
Thanks

JAVA Good · 01-27-2005, 00:51

some one can tell me what is best software for read KI pls ?
and the time for read it it's between X hours and X hours pls ?

and sorry for my BAD english

.

regards,
JAVA Good.

simemu · 01-27-2005, 19:24

@NBG
I'll try to investigate the problem when I have one of these models.

@JAVA
Use Woron Scan

Regards

Shebani · 01-27-2005, 20:50

Quote:

Originally Posted by simemu

It is possible to download exclusively from the following pages:

http://simemu.cjb.net
http://simemu.gsmhosting.net

News

Solved problem with the description of the positions
Having actives the 10 positions and introducing more than 12 characters in each one, the option "Sel.Phone #" hanged the SIM-EMU due to a memory overflow.

------------------------------------------------------------------------------------------

IMPORTANT

For this revision, it is only necessary to reprogram the flash and to introduce the IMSI/Ki data again using phone menu, SMS's or from PC using the Grabar_SMS.xvb script with a previous data saved.

Regards

Thanks for your SIMEMU.

it's very nice

satzone · 03-16-2005, 15:30

Dear SimEmu
I have your last SIM_EMU_6.01_CFG_v2.1.msi, but with some problems. Because in Nokia and Samsung X100 when i am selecting phone number from Sel.phone# then it is switching very well but in other sets is not switching to other number then i am going on other number after switch off/on, enter pin for other number and then number does work.
You are requested to please give me your nice opinion on this problem that how i can solve this problem i.e. how i can switched an other number through Sel.phone# instead of switch off/on.
An early attention is requested.

SATZONE

Shocking · 04-05-2005, 18:21

Quote:

Originally Posted by Angelex

@SimEmu
I use Sony J70 - emul works fine. But some slowly changing number when I use "Sel.Phone". When I use "Reset" - its normal ~10sec. After it ~15sec I cant use phone book. I think its normal too coz I use silvercard.

I can`t try Ericsson, coz nobody of my friends have it

Question - in SimEmu v6.01, I can put only one ICCID, or 10 for each number? If posible 10 - please send me adreses in EE.hex

Regards, Alex

There is a modified version of Sim-Emu 6.01 with the full support of 10 ICCID.
Also added:
· Switchable A3A8 counter
· Extensible Information/Actual Nr menu (TMSI, LAC and Cell ID indication was added)
· Configurable menu (removing of unnecessary items)
· ACC (Access Control Class) configuration
· Convenient ADN, SMS, FDN calculator
· Ability of removing the operator’s name and/or description.

Get it here: http://borozda.com/pic-ador

flashsat · 04-09-2005, 19:06

Any help please

Impossible to install Sim-Emu 6.01 in my Windows 98 SE

I have this message : SIM\-EMU6.01\instmsia.exe not found

Best regards

simemu · 04-11-2005, 21:52

Download this http://simemu.gsmhosting.net/utils/instmsiA.exe

Read here http://forum.gsmhosting.com/vbb/showthread.php?t=123603

monitel_service · 04-13-2005, 11:41

Hi i need schematic for SIM-EMU 6.01 BESTREGARDS [email protected]

meokey · 05-10-2005, 04:31

I can not see current number/name on my main screen of MOTO MPx220.

simemu · 05-10-2005, 18:02

Yes, that's a phone problem. This model is not capable to show the SPN record info of the SIM.

Regards

SaNTaNa · 05-10-2005, 21:28

@simemu

Don't u work for a new version of simemu? Could u add an ability to the simemu, I want to fix a line to a phone number. So when i activate to line2 i have to call only 1 number which i set. When i activate line1 it is possible to call every numbers. Is it possible to add this ability? if u may do, it will be great. Sorry my bad english.

Best Regards.

PN.ItalyGirl · 05-20-2005, 09:48

Hi SimEmu!

You are fantastic!

Can you help me to use more then 10 sim in a green card?
Have you seen here: http://borozda.com/pic-ador/
Is a good solution?

I'll wait for a SIMEMU 7 with 20 sim in one green card!

Gsmtechno · 05-21-2005, 00:06

thanks simemu ! we where waiting for that!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Revision SIM-EMU 6.02 (AVAILABLE)	simemu	Sim Cloning and Scaning	101	07-22-2023 11:48
A question about SIM-EMU 6.01!!!	hazzard	Sim Cloning and Scaning	4	10-09-2021 23:37
New SIM-EMU 6.01 with Arabic menu language	simemu	Sim Cloning and Scaning	17	09-03-2003 22:08
New SIM-EMU 6.01 with Slovak menu language	simemu	Sim Cloning and Scaning	0	08-20-2003 17:15
New revision SIM-EMU 4.01	simemu	Sim Cloning and Scaning	54	06-20-2002 06:49

12-29-2004, 05:58	#91 (permalink)
Surej No Life Poster Join Date: May 2002 Location: Wolverhampton UK Age: 54 Posts: 790 Member: 12296 Status: Offline Thanks Meter: 9	I programmed Greencard 2 with out any problems....only thing is it takes some time to switch between lines like it take around 2 min to change lines from one provider to other in an X100..but if you reset from menu and enter pin then it's fast... WBR Surej

01-26-2005, 19:48	#92 (permalink)
NBG Freak Poster Join Date: Jan 2001 Location: Beograd,Serbia Age: 54 Posts: 451 Member: 3101 Status: Offline Thanks Meter: 6	ON Nec 616 and Nec 313 phone kills green 2 card with 6.01 simemu.It asks for pin,after that goes to search network and phones kills pic content,Only way is to reprogram card again in programmator.Can you do something abouth this? Thanks

01-27-2005, 00:51	#93 (permalink)
JAVA Good No Life Poster Join Date: May 2004 Age: 54 Posts: 2,440 Member: 66136 Status: Offline Thanks Meter: 200	some one can tell me what is best software for read KI pls ? and the time for read it it's between X hours and X hours pls ? and sorry for my BAD english . regards, JAVA Good.

01-27-2005, 19:24	#94 (permalink)
simemu No Life Poster Join Date: Apr 2002 Location: Spain Age: 62 Posts: 855 Member: 10582 Status: Offline Thanks Meter: 99	@NBG I'll try to investigate the problem when I have one of these models. @JAVA Use Woron Scan Regards

03-16-2005, 15:30	#96 (permalink)
satzone Banned Join Date: Jan 2005 Location: On The Earth Posts: 189 Member: 107545 Status: Offline Thanks Meter: 44	Dear SimEmu I have your last SIM_EMU_6.01_CFG_v2.1.msi, but with some problems. Because in Nokia and Samsung X100 when i am selecting phone number from Sel.phone# then it is switching very well but in other sets is not switching to other number then i am going on other number after switch off/on, enter pin for other number and then number does work. You are requested to please give me your nice opinion on this problem that how i can solve this problem i.e. how i can switched an other number through Sel.phone# instead of switch off/on. An early attention is requested. SATZONE

04-09-2005, 19:06	#98 (permalink)
flashsat Junior Member Join Date: Apr 2005 Age: 49 Posts: 5 Member: 135709 Status: Offline Thanks Meter: 1	Any help please Impossible to install Sim-Emu 6.01 in my Windows 98 SE I have this message : SIM\-EMU6.01\instmsia.exe not found Best regards

04-11-2005, 21:52	#99 (permalink)
simemu No Life Poster Join Date: Apr 2002 Location: Spain Age: 62 Posts: 855 Member: 10582 Status: Offline Thanks Meter: 99	Download this http://simemu.gsmhosting.net/utils/instmsiA.exe Read here http://forum.gsmhosting.com/vbb/showthread.php?t=123603

04-13-2005, 11:41	#100 (permalink)
monitel_service Junior Member Join Date: Apr 2005 Age: 48 Posts: 9 Member: 136798 Status: Offline Thanks Meter: 2	Hi i need schematic for SIM-EMU 6.01 BESTREGARDS [email protected]

05-10-2005, 04:31	#101 (permalink)
meokey Junior Member Join Date: Mar 2005 Posts: 10 Member: 131974 Status: Offline Thanks Meter: 1	I can not see current number/name on my main screen of MOTO MPx220.

05-10-2005, 18:02	#102 (permalink)
simemu No Life Poster Join Date: Apr 2002 Location: Spain Age: 62 Posts: 855 Member: 10582 Status: Offline Thanks Meter: 99	Yes, that's a phone problem. This model is not capable to show the SPN record info of the SIM. Regards

05-10-2005, 21:28	#103 (permalink)
SaNTaNa Junior Member Join Date: Apr 2003 Posts: 22 Member: 27476 Status: Offline Thanks Meter: 2	@simemu Don't u work for a new version of simemu? Could u add an ability to the simemu, I want to fix a line to a phone number. So when i activate to line2 i have to call only 1 number which i set. When i activate line1 it is possible to call every numbers. Is it possible to add this ability? if u may do, it will be great. Sorry my bad english. Best Regards.

05-20-2005, 09:48	#104 (permalink)
PN.ItalyGirl Insane Poster Join Date: Apr 2005 Posts: 80 Member: 137168 Status: Offline Thanks Meter: 3	Hi SimEmu! You are fantastic! Can you help me to use more then 10 sim in a green card? Have you seen here: http://borozda.com/pic-ador/ Is a good solution? I'll wait for a SIMEMU 7 with 20 sim in one green card!

05-21-2005, 00:06	#105 (permalink)
Gsmtechno Freak Poster Join Date: Sep 2003 Location: FRANCE Age: 42 Posts: 436 Member: 39679 Status: Offline Thanks Meter: 41	thanks simemu ! we where waiting for that!